规整Mn-Zn-Mg-Al-CO3四元LDHs层状材料的水热合成、结构及性能

以Mn(NO3)2.6H2O、Zn(NO3)2.6H2O、Mg(NO3)2.6H2O和Al(NO3)3.9H2O为原料,采用水热合成法,一步合成了Mn-Zn-Mg-Al-CO3四元LDHs层状材料。采用ICP、元素分析仪、XRD、FTIR、TG-DSC、SEM、低温氮吸附-脱附等对样品进行了表征。探讨了pH值、反应温度、反应时间和原料配比对Mn-Zn-Mg-Al-CO3四元LDHs层状材料合成的影响。结果表明,在pH=10、反应温度控制在140℃、反应时间为24 h的条件下,可以合成出结构规整、晶形良好、各层间排列紧密有序的含不同比例金属阳离子的Mn-Zn-Mg-Al-CO3四元LDHs层状材料。其吸附等温线符合V型吸附,H3滞后环,晶体内层间存在2 nm以上的孔,晶体内部结构的有序性高,层间碳酸根离子的排列整齐,通道内孔密度大、孔径小、比表面积大。     

Dual shell-like magnetic clusters containing Ni(II) and Ln(III) (Ln = La, Pr, and Nd) ions

Dual shell-like nanoscopic magnetic clusters featuring a polynuclear nickel(II) framework encapsulating that of lanthanide ions (Ln = La, Pr, and Nd) were synthesized using Ni(NO3)(2).6H2O, Ln(NO3)(3).6H2O, and iminodiacetic acid (IDA) under hydrothermal conditions. Structurally established by crystallographic studies, these clusters are [La20Ni30(IDA)30(CO3)6(NO3)6(OH)30(H2O)12](CO3)(6).72H2O (1), [Ln20Ni21(C4H5NO4)21(OH)24(C2H2O3)6(C2O4)3(NO3)9(H2O)12](NO3)9.nH2O [C2H2O3 is the alkoxide form of glycolate; Ln = Pr (2), n = 42; Nd (3), n = 50], and {[La4Ni5Na(IDA)5(CO3)(NO3)4(OH)5(H2O)5][CO3].10H2O} infinity (4). Carbonate, oxalate, and glycolate are products of hydrothermal decomposition of IDA. Compositions of these compounds were confirmed by satisfactory elemental analyses. It has been found that the cluster structure is dependent on the identity of the lanthanide ion as well as the starting Ln/Ni/IDA ratio. The cationic cluster of 1 features a core of the Keplerate type with an outer icosidodecahedron of Ni(II) ions encaging a dodecahedral kernel of La(III). Clusters 2 and 3, distinctly different from 1, are isostructural, possessing a core of an outer shell of 21 Ni(II) ions encapsulating an inner shell of 20 Ln(III) ions. Complex 4 is a three-dimensional assembly of cluster building blocks connected by units of Na(NO3)/La(NO3)3; the structure of the building block resembles closely that of 1, with a hydrated La(III) ion internalized in the decanuclear cage being an extra feature. Magnetic studies indicated ferromagnetic interactions in 1, while overall antiferromagnetic interactions were revealed for 2 and 3. The polymeric, three-dimensional cluster network 4 displayed interesting ferrimagnetic interactions.     

Mg-Ni-Al-EDTA柱撑LDHs层状材料的水热合成、结构及性能

以Mg(NO3)2.6H2O、Ni(NO3)2.6H2O、Al(NO3)3.9H2O和[CH2N(CH2COOH)2]2为原料,采用水热合成法,合成了Mg-Ni-Al三元EDTA柱撑LDHs层状材料。采用ICP、元素分析仪、XRD、FTIR、TG-DSC、SEM等手段对样品进行了表征。探讨了pH值、反应温度、反应时间和原料配比对EDTA柱撑LDHs材料合成的影响。结果表明,在pH=8、反应温度控制在140℃、反应时间为24 h时,可以合成出结构规整、晶形良好、各层间排列紧密有序的含不同比例金属阳离子的EDTA柱撑LDHs材料。Mg-Ni-Al三元EDTA柱撑LDHs层状材料通过层间EDTA对Co2+的螯合作用,可以在较短时间内吸附溶液中的Co2+,去除率在97%以上。pH值、吸附时间、吸附温度、固体投加量及初始Co2+浓度对去除率均有不同程度的影响。     

