一氧化碳偶联制草酸二乙酯用Pd-Fe/α-Al2O3催化剂的表面结构

 应用XPS,XRD,TEM和TPR等表征技术研究了CO常压气相偶联合成草酸酯反应体系中Pd-Fe/α-Al2O3催化剂的表面结构. 结果表明,催化剂表面的活性组分钯以高度分散的Pd0形式存在,分散的钯微晶平均粒径约为8 nm; 助剂铁以Fe2+形式存在,其分散度极高. 根据表征实验结果,讨论了活性组分、助剂和载体三者之间的相互作用. 助剂可以优先高度分散在载体表面,而活性组分会自动落位在助剂层上达到均匀分散,即催化剂表面形成了类似于金属-金属氧化物-载体相间的结构.     

Effect of La2O3／γ—Al2O3 Catalyst on the Activation of CH4 and CO2 to C2 Hydrocarbons under Non—equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocabons under non-equilibrium plasma, methane conversion was decreased,but selectivity of C2 hydroxarbons was increased when using La2O3/γ-Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/γ-Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd-La2O3/γ-Al2O3 was used as catalyst,the major C2 product was ethylene.     

Effect of Al2O3 Binder on the Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

A series of iron-based Fischer-Tropsch synthesis (FTS) catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduc-tion/desorption (TPR/TPD) and Mossbauer effect spectroscopy (MES) methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 (weight basis). After the point, it decreases with further increase in Al2O3 content. The incorporation of AI2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor (CSTR) under the reaction conditions of 260℃, 1.5 MPa, 1000 h-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction (WGS) activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.     

Effect of Reaction Temperature and Pressure on the Metathesis Reaction between Ethene and 2-Butene to Propene on the WO3/Al2O3-HY Catalyst

Effect of reaction temperature and pressure on the metathesis reaction between ethene and 2-butene to propene was studied on the WO3/γ-Al2O3-HY catalyst. The activity is found to increase with elevated temperature and reaches a plateau at 150-240℃. After that, the activity undergoes a remarkable decrement at too high temperature. The effect of temperature is elucidated by the oxidation state of tungsten species. The evaluation results also indicate that the stability is dependent on this reaction parameter. Medium pressure (0.5-0.8 MPa) is favorable for stability, while atmospheric pressure or too high pressure (>1.0 MPa) deteriorates the stability. For explanation, UV Vis, FT-IR, O2-TPO, and TG techniques are used to characterize the spent catalysts.     

High Activity SnO2／Al2O3 Catalyst for NO Reduction in the Presence of Oxygen

The novel sol-gel SnO2/Al2O3 catalysts for selective catalytic reduction NO by propene under lean burn condition were investigated. The results showed thatthe maximum NO conversion was 82% on the SnO2/Al2O3 (5%Sn) catalyst, and the presence of H20 and SO2 improved the catalytic activity at low temperature. The catalytic activity of NO2 reduction by propene is much higher than that of NO at the entire temperature range, and the maximum NO2 conversion reached nearly 100% around the temperature 425℃.     

Catalytic Combustion of Methane over MnOx／ZrO2-Al2O3 Catalysts

MnOx/Al2O3 and MnOx/ZrO2-Al2O3 catalysts were prepared by incipient wetness impregnation of Mn(CH3COO)2 on the corresponding supports, followed by the characterization using X-ray diffraction (XRD). temperature programmed reduction (TPR) and BET surface area techniques. The result shows the BET surface area of ZrO2-Al2O3 is lower than that of Al2O3 due to the loading of ZrO2.However tile resulted MnOx/ZrO2-Al2O3 catalyst exhibits higher activity for methane combustion than MnOx/Al2O3, because the addition of ZrO2 onto Al2O3 is beneficial for the dispersion of Mn species and the improvement of the lattice oxygen activity in MnOx. subsequently the activation of methane during combustion. The optimum loading of Zr in MnOx/ZrO2-Al2O3 is in the range of 5%-10% correlated with the calcination temperatures of catalyst supports.     

