超塑变形的力学行为与本构描述

本文简要介绍了超塑变形的力学行为,包括宏观力学特征、变形机理及主要的微观组织变化;综述了超塑性本构关系的研究进展。      

冻土的有限变形本构关系的实验研究

根据有限变形理论,给出了冻土三轴蠕变实验数据处理时所需Green应变和Kirchhoff应力的计算公式,并根据冻土三轴蠕变实验结果给出冻土的有限变形本构关系及其蠕变参数。通过对冻土的实验数据对比分析可知:在相同试验条件下,应变较小时,小应变ε1 和Green应变Ez的数值几乎相等,随着应变的增加,两种表征方式的计算结果差别越来越大,可见对于冻土如果不考虑试件变形前后长度的变化,计算得出的应变偏离实际变形情况较大,因此冻土材料的本构关系采用有限变形表征更确切。根据冻土的有限变形本构关系计算得到的冻结壁内侧最大径向位移更接近实测结果,因此冻结壁设计计算依据冻土的有限变形本构关系更为合理。对今后冻结工程的设计具有参考价值。     

汽车玻璃高温蠕变特性的实验与理论研究

通过对汽车用挡风玻璃进行不同温度、不同应力水平下的单轴拉伸蠕变实验,揭示了其非线性蠕变变形特性.实验发现,不同温度和载荷下的蠕变曲线形状类似,高温(550℃～590℃)下该材料的减速蠕变变形不很明显,主要表现为稳态和加速蠕变变形,且其断裂数据符合Monkman-Grant关系,应力和温度对其影响不显著.基于实验结果,本文建立了非线性高温蠕变本构方程.理论预测与实验数据进行了比较,结果表明所提出的本构方程能较好地描述汽车玻璃高温蠕变变形的全过程.     

基于对数应力率大应变本构关系的参数标定研究

在所有率型弹塑性本构模型中,只有对数应力率对应的本构模型能够满足自适应准则.基于对数应力率,采用实心圆轴扭转实验,对大应变弹塑性本构模型中的参数标定问题进行了讨论.推导出了考虑Swift效应时端部自由实心圆轴扭转变形的变形率、对数旋率、Kirchhoff应力及Kirchhoff应力的对数应力率.对于等向强化大应变弹塑性本构关系,给出了由实心圆轴扭转实验标定的、基于Kirchhhoff应力对数应力率的本构关系中塑性刚度函数的表达式.分析了扭转圆轴的Swift效应对塑性刚度函数的影响.结果表明,实心圆轴扭转的轴向伸长变形和径向变形对基于对数应力率大应变本构关系中的塑性刚度函数都有影响.当不考虑Swift效应时,所得塑性刚度函数表达式与不考虑Swift效应时基于Jaumann应力率的塑性刚度函数表达式相同.     

有机玻璃在高应变率下的损伤型非线性粘弹性本构关系及破坏准则

对两种有机玻璃高应变率下的大变形和破坏行为进行了实验研究,通过改进文献[2]本构关系的非线性弹性项并引入损伤参量,建立了一个适用于更大变形范围、能描述应力平台及本构失稳的损伤型非线性粘弹性本构方程。相应地,从临界损伤量概念出发,提出以应变和应变率为控制变量的破坏准则。不论是本构关系还是破坏准则,理论计算均与试验结果吻合良好。     

超塑性材料约束胀形中的空洞损伤与变形局部化

将含有二阶段空洞长大模型的本构关系引入大变形刚黏塑性有限元中，研究了空洞敏感材料向锥台形凹模内超塑约束胀形时空洞化损伤与变形局部化行为，详细阐述静水背压Ｐｈ、初始空洞长大速率β＿０以及模具几何形状（锥角θ，模腔高度Ｈｐ）对局部化以及空洞断裂行为的影响，给出实现完全贴模条件下Ｐｈ－θ，Ｐｈ－β＿０，Ｈｐ－θ以及Ｐｈ－Ｈｐ间临界关系。     

96.5Sn-3.5Ag钎料合金的时相关单轴应变循环变形行为及其本构关系研究

在室温下对96.5Sn-3.5Ag钎料合金进行了不同加载波形下的单轴应变循环实验。研究了在具有不同保持时间、不同应变率、不同应变幅值及其历史对材料的循环变形行为的影响。基于材料时相关变形行为,提出了统一粘塑性本构模型,并对该材料的变形行为进行本构模拟。实验结果表明:该钎料合金单轴变形行为具有应变率、保持时间以及应变幅值依赖性。本构关系的预言结果与实验结果吻合得一致性说明该种模型能够很好地描述材料的单轴应变循环变形行为。     

有机玻璃在高应变率下的损伤型非线性粘弹性本构关系及破坏准则

对两种有机玻璃高应变率下的大变形和破坏行为进行了实验研究,通过改进文献[2]本构关系的非线性弹性项并引入损伤参量,建立了一个适用于更大变形范围、能描述“应力平台”及“本构失稳”的损伤型非线性粘弹性本构方程。相应地,从临界损伤量概念出发,提出以应变和应变率为控制变量的破坏准则。不论是本构关系还是破坏准则,理论计算均与试验结果吻合良好。     

我国塑性本构关系研究的近况

本文概述了近十年来我国塑性本构关系研究的主要情况,包括微应变与有限变形下的一般性理论研究、微观与宏观相结合的本构理论讨论,实验研究和数值模拟的研究.     