NMR Crystallography Reveals Carbonate Induced Al-Ordering in ZnAl Layered Double Hydroxide

Layered double hydroxides (LDHs) serve a score of applications in catalysis, drug delivery, and environmental remediation. Smarter crystallography, combining X-ray diffraction and NMR spectroscopy revealed how interplay between carbonate and pH determines the LDH structure and Al ordering in ZnAl LDH. Carbonate intercalated ZnAl LDHs were synthesized at different pH (pH 8.5, pH 10.0, pH 12.5) with a Zn/Al ratio of 2, without subsequent hydrothermal treatment to avoid extensive recrystallisation. In ideal configuration, all Al cations should be part of the LDH and be coordinated with 6 Zn atoms, but NMR revealed two different Al local environments were present in all samples in a ratio dependent on synthesis pH. NMR-crystallography, integrating NMR spectroscopy and X-ray diffraction, succeeded to identify them as Al residing in the highly ordered crystalline phase, next to Al in disordered material. With increasing synthesis pH, crystallinity increased, and the side phase fraction decreased. Using ¹H−¹³C, ¹³C−²⁷Al HETCOR NMR in combination with ²⁷Al MQMAS, ²⁷Al-DQ-SQ measurements and Rietveld refinement on high-resolution PXRD data, the extreme anion exchange selectivity of these LDHs for CO₃²⁻ over HCO₃⁻ was linked to strict Al and CO₃²⁻ordering in the crystalline LDH. Even upon equilibration of the LDH in pure NaHCO₃ solutions, only CO₃²⁻ was adsorbed by the LDH. This reveals the structure directing role of bivalent cations such as CO₃²⁻ during crystallization of [M²⁺₄M³⁺₂(OH)₂]²⁺[A²⁻]₁⋅yH₂O LDH phases.     

Electrochemical synthesis of Zn-Al layered double hydroxide (LDH) films

A new electrodeposition condition to produce Zn-Al LDH films was developed using nitrate solutions containing Zn (2+) and Al (3+) ions. Deposition was achieved by reducing nitrate ions to generate hydroxide ions on the working electrode. This elevates the local pH on the working electrode, resulting in precipitation of Zn-Al LDH films. The effect of deposition potential, pH of the plating solution, and the Zn (2+) to Al (3+) ratio in the plating solution on the purity and crystallinity of the LDH films deposited was systematically studied using X-ray diffraction and energy dispersive spectroscopy (EDS). The optimum deposition potential to deposit pure and well-ordered Zn-Al LDH films was E = -1.65V versus a Ag/AgCl in 4 M KCl reference electrode at room temperature using a solution containing 12.5 mM Zn(NO 3) 2.6H 2O and 7.5 mM Al(NO 3) 3.9H 2O with pH adjusted to 3.8. The resulting film contained 39 atomic %Al (3+) ions replacing Zn (2+) ions, leading to a composition of Zn 0.61Al 0.39(OH) 2(NO 3) 0.39. xH 2O. Increasing or decreasing the aluminum concentration in the plating solution resulted in the formation of aluminum- or zinc-containing impurities, respectively, instead of varying aluminum content incorporated into the LDH phase. Choosing an optimum deposition potential was important to obtain LDH as a pure phase in the film. When the potential more negative than the optimum potential is used, zinc metal or zinc hydroxide was deposited as a side product, whereas making the potential less negative than the optimum potential resulted in the formation of zinc oxide as the major phase. The pH condition of the plating solution was also critical, as increasing pH destabilizes the formation of the LDH phase while decreasing pH promoted deposition of other impurities.     

