Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Emulsifier‐free,organotellurium‐mediated living radical emulsion polymerization (emulsion TERP): Effect of monomer hydrophilicity

Emulsifier‐free, organotellurium‐mediated living radical emulsion polymerizations (emulsion TERPs) of methyl methacrylate (MMA) and n‐butyl methacrylate (BMA) with dimethyl ditelluride were carried out at two different stirring rates (220 rpm and 1000 rpm). In the emulsion TERP of MMA as a hydrophilic monomer, the molecular weight distribution (MWD) controls with both stirring rates were good with high polymerization rate (100% conversion at 1.5 h). On the other hand, in the emulsion TERP of BMA as a hydrophobic monomer, at 220 rpm the polymerization rate was much slow (～50% conversion at 22 h) and the MWD control was bad, but at 1000 rpm the polymerization was completed within 7 h and MWD control was good. These results suggest that monomer transportation from droplets to polymerizing particles via aqueous medium is important for good MWD control and steady polymerization in the emulsion TERP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006     

N‐Bromosuccinimide as a thermal iniferter for radical polymerization

N‐Bromosuccinimide (NBS) was used as a thermal iniferter for the initiation of the bulk polymerizations of methyl methacrylate, methyl acrylate, and styrene. The polymerizations showed the characteristics of a living polymerization: both the yields and the molecular weights of the resultant polymers increased linearly as the reaction time increased. The molecular weight distributions of the polymers were 1.42–1.95 under the studied conditions. The resultant polymers could be used as macroiniferters to reinitiate the polymerization of the second monomer. The copolymers poly(methyl methacrylate)‐b‐polystyrene and polystyrene‐b‐poly(methyl methacrylate) were obtained and characterized. End‐group analysis of the resultant poly(methyl methacrylate), poly(methyl acrylate), and polystyrene confirmed that NBS behaved as a thermal iniferter. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2567–2573, 2005     

Modeling of elementary reactions and kinetics of radical‐initiated methyl methacrylate polymerization in the presence of ferrocene

On the basis of quantum chemical modeling, a kinetic scheme of methyl methacrylate polymerization initiated by benzoyl peroxide in the presence of ferrocene was proposed. The process runs by mechanism, which includes the reactions of free radical polymerization, and the reactions leading to formation and operability of two type coordination active sites that are capable of converting into each other. On the basis of the proposed scheme, a kinetic model was developed. This model quantitatively described the following: the experimentally determined time dependences of the methyl methacrylate conversion, the conversion dependencies of the number‐average and weight‐average molar masses of poly(methyl methacrylate), the stereoregularity values of poly(methyl methacrylate), and the time dependencies of the methyl methacrylate conversion upon its polymerization on poly(methyl methacrylate) macroinitiators obtained in radical‐initiated polymerization in the presence of ferrocene. As a result of solving the inverse kinetic problem, the parameters of temperature dependences of the reaction rate coefficients of the proposed kinetic scheme were found.     

Synthesis of polyisoprene–poly(methyl methacrylate) block copolymers via a two‐electron‐transfer mechanism

Supramolecular complexes of alkali metals were used as catalysts in the polymerization of isoprene via a two‐electron‐transfer mechanism. The obtained polyisoprene, having a living end group, was subsequently used to initiate methyl methacrylate polymerization in tetrahydrofuran. Polyisoprene–poly(methyl methacrylate) block copolymers were obtained, and their structure was established with ¹H NMR, gel permeation chromatography, differential scanning calorimetry, and experiments of selective extraction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1086–1092, 2006     

Polymerization of vinyl monomers in the water–1,4-dioxane system containing peroxide and water-soluble polymer

Water-solube polymer (PST) containing triethylenetetramine side chain was prepared by the amination of chloromethylated polystyrene with triethylenetetramine in 1,4-dioxane. The polymerization of vinyl monomers was carried out in the water–organic solvent system containing PST and a very small amount of peroxide. The polymerization of methyl methacrylate proceeded smoothly in the presence of both peroxide and PST. It was found that the polymerization was initiated with the radicals generated by the interaction between hydroperoxide and amino groups of PST. 1,4-Dioxane hydroperoxide showed a high activity for the polymerization of methyl methacrylate. The maximum rate of the polymerization was observed at 60°C and in an approximately neutral solution. The addition of suitable amount of Cu(II) accelerated the polymerization of methyl methacrylate. The selective polymerization of vinyl monomers was observed in this system.     

Polymerization of methyl methacrylate by the binary system of the copper–amine complex type resin and carbon tetrachloride

The polymerization of vinyl monomers initiated by binary initiator systems composed of a copper–amine complex type resin and organic halides has been studied. These binary systems initiated the polymerization of various vinyl monomers. A kinetic study of the polymerization of methyl methacrylate initiated by the copper–amine complex resin–CCl₄ system was carried out, and it was found that the polymerization proceeds by way of a radical mechanism. This fact was also supported by the copolymerization of methyl methacrylate with styrene. The overall activation energy of the polymerization of methyl methacrylate was estimated as 8.4 kcal/mole. The activity of the initiator systems was greatly dependent upon the dissociation energy of carbon–halogen bonds in the organic halides. A possible initiation mechanism with the binary systems is proposed and discussed.     

