Surface plasmon resonance biosensor for genetically modified organisms detection

The development of a surface plasmon resonance (SPR) affinity biosensor based on DNA hybridisation is described. This biosensor has been applied to genetically modified organisms (GMOs) detection. Single stranded DNA (ssDNA) probes were immobilised on the sensor chip of an SPR device and the hybridisation between the immobilised probe and the complementary sequence (target) was monitored. The probe sequences were internal to the sequence of 35S promoter and NOS terminator which are inserted sequences in the genome of GMO regulating the transgene expression. The system has been optimised using synthetic oligonucleotides, then applied to real samples analysis. Samples, containing the transgenic target sequences, were amplified by polymerase chain reaction (PCR) and then detected with the SPR biosensor.     

Microbead-assisted PDA sensor for the detection of genetically modified organisms

A simple and sensitive approach for the detection of marker protein, phosphinothricin acetyltransferase, from genetically modified crops was developed based on the colorimetric transition of polydiacetylene (PDA) vesicles in combination with silica microbeads. PDAs have attracted a great deal of interests as a transducing material due to their special features that allow colorimetric response to sensory signals, as well as their inherent simplicity. However, most PDA-based biosensors require additional analytical equipment such as a fluorescence microscope or UV–Vis spectrometer. In this study, we report a new approach to increase the degree of color transition by coupling antibody-conjugated PDA vesicles with silica microbeads in an effort to monitor the results with the unaided eye or simple RGB analysis. By immobilizing PDA vesicles on silica microbeads, we were able to overcome the disadvantages of colloidal PDA-based sensors and increase the degree of colorimetric changes in response to target molecules to a concentration as low as 20 nM. The additional stresses were given to PDA vesicles by antigen–antibody bridging of PDA vesicles coupled with microbeads, resulting in enhanced blue–red color transition. All the results showed that PDA vesicles in conjunction with silica microbeads will be a promising transducing material for the detection of target proteins in diagnostic and biosensing applications.     

Production of certified reference materials for the detection of genetically modified organisms

Certified reference materials (CRMs) are an essenIial tool in the quality assurance of analytical measurements. They are produced, certified, and used in accordance with relevant ISO (International Organization for Standardization) and BCR (Community Bureau of Reference) guidelines. The Institute for Reference Materials and Measurements (IRMM; Geel, Belgium) has produced the first powdery genetically modified organism (GMO) CRMs in cooperation with the Institute for Health and Consumer Protection (Ispra, Italy). Until now, different weight percentages in the range of 0-5% for 4 GMOs in Europe were produced and certified: Bt (Bacillus thuringiensis)-11 and Bt-176 maize, Roundup Ready soybean, and MON810 maize. Bt-11 and Bt-176 maize and Roundup Ready soybean were produced by IRMM on behalf of Fluka Chemie AG (Buchs, Switzerland). Characterization of used base material is the first step in production and is especially important for GMO CRMs. The production of powdery GMO CRMs and methods used for production control are described. Thorough control of homogeneity and stability are essential for certification of reference materials and ensure validity of the certificate for each bottle of a batch throughout a defined shelf-life. Because production of reference materials and their maintenance are very labor- and cost-intensive tasks, the usefulness of new types of GMO CRMs must be estimated carefully.     

Advances in molecular techniques for the detection and quantification of genetically modified organisms

Progress in genetic engineering has led to the introduction of genetically modified organisms (GMOs) whose genomes have been altered by the integration of a novel sequence conferring a new trait. To allow consumers an informed choice, many countries require food products to be labeled if the GMO content exceeds a certain threshold. Consequently, the development of analytical methods for GMO screening and quantification is of great interest. Exponential amplification by the polymerase chain reaction (PCR) remains a central step in molecular methods of GMO detection and quantification. In order to meet the challenge posed by the continuously increasing number of GMOs, various multiplex assays have been developed for the simultaneous amplification and/or detection of several GMOs. Classical agarose gel electrophoresis is being replaced by capillary electrophoresis (CE) systems, including CE chips, for the rapid and automatable separation of amplified fragments. Microtiter well-based hybridization assays allow high-throughput analysis of many samples in a single plate. Microarrays have been introduced in GMO screening as a technique for the simultaneous multianalyte detection of amplified sequences. Various types of biosensors, including surface plasmon resonance sensors, quartz crystal microbalance piezoelectric sensors, thin-film optical sensors, dry-reagent dipstick-type sensors and electrochemical sensors were introduced in GMO screening because they offer simplicity and lower cost. GMO quantification is performed by real-time PCR (rt-QPCR) and competitive PCR. New endogenous reference genes have been validated. rt-QPCR is the most widely used approach. Multiplexing is another trend in this field. Strategies for high-throughput multiplex competitive quantitative PCR have been reported.     

