Fluorescent perylene diimide rotaxanes: spectroscopic signatures of wheel-chromophore interactions

[2]- and [3]-rotaxanes with a tetraphenoxy perylene diimide core were synthesized. Hydrogen bonding between the wheel and the imide changes the optical properties of the perylene chromophore: the absorption and fluorescence spectra are red-shifted. The decay times of the rotaxanes are shorter in comparison with that of the axle. Single molecule fluorescence measurements reveal relatively narrow distributions of emission maxima and decay times. The averages are in agreement with ensemble measurements. The observed red shifts make the perylene diimide a suitable chromophore for sensing the position of the wheel on the axle.     

Chiral [1]Rotaxanes: X‐Ray Structures and Chiroptical Properties

New chiral [1]rotaxanes with aromatic bridges were prepared in yields up to 72% starting from a [2]rotaxane with sulfonamide groups in wheel and axle. The X‐ray structures of the parent [2]rotaxane 1 and of the three [1]rotaxanes 3e , g , h were solved which show networks of H‐bonds between wheel and axle. The separation of the racemic mixtures of four of the [1]rotaxanes, i.e., of 3a , b , d , e , was possible with HPLC on Chiralcel OD. The aromatic chromophores in the bridges lead to a considerable enhancement of the intensities of the molar CD as compared to the analogues with aliphatic bridges. In one case ( 3d ), the Cotton effects are as strong as those usually found in helicenes.     

Rotaxanes with a calix[6]arene wheel and axles of different length. Synthesis, characterization, and photophysical and electrochemical properties

We have synthesized a series of three rotaxanes constituted of a calix[6]arene wheel and a 4,4′-bipyridinium unit on the axle, which differ in the length of the two aliphatic chains that connect the central bipyridinium unit with the two terminal stoppers. We have investigated the photophysical and electrochemical properties of these systems and of suitable model compounds in two prototypical solvents, namely, acetonitrile and methylene chloride. Our results show that these rotaxanes are characterized by a complex pattern of intercomponent interactions whose strength can be influenced by the length of the axle as well as the nature of the solvent.     

2]Rotaxanes containing pyridinium-phosphonium axles and 24-crown-8 ether wheels

A triethylphosphonium group attached to a pyridinium ethane moiety can be used as an axle for the self-assembly of [2]pseudorotaxanes and [2]rotaxanes. Although [2]pseudorotaxane formation is limited due to the bulk of the PR4+ group, [2]rotaxanes can be formed utilising 24-crown-8 ether, benzo-24-crown-8 ether and naphtho-24-crown-8 ether. The synthesis of these [2]rotaxanes and the X-ray structure of the [2]rotaxane containing a 24-crown-8 ether wheel are described. When the crown ether contains an aromatic group two possible conformational isomers exist; these are identified at low temperature by 1H and 31P NMR spectroscopy.     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

Solvent‐ and Light‐Controlled Unidirectional Transit of a Nonsymmetric Molecular Axle Through a Nonsymmetric Molecular Wheel

The development of a pseudorotaxane motif capable of performing unidirectional threading and dethreading processes under control of external stimuli is particularly important for the construction of processive linear motors based on rotaxanes and, at least in principle, it discloses the possibility to access to rotary motors based on catenanes. Here, we report a strategy to obtain the solvent‐controlled unidirectional transit of a molecular axle through a molecular wheel. It is based on the use of appropriately designed molecular components, the essential feature of which is their non‐symmetric structure. Specifically they are an axle containing a central electron‐acceptor 4,4′‐bipyridinium core functionalized with a hexanol chain at one side, and a stilbene unit connected through a C6 chain at the other side, and a heteroditopic tris(phenylureido)‐calix[6]arene wheel. In apolar solvents the axle threads into the wheel from its upper rim and with the end carrying the OH group, giving an oriented pseudorotaxane structure. After a stoppering reaction, which replaces the small hydroxy group with a bulky diphenylacetyl moiety, and replacement of the apolar solvent with a polar one, dethreading occurs through the slippage of the stilbene unit from the lower rim of the wheel, that is, in the same direction of the threading process. The essential role played by the stilbene unit to achieve the unidirectional transit of the axle through the wheel, and to tune the dethreading rate by light is also demonstrated.     