Gravimetric determination of cadmium with N-phenylbenzohydroxamic acid

A quantitative gravimetric determination of cadmium in presence of Ag(+), Be(2+), Pb(2+), Mn(2+), Ni(2+), Cu(2+), Zn(2+), Hg(2+), Pd(2+), Ga(3+), Al(3+), Bi(3+), Sb(3+), La(3+), Ti(4+), Zr(4+), V(5+), Mo(6+) and U(6+) was made by selective precipitation with N-phenylbenzohydroxamic acid from a solution containing 6-15 mg of cadmium acetate at pH 5.8-6.5. The precipitate was weighed directly after drying at 110-120 degrees . The cadmium complex is curdy white, granular and melts at 225 degrees. The analytical results indicate the complex to be (C(13)H(10)NO(2))(2)Cd.     

Design of novel bilayer compounds of the CPO-8 type containing 1D channels

The reaction between Zn(NO3)2.6H2O and 5-aminoisophthalic acid (aip) in a mixture of diethylformamide (DEF) and ethanol resulted in [Zn(C8H5NO4)(C5H11NO)]n (CPO-8-DEF). This compound is composed of infinite 2D layers with tetrahedral Zn atoms and aip ligands in a triangular topology. The DEF molecules are bonded to Zn, and within each layer, the DEF molecules are oriented in the same direction, while in the subsequent layer, the DEF molecules are oriented in the opposite direction. By introduction of the pillaring ligands 4,4-bipyridine (BPY), 1,2-di-4-pyridylethylene (DPE), 1,2-di-4-pyridylethane (DPA), and 1,3-di-4-pyridylpropane (DPP) into mixtures of N,N'-dimethylformamide and water with Zn(NO3)2 and aip, we have successfully synthesized a series of related pillared bilayer compounds with the same common triangular Zn(aip) layer structural motif as that observed in CPO-8-DEF. The compounds are denoted as CPO-8-BPY ([Zn(C8H5NO4)(C10H8N2)(0.5)]n.3nH2O), CPO-8-DPE ([Zn(C8H5NO4)(C12H10N2)(0.5)]n.2.5nH2O), CPO-8-DPA ([Zn(C8H5NO4)(C12H12N2)(0.5)]n.2.5nH2O), and CPO-8-DPP ([Zn(C8H5NO4)(C13H14N2)(0.5)]n.3nH2O). In all cases, the pillars create spaces inside the bilayers that result in 1D channels running along the [010] directions with dimensions of 3.5 x 6.7 A(2). These channels contain water molecules that can be removed on heating to 150 degrees C, resulting in porous structures. The crystal structures of these porous high-temperature variants have been determined on the basis of powder X-ray diffraction data. All of the compounds show preferential adsorption of H2 over N2 at 77 K.     

Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8材料的制备及在三效催化剂中的应用

采用共沉淀法制备了Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8(0≤x≤0.4)材料, 并对所制备的材料进行了X射线衍射(XRD)和X射线光电子能谱(XPS)的表征, 测定了材料的比表面积(BET法)和储氧量(OSC), 同时采用氢气程序升温还原(H2-TPR)和氨气程序升温脱附(NH3-TPD)研究了材料的还原性能和表面酸性. 研究结果表明, Ce/Ti摩尔比大于1∶2的材料能形成立方萤石结构的固溶体, Ce/Ti摩尔比为1时, 材料表面Ce4+/Ce3+摩尔比达到最大; 随着Ce/Ti摩尔比的增大, 材料的储氧能力先增大后减小, 而TPR还原峰温则是先减小后增大, 当Ce/Ti摩尔比为1时, 材料的储氧量达到最大, 为660 μmol/g; 还原峰峰温最低, 为616 ℃. 以制备的材料为载体制备了一系列Pt/Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8三效催化剂, 并对催化剂进行了活性评价. 活性测试结果表明, 以Ce/Ti比为1的载体材料制成的催化剂对C3H8, CO和NO的起燃温度分别为236, 147和228 ℃, 表现出了优异的温度特性.     

