Effect of the Ar-Ni(s) potential on the cross section for Ar+CH4/Ni{111} collision-induced desorption and the need for a more accurate CH4/Ni{111} potential

In a previous paper [L. Sun, P. de Sainte Claire, O. Meroueh, and W. L Hase, J. Chem. Phys. 114, 535 (2001)], a classical trajectory simulation was reported of CH(4) desorption from Ni{111} by Ar-atom collisions. At an incident angle theta(i) of 60 degrees (with respect to the surface normal), the calculated collision-induced desorption (CID) cross sections are in excellent agreement with experiment. However, for smaller incident angles the calculated cross sections are larger than the experimental values and for normal collisions, theta(i)=0 degrees , the calculated cross sections are approximately a factor of 2 larger. This trajectory study used an analytic function for the Ar+Ni(s) intermolecular potential which gives an Ar-Ni{111} potential energy minimum which is an order of magnitude too deep. In the work reported here, the previous trajectory study is repeated with an Ar+Ni(s) analytic intermolecular potential which gives an accurate Ar-Ni{111} potential energy minimum and also has a different surface corrugation than the previous potential. Though there are significant differences between the two Ar+Ni(s) analytic potentials, they have no important effects on the CID dynamics and the cross sections reported here are nearly identical to the previous values. Zero-point energy motions of the surface and the CH(4)-Ni(s) intermolecular modes are considered in the simulation and they are found to have a negligible effect on the CID cross sections. Calculations of the intermolecular potential between CH(4) and a Ni atom, at various levels of theory, suggest that there are substantial approximations in the ab initio calculation used to develop the CH(4)+Ni{111} potential. The implication is that the differences between the trajectory and experimental CID cross sections may arise from an inaccurate CH(4)+Ni{111} potential used in the trajectory simulation.     

Quasiclassical trajectory study of the reaction H+CH4(nu3 = 0,1)-->CH3+H2 using a new ab initio potential energy surface

Detailed quasiclassical trajectory calculations of the reaction H+CH4(nu3 = 0,1)-->CH3 + H2 using a slightly updated version of a recent ab initio-based CH5 potential energy surface [X. Zhang et al., J. Chem. Phys. 124, 021104 (2006)] are reported. The reaction cross sections are calculated at initial relative translational energies of 1.52, 1.85, and 2.20 eV in order to make direct comparison with experiment. The relative reaction cross section enhancement ratio due to the excitation of the C-H antisymmetric stretch varies from 2.2 to 3.0 over this energy range, in good agreement with the experimental result of 3.0 +/- 1.5 [J. P. Camden et al., J. Chem. Phys. 123, 134301 (2005)]. The laboratory-frame speed and center-of-mass angular distributions of CH3 are calculated as are the vibrational and rotational distributions of H2 and CH3. We confirm that this reaction occurs with a combination of stripping and rebound mechanisms by presenting the impact parameter dependence of these distributions and also by direct examination of trajectories.     

Full-dimensional time-dependent wave packet dynamics of H2 + D2 reaction

Collision induced dissociation (CID), four center reaction (4C), and single exchange reaction (SE) in H(2) (v(1) = high) + D(2) (v(2) = low) were studied by means of time-dependent wave packet approach within a full-dimensional model. Initial state-selected total reaction probabilities for the three competitive processes have been computed on two realistic global potential energy surfaces of Aguado-Suárez-Paniagua and Boothroyd-Martin-Keogh-Peterson (BMKP) with the total angular momentum J = 0. The role of both vibrationally excited and rotationally excited reagents was examined by varying the initial vibrational and rotational states. The vibrational excitation of the hot diatom gives an enhancement effect on the CID process, while the vibrational excitation of the cold diatom gives an inhibition effect. The rotational excitation of both reagents has a significant effect on the reaction process. The 4C and SE probabilities are at least one order of magnitude smaller than the CID probabilities over the energy range considered. Isotope substitution effects were also studied by substituting the collider D(2) by H(2) and HD on the BMKP potential energy surfaces. The CID process is most efficient for the H(2) + D(2) combination and least efficient for the H(2) + H(2) combination and is different for the 4C and SE processes.     

