Experimental and computational thermodynamic study of ortho-, meta-, and para-methylbenzamide

The Knudsen mass-loss effusion technique was used to measure the vapour pressures of the three crystalline isomers of methylbenzamide. From the temperature dependence of the vapour pressures, the standard molar enthalpies of sublimation and the enthalpies of the intermolecular hydrogen bonds N−H⋯O were calculated. The temperature and molar enthalpy of fusion of the studied isomers were measured using differential scanning calorimetry. The values of the standard (p^° = 0.1 MPa) molar enthalpy of formation in the crystalline phase, at T = 298.15 K, of the compounds studied were derived from their standard massic energies of combustion measured by static-bomb combustion calorimetry. From the experimental values, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, were calculated and compared with the values estimated by employing computational calculations that were conducted using different quantum chemical methods: G3(MP2), G3, and CBS-QB3. Good agreement between experimental and theoretical results is verified. The aromaticity of the compounds has been evaluated through nucleus independent chemical shifts (NICS) calculations.     

Thermochemical study of 5-methyluracil, 6-methyluracil,and 5-nitrouracil

The standard (p° = 0.1 MPa) molar enthalpies of formation, in the crystalline phase, at T = 298.15 K, for 5-methyluracil, 6-methyluracil, and 5-nitrouracil were derived from the values of the standard massic energies of combustion measured by static bomb combustion calorimetry. The results obtained together with literature values of the enthalpies of sublimation yielded the standard molar enthalpies of formation, in gaseous phase, at T = 298.15 K. These values are discussed in the terms of structural enthalpic increments.     

Combined experimental and computational thermochemistry of isomers of chloronitroanilines

The standard (p^° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, of 4-chloro-3-nitroaniline and 5-chloro-2-nitroaniline, in the condensed phase, were derived from their standard molar energies of combustion, in oxygen, to yield CO₂(g), N₂(g), and HCl · 600H₂O(l), measured by rotating bomb combustion calorimetry. From the temperature dependence of the vapour pressures of these compounds, measured by the Knudsen effusion technique, their standard molar enthalpies of sublimation, at T = 298.15 K, were derived by means of the Clausius–Clapeyron equation. The Calvet microcalorimetry was also used to measure the standard molar enthalpies of sublimation of these compounds, at T = 298.15 K. The combination of the standard molar enthalpies of formation in the condensed phases and the standard molar enthalpies of sublimation yielded the standard molar enthalpies of formation in the gaseous phase at T = 298.15 K for each isomer. Further, the standard (p^° = 0.1 MPa) molar enthalpies, entropies and Gibbs free energies of sublimation, at T = 298.15 K, were also derived.The standard molar enthalpies of formation, in the gaseous phase of all the chloronitroaniline isomers were also estimated by the Cox scheme and by the use of computational thermochemistry and compared with the available experimental values.     

Experimental and computational thermochemistry of the dihydroxypyridine isomers

The standard (p^∘ = 0.1 MPa) molar enthalpy of formation for crystalline 2,3-dihydroxypyridine was measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpy of sublimation, at T = 298.15 K, was obtained using Calvet microcalorimetry. These values were used to derive the standard molar enthalpy of formation of 2,3-dihydroxypyridine in gaseous phase, at T = 298.15 K, –(263.9 ± 4.6) kJ · mol⁻¹.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets have been performed for all dihydroxypyridine isomers to determine the thermochemical order of stability of these systems. The agreement between experiment and theory for the 2,3-dihydroxypyridine isomer gives confidence to the estimates of the enthalpies of formation concerning the other five isomers. It is found that the enthalpic increment for the dihydroxy substitution of pyridine is equal to the sum of the respective enthalpic increment of the monosubstituted pyridines.     