La取代Ba对Ba1-xLaxMn3Al9O19-α催化剂结构及甲烷催化燃烧性能的影响

采用以尿素水解为基础的水热合成法制备了La和Mn取代的六铝酸盐催化剂(Ba1-xLaxMn3Al9O19-α).在Mn含量达到阈值时,研究了不同量的La取代Ba对Ba1-xLaxMn3Al9O19-α的相组成、结构、热稳定性及甲烷催化燃烧活性的影响.当x≥0.4时,水热合成过程中生成的La2(CO3)3在530-580℃分解,800-900℃时与-γAl2O3反应生成LaAlO3钙钛矿相,可抑制由BaCO3分解而生成的Ba2+的固相扩散,从而阻止了BaAl2O4尖晶石相的生成,使Ba2+在固相中保持较高的分散性,促进了六铝酸盐(-βAl2O3)相的形成.当x<0.4时,BaAl2O4尖晶石相的存在引起催化剂比表面积和催化燃烧活性的降低.La3+取代Ba2+后,六铝酸盐结构发生一定程度的扭变.这种扭变越大,所形成的六铝酸盐催化剂的热稳定性越差.Ba1-xLaxMn3Al9O19-α催化剂的甲烷催化燃烧活性随x的增大而增加,x=0.8时催化剂的活性最佳.     

Isolation and characterization of a polymeric lanthanum citrate

The first lanthanide citrate coordination polymer with the formula [La(Hcit)(H(2)O)](n) (Hcit(3-) = C(OH)(COO(-))(CH(2)COO(-))(2)) was prepared from La(2)O(3) and citric acid at pH = 2.2-2.5 under hydrothermal conditions at 120 degrees C. The compound was characterized by elemental analysis, IR, TG-DTA, and X-ray crystallography. It is thermally stable up to 158 degrees C and insoluble in common solvents. The compound crystallizes in the monoclinic space group C2/c with a = 16.765(3) A, b = 8.822(2) A, c = 14.048(3) A, beta = 120.64(3) degrees , and Z = 8. The structure consists of chains of La(III) cations bridged by O--C--O groups with pendant Hcit anions forming a pillar structure. The Hcit ligand is involved in six La--O bonds to five different La centers in a very compact 3D structure.     

Syntheses, structures, and photoluminescence of a novel class of d10 metal complexes constructed from pyridine-3,4-dicarboxylic acid with different coordination architectures

Two novel d(10) metal coordination polymers [Zn(PDB)](n)() (1) and [Cd(3)(PDB)(2)(OH)(2)(H(2)O)(2)](n)() (2) (H(2)PDB = pyridine-3,4-dicarboxylic acid) have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR, TG analysis, and single-crystal X-ray diffraction. Crystal data for 1: C(7)H(3)NO(4)Zn, orthorhombic Pna2(1), a = 8.423(17) A, b = 6.574(13) A, c = 12.899(3) A, Z = 4. Crystal data for 2: C(14)H(12)N(2)O(12)Cd(3), monoclinic C2/c, a= 20.130(4) A, b = 6.692(13) A, c = 13.081(3) A, beta = 102.78(3) degrees, Z = 4. Both compounds exhibit novel three-dimensional frameworks. Compound 1 not only possesses a one-dimensional rectangular channel but also contains infinite double-stranded helical chains. Compound 2 has two different types of channels, one being built up from pyridine rings and [CdO(5)N] and [CdO(6)] building units and the other being constructed from pyridine rings and [CdO(5)N] building units. Furthermore, both compounds show strong photoluminescence properties at room temperature.     

CRYSTAL STRUCTURE OF LANTHANUM (Ⅲ) COMPLEX WITH CRYPTAND [2,2,1]:H_2[2,2,1]·[La(NO)_3)_2·[2,2,1]]·La-(NO_3)_6·CH_3CN

<正> C34H69La2N13O34(Mr= 1418. 9) belongs to orthorhombic system, space group Pcab with a = 15. 513(3), b = 19. 463(5), c=38. 014(5)(?); Z = 8; V = 11477(4)(?)3; F(000) = 6000; μ=16.1cm-1(MoKa). The final R and Rw are 0. 045 and 0. 045, respectively. The molecule is Composed of one H2[2,2,1]2+, one [La(NO3)2[2,2, 1]]+, one La(NO3)63- and one solvent molecule CH3CN. The La3+ in [La-(NO3)2· [2,2,1]]+ is 11-coordinated by four oxygen atoms from two bidentate NO3- and seven heteroatoms from a [2,2,1] molecule; the La3+ ion in La (NO3)63- is coordinated to six bidentate NO3-. The La - O distances fall in the range of 2. 60-2. 70(?) and the La-N(cryp) mean distance is 2. 88(?).     