Polymerization of methyl methacrylate initiated by Mn(III)–glycerol redox system

The kinetics of thermal polymerization of methyl methacrylate initiated by the redox system Mn(III)–glycerol was studied in aqueous sulfuric acid in the temperature range of 30–40°C, and the rates of polymerization, R_p, and Mn³⁺ disappearance, etc., were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rates of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and glycerol whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Synthesis of poly(methyl methacrylate)-<Emphasis Type="Italic">block</Emphasis>-poly(tetrahydrofuran) by photo-living radical polymerization using a 2,2,6,6-tetramethylpiperidine-1-oxyl macromediator

The synthesis of a poly(methyl methacrylate)-block-poly(tetrahydrofuran) (PMMA-b-PTHF) diblock copolymer was attained by the photo-living radical polymerization of methyl methacrylate using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) supported on the chain end of poly(tetrahydrofuran) (PTHF) as the macromediator. The polymerization was performed at room temperature by 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) as an initiator in the presence of bis(alkylphenyl)iodonium hexafluorophosphate as a photo-acid generator to produce the diblock copolymer consisting of poly(methyl methacrylate) (PMMA) and PTHF blocks connected through the TEMPO. The polymerization was confirmed to proceed in accordance with a living mechanism based on linear correlations for three different plots of the first order time-conversion, the molecular weight of the copolymer versus the monomer conversion, and the molecular weight versus the reciprocal of the initial concentration of the initiator. The molecular weight distribution of the block copolymer was dependent on the molecular weight of the macromediator based on the miscibility of PMMA and PTHF.     

Cyclic peroxides and related initiating systems for radical polymerization of methyl methacrylate

Cyclic peroxides as initiators for the radical polymerization of methyl methacrylate were proposed. The initial rates, initiation rates, and effective activation energies of polymerization initiated by cyclic peroxides and cyclic peroxide-1-pyridyl-2-ferrocene systems were determined. The radical yields to the volume upon the thermal decomposition of cyclic peroxides and their catalytic decomposition in the presence of 1-pyridyl-2-ferrocene were determined. In combination with 1-pyridyl-2-ferrocene cyclic peroxides form efficient initiating systems favoring an increase in the polymerization rate, a decrease in the molecular weights, and an increase in syndiotacticity of the synthesized poly(methyl methacrylate).     

Radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VI. Temperature dependence and effects of additives on methyl methacrylate–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the temperature dependence and effects of acetone and pyridine were investigated. It was found that even at ?78°C the polymerization rate was quite fast. The amounts of high molecular weight GPC peaks of both graft polymers and homopolymers increased with increasing irradiation temperature. The activation energy of the adsorbed state polymerization was low compared with that of bulk polymerization. The low molecular weight peaks of homopolymers decreased with acetone addition but were almost unaffected by pyridine. The low molecular weight peaks of homopolymers were thus polymerized by an anionic mechanism. In the methyl methacrylate–silica gel system both radical and anionic polymerization take place at the same time in formation of graft polymers and homopolymers. A reaction mechanism for the methyl methacrylate–silica gel system was proposed based on the results obtained to date.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Catalytic action of metallic salts in autoxidation and polymerization. VIII. Polymerization of methyl methacrylate by various metal acetylacetonate–cyclic ether hydroperoxides

Polymerization of methyl methacrylate by cyclic ether hydroperoxide–metal acetylacetonate systems for a number of different metals was carried out to compare with the tert-butyl hydroperoxide–metal acetylacetonate initiating systems. The rate of polymerization of methyl methacrylate with cyclic ether hydroperoxides as initiating systems was much higher than that with tert-butyl hydroperoxide. In cyclic ether hydroperoxide initiating systems, V(III), Co(II,III), Fe(III), Cu(II), and Mn(II) promoted the polymerization rate markedly, and Zn(II), Ni(II), Al(III), and Mg(II) had little or no effect; in the tert-butyl hydroperoxide initiating system only V(III), Co(II), and Mn(II) enhanced polymerization rate, and most of other metals showed little or no effect. Furthermore, noticeable differences in color of solution and appearance during polymerization, and in relation between conversion and the degree of polymerization were observed. The effect of metal acetylacetonates on hydroperoxide initiators in polymerization of methyl methacrylate was also compared with that on the decomposition of hydroperoxides.     