A self-threaded "molecular 8"

A new type of [1]rotaxanes containing two aliphatic bridges between axle and wheel is obtained in 39% yield in a one-step synthesis starting from a [2]rotaxane which contained one sulfonamide group each in both the wheel and the axle. Temperature controlled chemoselective substitution reactions first at these sulfonamide nitrogens and then subsequently at the various other carboxamide nitrogens in the wheel and axle give rise to the formation of an isomeric mixture of three double-bridged [1]rotaxanes which could be separated by HPLC. Structure determination of the main product 3a was possible by NMR experiments supported by molecular modeling calculations. Using different reaction conditions, a double-substituted but not yet bridged [2]rotaxane 4 could be isolated as an intermediate giving further evidence for the assigned structure of 3a and the way of its formation. The shape of this double-bridged [1]rotaxane 3a reminds of a self-intertwining chiral "molecular 8", in which any possible racemization due to deslipping is hindered by the two stoppers originating from the former rotaxane axle. Hence, to the best of our knowledge this is the first example of a molecule in which both concepts, cycloenantiomerism and helical chirality, are realised in one structure. Enantiomer separation of the main product was possible by further HPLC using chiral stationary phases. The Cotton effects of the circular dichrograms are different to those of the already synthesized [1]rotaxanes bearing just one aliphatic bridge between axle and wheel.     

Sensing the glass transition in thin and ultrathin polymer films via fluorescence probes and labels

Fluorescence was used to characterize the glass transition in thin and ultrathin supported polymer films with common chromophores. The temperature dependence of the fluorescence intensity exhibits a transition or break upon cooling from the rubbery state to the glassy state, and this is identified as the glass transition. A variety of chromophores are investigated including pyrene, anthracene, and phenanthrene either as dopants, covalently attached to the polymer as a label, or both. The particular choice of the chromophore as well as the nature of the attachment, in the case of labels, have significant impact on the success of this method. Problematic cases include those in which the excited‐state chromophore undergoes significant photochemistry in addition to fluorescence or those in which the particular attachment of the chromophore as a label may allow for conformational interactions that affect the fluorescence quantum yield in a nontrivial way. Polymers that have an intrinsic fluorescence unit, for example, polystyrene, may allow for the fluorescence sensing of the glass transition without added dopants or labels. Finally, it is demonstrated that this technique holds promise for the study of the glass transition in polymer blends and within specific locations in multilayer films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2745–2758, 2002     

1]rotaxanes and pretzelanes: synthesis, chirality, and absolute configuration [In Process Citation

The synthesis of aliphatically bridged [1](n)rotaxanes and (n)pretzelanes in preparative yields and the dependency of their chiroptical properties on the length (n) of their bridge are reported. A cycloenantiomeric bis(sulphonamide)[2]rotaxane with a sulphonamide group in its axle and its wheel was intramolecularly dialkylated by homologous bifunctional oligomethylene reagents to form chiral [1](n)rotaxanes bearing bridges of different lengths (n) between the axle and the wheel. Intramolecular dialkylation by 1,omega-dibromoalkanes of a topologically chiral bis(sulphonamide)[2]catenane with a sulphonamide group in both of the macrolactam rings leads to pretzel shaped molecules ((n)pretzelanes) with homologous bridges between the two macrocycles. Their yields decrease with decreasing length of the bridge. The shortest bridge isolated so far in reasonable amounts consists of six methylene groups ((6)pretzelane). Remarkably, a covalent connection of axle and wheel in a [2]rotaxane was successful even with much shorter bridges-down to only three methylene groups ([1](3)rotaxane). The structural changes of the [1](n)rotaxanes with decreasing bridge length is expressed by an increasing high-field shift in the 1H NMR spectra. Enantiomeric resolution of the racemates of both series was achieved in seven cases for the [1](n)rotaxanes and two for the (n)pretzelanes by use of chiral HPLC columns. The circular dichrograms of both compound families show a strong dependency on the length of the bridge. However, the shortest bridges displayed some additional unexpected deviations. A new specification of the absolute configuration of supramolecules, such as [n]catenanes, [n]rotaxanes and (n)pretzelanes is introduced together with some nomenclature additions.     