Quasiclassical trajectory study of energy transfer and collision-induced dissociation in hyperthermal Ar + CH4 and Ar + CF4 collisions

We present a study of energy transfer in collisions of Ar with methane and perfluoromethane at hyperthermal energies (E(coll) = 4-10 eV). Quasiclassical trajectory calculations of Ar + CX(4) (X = H, F) collisions indicate that energy transfer from reagents' translation to internal modes of the alkane molecule is greatly enhanced by fluorination. The reasons for the enhancement of energy transfer upon fluorination are shown to emerge from a decrease in the hydrocarbon vibrational frequencies of the CX(4) molecule with increasing the mass of the X atom, and to an increase of the steepness of the Ar-CX(4) intermolecular potential. At high collision energies, we find that the cross section of Ar + CF(4) collisions in which the amount of energy transfer is larger than needed to break a C-F bond is at least 1 order of magnitude larger than the cross sections of Ar + CH(4) collisions producing CH(4) with energy above the dissociation limit. In addition, collision-induced dissociation is detected in short time scales in the case of the fluorinated species at E(coll) = 10 eV. These results suggest that the cross section for degradation of fluorinated hydrocarbon polymers under the action of nonreactive hyperthermal gas-phase species might be significantly larger than that of hydrogenated hydrocarbon polymers. We also illustrate a practical way to derive intramolecular potential energy surfaces for bond-breaking collisions by improving semiempirical Hamiltonians based on grids of high-quality ab initio calculations.     

Fully converged integral cross sections of collision induced dissociation, four-center, and single exchange reactions, and accuracy of the centrifugal sudden approximation in H2 + D2 reaction

The initial state selected time-dependent wave packet method was employed to calculate the integral cross sections for the H(2) + D(2) reaction with and without the centrifugal sudden (CS) approximation by including all important K (the projection of the total angular momentum on the body-fixed axis) blocks. With a full-dimensional model, the first fully converged coupled-channel (CC) cross sections for different competitive processes from the ground rotational state were obtained: collision induced dissociation (CID), four-center (4C) reaction and single exchange (SE) reaction. The effect of the total angular momentum J on the reaction dynamics of H(2) + D(2) and the accuracy of the CS approximation have also been studied. It was found that the CID and SE processes occur in a wide range of J values while the 4C process can only take place in a narrow window of J values. For this reason, the CC cross section for the 4C channel is merely comparable to the SE channel. A comparison of the integral cross sections from CC and CS calculations showed that the CS approximation works well for the CID process but not for the 4C and SE processes, and the discrepancy between the CC and CS cross sections grows larger as the translational energy and/or the vibrational energy increase(s).     

Vibrational predissociation dynamics of methane-Ar: an ab initio approach

We calculated the cross sections for vibrational predissociation of methane-Ar induced by excitation of the methane nu 3 mode with the aid of an ab initio CH4-Ar potential depending explicitly on the nu 3 and nu 1 normal coordinates of the CH4 monomer. We found that dissociation into CH4 fragments excited in the nu 1 mode, a V-->V' process with very low kinetic energy release, strongly dominates over direct dissociation into Ar and ground state CH4, and is responsible for the line broadening observed experimentally. The (observed and calculated) strong variation of the line widths for the Van der Waals levels excited in combination with the nu 3 mode (giving states of A, F and E symmetry) is related to the opening up of appropriate nu 1 dissociation channels and the occurrence of rotational resonances in the nu 1 continuum in the energy range of the quasi-bound nu 3 levels.     

Quasiclassical trajectory study of the collision-induced dissociation of CH3SH+ + Ar

Quasiclassical trajectory calculations were carried out to study the dynamics of energy transfer and collision-induced dissociation (CID) of CH(3)SH(+) + Ar at collision energies ranging from 4.34 to 34.7 eV. The relative abundances calculated for the most relevant product ions are found to be in good agreement with experiment, except for the lowest energies investigated. In general, the dissociation to form CH(3)(+) + SH is the dominant channel, even though it is not among the energetically favored reaction pathways. The results corroborate that this selective dissociation observed upon collisional activation arises from a more efficient translational to vibrational energy transfer for the low-frequency C-S stretching mode than for the high-frequency C-H stretching modes, together with weak couplings between the low- and high-frequency modes of vibration. The calculations suggest that CID takes place preferentially by a direct CH(3)(+) + SH detachment, and more efficiently when the Ar atom collides with the methyl group-side of CH(3)SH(+).     