Preparation, Characterization, and Catalytical Application of MgCoAl-Hydrotalcite-Like Compounds

MgCoAl-hydrotalcite-like compounds(MgCoAl-HTLcs)were synthesized using the copre- cipitation method of variable pH values.The effect of each factor on the preparation of HTLcs was discussed systematically,which included pH values,mole ratios of Mg~(2 )to Co~(2 ),the concentrations of the solution,and the temperature and time of the hydrothermal treatment.Besides.the thermal de- composition of MgCoAl-HTLcs was discussed.X-ray diffraction,thermogravimetric analysis,and FT-IR spectroscopy were performed to characterize the MgCoAl-HTLcs samples.The results showed that when the pH=7.6-8.5 or 5.5-6.2,atomic ratios of(Mg~(2 ) Co~(2 ))/Al~(3 )=2 and Mg~(2 )/Co~(2 )ranging from 1.00 to 2.00,temperature and time of hydrothermal treatment being 110℃and 6 h,unique MgCoAl-HTLcs with high crystallinity could be obtained.When the calcination temperature was up to 250℃,the MgO phase was detected coexisting with Al_2O_3 and MgAl_2O_4 was highly spreaded on the derived mixed oxides. The synthesis reaction of benzoin methyl ether with methanol and benzaldehyde was chosen to study the catalytic activity of MgCoAl-HTLcs.The catalyst showed high activity and high stability in the synthesis of benzoin methyl ether in the feasible condition.     

Cooperativity between metal ions in the cleavage of phosphate diesters and RNA by dinuclear Zn(II) catalysts

A series of ligands containing linked 1,4,7-triazacyclononane macrocycles are studied for the preparation of dinuclear Zn(II) complexes including 1,3-bis(1,4,7-triazacyclonon-1-yl)-2-hydroxypropane (L2OH), 1,5-bis(1,4,7-triazacyclonon-1-yl)pentane (L3), 2,9-bis(1-methyl-1,4,7-triazacyclonon-1-yl)-1,10-phenanthroline (L4), and alpha,alpha'-bis(1,4,7-triazacyclonon-1-yl)-m-xylene (L5). The titration of these ligands with Zn(NO(3))(2) was monitored by (1)H NMR. Each ligand was found to bind two Zn(II) ions with a very high affinity at near neutral pH under conditions of millimolar ligand and 2 equiv of Zn(NO(3))(2). In contrast, a stable mononuclear complex was formed in solutions containing 5.0 mM L2OH and 1 equiv of Zn(NO(3))(2). (1)H and (13)C NMR spectral data are consistent with formation of a highly symmetric mononuclear complex Zn(L2OH) in which a Zn(II) ion is sandwiched between two triazacyclononane units. The second-order rate constant k(Zn) for the cleavage of 2-hydroxypropyl-4-nitrophenyl phosphate (HPNP) at pH 7.6 and 25 degrees C catalyzed by Zn(2)(L2O) is 120-fold larger than that for the reaction catalyzed by the closely related mononuclear complex Zn(L1) (L1 = 1,4,7-triazacyclononane). By comparison, the observation that the values of k(Zn) determined under similar reaction conditions for cleavage of HPNP catalyzed by the other Zn(II) dinuclear complexes are only 3-5-fold larger than values of k(Zn) for catalysis by Zn(L1) provides strong evidence that the two Zn(II) cations in Zn(2)(L2O) act cooperatively in the stabilization of the transition state for cleavage of HPNP. The extent of cleavage of an oligoribonucleotide by Zn(L1), Zn(2)(L5), and Zn(2)(L2O) at pH 7.5 and 37 degrees C after 24 h incubation is 4,10, and 90%. The rationale for the observed differences in catalytic activity of these dinuclear Zn(II) complexes is discussed in terms of the mechanism of RNA cleavage and the structure and speciation of these complexes in solution.     