Synthesis of [60]fullerene-functionalized rotaxanes

Synthesis of [60]fullerene (C₆₀)-functionalized rotaxanes via Diels-Alder reactions with C₆₀ is described. Diels-Alder reaction of C₆₀ and sulfolene moiety as masked diene attached on the wheels of rotaxanes results in high yields of C₆₀ incorporation. Rotaxanes are prepared by tin-catalyzed urethane-forming end-capping reaction with isocyanate of pseudorotaxane having the wheel carrying C₆₀ functionality as introduced by the Diels-Alder reaction. The Diels-Alder reaction was accomplished as end-capping reaction between C₆₀ and pseudorotaxane bearing sultine moiety as masked diene on the axle terminal. A variety of C₆₀-containing [2]rotaxanes was prepared in moderate to good yields by these Diels-Alder protocols.     

Asymmetric benzoin condensation catalyzed by chiral rotaxanes tethering a thiazolium salt moiety via the cooperation of the component: can rotaxane be an effective reaction field?

Although some reactions on rotaxanes have been reported, the characteristic features of the rotaxanes providing unique reaction fields have hardly been studied, especially as catalyst. In our continuous studies on interlocked molecules such as rotaxanes and catenanes, we have noticed the importance of such interlocked structures with high freedom in functionalized materials such as molecular catalyst. For catalytic asymmetric benzoin condensations, two optically active rotaxanes possessing thiazolium salt moieties were prepared using the binaphthyl group as the chiral auxiliary. The benzoin condensations of aromatic aldehydes catalyzed by the chiral rotaxanes as catalysts gave optically active benzoins with ca. 30% ee in moderate to high chemical yields depending upon the structure of rotaxane and the reaction conditions employed. From the results, two intrarotaxane chirality transfers are confirmed: (i) through-space chirality transfer from wheel to axle and (ii) through-bond chirality transfer controlled with an achiral wheel. Because these asymmetric reaction fields are specific to the rotaxane structure, the importance and possibility of the "rotaxane field" as a particular reaction field is demonstrated in this work.     

Self-assembly of supramolecular light-harvesting arrays from covalent multi-chromophore perylene-3,4:9,10-bis(dicarboximide) building blocks

We report on two multi-chromophore building blocks that self-assemble in solution and on surfaces into supramolecular light-harvesting arrays. Each building block is based on perylene-3,4:9,10-bis(dicarboximide) (PDI) chromophores. In one building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 3 and 6 carbons of pyromellitimide to form a cross-shaped molecule (PI-PDI(4)). In the second building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 1 and 7 carbons of a fifth PDI to produce a saddle-shaped molecule (PDI(5)). These molecules self-assemble into partially ordered dimeric structures (PI-PDI(4))(2) and (PDI(5))(2) in toluene and 2-methyltetrahydrofuran solutions with the PDI molecules approximately parallel to one another primarily due to pi-pi interactions between adjacent PDI chromophores. On hydrophobic surfaces, PDI(5) grows into rod-shaped nanostructures of average length 130 nm as revealed by atomic force microscopy. Photoexcitation of these supramolecular dimers in solution gives direct evidence of strong pi-pi interactions between the excited PDI chromophore and other PDI molecules nearby based on the observed formation of an excimer-like state in <130 fs with a lifetime of about 20 ns. Multiple photoexcitations of the supramolecular dimers lead to fast singlet-singlet annihilation of the excimer-like state, which occurs with exciton hopping times of about 5 ps, which are comparable to those observed in photosynthetic light-harvesting proteins from green plants.     

