Laser-based linear and nonlinear guided elastic waves at surfaces (2D) and wedges (1D)

The characteristic features and applications of linear and nonlinear guided elastic waves propagating along surfaces (2D) and wedges (1D) are discussed. Laser-based excitation, detection, or contact-free analysis of these guided waves with pump–probe methods are reviewed. Determination of material parameters by broadband surface acoustic waves (SAWs) and other applications in nondestructive evaluation (NDE) are considered. The realization of nonlinear SAWs in the form of solitary waves and as shock waves, used for the determination of the fracture strength, is described. The unique properties of dispersion-free wedge waves (WWs) propagating along homogeneous wedges and of dispersive wedge waves observed in the presence of wedge modifications such as tip truncation or coatings are outlined. Theoretical and experimental results on nonlinear wedge waves in isotropic and anisotropic solids are presented.     

Nonlinear waves guided by a dielectric slab

We consider dispersion relations and field structure of TE-polarized guided waves travelling along an asymmetric dielectric slab surrounded by two different nonlinear media. For a given configuration there are four types of guided waves. Three of this four types possess at least one field maximum outside the slab region and have no counterpart in linear waveguide optics. The solutions of the dispersion relations depend now on an additional parameter making them more flexible with respect to the linear limit.     

Calculation of nonlinear modes guided by multilayer dielectric structures using the resonance technique

A simple and easily programmable approach based on the resonance method has been developed for analysing optical waves guided by complicated configurations such as multilayer dielectric structures with arbitrary nonlinear media. In this formulation both TE and TM polarizations are considered. In the present paper, as an example of the resonance technique application, the five-layer waveguiding configuration, including two arbitrary nonlinear media along with a linear film of arbitrary profile, is treated. Numerical results are presented in the form of guided power versus propagation constant for various parameters of the problem.     

Analysis of the dispersion relation of nonlinear slab-guided waves

The dispersion relations of TE-polarized nonlinear guided waves (NGWs) in a symmetrical slab configuration (linear slab embedded between two identical media with a Kerr nonlinearity) are investigated in detail. Among even and odd NGWs the waveguide can support also NGWs, revealing an asymmetrical field pattern. The excitation of these NGWs requires a minimum guided power flux indicating a bifurcation of the corresponding dispersion curves.     

New nonlinear magnetostatic surface waves in a ferromagnetic (YIG)

The general propagation characteristics of magnetostatic surface waves guided by a single interface of a semi-infinite nonlinear dielectric cover and a ferromagnetic substrate (YIG) have been derived. The nonlinear dielectric cover has intensity dependent refractive indices. The magnetostatic approximation is considered and retardation is ignored in describing the electromagnetic fields in the structure. The used magnetostatic approximation is leading to new waves and might be called nonlinear magnetostatic surface waves. The propagation of these waves is non-reciprocal in contrast to the linear magnetostaic surface waves, which had been only found in the negative direction of propagation.     

Nonlinear planar asymmetrical optical waveguides for sensing applications

This paper provides a theoretical analysis for TE polarized waves guided by a linear film surrounded by two asymmetrical nonlinear media for sensing applications. The sensitivity of the proposed sensor is derived. The conditions required for the sensor to exhibit its maximum sensitivity are presented. This analysis covers the case when the measurand is homogeneously distributed in the covering medium. We show that nonlinear sensors have sensitivities higher than those of linear sensors. The authors believe that optical sensing can be improved by introducing nonlinear waveguides.     

Review on second-harmonic generation of ultrasonic guided waves in solid media(Ⅰ): Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation(SHG) of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.     

Review on second-harmonic generation of ultrasonic guided waves in solid media (I):Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation (SHG) of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.     

非线性介质光波导中的传输功率和光学双稳态

本文对结构为非线性包层/线性芯层/非线性衬底的非线性介质光波导的传输特性进行了深入的分析,给出了模场分布函数,色散关系和传输功率的一组形式统一的公式,并对其传输功率的光学双稳态特性进行了讨论.     

Nonlinear wave interactions in patterned Silica and AlGaAs waveguides

We study nonlinear interactions between discrete optical solitons that propagate in different regimes of diffraction, and the nonlinear scattering of dispersive waves by local optical potentials. It is well known in optics that when linear coherent waves meet, they interfere without interactions. Linear waves also scatter through local optical structures not exchanging any power with the guided modes of these structures. As a focusing Kerr nonlinearity is present, such linearly-inhibited phenomena can exist. Our studies are performed in silica and AlGaAs nonlinear waveguides, excited by ultra-short pulses in the near infrared. Presented at 9-th International Workshop on Nonlinear Optics Applications, NOA 2007, May 17–20, 2007, Świnoujście, Poland     

Nonlinear waves guided by graded-index films

We derive both the dispersion relation and the power flow for waves guided by a linear graded-index film in contact with an arbitrary nonlinear cladding. For an exponential-like graded-index profile and a Kerr-like nonlinearity we present numerical results and compare them with those familar from the step-index profile.     

