Electrochemical sensor for 2,4-dichlorophenoxy acetic acid using molecularly imprinted polypyrrole membrane as recognition element

An electrochemical sensor based on molecularly imprinted polypyrrole membranes is reported for the determination of 2,4-dichlorophenoxy acetic acid (2,4-D). The sensor was prepared by electropolymerization of pyrrole on a glassy carbon electrode in the presence of 2,4-D as a template. The template was removed by overoxidation at +1.3 V in buffer solution. The sensor can effectively improve the reductive properties of 2,4-D and eliminate interferences by other pesticides and electroactive species. The peak current at -0.78 V is linear with the concentration of 2,4-D from 1.0 to 10 µM, the detection limit is 0.83 µM (at 3σ), and the relative standard deviation is 3.9% (at 5.0 µM of 2,4-D; n?=?7). The method has been successfully applied to the determination of 2,4-D in environmental water samples, with recovery rates ranging from 92% to 108%.     

Photodegradation of a herbicide derivative, 2,4-dichlorophenoxy acetic acid in aqueous suspensions of titanium dioxide

The photocatalytic degradation of a herbicide derivative, 2,4-dichlorophenoxy acetic acid (2,4-D, 1), has been investigated in aqueous suspensions of titanium dioxide. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic analysis and decrease in Total Organic Carbon (TOC) content as a function of irradiation time in the presence of UV light source. The degradation kinetics was investigated under a variety of conditions, such as different types of TiO₂, pH, catalyst and substrate concentrations. Higher photonic efficiencies were observed with Degussa P25 as compared with other photocatalysts. The degradation products were analysed by GC-MS and probable pathways for the formation of different products were proposed.     

Photodegradation of a herbicide derivative, 2,4-dichlorophenoxy acetic acid in aqueous suspensions of titanium dioxide

The photocatalytic degradation of a herbicide derivative, 2,4-dichlorophenoxy acetic acid (2,4-D, 1), has been investigated in aqueous suspensions of titanium dioxide. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic analysis and decrease in Total Organic Carbon (TOC) content as a function of irradiation time in the presence of UV light source. The degradation kinetics was investigated under a variety of conditions, such as different types of TiO₂, pH, catalyst and substrate concentrations. Higher photonic efficiencies were observed with Degussa P25 as compared with other photocatalysts. The degradation products were analysed by GC-MS and probable pathways for the formation of different products were proposed.     

Removal of 2,4-Dichloro phenoxy acetic acid pesticide by solvent sublation: Experimental and theoretical studies

The removal of the pesticide 2, 4 D from water using solvent sublation process was investigated in this paper. A lab scale unit was set up and various experimental runs were carried out to study the efficiency of the removal process. The experimental findings show that the method is very effective (>90% removal) in removing traces (ppb level) of the pesticide which is not easily removable by simple air stripping. In addition a mathematical model was developed to describe the experimental findings. Some parameters of the model were measured or calculated while others such as the aqueous mass transfer coefficient and the solute partition coefficient were adjusted to fit the experimental data. The calibration of the model was carried out using the experimental results of change in gas flow rate (the easiest parameter to vary). A numerical sensitivity analysis was carried out using the calibrated model to study the effect of various parameters such as the bubble radius, aqueous phase drag-up by air, column radius and ratio of organic to aqueous volume phases.     

Direct application of gold nanoparticles to one-pot electrochemical biosensors

Gold nanoparticles (AuNPs) have been widely employed for the fabrication of electrochemical biosensors. In most cases, AuNPs are immobilized on the surface of an electrode, so they are difficult to be regenerated, making the use of the biosensor unfriendly. In this work, by adopting AuNPs directly as the electrolytes, we have developed a novel AuNPs-based electrochemical detection system. In brief, AuNPs-catalyzed oxidation of glucose is combined with a HRP-catalyzed reaction as well as an electrocatalytic reaction to compose cascade reactions in the electrolyte. Thus, the intensity of the electrocatalytic signals has quantitative relation with the concentration of glucose, and favors the sensitive detection of glucose. Furthermore, because the catalysis of AuNPs may be blocked under the interaction with single-stranded DNA and unblocked in the presence of a complementary sequence, detection of DNA and even single-nucleotide polymorphism can thereby been achieved. This one-pot detection system can be operated and regenerated very easily, since all the components are integrated in the electrolytes of AuNPs, and the unmodified electrode can be reused after being rinsed. This concept by integrating the advantages of sensitive electrochemical detection with the easy-to-operate nanocolloidal system may also promote the development of other kinds of electrochemical biosensors.     

Effect of surface modification of an engineered activated carbon on the sorption of 2,4-dichlorophenoxy acetic acid and benazolin from water

The performance of a conventional (F400) and a surface modified activated carbon (F400AN) has been investigated for the sorption of benazolin and 2,4-dichlorophenoxy acetic acid (2,4-D) from water. It was observed that the modified carbon, F400AN, which was obtained by annealing the conventional sample had a higher BET surface area (960 m2 g(-1) compared to 790 m2 g(-1)) and it had a higher proportion of micropores. This was attributed to the loss of oxygen containing functional groups during the thermal treatment. Zeta potential and pH titration measurements also showed that acidic functionality had been lost on the F400AN sample. The adsorption data were analysed and were fitted well using the Langmuir isotherm. The modified carbon marginally out-performed the conventional activated carbon for sorption of these two herbicides. Thermodynamic parameters (DeltaG0, DeltaH0, and DeltaS0) were determined and their values indicated that the sorption process was spontaneous and endothermic for both herbicides. A pseudo-second-order kinetic model was employed for analysing the kinetic data. It was concluded that the herbicide sorption process was controlled by a film diffusion mechanism.     