A facile strategy for synthesis of α,α′‐heterobifunctionalized poly (ε‐caprolactones) and poly (methyl methacrylate)s containing “clickable” aldehyde and allyloxy functional groups using initiator approach

Two new initiators, namely, 4‐(4‐(2‐(4‐(allyloxy) phenyl)‐5‐hydroxypentane 2‐yl) phenoxy)benzaldehyde and 4‐(4‐(allyloxy) phenyl)‐4‐(4‐(4‐formylphenoxy) phenyl) pentyl 2‐bromo‐2‐methyl propanoate containing “clickable” hetero‐functionalities namely aldehyde and allyloxy were synthesized starting from commercially available 4,4′‐bis(4‐hydroxyphenyl) pentanoic acid. These initiators were utilized, respectively, for ring opening polymerization of ε‐caprolactone and atom transfer radical polymerization of methyl methacrylate. Well‐defined α‐aldehyde, α′‐allyloxy heterobifunctionalized poly(ε‐caprolactones) (M_n,GPC: 5900–29,000, PDI: 1.26–1.43) and poly(methyl methacrylate)s (M_n,GPC: 5300–28800, PDI: 1.19–1.25) were synthesized. The kinetic study of methyl methacrylate polymerization demonstrated controlled polymerization behavior. The presence of aldehyde and allyloxy functionality on polymers was confirmed by ¹H NMR spectroscopy. Aldehyde‐aminooxy and thiol‐ene metal‐free double click strategy was used to demonstrate reactivity of functional groups on polymers. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of Glycerol in the Polymerization of Methyl Methacrylate by Mn(III) Acetate

The kinetics of the mechanism of the polymerization of methyl methacrylate initiated by the glycerol/Mn(III) acetate redox system has been investigated in aqueous sulfuric acid medium in the temperature range of 40 to 50 °C. The effects of glycerol, methyl methacrylate, metal ion, acetic acid, and sulfuric acid on the rates of polymerization have been studied. One striking observation is that the increase in monomer concentration steadily decreases the rate of polymerization, contrary to what was observed in the case of acrylonitrile. On the basis of these observations, an appropriate kinetic scheme and rate expression have been developed.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Incorporation of silver/carbon nanoparticles into poly(methyl methacrylate) via in situ miniemulsion polymerization and its influence on the glass‐transition temperature

Silver/carbon nanoparticles (9 nm) were incorporated, as reinforcements, into a matrix of poly(methyl methacrylate) via in situ miniemulsion polymerization. It was found by differential scanning calorimetry that the glass‐transition temperature of the poly(methyl methacrylate) showed an improvement of 14 °C with only 0.5 wt % nanoparticles in comparison with a pure poly(methyl methacrylate) control, which was also obtained by miniemulsion polymerization under the same conditions. This increase was related to a polymer chain mobility restriction due to a combination of bound plastic and joint plastic shell effects at the interphase and the surrounding regions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 511–518, 2007.     

Controlled/“living” atom transfer radical polymerization of methyl methacrylate in the synthesis of triblock copolymers from a poly(oxyethylene) macroinitiator

Atom transfer radical polymerization of methyl methacrylate initiated by a poly(oxyethylene) macroinitiator by the esterification of PEG 1500 with 2-chloro propionyl chloride was synthesized. These polymerization proceeds both in bulk and solution with a quantitative initiation efficiency, leading to A-B-A triblock copolymers. The macroinitiators and their block copolymers were characterized by FT-IR, FT-NMR and GPC analyses. In bulk polymerization, the kinetic study showed that the relationship between ln[M]₀/[M] vs time was linear showing that there is a constant concentration of active species throughout the polymerization and follow the first order kinetics with respect to monomer. Moreover, the experimental molecular weight of the block copolymers increased linearly with the monomer conversion and the polydispersity index remained between 1.3 and 1.5 throughout the polymerization. No formation of homo poly(methyl methacrylate) could also be detected, and all this confirms that the bulk polymerization proceeds in a controlled/“living” manner.     

Viscosity effects in cobaloxime‐mediated catalytic chain‐transfer polymerization of methacrylates

The effect of bulk viscosity on the cobaloxime‐mediated catalytic chain‐transfer polymerization of methacrylates at 60 °C was investigated by both the addition of high molecular weight poly(methyl methacrylate) to methyl methacrylate polymerization and the dilution of benzyl methacrylate polymerization by toluene. The results indicate that the bulk viscosity is not directly linked to the chain‐transfer activity. The previously measured relationship between chain‐transfer‐rate coefficient and monomer viscosity therefore probably reflects changes at the molecular level. However, the results in this article do not necessarily disprove a diffusion‐controlled reaction rate because cobaloxime diffusion is expected to scale with the monomer friction coefficient rather than bulk viscosity. Considering the published data, to date we are not able to distinguish between a diffusion‐controlled reaction rate or a mechanism directly affected by the methacrylate substituent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 782–792, 2002; DOI 10.1002/pola.10152