CH···O hydrogen bonds in "clicked" diketopiperazine-based amide rotaxanes

Two amide [2]rotaxanes were synthesized in high yields using a novel N,N'-dipropargyl diketopiperazine axle centerpiece as the template to which the stoppers are attached through "click chemistry". (1)H and 2D NMR spectra provide evidence for two different H-bonding motifs, in one of which the triazole CH groups form C-H···O═C bonds with the wheel carbonyl O atoms. This motif can be controlled and switched reversibly by competitive anion binding.     

Solid‐Phase Synthesis of Peptide Libraries Combining α‐Amino Acids with Inorganic and Organic Chromophores

The synthesis of two series of peptidic chains composed of bis(terpyridine)ruthenium(II) acceptor units and organic chromophores (coumarin, naphthalene, anthracene, fluorene) by stepwise solid‐phase peptide synthesis (SPPS) techniques is described. The first series of dyads comprises directly amide linked chromophores, while the second one possesses a glycine spacer between the two chromophores. All dyads were studied by UV/Vis and NMR spectroscopy, steady‐state luminescence, luminescence decay and electrochemistry, as well as by DFT calculations. The results of these studies indicate weak electronic coupling of the chromophores in the ground state. Absorpion spectra of all dyads are dominated by metal‐to‐ligand charge‐transfer (MLCT) bands around 500 nm. The bichromophoric systems, especially with coumarin as organic chromophore, display additional strong absorptions in the visible spectral region. All complexes are luminescent at room temperature (³MLCT). Efficient quenching of the fluorescence of the organic chromophore by the attached ruthenium complex is observed in all dyads. Excitation spectra indicate energy transfer from the organic dye to the ruthenium chromophore.     

A DNA–Fullerene Conjugate as a Template for Supramolecular Chromophore Assemblies: Towards DNA‐Based Solar Cells

A fullerene was covalently attached to a (dA)₂₀ template that serves as structural scaffold to self‐assemble an ordered and mixed array of ethynyl‐pyrene‐ and ethynyl‐Nile‐red‐nucleoside conjugates. Fluorescence spectroscopy revealed evidence for energy transfer between the two different chromophores. Moreover, fluorescence quenching is significantly enhanced by the attached fullerene in mixed assemblies of different chromophore ratios. This indicates exciton dissociation by electron transfer from the photo‐generated exciton on the chromophore stack to the fullerene. The fullerene–DNA‐conjugate was integrated as a photo‐active layer in solar cells that showed charge‐carrier generation in the spectral regime of all three components of the conjugate. This work clearly demonstrates that DNA is suitable as structural element for chromophore assemblies in future organic optoelectronic devices, such as solar cells.     

Effect of Component Mobility on the Properties of Macromolecular [2]Rotaxanes

Macromolecular [2]rotaxanes comprising a polymer axle and crown ether wheel were synthesized to evaluate the effect of component mobility on the properties of the axle polymer, especially its crystallinity. Living ring‐opening polymerization of δ‐valerolactone with a pseudorotaxane initiator with a hydroxy group at the axle terminus was followed by end‐capping with a bulky isocyanate. This yielded macromolecular [2]rotaxanes (M2Rs) possessing polyester axles of varying molecular weights. The crystallinity of the axle polymers of two series of M2Rs, with either fixed and movable components, was evaluated by differential scanning calorimetry. The results revealed that the effect of component mobility was significant in the fixed and movable M2Rs with a certain axle length, thus suggesting that the properties of the axle polymer depend on the mobility of the polyrotaxane components.     