CO偶联反应中氧对Pd－Fe／α－Al2O3催化剂活性的影响

 在CO常压气相催化偶联合成草酸酯反应体系中，考察了原料气CO中不同氧杂质含量和不同反应温度对钯系催化剂活性的影响．结果表明，随着氧含量的增加和反应温度的升高，CO的转化率和草酸二乙酯（DEO）的空时收率升高，但DEO的选择性下降，且有副产物乙酸乙酯生成 ；氧杂质的存在同时加快了CO偶联主副反应速率．根据实验现象及XPS表征结果探讨了催化剂活性变化规律的机理，并考察了在反应温度下无CO偶联反应时氧对钯系催化剂中活性组分钯及助剂铁的氧化作用．实验结果表明，氧引起的钯系催化剂活性的改变具有可逆性．     

Study of The Pd-B/ γ-Al2O3 Amorphous Alloy Catalyst

The Pd-B/γ-Al2O3 amorphous alloy catalyst and Pd/γ-Al2O3 crystalline metal catalyst were prepared by KBH4 reduction and routine impregnation,respectively.Pd-B/γ-Al2O3 and Pd/γ-Al2O3 catalysts were characterized by XRD and SEM.It was found that the catalytic activity of the Pd-B/γ-Al2O3 amorphous alloy catalyst was higher than that of the Pd/γ-Al2O3 crystalline metal catalyst in the anthraquinone hydrogenation.     

Reaction Chemistry of W—Mn／SiO2 Catalyst for the Oxidative Coupling of Methane

Reaction chemistry of the OCM reaction on W-Mn/SiO2 catalyst has been reviewed in this account.Initial activity and selectivity,stability in a long-term reaction,reaction at elevated pressures and a modelling test in a stainless-steel fluidized-bed reactor show that W-Mn/SiO2 has promising performance for the development of an OCM process that directly produces ethylene from natural gas.A study on surface catalytic reaction kinetics and used cataly st structure characterization revealed a possible reason why C2 and COx selectivity changed during the long-term reaction.Further improvement of the catalyst composition and preparation metbod should be a future direction of study on OCM reaction over W-Mn/SiO2 catalyst.     

Al2O3 Effect on the Catalytic Activity of Cu-ZnO-Al2O3-SiO2 Catalysts for Dimethyl Ether Synthesis from CO2 Hydrogenation

The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed by XRD and H2-TPR, the added alumina produces high dispersion of CuO and makes the reduction of CuO difficult. XPS analysis detects a remarkably high Al^3＋ enrichment at the surface of calcined samples, along with a decrease of Eb of Cu 2p3/2, which confirms the Cu-Al interaction. Another important role of Al203 would be to incorporate into the SiO2 structure to form the acid-base sites for ether formation. The reaction results shows that the addition of Al2O3 exhibits a promoting effect on the CO2 conversion only when its content is below 1.4%, and an optimal DME selectivity is obtained when 4.0%Al2O3 is added, indicating a better ＇synergistic effect＇ is present between the methanol forming component and the acidic component in bifunctional catalysts. Possible relationship between the catalytic activity and the Cu-Al interaction as well as the surface acidity is discussed.     

CO偶联临氢反应Pd-Fe/Al2O3催化剂的XPS研究

 利用XPS及氩离子溅射等技术对CO偶联和临氢反应中所用催化剂\r\n表面活性组分和助剂的含量及其化学状态进行了分析，并通过测定氢在\r\n催化剂表面的化学吸附，以及氢浓度对催化剂活性的影响，探讨了CO偶\r\n联反应中催化剂临氢失活的主要原因．XPS表征结果表明，CO偶联反应\r\n中催化剂活性组分以Pd0和Pd2＋形式共存；而临氢反应后仅以Pd0形式\r\n存在，助剂FeO从催化剂的内部向表面迁移且有少量Fe2＋转变为Fe3＋\r\n．催化剂临氢失活的主要原因是H2在活性组分Pd及助剂Fe（主要是FeO\r\n）表面均可形成解离吸附，形成的金属氢化物可在低活化能条件下发生\r\n迁移．这种迁移有利于副产物乙醇的生成，从而削弱了CO偶联主反应，\r\n催化剂表面活性组分Pd的相对含量减少，并几乎处于钝化状态，导致临\r\n氢反应中CO转化率、草酸二乙酯选择性及空时收率均下降．停止通入H\r\n2后，催化剂的活性可恢复至正常状态．     

钯系催化剂的氨中毒研究

 考察了CO常压气相偶联合成草酸酯反应体系中在不同氨含量下P\r\nd系催化剂活性随反应时间的变化．结果表明，随着氨含量的增加，催\r\n化剂活性降低的速率加快，氨含量不超过0．54％时，仅引起催化剂活\r\n性下降，但不会造成催化剂完全失活；当氨含量达1．16％时，催化剂\r\n活性随反应时间迅速下降，直至完全失活．同时，观测了催化剂氨中毒\r\n的不可逆性．利用XPS和TEM表征手段探讨了Pd系催化剂氨中毒机理，并\r\n分析了在工业生产条件下催化剂氨中毒不可逆性的原因．     

Effect of Hydrogen on Catalytic Coupling Reaction of Carbon Monoxide to Diethyl Oxalate

The kinetics of hydrolysis of tetrahydrozoline hydrochloride in aqueous solution at 353, 363 and 368 K in the pH-range from 2.00 to 12.20 has been investigated. The decomposition products have been investigated by HPLC. This revised version was published online in June 2006 with corrections to the Cover Date.     