Surface plasmon resonance for detection of genetically modified organisms in the food supply

A review is presented demonstrating that biospecific interaction analysis, using surface plasmon resonance (SPR) and biosensor technologies is a simple, rapid, and automatable approach to detect genetically modified organisms (GMOs). Using SPR, we were able to monitor in real-time the hybridization between oligonucleotide or polymerase chain reaction (PCR)-generated probes and target single-stranded PCR products obtained by using as substrates DNA isolated from normal or transgenic soybean and maize. This procedure allows a one-step, nonradioactive detection of GMOs. PCR-generated probes are far more efficient in detecting GMOs than are oligodeoxyribonucleotide probes. This is expected to be a very important parameter, because information on low percentage of GMOs is of great value. Determination of the ability of SPR-based analysis to quantify GMOs should be considered a major research field for future studies, especially for the analyses of food supplies.     

Detection methods and performance criteria for genetically modified organisms

Detection methods for genetically modified organisms (GMOs) are necessary for many applications, from seed purity assessment to compliance of food labeling in several countries. Numerous analytical methods are currently used or under development to support these needs. The currently used methods are bioassays and protein- and DNA-based detection protocols. To avoid discrepancy of results between such largely different methods and, for instance, the potential resulting legal actions, compatibility of the methods is urgently needed. Performance criteria of methods allow evaluation against a common standard. The more-common performance criteria for detection methods are precision, accuracy, sensitivity, and specificity, which together specifically address other terms used to describe the performance of a method, such as applicability, selectivity, calibration, trueness, precision, recovery, operating range, limit of quantitation, limit of detection, and ruggedness. Performance criteria should provide objective tools to accept or reject specific methods, to validate them, to ensure compatibility between validated methods, and be used on a routine basis to reject data outside an acceptable range of variability. When selecting a method of detection, it is also important to consider its applicability, its field of applications, and its limitations, by including factors such as its ability to detect the target analyte in a given matrix, the duration of the analyses, its cost effectiveness, and the necessary sample sizes for testing. Thus, the current GMO detection methods should be evaluated against a common set of performance criteria.     

G-quadruplex DNAzyme as the turn on switch for fluorimetric detection of genetically modified organisms

A novel fluorescent sensor for detection of genetically modified organisms was developed, and in the sensor G-quadruplex DNAzyme (G-quadruplex-hemin complex) was used as the turn on switch.     

New trends in bioanalytical tools for the detection of genetically modified organisms: an update

Despite the controversies surrounding genetically modified organisms (GMOs), the production of GM crops is increasing, especially in developing countries. Thanks to new technologies involving genetic engineering and unprecedented access to genomic resources, the next decade will certainly see exponential growth in GMO production. Indeed, EU regulations based on the precautionary principle require any food containing more than 0.9% GM content to be labeled as such. The implementation of these regulations necessitates sampling protocols, the availability of certified reference materials and analytical methodologies that allow the accurate determination of the content of GMOs. In order to qualify for the validation process, a method should fulfil some criteria, defined as “acceptance criteria” by the European Network of GMO Laboratories (ENGL). Several methods have recently been developed for GMO detection and quantitation, mostly based on polymerase chain reaction (PCR) technology. PCR (including its different formats, e.g., double competitive PCR and real-time PCR) remains the technique of choice, thanks to its ability to detect even small amounts of transgenes in raw materials and processed foods. Other approaches relying on DNA detection are based on quartz crystal microbalance piezoelectric biosensors, dry reagent dipstick-type sensors and surface plasmon resonance sensors. The application of visible/near-infrared (vis/NIR) spectroscopy or mass spectrometry combined with chemometrics techniques has also been envisaged as a powerful GMO detection tool. Furthermore, in order to cope with the multiplicity of GMOs released onto the market, the new challenge is the development of routine detection systems for the simultaneous detection of numerous GMOs, including unknown GMOs.     