Overtone-induced dissociation and isomerization dynamics of the hydroxymethyl radical (CH2OH and CD2OH). II. Velocity map imaging studies

The dissociation of the hydroxymethyl radical, CH(2)OH, and its isotopolog, CD(2)OH, following excitation in the 4ν(1) region (OH stretch overtone, near 13,600 cm(-1)) was studied using sliced velocity map imaging. A new vibrational band near 13,660 cm(-1) arising from interaction with the antisymmetric CH stretch was discovered for CH(2)OH. In CD(2)OH dissociation, D atom products (correlated with CHDO) were detected, providing the first experimental evidence of isomerization in the CH(2)OH ? CH(3)O (CD(2)OH ? CHD(2)O) system. Analysis of the H (D) fragment kinetic energy distributions shows that the rovibrational state distributions in the formaldehyde cofragments are different for the OH bond fission and isomerization pathways. Isomerization is responsible for 10%-30% of dissociation events in all studied cases, and its contribution depends on the excited vibrational level of the radical. Accurate dissociation energies were determined: D(0)(CH(2)OH → CH(2)O + H) = 10,160 ± 70 cm(-1), D(0)(CD(2)OH → CD(2)O + H) = 10,135 ± 70 cm(-1), D(0)(CD(2)OH → CHDO + D) = 10,760 ± 60 cm(-1).     

Quasiclassical trajectory study of the CH3++HD-->CH2D++H2 Reaction

A full dimensional ab initio potential energy surface for the CH5+ system based on coupled cluster electronic structure calculations and capable of describing the dissociation of methonium ion into methyl cation and molecular hydrogen (J. Phys. Chem. A 2006, 110, 1569) is used in quasiclassical trajectory calculations of the reaction CH3++HD-->CH2D++H2 for low collision energies of relevance to astrochemistry. Cross sections for the exchange are obtained at several relative translational energies and a fit to the energy dependence of the cross sections is used to obtain the rate constant at temperatures between 10 and 50 K. The calculated rate constant at 10 K agrees well with the previously reported experimental value. Internal energy distributions of the products are presented and discussed in the context of zero-point energy "noncompliance".     

A quasiclassical trajectory study of collisional energy transfer and dissociation in He + H2(v,j) using a new potential energy surface

Quasiclassical trajectories for He + H2 were carried out using the recent ab initio potential of Boothroyd, Martin, and Peterson (J. Chem. Phys. 2003, 119, 3187) and results for the 348 (v, j) states of H2 are compared to those of earlier calculations that used the potential of Wilson, Kapral, and Burns (Chem. Phys. Lett. 1974, 24, 4884). Examined are the cross sections for energy transfer and dissociation, the extent of threshold elevation, and the interconversion of vibrational and rotational energy. Implications for modeling the interstellar medium are discussed.     

Quasi-classical trajectory study of the dynamics of the Cl + CH4→ HCl + CH3 reaction

We present an on-the-fly classical trajectory study of the Cl + CH(4)→ HCl + CH(3) reaction using a specific reaction parameter (SRP) AM1 Hamiltonian that was previously optimized for the Cl + ethane reaction [S. J. Greaves et al., J. Phys Chem A, 2008, 112, 9387]. The SRP-AM1 Hamiltonian is shown to be a good model for the potential energy surface of the title reaction. Calculated differential cross sections, obtained from trajectories propagated with the SRP-AM1 Hamiltonian compare favourably with experimental results for this system. Analysis of the vibrational modes of the methyl radical shows different scattering distributions for ground and vibrationally excited products.     

Quasiclassical trajectory study of the collision-induced dissociation dynamics of Ar + CH3SH+ using an ab initio interpolated potential energy surface

Classical trajectory calculations have been performed to investigate the collision-induced dissociation (CID) of the CH(3)SH(+) cation with Ar atoms. A new intramolecular potential energy surface for the CH(3)SH(+) cation is evaluated by interpolation of 3000 ab initio data points calculated at the MP2/6-311G(d,p) level of theory. The new potential energy surface includes seven accessible dissociation channels of the cation. The present QCT calculations show that migration of hydrogen atoms, leading to the rearrangement CH(3)SH(+) <--> CH(2)SH(2)(+), is significant at the collision energies considered (6.5-34.7 eV) and that the formation of CH(3)(+), CH(3)S(+), and CH(2)(+) cations takes place primarily by a "shattering" mechanism in which the products are formed just after the collision. The theoretical product abundances are found to be in qualitative agreement with the experimental data. However, at high collision energies, the calculated total cross sections for the formation of CH(3)(+) and CH(2)SH(+) cations are noticeably larger than the experimental determinations. Several features of the dynamics of the CID processes are discussed.     

