New carbon nanofiber/graphite felt composite for use as a catalyst support for hydrazine catalytic decomposition

Graphite felt supporting 40 nm diameter carbon nanofibers was synthesized and successfully used as a support for a high loaded iridium catalyst (30 wt%) in the decomposition of hydrazine; a strong mechanical resistance and a high thermal conductivity led to a very efficient and stable catalyst as compared to that used industrially, iridium supported on a high surface area alumina.     

Selective Hydrogenation of Citral over a Carbon‐titania Composite Supported Palladium Catalyst

A novel carbon‐titania composite material, C/TiO₂, has been prepared by growing carbon nanofibers (CNFs) on TiO₂ surface via methane decomposition using Ni‐Cu as a catalyst. The C/TiO₂ was used for preparing supported palladium catalyst, Pd/C/TiO₂. The support and Pd/C/TiO₂ catalyst were characterized by BET, SEM, XRD and TG‐DTG. Its catalytic performance was evaluated in selective hydrogenation of citral to citronellal, and compared with that of activated carbon supported Pd catalyst. It was found that the Pd/C/TiO₂ catalyst contains 97% of mesopores. And it exhibited 88% of selectivity to citronellal at citral conversion of 90% in citral hydrogenation, which was much higher than that of activated carbon supported Pd catalyst. This result may be attributed to elimination of internal diffusion limitations, which were significant in activated carbon supported Pd catalyst, due to its microporous structure.     

Properties of Pd–Ag/C catalysts in the reaction of selective hydrogenation of acetylene

Samples of Pd/C and Pd–Ag/C, where C represents carbon nanofibers (CNFs), are synthesized by methane decomposition on a Ni–Cu–Fe/Al₂O₃ catalyst. The properties of Pd/CNF are studied in the reaction of selective hydrogenation of acetylene into ethylene. It is found that the activity of the catalyst in hydrogenation reaction increases, while selectivity decreases considerably when the palladium content rises. The obtained dependences are caused by the features of palladium’s interaction with the carbon support. At a low Pd content (up to 0.04 wt %) in the catalyst, the metal is inserted into the interlayer space of graphite and the catalytic activity is zero. It is established by EXAFS that the main share of palladium in catalysts of 0.05–0.1 wt % Pd/CNF constitutes the metal in the atomically dispersed state. The coordination environment of palladium atoms consists of carbon atoms. An increase in the palladium content in a Pd/CNF catalyst up to 0.3 wt % leads to the formation of highly dispersed (0.8–1 nm) Pd particles. The Pd/CNF samples where palladium is mainly in the atomically dispersed state exhibit the highest selectivity in the acetylene hydrogenation reaction. The addition of silver to a 0.1 wt % Pd/CNF catalyst initially probably leads to the formation of Pd–Ag clusters and then to alloyed Pd–Ag particles. An increase in the silver content in the catalyst above 0.3% causes the enlargement of the alloyed particles and the palladium atoms are blocked by a silver layer, which considerably decreases the catalytic activity in the selective hydrogenation of acetylene.     

Modification of a phase-inhomogeneous alumina support of a palladium catalyst. Part II: the effect of palladium dispersion on the formation of hydride forms,electronic state,and catalytic performance in the reaction of partial hydrogenation of unsaturated hydrocarbons

It was shown for the first time that amorphous phase in an alumina support promotes the formation of palladium particles in a wide size range. This catalyst has a low selectivity to butenes in the 1,3-butadiene hydrogenation. It was suggested that surface palladium aluminates contribute to an increase in butene selectivity up to 99.5% at a hydrogenation temperature of not more than 65 °C. At higher reaction temperatures, the catalyst based on phase-homogeneous γ-Al₂O₃ has the highest activity and butene selectivity. This catalyst was obtained by the traditional impregnation method and contains highly dispersed palladium particles with a sufficiently high electron density. It was shown that the formation of hydride forms on palladium particles with a size of less than 1 nm was detected by temperature-programmed reduction with hydrogen.     