一种描述形状记忆合金拟弹性变形行为的本构关系

本文给出一种描述形状记忆合金拟弹性变形现象的本构关系,可用于多晶材料在一般应力状态下及单晶材料在单轴应力下的变形情况。该本构关系采用弹性应变与相变应变迭加形式,物理意义明显,形式简洁。对 Cu-Zn-Sn 合金及 Ti-Ni 合金材料的变形行为进行了模拟计算,结果与实验值有较好的吻合。     

Mechanics modeling for deformation of nano-grained metals

The electro-deposition technique is capable of producing nano-grained bulk copper specimens that exhibit superplastic extensibility at room temperature. Metals of such small grain sizes deform by grains squeezing past each other, with little distortion occurring in the grain cores. Accommodation mechanisms such as grain boundary diffusion and grain rotation control the kinetics of the process. A model of a 9-grain cluster is proposed that incorporates both the Ashby-Verrall mechanism and the 30° rotation of closely linked grain pairs. A constitutive relation is derived that relates the creep strain rate linearly to the difference between the applied stress and a threshold stress. The creep rate and the threshold stress predicted by the model are in quantitative agreement with the experimental data.     

Superplastic characteristics of high purity yttria-stabilized zirconia polycrystals

The mechanical characteristics of superplastic yttria-stabilized zirconia polycrystals have been analyzed as a function of stress, temperature and grain size. The evolution of the stress exponent n with stress found in high purity materials is similar to that observed in superplastic metals. True creep parameters can be ascribed to the deformation mechanism at high stresses. By contrast, the creep parameters exhibit a continuous evolution with stress, temperature and grain size at low stresses. The threshold stress formalism used in conventional and high strain rate superplastic metals accounts for the mechanical characteristics observed in fine-grained zirconia polycrystals.     

Determination of the Constitutive Relation Parameters of a Metallic Material by Measurement of Temperature Increment in Compressive Dynamic Tests

The mechanical behaviour of a material can be established by an analytic expression called the constitutive relation that shows stress as a function of plastic strain, strain rate, temperature, and possibly other thermo-mechanical variables. The constitutive relation usually includes such parameters as coefficients or exponents that must be determined. At a high strain rate, the heat generated during the deformation process is directly related to the plastic deformation energy of the material. This energy can be calculated from the plastic work, resulting in an expression that includes the constitutive relation parameters as variables. The heat generated can also be estimated by measuring the temperature surface of the specimen during compressive tests using the technique of infrared thermography. The objective of this paper is to present a procedure for determining the constitutive relation parameters by measuring the temperature increase associated with plastic strain in compressive Hopkinson tests. The procedure was applied to estimate the parameters of the Johnson–Cook constitutive relation of an aluminium alloy (Al6082).     

一种描述形状记忆合金拟弹性变形行为的本构关系

本文给出一种描述形状记忆合金拟弹性变形现象的本构关系,可用于多晶材料在一般应力状态下及单晶材料在单轴应力下的变形情况。该本构关系采用弹性应变与相变应变迭加形式,物理意义明显,形式简洁。对 Cu-Zn-Sn 合金及 Ti-Ni 合金材料的变形行为进行了模拟计算,结果与实验值有较好的吻合。     

Properties of a nonlinear viscoelastoplastic model of Maxwell type with two material functions

General qualitative properties of quasistatic curves for creep, relaxation, strain, and others are studied analytically. These curves are obtained on the basis of a one-dimensional constitutive relation of Maxwell type. Some constraints are proposed for the material functions to adequately describe the typical properties of experimental curves for a wide class of viscoelastoplastic materials. The applicability of the proposed model to describe, in particular, the superplastic deformation is analyzed. The effects that cannot be described in the framework of this model are found and its applicability range is revealed.     

岩石单轴压缩作用下变形局部化的梯度塑性解

采用梯度塑性理论研究单轴压缩作用下岩石变形局部化,得到了单轴压缩作用下岩石变形局部化带宽度的一维、二维解析解,为实验测定内部材料长度参数提供了理论依据.     

Inelastic constitutive equations of polycrystalline metals subjected to finite deformation part I: Effect of grain rotation

In this article, a set of inelastic constitutive equations of polycrystalline metals is derived by combining a finite deformation kinematics of single crystal component, and a shear stress-shear strain relation of slip system based on a thermoactivated motion of dislocation. Interactions among grains are incorporated by “constant deformation gradient assumption.” The forms of these equations are rather simple internal variable theory types. By using these equations, some fundamental effects of grain rotations on inelastic behaviors of polycrystalline metals in a finite deformation range under complex loading and elevated temperature conditions are demonstrated. Some comments are given on a problem of plastic spin tensor.     

A constitutive relation for pseudo-elastic behaviour in shape memory alloys

A constitutive relation to describe pseudo-elastic deformation in shape memory alloys is presented in this paper. It is capable of describing deformation behaviour of polycrystalline materials under triaxial stress state as well as of monocrystalline materials under one-dimensional condition. Total strain rate is supposed to be composed of elastic strain rate and transformation strain rate. Deformation behaviour of Cu−Zn−Sn alloy and Ti−ni alloy is simulated by use of the proposed constitutive relation. it is shown that simulated results are in a good agreement with experimental data. The project supported by National Natural Science Foundation of China.