稀土铽配合物TbY(m-MOBA)6(phen)2·2H2O的有机电致发光单层器件的研究

将新型稀土配合物TbY(m-MOBA)6(phen)2·2H2O掺杂到导电聚合物PVK中改善了铽配合物的成膜特性和导电性质.用此掺杂体系制作了单层发光器件,发现掺杂浓度为1:5,甩膜转速为1000r·min-1时器件的发光效果最好,起亮电压为9 V,最大亮度在17 V时达到15.7cd·m-2.对比[Tb(m-MOBA)3phen]2·2H2O的单层器件的发光,说明Y3 的存在促进了PVK到Tb3 的能量传递.     

稀土配合物Tb(p-MBA)3phen的有机电致发光

合成了一种新型的稀土铽配合物材料Tb(p-MBA)3phen,把它作为发光材料应用于有机电致发光中.把铽配合物掺杂在导电聚合物PVK中采用旋涂法制得发光层,并利用AlQ作为电子传输层制作了单层、双层有机电致发光器件:器件1(ITO/PVK):Tb(p-MBA)3phen/Al;器件2(ITO/PVK):Tb(p-MBA)3phen/AlQ/LiF/Al,得到了纯正的、明亮的Tb3 离子的绿光发射,4个特征峰分别对应着能级5D4到7Fj(j=6,5,4,3)的跃迁,而PVK的发光完全被抑制.研究了两种器件的电致发光性能,并通过选择AlQ的厚度得到了发光性能较好的器件,其最大亮度在20 V时达到152 cd·m-2.     

铽配合物[Tb(m-MBA)3phen]2·2H2O的有机电致发光

将稀土铽配合物[Tb(m MBA)3phen]2·2H2O作为发光材料应用于有机电致发光。把铽配合物掺杂在PVK中经甩膜制得发光层,并分别用AlQ和PBD作为电子传输层制作了两类有机电致发光器件。器件1:ITO PVK:[Tb(m MBA)3phen]2·2H2O PBD LiF Al;器件2:ITO PVK:[Tb(m MBA)3phen]2·2H2O AlQ LiF Al,研究了两种器件的电致发光性能,并通过选择AlQ的厚度得到了发光性能较好的用AlQ作为电子传输材料的器件,其最大亮度在20V时达到140cd·m-2。     

铽配合物TbY(o-MBA)6(phen)2与PVK掺杂体系的发光性质研究

合成了一种新型的稀土铽配合物材料TbY(o-MBA)6(phen)2,把它作为发光材料应用于有机电致发光中.把铽配合物掺杂在导电聚合物PVK中采用旋涂法制得发光层,并利用AlQ作为电子传输层制作了多种结构的电致发光器件 器件A,ITO/PVK∶TbY (o-MBA)6(phen)2/LiF/Al;器件B,ITO/PVK∶TbY (o-MBA)6(phen)2/AlQ/LiF/Al;器件C,ITO/PVK∶TbY (o-MBA)6(phen)2/BCP/AlQ/LiF/Al.对器件A和B得到了纯正的、明亮的Tb3+离子的绿光发射,4个特征峰分别对应着能级5D4到7Fj(j=6,5,4,3)的跃迁,而PVK的发光完全被抑制.研究了掺杂体系的光致发光性能和电致发光性能,认为在光致发光中,铽的发光主要来源于PVK到稀土配合物的Frster能量传递.而在电致发光中,铽的发光主要来源于稀土配合物直接捕获载流子形成激子复合发光.并通过优化选择得到了发光性能较好的器件B,其最大亮度在14 V时达到213 cd·m-2.     

邻菲啰啉钌(Ⅱ)配合物的结构及电致发光性能的研究

合成了三-(1,10-邻菲啰啉)钌发光配合物Ru(phen)3(PF6)2(phen=1,10-邻菲啰啉),得到了其单晶结构.单晶结构分析结果表明,Ru(phen)3(PF6)2具有层状结构特征,阳离子[Ru(phen)3]2+和阴离子PF-6分别构成了正电荷层和负电荷层,正、负电荷层交替排列形成了晶体结构.分别以Ru(phen)3Cl2和Ru(phen)3(PF6)2制备了单层结构的电化学发光器件(LECs),器件结构为[ITO/Ru(Ⅱ)-配合物(100 nm)/Al(200 nm)].结果显示:以Ru(phen)3(PF6)2为发光层的器件显示的最高效率和亮度分别为0.24 cd/A和1 829 cd/m2,而以Ru(phen)3Cl2为发光层的器件显示的最高效率和亮度分别为0.18 cd/A和350 cd/m2,表明Ru(phen)3(PF6)2比Ru(phen)3Cl2具有更优异的电致发光性能.     