Effect of hydrothermal treatment on the physicochemical characteristics of Pd/C composites prepared <Emphasis Type="Italic">via</Emphasis> pyrolysis of sawdust impregnated with palladium nitrate

Palladium supported on carbon (Pd/C) catalysts (0.55–0.65 wt.% of Pd) were synthesized by pyrolysis of birch sawdust under inert atmosphere proceeded by prolonged impregnation of sawdust in aqueous solution of palladium nitrate. In some cases, hydrothermal treatment (HT) of the pristine sawdust was conducted to modify the specific surface area of the final carbon material applied as a catalyst support. Based on low-temperature nitrogen adsorption technique, it was postulated that HT of sawdust in the liquid phase increases. while HT in the gaseous phase decreases the specific surface area of Pd/C. The obtained catalysts contained Pd particles (size ranged from 2 to 10 nm) both coated and not coated with carbon shell as evidenced by XPS and TEM techniques. The synthesized Pd/C composites provide high conversion of chlorobenzene and high selectivity in respect to benzene in hydrodechlorination reaction performed in a flow fixed-bed reactor in the presence of H₂. XPS data for Pd/C composites tested in the catalytic reaction indicate their high resistance to HCl. A minor part of metal Pd was found to transform into PdCl₂ and PdO.     

Preparation,structural characterization of a novel egg-shell palladium sulfide catalyst and its application in selective reductive alkylation reaction

A novel egg-shell Pd-S catalyst with palladium metal as the core and a membrane of palladium sulfide as the surface has been prepared by sulphidizing Pd/C with H₂S.This catalyst is effective for the reductive alkylation of p-amino diphenylamine（PADPA） and methylisobutyl ketone（MIBK） to afford N-（1,3-dimethylbutyl）-N′-phenyl-p-phenylenedianine（DBPPD） with conversion up to 99.42%and selectivity to 97.46%.Comparing with the other common palladium sulfide catalysts,the membrane of palladium sulfide on the surface and the core of palladium metal cause the Pd on the surface of the new catalyst in a lower sulfur coordination, which improves its activity.Our result indicates that this new egg-shell Pd-S/C is an efficient hydrogenation catalyst.     

The controllable preparation of electrospun carbon fibers supported Pd nanoparticles catalyst and its application in Suzuki and Heck reactions

The palladium nanoparticles/carbon nanofibers(Pd NPs/CNFs) catalyst was prepared by the electrospinning method, the hydrazine hydrate solution reduction in an ice bath environment, the high temperature carbonization. The catalyst was characterized by X-ray diffraction(XRD), fieldemission scanning electron microscope(FE-SEM), and transmission electron microscopy(TEM). The nanofibers are not cross-linked and arranged in order. The surface of Pd NPs/CNFs is smooth, and it can be observed that a large number of particles were loaded and well-dispersed in carbon fiber matrix, and the particle distribution is uniform. The activity center of catalyst is Pd(0). The Pd NPs/CNFs exhibited a high efficiency, good reusability and stability in the Suzuki and Heck reactions. It can be used for at least five consecutive runs without significant loss of its catalytic activity. The good recyclability of Pd NPs/CNFs provides a way to greatly reduce the cost of the catalyst.     

Synthesis of highly dispersed Pd/C electro-catalyst with high activity for formic acid oxidation

In this study, we present a simple process to obtain highly dispersed palladium nanoparticles on Vulcan XC-72R carbon support without any protective agent. To obtain high metal loading Pd/C catalyst without any surfactant, we modified the polyol process by employing NH₃ species as a mediation to control the reaction pathway to avoid the precipitation of Pd(OH)₂, and hence the agglomeration of Pd nanoparticles. The obtained Pd/C sample was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques. The results show that highly dispersed Pd/C catalyst with an average diameter of 3.0 nm could be obtained in this novel process. The activity of formic acid oxidation on this Pd/C catalyst was examined via cyclic voltammetry technique and it is found that the catalytic activity is greatly enhanced due to the reduced particle size and the improved dispersion of palladium nanoparticles on the carbon surface.     