Detecting authorized and unauthorized genetically modified organisms containing vip3A by real-time PCR and next-generation sequencing

The growing number of biotech crops with novel genetic elements increasingly complicates the detection of genetically modified organisms (GMOs) in food and feed samples using conventional screening methods. Unauthorized GMOs (UGMOs) in food and feed are currently identified through combining GMO element screening with sequencing the DNA flanking these elements. In this study, a specific and sensitive qPCR assay was developed for vip3A element detection based on the vip3Aa20 coding sequences of the recently marketed MIR162 maize and COT102 cotton. Furthermore, SiteFinding-PCR in combination with Sanger, Illumina or Pacific BioSciences (PacBio) sequencing was performed targeting the flanking DNA of the vip3Aa20 element in MIR162. De novo assembly and Basic Local Alignment Search Tool searches were used to mimic UGMO identification. PacBio data resulted in relatively long contigs in the upstream (1,326 nucleotides (nt); 95 % identity) and downstream (1,135 nt; 92 % identity) regions, whereas Illumina data resulted in two smaller contigs of 858 and 1,038 nt with higher sequence identity (>99 % identity). Both approaches outperformed Sanger sequencing, underlining the potential for next-generation sequencing in UGMO identification.

Molecular toolbox for the identification of unknown genetically modified organisms

Competent laboratories monitor genetically modified organisms (GMOs) and products derived thereof in the food and feed chain in the framework of labeling and traceability legislation. In addition, screening is performed to detect the unauthorized presence of GMOs including asynchronously authorized GMOs or GMOs that are not officially registered for commercialization (unknown GMOs). Currently, unauthorized or unknown events are detected by screening blind samples for commonly used transgenic elements, such as p35S or t-nos. If (1) positive detection of such screening elements shows the presence of transgenic material and (2) all known GMOs are tested by event-specific methods but are not detected, then the presence of an unknown GMO is inferred. However, such evidence is indirect because it is based on negative observations and inconclusive because the procedure does not identify the causative event per se. In addition, detection of unknown events is hampered in products that also contain known authorized events. Here, we outline alternative approaches for analytical detection and GMO identification and develop new methods to complement the existing routine screening procedure. We developed a fluorescent anchor-polymerase chain reaction (PCR) method for the identification of the sequences flanking the p35S and t-nos screening elements. Thus, anchor-PCR fingerprinting allows the detection of unique discriminative signals per event. In addition, we established a collection of in silico calculated fingerprints of known events to support interpretation of experimentally generated anchor-PCR GM fingerprints of blind samples. Here, we first describe the molecular characterization of a novel GMO, which expresses recombinant human intrinsic factor in Arabidopsis thaliana. Next, we purposefully treated the novel GMO as a blind sample to simulate how the new methods lead to the molecular identification of a novel unknown event without prior knowledge of its transgene sequence. The results demonstrate that the new methods complement routine screening procedures by providing direct conclusive evidence and may also be useful to resolve masking of unknown events by known events.     

A rapid method for detection of genetically modified organisms based on magnetic separation and surface-enhanced Raman scattering

In this study, a new method combining magnetic separation (MS) and surface-enhanced Raman scattering (SERS) was developed to detect genetically modified organisms (GMOs). An oligonucleotide probe which is specific for 35 S DNA target was immobilized onto gold coated magnetic nanospheres to form oligonucleotide-coated nanoparticles. A self assembled monolayer was formed on gold nanorods using 5,5'-dithiobis (2-nitrobenzoic acid) (DTNB) and the second probe of the 35 S DNA target was immobilized on the activated nanorod surfaces. Probes on the nanoparticles were hybridized with the target oligonucleotide. Optimization parameters for hybridization were investigated by high performance liquid chromatography. Optimum hybridization parameters were determined as: 4 μM probe concentration, 20 min immobilization time, 30 min hybridization time, 55 °C hybridization temperature, 750 mM buffer salt concentration and pH: 7.4. Quantification of the target concentration was performed via SERS spectra of DTNB on the nanorods. The correlation between the target concentration and the SERS signal was found to be linear within the range of 25-100 nM. The analyses were performed with only one hybridization step in 40 min. Real sample analysis was conducted using Bt-176 maize sample. The results showed that the developed MS-SERS assay is capable of detecting GMOs in a rapid and selective manner.     