Quantum mechanical calculations for the H2O + hnu --> O(1D) + H2 photodissociation process

Quantum mechanical wavepacket calculations for the photodissociation of water in the second absorption band are presented. Using O + H2 Jacobi coordinates, partial cross sections for the O(1D) + H2 channel are calculated for different initial rotational states. Conical intersection and Renner-Teller effects are included. The branching ratios for the four accessible dissociation channels at 121.6 nm are in good agreement with experiment (J. Chem. Phys. 1982, 77, 2432). The calculations predict significant rotational and vibrational excitation of the H2 fragments. Photodissociation of ortho and para water produces predominantly, but not exclusively, ortho and para H2 fragments, respectively.     

Overtone-induced dissociation and isomerization dynamics of the hydroxymethyl radical (CH2OH and CD2OH). I. A theoretical study

The dissociation of the hydroxymethyl radical, CH(2)OH, and its isotopolog, CD(2)OH, following the excitation of high OH stretch overtones is studied by quasi-classical molecular dynamics calculations using a global potential energy surface (PES) fitted to ab initio calculations. The PES includes CH(2)OH and CH(3)O minima, dissociation products, and all relevant barriers. Its analysis shows that the transition states for OH bond fission and isomerization are both very close in energy to the excited vibrational levels reached in recent experiments and involve significant geometry changes relative to the CH(2)OH equilibrium structure. The energies of key stationary points are refined using high-level electronic structure calculations. Vibrational energies and wavefunctions are computed by coupled anharmonic vibrational calculations. They show that high OH-stretch overtones are mixed with other modes. Consequently, trajectory calculations carried out at energies about ~3000 cm(-1) above the barriers reveal that despite initial excitation of the OH stretch, the direct OH bond fission is relatively slow (10 ps) and a considerable fraction of the radicals undergoes isomerization to the methoxy radical. The computed dissociation energies are: D(0)(CH(2)OH → CH(2)O + H) = 10,188 cm(-1), D(0)(CD(2)OH → CD(2)O + H) = 10,167 cm(-1), D(0)(CD(2)OH → CHDO + D) = 10,787 cm(-1). All are in excellent agreement with the experimental results. For CH(2)OH, the barriers for the direct OH bond fission and isomerization are: 14,205 and 13,839 cm(-1), respectively.     

On the statistical nature of collision and surface-induced dissociation: a theoretical investigation of aluminum clusters

The unimolecular dissociation dynamics of aluminum clusters following collision with either a rare gas atom or a surface is investigated by classical trajectory simulations with model potentials. Two conformers of Al(6) with very distinct shapes, i.e., the spherical O(h) and planar C(2)(h) clusters, are considered in this work. The initial vibrational energy and angular momentum distributions resulting from collision, as well as the energy and angular momentum resolved lifetime distributions, of excited clusters were determined for both collision-induced dissociation (CID) and surface-induced dissociation (SID) processes. The partitioning of excitation energy acquired upon collision was found to depend on the excitation mechanism (CID or SID), as well as on the cluster molecular shape, especially in the case of CID. For both types of processes, the energy and angular momentum resolved excited cluster lifetime distributions were found to decay exponentially, in agreement with statistical theories of chemical reactions, suggesting intrinsic Rice-Ramsperger-Kassel-Marcus (RRKM) behavior. Moreover, the simulated microcanonical rate constants determined from the cluster lifetime distributions are in good agreement with the predictions of the orbiting transition state model of phase space theory (OTS/PST), which further supports the statistical character of cluster CID and SID. Thus, in the CID and SID of highly fluxional systems such as aluminum clusters, the rate of intramolecular vibrational energy redistribution (IVR) is much faster than the dissociation rate, which validates one of the key assumptions, i.e., post-collision statistical behavior, underlying the models that are routinely used to determine cluster binding energies from experimental CID/SID cross sections.     