Carbon nanofibers grown on sodalime glass at 500°C using thermal chemical vapor deposition

Carbon nanofibers are grown homogeneously on a large area of nickel-deposited sodalime glass substrate by thermal chemical vapor deposition of acetylene at 500°C. The diameters of carbon nanofibers are uniformly distributed in the range between 50 and 60 nm. Most of the carbon nanofibers are curved or bent in shape, but some fractions are twisted. They consist of defective graphitic sheets with a herringbone morphology. The maximum emission current density from the carbon nanofibers is 0.075 mA/cm² at 16 V/μm, which is sufficient for commercializing the carbon-nanofibers-based field emission displays.     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Synthesis of 1-ethylpyrrolidone-2 by hydrogenation of 1-vinylpyrrolidone-2 over a Pd/C catalyst

A selective catalytic system for the hydrogenation of 1-vinylpyrrolidone-2 (VP) to 1-ethylpyrrolidone-2 (EP) is found. The factors responsible for the formation of by-products in the conversion of VP are studied. The presence of acid sites or radical species in a catalytic system results in the fast polymerization of VP. The resulting by-product, poly vinylpyrrolidone, may deactivate the hydrogenation catalyst by surface blocking. VP can be hydrogenated to EP under mild conditions and with a high selectivity using a palladium catalyst supported on a porous carbon material Sibunit. The kinetics of VP hydrogenation over the Pd/C catalyst is studied.     

Palladium nanoparticles stabilized by chitosan/PAAS nanofibers: A highly stable catalyst for Heck reaction

Palladium chloride doped chitosan composite nanofibers were prepared by electrospinning with sodium polyacrylate (PAAS) as the co-spinning agent. The composite nanofibers are subsequently treated at elevated temperature to improve their solvent resistance. The Pd (II) cations inside the composite nanofibers were reduced into uniform palladium nanoparticles (Pd NPs) with mean diameter of ~4.93 nm. These Pd NPs inside the chitosan composite nanofibers exhibited excellent catalytic activity for Heck reactions of aromatic iodides with alkenes with yields over 85%. Moreover, due to the fibrous structure, this novel fibrous palladium catalyst could be readily recovered by simple filtration and reused for 18 times without loss of initial catalytic activity. It was found that the reactants could readily diffuse from the reaction solution to the active Pd NPs inside the nanofibers and the products could departure from composite fibers into the reaction solution, while the Pd NPs were tightly restricted inside the chitosan composite nanofibers.     

富氧条件下生物质基活性炭负载钾催化剂高选择性还原氮氧化物

研究了富氧环境中生物质基活性炭负载钾催化剂选择性还原氮氧化物的性能。结果表明,与煤基（褐煤）活性炭负载钾催化剂相比,生物质基（木屑）活性炭负载钾催化剂表现出高选择性还原NO能力,在2 h恒温稳态实验过程中能够保持80%的NO还原效率,而C-O₂反应活性仅为18%。X射线衍射、比表面积、X射线光电子能谱以及程序升温脱附实验表征结果显示,生物质基活性炭负载钾催化剂优异的选择性还原NO性能应归因于炭表面钾物种的高度分散性,这与催化剂的高比表面积以及大量的表面氧基团有关。另外,生物质基炭材料还原NO反应产物中具有较高的CO₂选择性。     

Catalytic activity of palladium supported on single wall carbon nanotubes compared to palladium supported on activated carbon Study of the Heck and Suzuki couplings, aerobic alcohol oxidation and selective hydrogenation