Size Complementarity of Macrocyclic Cavities and Stoppers in Amide-Rotaxanes

New [2]rotaxanes were prepared by the threading and the slipping procedure, the latter having the advantage of not needing templating interactions. As a consequence, the first [2]rotaxane consisting of a tetraamide macrocycle and a pure hydrocarbon thread was synthesized (see 12a in Scheme 2). Sterically matching wheels and axles being the basic requirement of a successful slipping approach to rotaxanes, mono- and bishomologous wheels 5b , c with larger diameters than the parent 5a were synthesized and mechanically connected to amide axles 10a – c which were stoppered with blocking groups of different spatial demand (Scheme 1). The deslipping kinetics of the resulting rotaxanes 8a – c and 9a , b were measured and compared; it emerges that even slight increases in the wheel size require larger stoppers to stabilize the mechanical bond. Moreover, when the deslipping rate of 8a (amide wheel and amide axle) was determined in either DMF or THF, a strong dependence on the solvent polarity, which is caused by a differing extent of intramolecular H-bonds between the wheel and the axle, was observed. As expected, no such dependence was detected for rotaxane 12a (amide wheel and hydrocarbon axle) whose components cannot interact via H-bonds. The comparison of the sterically matching pairs of macrocycles and blocking groups, found by a systematic fitting based on the results of slipping and deslipping experiments, with other rotaxane types bearing similar stoppers allows conclusions concerning the relative cavity size of wheels of various structure.     

Controlling the rate of shuttling motions in [2]rotaxanes by electrostatic interactions: a cation as solvent-tunable brake

A series of rotaxanes, with phenolic axle centerpieces and tetralactam macrocycles as the wheels, has been prepared in good yields. The threaded rotaxane structure is confirmed in the gas phase by tandem mass spectrometric experiments through a detailed fragmentation pattern analysis, in solution by NMR spectroscopy, and in the solid state through X-ray crystallography. A close inspection of the 1H,1H NOESY and 1H,1H ROESY NMR data reveals the wheel to travel along the axle between two degenerate diamide "stations" close to the two stoppers. By deprotonation of a phenolic OH group in the axle centerpiece with Schwesinger's P1 base, surprisingly no additional shuttling station is generated at the axle center, although the wheel could form rather strong hydrogen bonds with the phenolate. Instead, the wheel continues to travel between the two diamide stations. Experimental data from 1H,1H NOESY spectra, together with theoretical calculations, show that strong electrostatic interactions between the phenolate moiety and the P1 cation displace the wheel from the "phenolate station". The cation acts as a "brake" for the shuttling movement. Instead of suppressing the shuttling motion completely, as observed in other rotaxanes, our rotaxane is the first system in which electrostatic interactions modulate the speed of the mechanical motion between a fast and a slow motion state as a response to a reversible external stimulus. By tuning these electrostatic interactions through solvent effects, the rate of movement can be influenced significantly, when for example different amounts of DMSO are added to dichloromethane. Besides the shuttling motion, circumrotation of the wheel around the axle is observed and analyzed by variable temperature NMR spectroscopy. Force field and AM1 calculations are in good agreement with the experimental findings.     

Linking [2]rotaxane wheels to create a new type of metal organic rotaxane framework

Three new [2]rotaxanes with aromatic nitrogen donors appended to the crown ether wheel have been synthesized and used as ligands to coordinate Cd(II) ions. One of these yields a new type of 2-periodic, metal organic rotaxane framework in which the wheel rather than the axle is used to link the metal nodes.     

Which One is Bulkier: The 3,5‐Dimethylphenyl or the 2,6‐Dimethylphenyl Group? Development of Size‐Complementary Molecular and Macromolecular [2]Rotaxanes

We developed novel size‐complementary molecular and macromolecular rotaxanes using a 2,6‐dimethylphenyl terminal group as the axle‐end‐cap group in dibenzo‐24‐crown‐8‐ether (DB24C8)‐based rotaxanes, where the 2,6‐dimethylphenyl group was found to be less bulky than the 3,5‐dimethylphenyl group. A series of molecular and macromolecular [2]rotaxanes that bear a 2,6‐dimethylphenyl group as the axle‐end‐cap were synthesized using unsubstituted and fluorine‐substituted DB24C8. Base‐induced decomposition into their constituent components confirmed the occurrence of deslipping, which supports the size‐complementarity of these rotaxanes. The deslipping rate was independent of the axle length but dependent on the DB24C8 substituents. A kinetic study indicated the rate‐determining step was that in which the wheel is getting over the end‐cap group, and deslipping proceeded via a hopping‐over mechanism. Finally, the present deslipping behavior was applied to a stimulus‐degradable polymer as an example for the versatile utility of this concept in the context of stimulus‐responsive materials.