含吡啶-2,5-二羧酸稀土-锌配位聚合物的合成结构和性能（英文）

Gd2O3,Zn(CH3COO)2·2H2O和吡啶-2,5-二羧酸(H2pydc)的水热反应导致一个新颖的钆-锌配位聚合物[La2Zn2(pydc)5(H2O)2]n(1).化合物1的晶体属单斜晶系,空间群P21/c,a=9-5869(1), b=20.4862(3), c=10.1105(2)A,β=97.4890(10)°,V=1968.76(5)A3,Z=4.在同样的条件下,Er2O3或Tb4O7,Zn(CH3COO)2·2H2O和H2pydc的水热反应产生了与化合物1结构不同的配位聚合物[Ln2Zn(pydc)4(H2O)8·H2O]n(Ln=Er(2); Ln=Tb(3)).化合物2和3异质同晶,空间群P1.对2:a=7.8708(7), b=9.2665(8), c=13.0232(11)A, α=75.295(1),β=75.000(2),γ=79.109(2)°,V=879.67(13)A3,Z=1; 对3:a=7.9105(5), b=9.3453(6), c=13.0005(9)A, α=75.3380(10),β=75.0460(10), γ=79.0050(10)°,V=890.17(10)A3,Z=1.X-射线单晶结构研究表明化合物1是一个三维网状结构,而化合物2和3为管状结构.热重分析研究表明所有化合物在380℃以下稳定.     

Synthesis and phosphate uptake behavior of Zr4+ incorporated MgAl-layered double hydroxides

We synthesized Zr(4+) incorporated MgAl-layered double hydroxides, Mg(AlZr)-LDH(A) (where A denotes a counteranion in the interlayer space and is expressed as CO(3) for carbonate and Cl for chloride ions), with different molar ratios of Mg/(Al+Zr). Then we characterized their uptake behavior toward phosphate ions. CO(3)-type tertiary LDH materials synthesized at room temperature show low crystallinity, whereas the highly crystalline Cl-type tertiary LDH, [Mg(0.68)Al(0.17)Zr(0.14)(OH)(2)][Cl(0.26)(CO(3))(0.04)1.24H(2)O], was synthesized for the first time using a hydrothermal treatment at 120 degrees C. The distribution coefficients (K(d)) of oxo-anions were measured with a mixed solution containing trace amounts of the anions. The selectivity sequences were Cl(-), NO(-)(3)相似文献   

Relative energies of alpha and beta isomers of Keggin dodecatungstogallate

The relative energies of beta Keggin heteropolytungstates, X(n+) W12O40(8-n)-, decrease as X(n+) is varied within period 3, from P5+ to Si4+ to Al3+. With heating of alpha-H5Ga3+ W12O40 at 200 degrees C in water, an equilibrated mixture of alpha (T(d); one 183W NMR signal) and beta (C(3v); three signals; 1:2:1 ratio) isomers is obtained. From deltaG(exp) = -RT ln K(beta-->alpha), in which (from 71Ga NMR spectra) K(beta-->alpha) (= [alpha]/[beta]) = 5.0, beta-GaW12O40(5-) is 0.65 kcal mol(-1) higher in energy than alpha-GaW12O40(5-). This finding is evaluated by analysis of the X-ray crystal structure alpha-K2Na3[GaW12O40] x 9.3 H2O [trigonal, space group P3(2)21, a = 18.9201(13) A, b = 18.9201(13) A, c = 12.5108(12) A, Z = 3, T = 100(2)K], comparison of the Shannon and Prewitt radii and Pauling electronegativities of Al3+ and Ga3+, and insight from density functional theory calculations, which predicted Ebeta - Ealpha = 0.32 kcal mol(-1).     