Nanoparticles (2–10 nm) of palladium have been deposited on single wall carbon nanotubes (SWNT) by spontaneous reduction from Pd(OAc)₂ or from oxime carbapalladacycle. These catalysts exhibit higher catalytic activity than palladium over activated carbon (Pd/C) for the Heck reaction of styrene and iodobenzene and for the Suzuki coupling of phenylboronic and iodobenzene. This fact has been attributed as reflecting the dramatic influence of the size particle on the activity of the palladium catalyst for CC bond forming reactions as compared to other reaction types less demanding from the point of view of the particle size. Thus, in contrast to the Heck and Suzuki reactions, Pd/C is more active than palladium nanoparticles deposited on SWNT for the catalytic oxidation by molecular oxygen of cinnamyl alcohol to cinnamaldehyde and for the hydrogenation of cinnamaldehyde to 3-phenylpropionaldehyde.     

聚苯胺-改性木质素磺酸钠复合材料基活性炭负载Pd催化剂对甲酸氧化的催化性能

将聚苯胺/改性木质素磺酸钠复合材料在不同炭化温度下进行处理得到活性炭材料，利用红外光谱、拉曼光谱、比表面积分析和扫描电镜等手段对其结构和表面性质进行了表征。通过液相还原方法将Pd纳米颗粒负载在所制备的活性炭材料上，获得Pd/C催化剂用于甲酸氧化，并采用X射线衍射、透射电镜和电化学测试等方法对该Pd/C催化剂进行表征。结果表明，以800℃下炭化得到的活性炭材料为载体所制备的Pd-AC800催化剂其催化性能最优；Pd粒径为5.4 nm，电化学活性面积为53.78 m²/g。由于在该催化剂上甲酸氧化通过直接途径进行，Pd-AC800可用作直接甲酸燃料电池的催化剂。     

Hydrogenation of benzophenone by carbon-supported Pd catalysts

Catalytic activity of palladium catalysts with two different types of carbon support, Norit (an activated carbon), and bamboo-shaped carbon nanotubes (BCNT) have been tested for benzophenone hydrogenation. The selectivity toward the two possible reaction products (benzhydrol and diphenylmethane) can be directed by the catalyst support. It has been found that the Norit support preferred the over-hydrogenation of benzhydrol to diphenylmethane. The BCNT support proved to be much more selective and resulted as much as 99.3% benzhydrol selectivity at 96.3% benzophenone conversion. The high benzhydrol selectivity might be explained by the presence of covalently bonded nitrogen atoms in the catalyst (BCNT: 6.19 w/w%, Norit 0.54 w/w%) that can inhibit the over-hydrogenation process, thereby BCNTs are better catalyst supports for benzhydrol production than the commonly used activated carbon–supported catalysts.     

Copper nanoparticles incorporated on a mesoporous carbon nitride,an excellent catalyst in the Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles

Cu nanoparticles with average particles size around 10 nm were incorporated on the surface of a mesoporous carbon nitride support. The XRD and N₂ adsorption isotherms show that it maintains a hexagonal mesoporous structure with a high surface area (600.03 m² g^?1). The embedded Cu nanoparticles exhibit extremely high catalytic performance in two different kinds of organic reactions. The Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles were all accomplished.     

A Novel Sul ded Mo/C Catalyst for Direct Vapor Phase Carbonylation of Methanol at Atmospheric Pressure

The direct carbonylation of methanol, without any halide in the feed as a promoter, is presented. A series of Mo catalysts supported on activated carbon, y-Al2O3 and SiO2 were prepared. The results show that the support greatly affects the Mo catalyst in the direct vapor-phase carbonylation of methanol, and activated carbon is the best supports of the investigated supports. In addition, the relationships between adsorptions of NH3 and CO and carbonylation of methanol were investigated. A novel sulfided Mo/C catalyst had high activity and selectivity for the vapor phase carbonylation of methanol to methyl acetate without the addition of a CH3I promoter to the feed. The reaction conditions were optimized at a reaction temperature of 573 K, a methanol concentration of 23 mol% and a carbon monoxide space velocity of 3,000 L/(kg-h). Under these optimal conditions a methanol conversion of 50%, carbonylation selectivity of 80 mol%, and space-time yield of 8.0 mol/(kg-h) were obtained. The active phase of this     