Experimental and computational thermochemistry of 1-phenylpyrrole and 1-(4-methylphenyl)pyrrole

The standard (p° = 0.1 MPa) molar enthalpies of formation, in the crystalline phase, of 1-phenylpyrrole and 1-(4-methylphenyl)pyrrole, at T = 298.15 K, were derived from the standard molar energies of combustion in oxygen, measured by static-bomb combustion calorimetry. For these compounds, the standard molar enthalpies of sublimation, at T = 298.15 K, were determined from the temperature–vapour pressure dependence, obtained by the Knudsen mass-loss effusion method. Using estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds, the standard (p° = 0.1 MPa) molar enthalpies, entropies, and Gibbs energies of sublimation, at T = 298.15 K, were derived. From the experimental values, the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, were calculated.Additionally, the enthalpies of formation of both compounds were estimated using the composite G3(MP2)//B3LYP approach together with adequate gas-phase working reactions. There is a very good agreement between computational and experimental results.     

Calorimetric study of 2′-methylacetophenone and 4′-methylacetophenone

Values of the condensed phase standard (p = 0.1 MPa) molar enthalpy of formation for 2′- and 4′-methylacetophenones were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The values of the standard molar enthalpy of vaporization, at T = 298.15 K, were measured by Calvet microcalorimetry. Combining these two values, the following enthalpies of formation in the gas phase, at T = 298.15 K, were then derived: 2′-methylacetophenone, –(115.7 ± 2.4) kJ · mol⁻¹, and 4′-methylacetophenone, –(122.6 ± 2.4) kJ · mol⁻¹. Substituent effects are discussed in terms of stability and compared with other similar compounds. The value of the standard molar enthalpy of formation for 3′-methylacetophenone was estimated from isomerization schemes.     

Experimental and theoretical thermochemistry of β-tetralone

The standard (p^° = 0.1 MPa) molar enthalpy of formation β-tetralone was measured, at T = 298.15 K, by static bomb calorimetry and the standard molar enthalpy of vaporization, at T = 298.15 K, was obtained using Calvet microcalorimetry.These values were used to derive the standard molar enthalpy of formation of the compound in the gaseous phase, at T = 298.15 K, ?(75.2 ± 2.5) kJ · mol^?1.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy function with extended basis sets and more accurate correlated computational techniques of the MCCM/3 suite have been performed.     

Experimental and computational study of the thermodynamic properties of 2-nitrofluorene and 2-aminofluorene

This report presents a comprehensive experimental and computational study of the thermodynamic properties of two fluorene derivatives: 2-aminofluorene and 2-nitrofluorene. The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline phase of these compounds were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. A Knudsen effusion method was used to perform the vapour pressure study of the referred compounds, yielding an accurate determination of the standard molar enthalpies and entropies of sublimation. The enthalpies of sublimation were also determined using Calvet microcalorimetry and the enthalpy and temperature of fusion were derived from DSC experiments. Derived results of standard enthalpy and Gibbs energy of formation in both gaseous and crystalline phases were compared with the ones reported in literature for fluorene. A theoretical study at the G3 and G4 levels has been carried out, and the calculated enthalpies of formation have been compared to the experimental values.     

Combined experimental and computational study on the energetics of 1,2-benzisothiazol-3(2H)-one and 1,4-benzothiazin-3(2H, 4H)-one

The present work reports an experimental and computational study of the energetics of 1,2-benzisothiazol-3(2H)-one and 1,4-benzothiazin-3(2H, 4H)-one. The standard (p° = 0.1 MPa) massic energy of combustion, at T = 298.15 K, of each compound was measured by rotating bomb combustion calorimetry, in oxygen that allowed the calculation of the respective standard molar enthalpy of formation, in the condensed phase, at T = 298.15 K. The standard molar enthalpies of sublimation, at T = 298.15 K, were measured by high-temperature Calvet microcalorimetry. From the combination of data obtained by both techniques we have calculated the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K. In addition, computational calculations were carried using the density functional theory with the B3LYP functional and the 6-31G1 basis set and some correlations between structure and energetics were obtained for the keto and enol forms of both compounds. Using the G3(MP2)//B3LYP composite method and various appropriate reactions, the standard molar enthalpies of formation of 1,2-benzisothiazol-3(2H)-one and 1,4-benzothiazin-3(2H, 4H)-one, at T = 298.15 K, were computationally derived and compared with the experimental data. The aromaticity of 1,2-benzisothiazol-3(2H)-one, 1,4-benzothiazin-3(2H, 4H)-one and that of some related species was evaluated by analysis of nucleus independent chemical shifts (NICS).     