Higher harmonic generation in nonlinear waveguides of arbitrary cross-section

This article concerns the generation and properties of double harmonics in nonlinear isotropic waveguides of complex cross-section. Analytical solutions of nonlinear Rayleigh-Lamb waves and rod waves have been known for some time. These solutions explain the phenomenon of cumulative double harmonic generation of guided waves. These solutions, however, are only applicable to simple geometries. This paper combines the general approach of the analytical solutions with semi-analytical finite element models to generalize the method to more complex geometries, specifically waveguides with arbitrary cross-sections. Supporting comparisons with analytical solutions are presented for simple cases. This is followed by the study of the case of a rail track. One reason for studying nonlinear guided waves in rails is the potential measurement of thermal stresses in welded rail.     

Generalized dispersion relations for nonlinear slab-guided waves

The propagation of nonlinear guided waves in a slab configuration with arbitrary intensity-dependent dielectric functions is considered. General expressions for the dispersion relations and the guided power flux are derived without explicit integration of the nonlinear Helmholtz equations. One example is investigated in greater detail.     

接触缺陷的振动调制超声导波检测技术研究

针对常规线性超声检测方法无法实现板结构接触类缺陷(如微裂纹、脱粘等)检测问题,将超声导波技术与振动声调制技术相结合,利用稀疏分布传感器发展了一种板结构中接触缺陷非线性超声检测方法。通过低频振动改变缺陷的接触状况,使得通过接触面的高频导波信号的相位和幅值受到调制。对受低频振动调制的超声导波二维时间序列进行时频分析,由于接触类缺陷的存在,在振动调制超声导波序列的时频分布上出现明显的低频振动频率分量。利用提取出的低频振动频率下的超声导波信号,进行了结构接触缺陷成像处理。检测试验表明,基于振动声调制的超声导波缺陷成像方法可以实现结构中的接触类缺陷检测。      

On the existence of longitudinal or flexural waves in rods at nonlinear higher harmonics

This article theoretically studies the conditions for existence of longitudinal or flexural waves in nonlinear, isotropic rods and presents numerical simulations corroborating the theoretical results. It has been known that the existence of guided waves at nonlinearity induced double harmonics is subject to constraints which arise from the potential of power flux transfer from the primary generating mode to the generated higher order modes. The knowledge about the behavior of waves in rods at harmonics higher than double is still limited. This gap was addressed here by the method of perturbation coupled with wavemode orthogonality and forced response. This reduces the nonlinear problem to a forced linear problem which was subsequently investigated to formulate an angular order-based constraint as the condition of existence/nonexistence of nonlinearity-driven higher harmonics of longitudinal and flexural waves in rods.     

Vibro-modulation and Guided wave techniques for contact defect detection in plate

A nonlinear acoustic technique for detection of contact defects in plates was developed associating guided waves with vibro-modulation techniques.The low frequency vibration varies the interface area within the contact defect;then the amplitude and phase of high frequency guided waves reflected from the contact defect will be modulated.Due to the exiting of contact defects,there was obvious low frequency component in the time-frequency distribution of modulated guided wave series.Furthermore the nonlinear responses at frequency of vibration were extracted out and used for defect imaging.It was shown that the nonlinear guided wave imaging method based on vibration modulation can effectively characterize and locate the nonlinear contact defects.     

Nonlinear guided waves and symmetry breaking in left-handed waveguides

We analyze nonlinear guided waves in a planar waveguide made of a left-handed material surrounded by a Kerr-like nonlinear dielectric, and predict that such a waveguide can support fast and slow symmetric and antisymmetric nonlinear modes. We study the symmetry breaking bifurcation and asymmetric modes in such a symmetric structure. The analysis of nonlinear dispersion properties of the guided waves shows that the modes can be either forward or backward.     

Spatial soliton optical switches: a soliton-based equivalent particle approach

The spatial soliton plays a fundamental role as a robust, particle-like object which can be manipulated to switch or spatially scan collimated light channels or optical pulses which are incident at an oblique angle to an interface separating two or more selffocusing Kerr slab dielectrics. The underlying equivalent particle/multiparticle theory can also be employed to predict stability properties of nonlinear surface or guided waves, to derive an analytic expression for the nonlinear Goos-Hanchen shift at a nonlinear interface and to quantify the effect of material diffusion, linear and twophoton absorption on the switching behaviour of the light beam. Pulsed spatial switching effects are studied in order to illustrate the general predictive power of the equivalent particle theory.     

多量子阱光波导中非线性TM波的有限元解

本文用有限元法分析了任意非线性介质的多量子阱(MQW)光波导中传输与总光功率有关的TM波性质。用简单的迭代过程得到目洽解。给出了MQW波导具有不同非线性机理时,非线性TM波的色散关系、磁场(Hx)以及二个电场(Ey和Ez)的分布。结果表明:分子取向机理的光波导对非线性TM模存在不同的功率限制作用。     

Guided circumferential waves in orthotropic cylindrical curved plate and the mode conversion by the end-reflection

In ultrasonic nondestructive inspection of large-diameter pipes and curved plate, longitudinal cracks are detected more efficiently by using guided circumferential waves. In the present, the study of guided circumferential waves and their application in detecting longitudinal defect were relative adequate when pipe material is isotropic. Based on linear three-dimensional elasticity, an orthogonal polynomial series expansions approach is used for determining the guided circumferential waves dispersion curves in homogeneous infinitely long orthotropic hollow cylinders. Results are compared with those published earlier and with the finite element simulation to check up the accuracy and range of applicability of this polynomial approach. Through the analysis of the displacements distributions and finite element simulation, the mode conversion of guided circumferential waves by end-reflection in cylindrical curved plate is discovered.