Nafion/活性炭涂层固相微萃取探头的制备与应用研究

采用Nafion和活性炭粉末作为固相涂层在不锈钢丝上交替涂制了固相微萃取探头(SPME),研究了它的特性,并与商品类似探头和单纯的Nafion探头作了比较。该探头可比商品探头(SPME)的富集率高1个数量级。由于Nafion有很强的极性,因此它对极性化合物有很强的萃取能力,适合萃取醇等物质。用该探头测定了醇类、酯类物质,检出限低于10ng/mL,相对标准偏差RSD<6 3%。     

用溶胶-凝胶法制备PEG-20M固相微萃取探头

采用溶胶－凝胶方法制备了PEG－20M涂层的固相微萃取（SPME）探头并研究了它的特性。该探头具有耐温高,抗溶剂冲洗,使用寿命长的特点。由于PEG－20M的极性比较强,因此它对极性化合物如酚等有很好的萃取能力。用该探头测定了酚类物质,检出限达0．78－4．2ng/mL,线性范围为0．1－10μg/mL,相对标准偏差RSD＜6％。     

三苄基杯[6]芳烃固相微萃取复合涂层的研制及其应用

采用溶胶-凝胶方法制备了三苄基杯[6]芳烃/羟基硅油(C[6]/OH-TSO)固相微萃取(SPME)探头, 通过对多环芳烃和酞酸酯(PAEs)的分析考察了新型C[6]/OH-TSO探头的性能. 结果表明: 杯[6]芳烃SPME探头对这些非极性和弱极性的芳香化合物有很好的萃取效果和选择性, 具有耐高温、使用寿命长等特点. 建立了SPME与气相色谱-氢火焰(GC-FID)联用测定化妆品中PAEs的方法. 该方法检测限低, 重现性好(RSD＜9%), 线性范围宽(2～3个数量级). 回收率在83.42%～98.85%之间.     

胺桥杯［4］芳烃固相微萃取探头的特性及其应用

采用溶胶-凝胶方法制备了25,27-二羟基-26,28-(1′,10′-二氧代-4′,7′-二氮杂-3′,8′-二氧代亚辛基)-对-特丁基-杯［4］芳烃/羟基硅油(胺桥杯［4］/OH-TSO)固相微萃取(SPME)探头,通过对脂肪胺和芳胺的分析研究了它的特性。该探头具有耐高温、抗溶剂冲洗、使用寿命长、重现性好等特点。杯环上极性胺桥的引入增强了涂层的极性,因而在不需衍生的情况下对脂肪胺和芳胺都具有很好的萃取能力,表现出对胺类化合物的特殊选择性。脂肪胺的检出限为0.19～39.51 μg/L,线性范围达3个数     

聚苯乙烯-丙烯酸乙酯新型固相微萃取吸附质的研究与应用

固相微萃取(SPME)是90年代兴起的新型无溶剂样品前处理技术,基本的固相微萃取是通过石英纤维头表面涂渍的高分子层对样品中的有机分子进行萃取和预富集,然后进行色谱分析,使预处理过程大为简化,提高了分析速度及灵敏度。目前,商品SPME．GC联用装置是由美国Supclco公司生产的涂有PDMS、PA、PEG20M3种单一吸附质及4种部分交联的复合固相材料。涂层极性决定了其应用范围。     

采用溶胶-凝胶技术涂层的新型固相微萃取方法及其应用

将溶胶-凝胶技术应用于SPME固相涂层的制备,涂制的端羟基-聚二甲基硅氧烷固相涂层热稳定性好,萃取时间和解吸时间短,对极性化合物及非极性化合物均有较强的萃取富集能力。扫描电镜图显示涂层表面为多孔结构。采用该涂层的SPME方法在对环境样品的分析中获得了令人满意的效果。     

用于固相微萃取的乙烯基开链冠醚复合涂层的研制

固相微萃取 (SPME)是一种新型的样品预处理技术 [1] ,其核心是 SPME装置中萃取头上的固相涂层 .目前商用 SPME涂层的种类较少 ,热稳定性较差 (推荐使用温度 2 0 0～ 2 80℃ ) ,使用寿命较短(40～ 1 0 0次 ) ,价格偏高 ,限制了其推广应用 .因此发展高选择性、高稳定性和高效的固     

顶空固相微萃取-气相色谱法测定油脂中浸出油溶剂残留的方法研究

采用新型溶胶 凝胶富勒烯涂层的固相微萃取(SPME)探头,建立了顶空固相微萃取 气相色谱法(HS SPME GC)测定食用植物油中溶剂残留主要成分正己烷的方法,并对萃取条件进行了优化,方法的检出限为1.47μg kg(S N=5),RSD=1.9%(n=7),加标回收率为88.4%～102.1%。     

烟用浸膏香味成分分析对比研究

应用同时蒸馏萃取(SDE)、液-液连续草取(LLE)、固相微萃取(SPME)三种方法分析了烟草浸膏香味成分,并对分析结果进行了对比研究。结果表明：SDE和LLE适于较精确的分析,但对某些成分缺乏足够灵敏度;SPME可弥补SDE和LLE的不足之处,但重现性较差,不适于严格的分析研究：同时,由于不同极性SPME纤维萃取头对样品有不同适应性,故需要认真地对其进行最适的选择。     

固相微萃取-衍生化技术及其在环境和生物分析中的应用

固相微萃取(SPME)是近年发展起来的一种无溶剂、简单快速的样品预处理方法。SPME同衍生化技术结合是拓展SPME方法的一个重要方向。对固相微革取与衍生化方法结合在环境及生物样品中极性分析和金屑有机化合物上的应用及进展进行了评述，又对SPME衍生化反应的方式和条件进行了讨论。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.