Calorimetric and computational study of 7-hydroxycoumarin

The standard (p° = 0.1 MPa) molar energy of combustion in oxygen, at T = 298.15 K, of 7-hydroxycoumarin was measured by static bomb calorimetry. The value of the standard molar enthalpy of sublimation was obtained by Calvet microcalorimetry and corrected to T = 298.15 K. Combining these results, the standard molar enthalpy of formation of the compound, in the gas phase, at T = 298.15 K, has been calculated, ?(337.5 ± 2.3) kJ · mol^?1. The values for the temperature of fusion, T_fusion, and for the fusion enthalpy, at T = T_fusion, are also reported.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets, the MC3BB and MC3MPW methods and more accurate correlated computational techniques of the MCCM suite have been performed for the compound.The agreement between experiment and theory gives confidence to estimate the enthalpy of formation of the remaining hydroxycoumarins substituted in the benzene ring.     

Standard molar enthalpies of combustion of five trans -dimethoxycinnamic acids

The standard (p^o =  0.1 MPa) molar enthalpies of formation for 2,3-, 2,4-, 2,5-, 3,4- and 3,5- trans -dimethoxycinnamic acids, in the gaseous phase, were derived from the standard molar enthalpies of combustion in oxygen, of the crystalline compounds, determined by static bomb combustion calorimetry at T =  298.15 K and from the literature values for the respective enthalpies of sublimation.     

Experimental and computational thermochemical studies of 9-R-xanthene derivatives (ROH,COOH, CONH2)

In the present work, the standard (p° = 0.1 MPa) molar enthalpies of formation of xanthydrol, 9-xanthenecarboxylic acid and 9-xanthenecarboxamide, in the gaseous state, at T = 298.15 K, were determined by experimental and computational studies. The experimental techniques used were the static-bomb combustion calorimetry, which enabled the determination of the standard molar enthalpy of formation, in the crystalline state, and the vacuum drop microcalorimetric and the Knudsen effusion techniques used to derive the enthalpy of sublimation. For comparison purposes, we performed standard ab initio molecular orbital calculations, using the G3(MP2)//B3LYP composite procedure, of the enthalpies of several homodesmotic reactions, allowing to extract the standard molar enthalpies of formation, in the gaseous state, of the three xanthene derivatives considered in this work. The calculated results are in good agreement with the experimental data.     

3,4,5-Trimethoxyphenol: A combined experimental and theoretical thermochemical investigation of its antioxidant capacity

The standard (p^° = 0.1 MPa) molar enthalpies of combustion and sublimation of 3,4,5-trimethoxyphenol were measured, respectively, by static bomb combustion calorimetry in oxygen atmosphere and by Calvet microcalorimetry. From these measurements, the standard molar enthalpy of formation in both the crystalline and gaseous phase, at T = 298.15 K, were derived: ?(643.4 ± 1.9) kJ · mol^?1 and ?(518.1 ± 3.6) kJ · mol^?1, respectively. Density functional theory calculations for this compound and respective phenoxyl radical and phenoxide anion were also performed using the B3LYP functional and extended basis sets, which allowed the theoretical estimation of the gaseous phase standard molar enthalpy of formation through the use of isodesmic reactions and the calculation of the homolytic and heterolytic O–H bond dissociation energies. There is good agreement between the calculated and experimental enthalpy of formation. Substituent effects on the homolytic and heterolytic O–H bond dissociation energies have been analysed.     