Studies on the Synthesis, Properties andPreparation Methods of Zeolite ZK-4

IntroductionIn 1961 Kerr et al. LI] first synthesized a new zeolite designated ZK-4 whose crystal structure is similar to that of zeolite A, but whose chemical composition differs significantly fromthat of zeolite A. Like zeolite A, ZK-4 contains 24 tetrahedra in a cubic unit cell. However,zeolite ZK--4 has a ratio of silicon to aluminium greater than 1. 0. This increases the siliconcontent of the new zeolite, resulting in smaller unit cell parameters than those of zeolite A.Because the …     

Hydroxyl-directed dinitration of carboxylate ligands mediated by lead and nickel nitrates and preparation of Pb/Ni heterometallic complexes under hydrothermal conditions

The hydrothermal reaction of 5-hydroxyisophthalic acid (H3L) and lead and nickel nitrates produced a heterometallic polymer [Pb6Ni(mu3-OH)8(La)2]n containing heptanuclear [Pb6Ni(mu3-OH)8]6+ units and a homometallic complex {[Pb(Lb)(H2O)].(H2O)0.25}n consisting of one-dimensional lead-oxide chains: evidently, the La and Lb ligands resulted from in situ hydroxyl-directed dinitration of L ligand during the hydrothermal reaction.     

A double-functionalized cyclen with carbamoyl and dansyl groups (cyclen = 1,4,7,10-tetraazacyclododecane): a selective fluorescent probe for Y(3+) and La(3+).

A cyclen (=1,4,7,10-tetraazacyclododecane) doubly functionalized with three carbamoylmethyl groups and one dansylaminoethyl (dansyl = 2-(5-(dimethylamino)-1-naphthalenesulfonyl) group (L(2) = 1-(2-(5-(dimethylamino)-1-naphthalenesulfonylamido)ethyl)-4,7,10-tris(carbamoylmethyl)-cyclen) was synthesized and characterized. Potentiometrtic pH titration and UV spectrophotometric titration of L(2) served to determine deprotonation of the pendant dansylamide (L(2) --> H(-1)L(2)) with a pK(a) value of 10.6, while the fluorometric titration disclosed a pK(a) value of 8.8 +/- 0.2, which was assigned to the dansyl deprotonation in the excited state. The 1:1 M(3+)-H(-1)L(2) complexation constants (log K(app) = 6.0 for Y(3+) and 5.2 for La(3+), where K(app)(M-H(-1)L(2)) = [M(3+)-H(-1)L(2)]/[M(3+)](free)[L(2)](free) (M(-1)) at pH 7.4) were determined by potentiometric pH titration and UV and fluorescence spectrophotometric titrations (excitation at 335 nm and emission at 520 nm) in aqueous solution (with I = 0.1 (NaNO(3))) and 25 degrees C. The X-ray structure analysis of the Y(3+)-H(-1)L complex showed nine-coordinated Y(3+) with four nitrogens of cyclen, three carbamoyl oxygens, and the deprotonated nitrogen and a sulfonyl oxygen of the dansylamide. The crystal data are as follow: formula C(28)H(49)N(11)O(13.5)SY (Y(3+)-H(-1)L(2) x 2(NO(3)(-)) x 2.5H(2)O), M(r) = 876.73, monoclinic, space group P2(1)/n (No. 14), a = 18.912(3) A, b = 17.042(3) A, c = 24.318(4) A, beta = 95.99(1) degrees, V = 7794(2) A(3), Z = 8, R1 = 0.099. Upon M(3+)-H(-1)L(2) complexation, the dansyl fluorescence greatly increased (8.6 and 3.8 times for Y(3+) and La(3+), respectively) in aqueous solution at pH 7.4. Other lanthanide ions also yielded Ln(3+)-H(-1)L(2) complexes with similar K(app) values, although all the dansyl fluorescences were weakly quenched. On the other hand, zinc(II) formed only a 1:1 Zn(2+)-L(2) complex at neutral pH with negligible fluorescence change. The X-ray crystal structure of the Zn(2+)-L(2) complex confirmed the pendant dansylamide being noncoordinating. The crystal data are as follow: formula C(28)H(51)N(11)O(14)SZn (Zn(2+)-L(2) x 2(NO(3)(-)) x 3H(2)O), M(r) = 863.22, monoclinic, space group C2/n (No. 15), a = 35.361(1) A, b = 13.7298(5) A, c = 18.5998(6) A, beta = 119.073(2) degrees, V = 7892.3(5) A(3), Z = 8, R1 = 0.084. Other divalent metal ions did not interact with L(2) at all (e.g., Mg(2+) and Ca(2+)) or interacted with L(2) with the dansyl fluorescence quenched (e.g., Cu(2+)).