Effects of cluster formation on spectra of benzo[a]pyrene and benzo[e]pyrene

Absorption and fluorescence emission spectra of the polycyclic aromatic hydrocarbons benzo[a]pyrene (BaP) and benzo[e]pyrene (BeP) in solution and adsorbed on silica have been obtained and compared to examine the spectroscopic effects of clustering. Molecular mechanics calculations with the UFF potential were done to optimize monomer, dimer and trimer geometries, and energy differences were determined by MP2/6-31G* calculations. Fluorescence emission spectra of adsorbed BeP and BaP display a red shift that progresses with increased loading, and the two differ in their photodegradation kinetics. The experimental and theoretical results are found to be consistent.     

Reinvestigation of the jutz synthesis of benzo [e] pyrene and benzo [a] pyrene derivatives from benzanthrene

Base-catalyzed reactions of benzanthrene with “vinamidinium salts” ($\text{2a-c}$ ) followed by thermal electrocyclic ring closure are regiospecific affording only benzo [e] pyrene derivatives, contrary to previous claims.     

Magnetic circular dichroism spectra of benzo[a]pyrene

Magnetic circular dichroism (MCD) and absorption spectra of benzo[a]pyrene have been measured. The absorption spectra have been assigned by comparing the experimental results with the signs of Faraday B terms and transition energies computed by using the Pariser—Parr—Pople SCF-π-MO CI method.     

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.     

A convenient new synthesis of benzo[a]pyrene

A convenient new synthesis of the ubiquitous environmental carcinogen benzo[a]pyrene (BaP) is described. In the key step, the method entails Suzuki coupling of naphthalene 2-boronic acid with 2-bromobenzene-1,3-dialdehyde and requires only three steps. It is considerably shorter and simpler than the older methods and provides BaP in higher overall yield.     

A simple method for the determination of benzo[a]pyrene and benzo[k]fluoranthene in a mixture

Atmospheric particulate matter is routinely analysed for the concentration of the carcinogen benzo[a]pyrene (BaP). Benzo[k]fluoranthene (BkF) has identical spectral characteristics and interferes in the fluorimetric estimation. A simple method for the determination of BaP in the presence of BkF is described. Based on quenching of the fluorescence of BaP by the addition of small amounts of nitromethane, the method can be used for accurate estimation for wide concentration ratios of BaP to BkF ranging from 0.1 to 10.0.     

Second-derivative constant-wavelength synchronous scan spectrofluorimetry for determination of benzo[b]fluoranthene, benzo[a]pyrene and indeno[1,2,3-cd]pyrene in drinking water

The use of derivative constant-wavelength synchronous scan fluorimetry is reported for the determination of three polycyclic aromatic hydrocarbon pollutants in drinking water (linearity range 0.4-4 mug 1(-1)). The limits of detection (LD) and quantification (LQ) (mug 1(-1)) are 0.01 and 0.07 for benzo[b]fluoranthene, 0.03 and 0.12 for benzo[a]pyrene and 0.19 and 0.57 for indeno[1,2,3-cd]pyrene in the presence of three other pollutants, benzo[k]fluoranthene, benzo[ghi]perylene and fluoranthene. The precision (RSD /= 85%) were satisfactory.     

Measurement of benzo[a]pyrene,benzo[k]fluoranthene and benzo[g,h,i]perylene by ultraviolet spectroscopy

Microchimica Acta - The technique for determining benzo[a]pyrene, benzo[k]fhuoranthene, and benzo[g,h,i]perylene respectively inμg amounts by UV absorption measurements is described. The...     

Determination of benzo[a]pyrene in shale oil-by solid-surface fluorescence

A method has been developed for determining benzo[a]pyrene in shale oil by combining dry-column chromatography, thin-layer chromatography and fluorescence spectrometry. A two-step separation method was employed to isolate benzo[a]pyrene from shale oil. Benzo[a]pyrene was identified and determined by detecting its fluorescence directly from chromatoplates; as little as 0.06 ng can be detected. The limit of detection of benzo[a]pyrene in shale oil is ca. 1.2 ppm and the reproducibility of the method is ±2.6 ppm.     