Thermochemistry of some methoxypyridines

The standard (p^o = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, for the liquids 2-methoxypyridine, 4-methoxypyridine and 2,6-dimethoxypyridine were determined by static bomb combustion calorimetry. The standard molar enthalpies of vaporization, at T = 298.15 K, were measured by Calvet microcalorimetry. The standard (p^o = 0.1 MPa) molar enthalpies of formation of the three compounds studied, in the gaseous phase, at T = 298.15 K have been derived from the corresponding standard molar enthalpies of formation in the liquid phase and the standard molar enthalpies of vaporization, yielding ((−42.7 ± 1.9), (−18.2 ± 1.8) and (−233.5 ± 1.8)) kJ · mol⁻¹, for 2-methoxypyridine, 4-methoxypyridine and 2,6-dimethoxypyridine, respectively.     

2,1,3-Benzothiadiazole: Study of its structure,energetics and aromaticity

The present work reports an experimental study on the energetics of 2,1,3-benzothiadiazole and a computational study on its structure, energetics and aromaticity. In the experimental part the standard (p° = 0.1 MPa) massic energy of combustion, at T = 298.15 K, was measured by rotating bomb combustion calorimetry, in oxygen, and allowed the calculation of the respective standard molar enthalpy of formation, in the crystalline phase, at T = 298.15 K. The standard molar enthalpy of sublimation, at T = 298.15 K, was measured by high-temperature Calvet microcalorimetry. From the combination of data obtained by both techniques we were able to calculate the respective standard molar enthalpy of formation, in the gas phase, at T = 298.15 K: (276.6 ± 2.5) kJ · mol⁻¹. This thermochemical parameter was compared with estimates obtained from high level ab initio quantum chemical calculations using the G3(MP2)//B3LYP composite method and various appropriately chosen reactions. The molecular structure of 2,1,3-benzothiadiazole was obtained from DFT calculations with the B3LYP density functional and various basis sets: 6-31G(d), 6-311(d,p), 6-311+G(3df,2p), aug-ccpVTZ and aug-ccpVQZ and its aromaticity and that of some related molecules were evaluated by analysis of nucleus independent chemical shifts (NICS) values.     

Molecular energetics of 4-methyldibenzothiophene: An experimental study

The standard ($p^{°}=0.1\text{MPa}$) molar enthalpy of formation of 4-methyldibenzothiophene, in the gaseous phase, at T = 298.15 K, was derived from the combination of the values of the standard molar enthalpy of formation, in the crystalline phase, at T = 298.15 K, and the standard molar enthalpy of sublimation, at the same temperature. The standard molar enthalpy of formation in the crystalline phase, determined from the standard massic energy of combustion, in oxygen, is (70.9 ± 4.8) kJ · mol^?1 and was measured by rotating-bomb combustion calorimetry. From Calvet microcalorimetry measurements, the standard molar enthalpy of sublimation obtained is (90.3 ± 0.7) kJ · mol^?1.     

Thermochemical study of the isomeric compounds: 3-acetylbenzonitrile and benzoylacetonitrile

The standard (p° = 0.1 MPa) molar enthalpies of formation of 3-acetylbenzonitrile and benzoylacetonitrile, in the crystalline phase, were derived from the respective standard massic energies of combustion measured by static bomb combustion calorimetry, in oxygen, at T = 298.15 K. The standard molar enthalpies of sublimation, at T = 298.15 K, were measured by Calvet microcalorimetry. From the above experimentally determined enthalpic parameters, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, are found to be: (52.4 ± 2.1) kJ · mol⁻¹ and (74.8 ± 2.5) kJ · mol⁻¹ for 3-acetylbenzonitrile and benzoylacetonitrile, respectively.Molecular structures were computed using highly accurate ab initio techniques. Standard molar enthalpies of formation of the experimentally studied compounds were derived using an appropriate set of working reactions. Very good agreement between the calculated and the experimental values was obtained, so the calculations were extended to the estimates of the standard molar enthalpies of formation of 2- and 4-acetylbenzonitriles whose study was not performed experimentally.Our results were further interpreted and rationalized in terms of the enthalpic stability and compared to other relevant disubstituted benzenes.     