PCR technology for screening and quantification of genetically modified organisms (GMOs)

Although PCR technology has obvious limitations, the potentially high degree of sensitivity and specificity explains why it has been the first choice of most analytical laboratories interested in detection of genetically modified (GM) organisms (GMOs) and derived materials. Because the products that laboratories receive for analysis are often processed and refined, the quality and quantity of target analyte (e.g. protein or DNA) frequently challenges the sensitivity of any detection method. Among the currently available methods, PCR methods are generally accepted as the most sensitive and reliable methods for detection of GM-derived material in routine applications.The choice of target sequence motif is the single most important factor controlling the specificity of the PCR method. The target sequence is normally a part of the modified gene construct, for example a promoter, a terminator, a gene, or a junction between two of these elements. However, the elements may originate from wildtype organisms, they may be present in more than one GMO, and their copy number may also vary from one GMO to another. They may even be combined in a similar way in more than one GMO. Thus, the choice of method should fit the purpose. Recent developments include event-specific methods, particularly useful for identification and quantification of GM content. Thresholds for labelling are now in place in many countries including those in the European Union. The success of the labelling schemes is dependent upon the efficiency with which GM-derived material can be detected. We will present an overview of currently available PCR methods for screening and quantification of GM-derived DNA, and discuss their applicability and limitations. In addition, we will discuss some of the major challenges related to determination of the limits of detection (LOD) and quantification (LOQ), and to validation of methods.     

Fluorescent oxidation products derived from DBD-thiocarbamoyl amino acid in the modified Edman sequencing analysis

The fluorescent product obtained by the oxidation of 7-N, N-dimethylaminosulfonyl-4-(2,1,3-benzoxadiazolyl) (DBD)-thiocarbamoyl (TC)-proline with NaNO(2)/H(+) in the modified Edman sequencing procedure was identified as the corresponding thiazolyl compound, N-[(8-dimethylaminosulfonyl)thiazolo[5,4, e]benzo[2,1,3]oxadiazol-5-yl]-L-proline, formed by the attack of the sulfur atom of the thiocarbamoyl group on the benzofurazan skeleton. The reaction mechanism for the formation of the fluorescent compound from DBD-TC primary and secondary amines is also discussed.     

Colorimetric detection of genetically modified organisms based on exonuclease III-assisted target recycling and hemin/G-quadruplex DNAzyme amplification

An isothermal colorimetric method is described for amplified detection of the CaMV 35S promoter sequence in genetically modified organism (GMO). It is based on (a) target DNA-triggered unlabeled molecular beacon (UMB) termini binding, and (b) exonuclease III (Exo III)-assisted target recycling, and (c) hemin/G-quadruplex (DNAzyme) based signal amplification. The specific binding of target to the G-quadruplex sequence-locked UMB triggers the digestion of Exo III. This, in turn, releases an active G-quadruplex segment and target DNA for successive hybridization and cleavage. The Exo III impellent recycling of targets produces numerous G-quadruplex sequences. These further associate with hemin to form DNAzymes and hence will catalyze H₂O₂-mediated oxidation of the chromogenic enzyme substrate ABTS^2? causing the formation of a green colored product. This finding enables a sensitive colorimetric determination of GMO DNA (at an analytical wavelength of 420 nm) at concentrations as low as 0.23 nM. By taking advantage of isothermal incubation, this method does not require sophisticated equipment or complicated syntheses. Analyses can be performed within 90 min. The method also discriminates single base mismatches. In our perception, it has a wide scope in that it may be applied to the detection of many other GMOs.