Celite‐Polyaniline supported palladium catalyst for chemoselective hydrogenation reactions

Polyaniline coated on particles of celite is used as support to load palladium catalyst. This heterogenized Celite?PANI?Pd system, is used as an efficient catalyst for chemoselective hydrogenation reactions. The catalyst is characterized by usual spectral, analytical techniques and studied for hydrogenation reactions at ambient conditions. The mild reaction conditions allow the control over the reactions and excellent selectivity is achieved in number of conversions. Hydrogenation of a carbon–carbon double bond was favored over other polar π‐bond systems, while labile functional groups such as benzyl ether, benzyl esters, cyano, nitro and halogen remained unaffected. Primary amines were converted to N,N‐dimethyl amines with formaldehyde, the double bond of coumarin was selectively hydrogenated without opening of the lactone functionality.     

氮掺杂有序介孔碳负载超小尺寸铂纳米颗粒催化硝基苯类化合物选择加氢

氮掺杂有序介孔碳材料不仅具有高的比表面积、大的孔容和均一可调的孔径等优点,其骨架中丰富的氮原子还可以对材料的物理化学性质、配位金属电荷密度等进行调控,是一类优异的催化剂载体.本文利用软模板(嵌段共聚物F127为模板),以间氨基苯酚为碳源和氮前体,制备出较高含氮量(9.58 wt%)和比表面积(417 m2/g),以及规则孔径分布的介孔碳材料.结果表明,制备的材料具有三维立方相结构.以该碳材料作为载体,使用传统浸渍氢气还原的策略负载纳米铂颗粒.发现氮掺杂的载体能够有效控制金属纳米颗粒的尺寸,可实现超小尺寸Pt纳米颗粒的有效负载(1.0±0.5 nm),且纳米颗粒均匀分布于介孔碳材料的孔道中.相比而言,使用相同负载方法的情况下,以不掺氮的介孔碳材料为载体,纳米粒子的尺寸较难控制(4.4±1.7 nm)且会发生孔道外颗粒聚集的情况.研究表明,骨架中的氮原子与金属间弱的相互作用对纳米粒子有稳定作用.这对制备超小尺寸的金属纳米粒子催化剂具有一定的指导意义.此外,由于纳米粒子的尺寸将大大影响催化剂活性中心的暴露程度,进而影响催化剂活性.因此,我们以硝基苯类化合物的氢化反应来评价该催化剂的催化性能.在室温和1 MPa H2的温和条件下,氮掺杂的介孔碳负载催化剂表现出了优异的催化性能.反应0.5 h,对氯硝基苯可完全转化,且选择性高达99%.相比而言,商业化的Pt/C催化剂上反应的转化率和选择性分别为89%和90%.其它传统催化剂的比较,如Pt/SiO2,Pt/TiO2,同样表明,氮掺杂介孔碳负载的催化剂具有更优异的催化性能.在相同反应条件下,Pt/SiO2催化剂只能得到46%的转化率和93%的选择性,而Pt/TiO2催化剂虽然能够实现完全转化,但选择性也仅为91%.由此可见,氮掺杂的负载催化剂可大大提高反应活性和选择性,能有效抑制脱氯现象的发生.这种高的催化性能可能与催化剂的介孔结构、氮功能化载体以及超小尺寸的Pt纳米粒子的稳定有关.由于氮原子和介孔孔道的限域作用,氮掺杂介孔碳负载的催化剂也具有良好的催化稳定性,循环使用10次后,催化活性和选择性几乎没有下降.结果表明,循环使用后的催化剂金属粒子尺寸变化不大,进一步表明氮掺杂介孔碳载体对金属纳米颗粒的稳定作用.