Quasiclassical trajectory study of the Cl+CH4 reaction dynamics on a quadratic configuration interaction with single and double excitation interpolated potential energy surface

An ab initio interpolated potential energy surface (PES) for the Cl+CH(4) reactive system has been constructed using the interpolation method of Collins and co-workers [J. Chem. Phys. 102, 5647 (1995); 108, 8302 (1998); 111, 816 (1999); Theor. Chem. Acc. 108, 313 (2002)]. The ab initio calculations have been performed using quadratic configuration interaction with single and double excitation theory to build the PES. A simple scaling all correlation technique has been used to obtain a PES which yields a barrier height and reaction energy in good agreement with high level ab initio calculations and experimental measurements. Using these interpolated PESs, a detailed quasiclassical trajectory study of integral and differential cross sections, product rovibrational populations, and internal energy distributions has been carried out for the Cl+CH(4) and Cl+CD(4) reactions, and the theoretical results have been compared with the available experimental data. It has been shown that the calculated total reaction cross sections versus collision energy for the Cl+CH(4) and Cl+CD(4) reactions is very sensitive to the barrier height. Besides, due to the zero-point energy (ZPE) leakage of the CH(4) molecule to the reaction coordinate in the quasiclassical trajectory (QCT) calculations, the reaction threshold falls below the barrier height of the PES. The ZPE leakage leads to CH(3) and HCl coproducts with internal energy below its corresponding ZPEs. We have shown that a Gaussian binning (GB) analysis of the trajectories yields excitation functions in somehow better agreement with the experimental determinations. The HCl(v'=0) and DCl(v'=0) rotational distributions are as well very sensitive to the ZPE problem. The GB correction narrows and shifts the rotational distributions to lower values of the rotational quantum numbers. However, the present QCT rotational distributions are still hotter than the experimental distributions. In both reactions the angular distributions shift from backward peaked to sideways peaked as collision energy increases, as seen in the experiments and other theoretical calculations.     

Guided-ion beam and theoretical study of the potential energy surface for activation of methane by W+

A guided-ion beam tandem mass spectrometer is used to study the reactions, W(+) + CH(4) (CD(4)) and [W,C,2H](+) + H(2) (D(2)), to probe the [W,C,4H](+) potential energy surface. The reaction W(+) + CH(4) produces [W,C,2H](+) in the only low-energy process. The analogous reaction in the CD(4) system exhibits a cross section with strong differences at the lowest energies caused by zero-point energy differences, demonstrating that this reaction is slightly exothermic for CH(4) and slightly endothermic for CD(4). The [W,C,2H](+) product ion reacts further at thermal energies with CH(4) to produce W(CH(2))(x)(+) (x = 2-4). At higher energies, the W(+) + CH(4) reaction forms WH(+) as the dominant ionic product with smaller amounts of WCH(3)(+), WCH(+), and WC(+) also formed. The energy dependent cross sections for endothermic formation of the various products are analyzed and allow the determination of D(0)(W(+)-CH(3)) approximately 2.31 +/- 0.10 eV, D(0)(W(+)-CH(2)) = 4.74 +/- 0.03 eV, D(0)(W(+)-CH) = 6.01 +/- 0.28 eV, and D(0)(W(+)-C) = 4.96 +/- 0.22 eV. We also examine the reverse reaction, [W,C,2H](+) + H(2) (D(2)) --> W(+) + CH(4) (CH(2)D(2)). Combining the cross sections for the forward and reverse processes yields an equilibrium constant from which D(0)(W(+)-CH(2)) = 4.72 +/- 0.04 eV is derived. Theoretical calculations performed at the B3LYP/HW+/6-311++G(3df,3p) level yield thermochemistry in reasonable agreement with experiment. These calculations help identify the structures and electronic states of the species involved and characterize the potential energy surface for the [W,C,4H](+) system.     

Vibrationally inelastic collisions in H+ +CO system: comparing quantum calculations with experiments

State-resolved cross beam experiments [H. Udseth et al., J. Chem. Phys. 60, 3051 (1974); J. Krutein and F. Linder, J. Chem. Phys. 71, 599 (1979); G. Niedner-Schatteburg and J. P. Toennies, Adv. Chem. Phys. LXXXII, 553 (1992)], coupled with proton energy loss spectroscopy for the inelastic scattering of H(+) from CO in the collision range of 10-30 eV show very low vibrational excitation of the target molecule. Stimulated by the experimentally observed low vibrational inelasticity in the system the ground and the first two low-lying excited electronic potential-energy surfaces have been computed using the ab initio multireference configuration interaction method. Quantum dynamics has been performed on the ground potential energy surface in the framework of vibrational close-coupling rotational infinite-order sudden approximation. The various computed dynamical attributes such as differential and integral cross sections, and average vibrational energy transfer are analyzed in detail, and compared successfully with the available experimental results.