卤代-2-(3-甲基-5-取代-4H-1,2,4-三唑-4-基)-苯甲酸的合成

邻氮基苯甲酸;缩合反应;卤代-2-(3-甲基-5-取代-4H-1;2;4-三唑-4-基)-苯甲酸的合成     

无催化剂条件下2-氨基-3-氰基-4-芳基-7,7-二甲基-5-氧代-5,6,7,8-四氢-4H-苯并吡喃的合成

芳亚苄基丙二腈;二甲基环己二酮;无催化剂条件下2-氨基-3-氰基-4-芳基-7;7-二甲基-5-氧代-5;6;7;8-四氢-4H-苯并吡喃的合成     

2-氨基-6-氟-9-(4-羟基-3-羟甲基丁基)嘌呤的合成

报道了2-氨基-6-氟-9-(4-羟基-3-羟甲基丁基)嘌呤(1)的合成, 通过对起始原料2-氨基-6-氯-9-(4-乙酰氧基-3-乙酰氧甲基丁基)嘌呤(2)水解脱去乙酰基, 得到2-氨基-6-氯-9-(4-羟基-3-羟甲基丁基)嘌呤(3). 化合物3与三甲胺乙醇溶液在混合溶剂[V(THF)∶V(DMF)＝3∶1]中反应得到相应的氯化铵盐4, 然后与KF在DMF溶剂中反应, 得到化合物1. 产品经UV-vis, IR, ¹H NMR, ¹⁹F NMR和MS表征. 考察了反应温度、氟化试剂等因素对氟化反应的影响, 为6位含氟的嘌呤核苷类化合物的合成提供了一种直接、简易的新方法.     

1,5-二-(3-硝基苯基)-1,4-戊二烯-3-酮的超声合成

1;5-二-(3-硝基苯基)-1;4-戊二烯-3-酮的超声合成;二-（硝基苯基）-戊二烯-酮;合成;超声;催化     

6-亚甲基-17α-乙酰氧基-18-甲基-19-失碳-孕甾-4-烯-3,20-二酮的合成新方法研究

报道了16-亚甲基-17α-乙酰氧基-18-甲基-19-失碳-孕甾-4-烯-3,20-二酮的新合成方法. 以左旋18-甲基炔诺酮为原料, 通过脱水、氧化、环合、热解、环氧化、开环氧环、水解七步反应合成了目标化合物, 总收率20.0%. 其中化合物12, 13, 14, 15, 16尚未见文献报道.     

微波作用下1-苯基-5-[5-(芳胺羰基甲硫基)-4-苯基-1,2,4-三唑-3-甲硫基]四唑的合成及生物活性

采用微波和相转移催化法通过1-苯基-5-(4-苯基-1,2,4-三唑-5-巯基-3-甲硫基)四唑(2)与2-氯乙酰芳胺(3)反应高效、快速地合成了10种尚未见文献报道的1-苯基-5-[5-(芳胺羰基甲硫基)-4-苯基-1,2,4-三唑-3-甲硫基]四唑. 其结构经 IR, ¹H NMR, ¹³C NMR 和元素分析表征. 生物活性实验结果表明, 该类化合物在较低浓度下部分化合物对小麦芽有很好的促进作用.     

1-(2, 6, 6-三甲基-1-环己烯基-)-3-甲基-2-丁烯-4-醛合成新工艺

1-(2; 6; 6-三甲基-1-环己烯基-)-3-甲基-2-丁烯-4-醛合成新工艺;(三甲基环己烯基)甲基丁烯醛;卡宾反应; β-紫罗兰酮;三甲基溴化硫     

2-氨基-5-(2-氯吡啶-4-基)-1,3,4-噻二唑衍生物的合成及生物活性

酰胺;2-氨基-5-(2-氯吡啶-4-基)-1;3;4-噻二唑衍生物的合成及生物活性     

2-乙氧羰基-3-溴-4-甲基-5-甲酰基-吡咯的合成

2-乙氧羰基-3-溴-4-甲基-5-甲酰基-吡咯的合成;乙氧羰基二甲基吡咯;乙氧羰基溴二甲基吡咯;乙氧羰基溴甲基甲酰基吡咯     

2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-5-(取代苯基亚甲基)-4- 噻唑啉酮的合成

以2-氨基-5-取代苯氧甲基-1,3,4-噻二唑(1)为起始原料, 合成了中间体2-氯乙酰氨基-5-取代苯氧甲基-1,3,4-噻二唑)-2-乙酰亚胺(2)和2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-4-噻唑啉酮(3), 化合物3进一步与取代苯甲醛发生类Knoevenagle缩合反应, 得到了一系列2-(5-取代苯氧甲基-1,3,4-噻二唑-2-亚胺基)-5-(取代苯基亚甲基)-4-噻唑啉酮类化合物4a～4p. 目标化合物4a～4p的结构经IR, ¹H NMR和元素分析确证.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.