Thermodynamic properties of the methyl esters of p-hydroxy and p-methoxy benzoic acids

The vapor pressures of crystalline and liquid phases of methyl p-hydroxybenzoate and of methyl p-methoxybenzoate were measured over the temperature ranges (338.9 to 423.7) K and (292.0 to 355.7) K respectively, using a static method based on diaphragm capacitance gauges. The vapor pressures of the crystalline phase of the former compound were also measured in the temperature range (323.1 to 345.2) K using a Knudsen mass-loss effusion technique. The results enabled the determination of the standard molar enthalpies, entropies and Gibbs free energies of sublimation and of vaporization, at T = 298.15 K, as well as phase diagram representations of the (p, T) experimental data, including the triple point. The temperatures and molar enthalpies of fusion of both compounds were determined using differential scanning calorimetry and were compared with the results indirectly derived from the vapor pressure measurements. The standard (p° = 10⁵ Pa) molar enthalpies of formation, in the crystalline phase, at T = 298.15 K, of the compounds studied were derived from their standard massic energies of combustion measured by static-bomb combustion calorimetry. From the experimental results, the standard molar enthalpies of formation, in the gaseous phase at T = 298.15 K, were calculated and compared with the values estimated by employing quantum chemical computational calculations. A good agreement between experimental and theoretical results is observed. To analyze the thermodynamic stability of the two compounds studied, the standard Gibbs free energies of formation in crystalline and gaseous phases were undertaken. The standard molar enthalpies of formation of the title compounds were also estimated from two different computational approaches using density functional theory-based B3LYP and the multilevel G3 methodologies.     

Experimental study on the thermochemistry of 1-(2H)-phthalazinone and phthalhydrazide

The standard (p^° = 0.1 MPa) molar enthalpies of combustion of 1-(2H)-phthalazinone and phthalhydrazide, both in the solid phase, were measured at T = 298.15 K by static bomb calorimetry. Further, the standard molar enthalpies of sublimation, at T = 298.15 K, of these two phthalazine derivatives were derived from the Knudsen effusion technique. The combustion calorimetry results together with those obtained from the Knudsen effusion technique, were used to derive the standard molar enthalpies of formation, at T = 298.15 K, in the gaseous phase for 1-(2H)-phthalazinone and phthalhydrazide, respectively as, (79.1 ± 1.8) kJ · mol^?1 and ?(107.4 ± 2.4) kJ · mol^?1.     

Energetic and structural properties of 4-nitro-2,1,3-benzothiadiazole

The energetic study of 4-nitro-2,1,3-benzothiadiazole has been developed using experimental techniques together with computational approaches. The standard (p^° = 0.1 MPa) molar enthalpy of formation of crystalline 4-nitro-2,1,3-benzothiadiazole (181.9 ± 2.3 kJ · mol⁻¹) was determined from the experimental standard molar energy of combustion −(3574.3 ± 1.3) kJ · mol⁻¹, in oxygen, measured by rotating-bomb combustion calorimetry at T = 298.15 K. The standard (p^° = 0.1 MPa) molar enthalpy of sublimation, at T = 298.15 K, (101.8 ± 4.3) kJ · mol⁻¹, was determined by a direct method, using the vacuum drop microcalorimetric technique. From the latter value and from the enthalpy of formation of the solid, it was calculated the standard (p^° = 0.1 MPa) enthalpy of formation of gaseous 4-nitro-2,1,3-benzothiadiazole as (283.7 ± 4.9) kJ · mol⁻¹. Standard ab initio molecular orbital calculations were performed using the G3(MP2)//B3LYP composite procedure and several working reactions in order to derive the standard molar enthalpy of formation 4-nitro-2,1,3-benzothiadiazole. The ab initio results are in good agreement with the experimental data.