铕镧共掺稀土配合物Eu0.5La0.5(TTA)3phen与PVK共混体系发光特性的研究

合成了一种新型的稀土铕配合物Eu0.5La0.5(TTA)3phen,把它作为发光材料应用于有机电致发光中.把铕配合物与高分子导电聚合物共混制得混合溶液,然后用旋涂的方法制得了发光层.实验中制备了单层、双层器件,讨论了器件的优化条件,并用能级图探讨了Eu0.5La0.5(TTA)3phen与PVK共混体系光致、电致发光的能量传递机制.优化后的双层器件,开启电压为6.5 V,在电压12.5 V,电流密度为68.48 mA*cm-2时器件达到最大亮度238.4 cd·m-2,发光效率0.35 cd·A-1.     

铽配合物Tb(2-MBA)_3·2H_2O和Tb(2-MBA)_3 phen的荧光性能研究

以2-甲基苯甲酸(2-MBA)为第一配体、1,10-邻菲罗啉(phen)为第二配体,制备了三元铽配合物Tb(2-MBA)3phen和二元铽配合物Tb(2-MBA)3·2H2O,并利用元素分析、红外光谱、紫外光谱、荧光光谱和荧光寿命对二者的结构与性能进行分析表征。研究结果表明:三元铽配合物Tb(2-MBA)3phen的荧光发射强度要强于二元铽配合物Tb(2-MBA)3·2H2O,而二者的荧光寿命恰好相反,三元铽配合物Tb(2-MBA)3phen的荧光寿命短于二元铽配合物Tb(2-MBA)3·2H2O。热重分析表明Tb(2-MBA)3·2H2O的热分解温度要远高于Tb(2-MBA)3phen。     

Sm(DBM)3phen的光致发光和电致发光性质

制备了一系列基于配合物Sm(DBM)3phen的电致发光器件. 研究了其光致发光(PL)和电致发光(EL)性质, 实验结果表明, Sm(DBM)3phen具有良好的电子注入和传输性能以及电致发光性能. 器件ITO/TPD(50 nm)/Sm(DBM)3phen(50 nm)/Alq3(30 nm)/LiF(1.0 nm)/Al的最大亮度和最大效率分别为150 cd/m2和0.72 cd/A, 器件表现为纯Sm3+离子的发光.     

共掺杂稀土配合物Tb0.5Eu0.5(asprin)3phen电致发光的研究

合成了共掺杂稀土配合物Tb0.5Eu0.5(asprin)3phen，将其掺杂到导电聚合物PVK中，制成结构为ITO／PVK：RE配合物／PBD／Al的电致发光器件，与PVK：Eu(asprin)3phen体系为发光层的相同结构的器件相比，我们发现铽离子的引入能猝灭PVK的发光，增强铕的发光，而Tb3 本身的发光很弱，几乎看不到，说明Pb3 在其中起到能量的中间传递作用，促进了PVK到Eu^3 的能量传递，本文就器件的发光特性及掺杂体系的能量传递进行了初步讨论。     

邻菲哕啉钌（Ⅱ）配合物的结构及电致发光性能的研究

合成了三-（1，10-邻菲啰啉）钌发光配合物Ru（phen）3（PF6）2（phen=1，10-邻菲啰啉），得到了其单晶结构．单晶结构分析结果表明，Ru（phen）3（PF6）2具有层状结构特征，阳离子[Ru（phen）3]^2＋和阴离子PF6^-分别构成了正电荷层和负电荷层，正、负电荷层交替排列形成了晶体结构．分别以Ru（phen）3Cl2和Ru（phen）3（PF6）2制备了单层结构的电化学发光器件（LECs），器件结构为[ITO／Ru（Ⅱ）-配合物（100nm）／Al（200nm）]．结果显示：以Ru（phen）3（PF6）2为发光层的器件显示的最高效率和亮度分别为0．24cd／A和1829cd／m^2，而以Ru（phen）3Cl2为发光层的器件显示的最高效率和亮度分别为0．18cd／A和350cd／m^2,表明Ru（phen）3（PF6）2比Ru（phen）3Cl2具有更优异的电致发光性能．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.