Deactivation kinetics of a COcoupling reaction after addition of H2 to the system

The influence of hydrogen on the catalytic coupling reaction of CO was tested ar reaction temperatures of 105 120^oC and a residence time of 1.8 s. The formation rate of diethyl oxalate (DEO) decreases with the addition of hydrogen to the system. Increasing hydrogen concentration and reaction temperature, the apparent rate of main reaction or the yield of DEO decreases more quickly. But the deactivation rate does not change with the relative activity. By correlating the experimental data, the deactivation kinetics was obtained. This revised version was published online in June 2006 with corrections to the Cover Date.     

CO低温氧化Au/Al2O3催化剂的失活及稳定性

 采用改进的等体积浸渍法制备了1.5%Au/Al2O3催化剂,考察了催化剂在CO低温氧化反应中的催化活性,比较了其在干燥的原料气和水汽饱和的原料气中的稳定性,考察了经水汽饱和或加热的空气处理后催化剂活性的变化,探讨了催化剂失活的原因. 结果表明, Au/Al2O3在水汽饱和的原料气中比在干燥的原料气中具有更好的稳定性,经水汽饱和或加热的空气处理后其活性均会下降. Au/Al2O3的失活主要包括CO氧化失活、热处理失活和水汽处理失活,前两种失活主要是因为催化剂中类似碳酸盐物种的生成和活性位上-OH 的脱除,是可逆失活; 而最后一种失活是不可逆的,主要归因于金颗粒的长大.     

α-Al2O3的性质对负载钯催化剂催化CO偶联反应的影响

 以不同来源的 α-Al2O3 为载体制备了用于催化CO偶联制草酸二甲酯反应的Pd/α-Al2O3 催化剂,利用X射线衍射、 N2吸附和X射线能谱等手段对载体进行了表征. 结果表明,催化剂活性与载体的比表面积没有必然联系,但依赖于载体孔容及孔径的分布范围. 同时 α-Al2O3 的纯度和杂质种类对催化剂活性也有影响,少量钠氧化物和 γ-Al2O3 的存在会大大降低催化剂的活性. 此外,利用CO化学吸附法分析了催化剂活性组分的分布情况. 结果表明,催化剂表面活性金属Pd的分散度达到3.94%以上时,分散度的进一步增大对CO偶联反应没有明显影响.     

Effect of oxygen on the activity of a Pd-Fe/a-Al2O3catalyst for CO coupling to diethyl oxalate

The effect of oxygen on the activity and selectivity of a Pd-Fe/a-Al₂O₃ catalyst for CO coupling to diethyl oxalate (DEO) was studied in the range of 105 - 120^oC. The results showed that the conversion of CO and the STY (Space Time Yield) of DEO increased with increasing oxygen concentration from 5 to 10 mol% and reaction temperature, but the selectivity to DEO decreased. The role of oxygen in CO coupling is discussed on the basis of the experimental results in the present work and the XPS characterization of the catalysts. It was also found that the activity and selectivity of the catalyst could be fully recovered after removing O₂ from the reaction system.     

低温CO氧化中担载C0304催化剂失活的影响因素

This study focused on the influences of a variety of reaction parameters and guest molecules such as H2O and C3H8 on the deactivation of supported Co3O4 catalysts for CO oxidation.Additionally,the physical features of and carbon deposition on some samples after the reaction under the chosen conditions were determined by BET and X-ray diffraction as well as by carbon analyses to deduce the precursors associated with catalyst deactivation.Activity maintenance profiles of the catalysts for CO oxidation at 100°...     

用于CO选择氧化反应的新型Pt-Fe/Al2O3催化剂

 基于前体的概念,采用调变多元醇法制备了Pt-Fe/Al2O3催化剂,并考察了其催化CO选择氧化的性能. TEM结果表明,该方法可有效控制催化剂的金属粒子粒径为2.5～3 nm; 催化剂性能测试结果表明,在80 ℃和n(CO)/n(O2)=2的条件下,Pt-3Fe/Al2O3显示出良好的催化性能和稳定性,CO转化率达99%,CO2选择性达98%,这可能是由于Pt和Fe之间的有效相互作用所致.