Photodynamic action of benzo[a]pyrene in K562 cells

Benzo[a]pyrene (BaP) is ubiquitously distributed in the environment, being considered the most phototoxic element among polycyclic aromatic hydrocarbon (PAHs). In presence of oxygen, PAHs can act as a photosensitizer by means of promoting photo-oxidation of biological molecules (photodynamic action, PDA). Thus, the present study analyzed the photodynamic action of BaP under UVA irradiation (BaP + UVA) and its oxidative effects on K562 cells. The evaluation of BaP kinetics showed that the highest intracellular concentration occurred after 18 h of incubation. Cell viability, reactive oxygen species (ROS) generation, lipid peroxidation, DNA damage (breaks and DNA-protein cross-link [DNAPC]) were assessed after exposure to BaP, UVA and BaP plus UVA irradiation (BaP + UVA). Cell viability was decreased just after exposure to BaP + UVA. Lipid peroxidation and DNA breaks increased after BaP + UVA exposure, while the DNAPC increased after BaP, UVA and BaP + UVA exposure, suggesting that BaP + UVA effects were a consequence of both type II (producing mainly singlet oxygen) and type I (producing others ROS) mechanisms of PDA.     

Light induced interactions of benzo[a]pyrene with carboxylic acids

Abstract The in vitro photochemical behaviour of benzo[a]pyrene (BP) in presence of short and long chain carboxylic acids is studied. The direct irradiation (295–400 or 320–400 nm) of BP in solution in the presence of saturated carboxylic acids destroys more than 70% of this carcinogen in 72 h with a 150 W Xe arc lamp. Consumption of BP alone under similar conditions is less than 10%. The principal product resulting from direct interaction of BP with carboxylic acids is characterized as 6-acyloxybenzo[a]pyrene by means of UV, IR, NMR and mass spectroscopy. The other pathways of destruction may involve polymerization. Saturated fatty acids are shown to favour photoacyloxyation, while unsaturated fatty acids appear to facilitate polymerization of BP. The effect of different factors, such as the carboxylic acid involved, solvent, and wavelength on photoacyloxylation reaction as well as on the consumption of BP is discussed. Photoinduced interaction of BP with carboxylic acids seems to involve radical cation as well as free radicals of the hydrocarbon. Biological properties of BP esters in terms of primary irritancy and carcinogenic activity have also been tested by mouse skin assay. Both long and short chain esters do not show any carcinogenic activity; conversely, long chain esters are shown to be more severe irritants as compared to short chain esters or BP.     

Supersonic jet fluorescence spectrometry of perylene and benzo[a]pyrene

A supersonic jet instrument for fluorescence spectrometry is described. It consists of a high-temperature free expansion nozzle for continuous sample introduction and a vacuum chamber equipped with a high-speed pumping system. Rotationally cooled spectra obtained with the supersonic jet are compared with gas-phase spectra measured at high temperature for perylene and benzo[a]pyrene molecules. Each component of the unresolved band structure in the high-temperature spectra was found to be composed of a rotational congestion of several vibrational bands. For a 1:1 mixture of perylene and benzo[a]pyrene, selective detection is possible by using supersonic jet spectrometry. The detection limit for perylene is 100 ng. The advantage of this technique over other low-temperature spectrometric methods based on Shpol'skii and matrix isolation effects are discussed.     