Open image in new window

Graphical abstract An isothermal and sensitive colorimetric method is described for amplified detection of CaMV 35S promoter sequence in genetically modified organism (GMO). It is based on target DNA-triggered molecular beacon (UMB) termini-binding and exonuclease III assisted target recycling, and on hemin/G-quadruplex (DNAzyme) signal amplification.

     

Detection of genetically modified organisms in food: critical points for quality assurance

 The detection of genetically modified organisms (GMOs) by the polymerase chain reaction (PCR) is a complex multiparameter problem. Therefore, a number of critical issues in respect to quality control need to be considered. For practical purposes, the PCR process itself can be divided into three subprocesses: template isolation and reaction setup (pre-PCR), PCR reaction and detection of amplification products, and data evaluation (post-PCR). Crucial factors for the pre-PCR process are the following: homogeneity of the sample to be analysed, performance of template isolation and purification in terms of yield and purity, standardized process for the estimation of concentrations of genomic DNA and all reagents used in the reaction. For the PCR itself, crucial factors to be controlled are: setup of reactions, batch to batch variations of reagents, temperature-time programs used for the PCR amplification, and the performance of different types of hardware (e.g. different brands of thermocyclers). The crucial factor for the post-PCR process is the detection of the amplification products of the PCR. The tremendous sensitivity of PCR methods requires a careful and consequent separation of the three processes in terms of hardware, laboratory space and sample handling. The avoidance of contamination is one of the most critical factors. The goal of quality assurance measures must be to ensure appropriate results at maximum sensitivity. The complexity of any PCR system used for the detection of GMOs leads to the requirement of a careful validation process for any laboratory using such methods. For qualitative analyses crucial validation parameters are: specificity, selectivity, repeatability, intermediate precision, reproducibility, limit of detection and robustness. Received: 5 October 1998 / Accepted: 22 February 1999     

Multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole DNA biosensor for label-free detection of genetically modified organisms by QCM and EIS

In this paper, we describe DNA electrochemical detection for genetically modified organism (GMO) based on multi-wall carbon nanotubes (MWCNTs)-doped polypyrrole (PPy). DNA hybridization is studied by quartz crystal microbalance (QCM) and electrochemical impedance spectroscopy (EIS). An increase in DNA complementary target concentration results in a decrease in the faradic charge transfer resistance (R_ct) and signifying “signal-on” behavior of MWCNTs-PPy-DNA system. QCM and EIS data indicated that the electroanalytical MWCNTs-PPy films were highly sensitive (as low as 4 pM of target can be detected with QCM technique). In principle, this system can be suitable not only for DNA but also for protein biosensor construction.     

Real-time polymerase chain reaction detection of cauliflower mosaic virus to complement the 35S screening assay for genetically modified organisms

Labeling of genetically modified organisms (GMOs) is now in place in many countries, including the European Union, in order to guarantee the consumer's choice between GM and non-GM products. Screening of samples is performed by polymerase chain reaction (PCR) amplification of regulatory sequences frequently introduced into genetically modified plants. Primers for the 35S promoter from Cauliflower mosaic virus (CaMV) are those most frequently used. In virus-infected plants or in samples contaminated with plant material carrying the virus, false-positive results can consequently occur. A system for real-time PCR using a TaqMan minor groove binder probe was designed that allows recognition of virus coat protein in the sample, thus allowing differentiation between transgenic and virus-infected samples. We measured the efficiency of PCR amplification, limits of detection and quantification, range of linearity, and repeatability of the assay in order to assess the applicability of the assay for routine analysis. The specificity of the detection system was tested on various virus isolates and plant species. All 8 CaMV isolates were successfully amplified using the designed system. No cross-reactivity was detected with DNA from 3 isolates of the closely related Carnation etched ring virus. Primers do not amplify plant DNA from available genetically modified maize and soybean lines or from different species of Brassicaceae or Solanaceae that are natural hosts for CaMV. We evaluated the assay for different food matrixes by spiking CaMV DNA into DNA from food samples and have successfully amplified CaMV from all samples. The assay was tested on rapeseed samples from routine GMO testing that were positive in the 35S screening assay, and the presence of the virus was confirmed.