Metrological traceability for benzo[a]pyrene quantification in airborne particulate matter

Airborne particulate matter (PM) represents one of the most important sources of urban pollution due to its physical and chemical properties. There is a great concern for PM dangerous effects on human health because particles can deeply penetrate into the respiratory system, carrying the contaminants adsorbed onto their surface. Polycyclic aromatic hydrocarbons (PAHs) are a class of organic contaminants that can be adsorbed onto PM and can have harmful effects on health, due to their particular chemical structure. The International Agency for Research on Cancer (IARC) classified PAHs as potential carcinogenic agents and benzo[a]pyrene (BaP) as carcinogenic to humans. In this paper, the development of a metrologically traceable procedure for the quantification of BaP in airborne PM, performed at the Italian National Institute of Metrological Research (Istituto Nazionale di Ricerca Metrologica—I.N.Ri.M.), is presented. The identification and quantification of BaP in PM samples were carried out by gas chromatography coupled with mass spectrometry (GC–MS). Metrological traceability was established in all the procedure steps, after performing the method validation. Suitable certified reference materials (CRMs) were used both to validate the analytical method and to calibrate the GC–MS. The measurement uncertainty was evaluated by identifying and taking into account all the relevant sources deriving from the whole procedure steps.     

Oxidized metabolites from benzo[a]pyrene, benzo[e]pyrene, and aza-benzo[a]pyrenes. A computational study of their carbocations formed by epoxide ring opening reactions

A DFT study aimed at understanding structure-reactivity relationships and fluorine substitution effects on carbocation stability in benzo[a]pyrene (BaP), benzo[e]pyrene (BeP), and aza-benzo[a]pyrene (aza-BaP) derivatives are reported. The relative energies of the resulting carbocations are examined and compared, taking into account the available biological activity data on these compounds. O-Protonation of the epoxides and diol epoxides leads to carbocation formation by barrierless processes. Charge delocalization modes in the resulting carbocations were deduced via NPA-derived changes in charges, and fluorine substitution effects were analyzed on the basis of charge density at different carbocation positions. Thus, fluorine substitution at sites bearing negative charge generated inductive destabilization of the carbocation, whereas a fluorine atom at a ring position which presented significant positive charge density produced a less pronounced destabilization due to fluorine p-pi back-bonding. Protonation reactions were also studied for the azaBaPs. In selected cases, the covalent adducts generated via bond formation with the exocyclic nitrogen of cytosine were computed and relative energies and geometries of the resulting adducts were examined.     

Humic acid-bonded silica as a novel sorbent for solid-phase extraction of benzo[a]pyrene in edible oils

A novel solid-phase extraction (SPE) sorbent, humic acid-bonded silica (HAS), was prepared. Humic acids (HAs) were grafted onto silica matrices via an amide linkage between humyl chloride and the amido terminus of 3-aminopropyltrimethoxysilane (APTS)-silica gel. The resulting material was characterized by Fourier transform infrared spectrometer, elemental analysis, and nitrogen adsorption analysis. This sorbent exhibits an excellent adsorption capacity for some electron-abundant analytes owing to its peculiar structure. In this paper, we choose benzo[a]pyrene (BaP) in oil as a probe to validate the adsorption capacity of the material. Thus a fast, cheap and simple SPE method with humic acid-bonded silica cartridge for edible oil clean-up, followed by high-performance liquid chromatography (HPLC) with fluorescence detection was established. The effects of experimental variables, such as washing and elution solvents, and the amount of sorbents have been studied. The recoveries of BaP in edible oils spiked at 0.2-100 μg kg⁻¹ were in the range of 78.8-102.7% with relative standard deviations ranging between 1.3 and 9.3%; the limit of detection was -0.06 μg kg⁻¹.     

Enrichment of benzo[a]pyrene in vegetable oils and determination by HPLC-FL

We have developed a simple method for the determination of the carcinogen Benzo[a]pyrene (BP) in vegetable oils. The method consists of extraction of the vegetable oil in acetonitrile, concentration to dryness in rotary evaporator and redissolution of the residue in hexane. The purification of the hexane extract was on Sep-Pack Silica Plus cartridges, and the determination of the BP in the isolated extract was by HPLC-FL. Detection and quantification limits were 0.23 and 0.32 μg kg⁻¹ of olive oil, respectively. Recovery (>93%) and RSD (<4%) were satisfactory. When applied to 18 oil samples, BP levels varied from not detected to 1.99 μg kg⁻¹.