Gas-liquid chromatography and gas-liquid chromatography combined with mass spectrometry of a butyl ester formulation of (2,4-dichlorophenoxy) acetic acid.

A method is presented for the analysis of (2,4-dichlorophenoxy)acetic acid (2,4-D) in commercial formulations, together with concurrent detection and quantitation of related compounds. The method is based on direct gas-liquid chromatographic (GLC) analysis of the formulation to estimate the various esters present, and on an analysis of the total 2,4-D present involving a prior cleanup, alkaline hydrolysis, acidification and n-butylation steps. This procedure also quantitates any other related acids or phenols present. A step which would extract dioxin impurities is also included. The method was checked by the accepted acid-base estimation of 2,4-D content, GLC, and by subjecting radioactive-labelled herbicide to the above procedures.     

壳聚糖-二茂铁复合物的制备及其在电化学传感器上的应用

壳聚糖-二茂铁复合物(CHIT-Fc)由二茂铁羧酸的羧基和脱乙酰壳多糖的羟基缩合合成,并通过红外光谱检测.合成得到的壳聚糖-二茂铁复合物通过物理吸附作为固定胆固醇氧化酶(CHOx)的基体.同时,使用Nafion稀释液可以消除诸如抗坏血酸和尿酸的影响.最佳测试条件下,采用示差脉冲(DPV)研究胆固醇生物传感器的响应,在4.0×10-6mol/L～1.0×10-4 mol/L范围内,氧化峰电流与胆固醇浓度呈现良好的线性关系,线性方程为Ipa=0.0223c-0.0875(Ipa:μA,c:μmol/L,R=0.9982),检测限为5.0×10-7mol/L(S/N=3).     

Dual-opposite-injection CZE: theoretical aspects and application to organic and pharmaceutical compounds

Several important figures of merit (migration time, efficiency, resolution, resolution per unit time, and electrophoretic selectivity) are quantitatively compared for the first time for conventional CZE and dual-opposite-injection CZE (DOI-CZE). Aspects of DOI-CZE relevant to the separation of organic and pharmaceutical ions (MW>120 Da) are also discussed. Two new approaches to resolve the codetection of anions and cations, hydrodynamic flow-modified DOI-CZE and polarity reversal in combination with asymmetric detector window positioning, are compared with the method of preliminary transport, a variable procedure within sequential sample introduction, using a six-component sample of organic and pharmaceutical compounds. The advantages of DOI-CZE for the simultaneous analysis of organic/pharmaceutical anions and cations are illustrated in a direct comparison of conventional CZE and DOI-CZE for the separation of a ten-component mixture of pharmaceutical ions (five ionized acids and five ionized bases).     

Ni(II) and Co(II) complexes with 2,4-dichlorophenoxyacetic acid and 2-(2,4-dichlorophenoxy)-propionic acid

Nickel(II) and cobalt(II) complexes with the commercial herbicides 2,4-dichlorophenoxyacetic acid (2,4D; C₈H₆O₃Cl₂) and 2-(2,4-dichlorophenoxy)-propionic acid (2,4DP; C₉H₈O₃Cl₂) were prepared and characterized. On the basis of the results of elemental analysis and Ni and Co determination, the following molecular formulae were proposed for the obtained compounds: Ni(C₈H₅O₃Cl₂)₂·6H₂O, Co(C₈H₅O₃Cl₂)₂·6H₂O, Ni(C₉H₇O₃Cl₂)₂·2H₂O and Co(C₉H₇O₃Cl₂)₂·2H₂O. X-ray powder analysis was carried out. The IR, electronic (VIS) spectra and conductivity data were discussed. Water solubility of the synthesized complexes at room temperature was examined. Thermal decomposition of the compounds was studied. Dehydration processes occur during heating in air. The anhydrous compounds decompose via different intermediate products to oxides. TG/MS studies indicate formation of gaseous mass fragments of decomposition including H₂O⁺, OH⁺, CO₂ ⁺, HCl⁺, Cl₂ ⁺, CH₃Cl⁺, CH₂O⁺, C₆H₆ ⁺ and other. This revised version was published online in August 2006 with corrections to the Cover Date.     

Lead(II) and cadmium(II) compounds with 2,4-dichlorophenoxyacetic acid (2,4D) and 2-(2,4-dichlorophenoxy)-propionic acid (2,4DP): Synthesis and properties

The paper presents the conditions under which compounds of the commercial herbicides, 2,4-dichlorophenoxyacetic acid (2,4D; C₈H₆O₃Cl₂) and 2-(2,4-dichlorophenoxy)-propionic acid (2,4DP; C₉H₈O₃Cl₂), with lead(II) and cadmium(II) are formed and the results of the examination of their properties.On the basis of the elemental analysis and Pb and Cd determination, the following molecular formulae for the obtained compounds were proposed: Pb(C₈H₅O₃Cl₂)₂.H₂O, Cd(C₈H₅O₃Cl₂)₂.₂H₂O, Pb(C₉H₇O₃Cl₂)2·H₂O and Cd(C₉H₇O₃Cl₂)₂·H₂O. Water solubility of the synthesized complexes at room temperature was examined. X-ray powder analysis was carried out. The discussion of IR spectra and conductivity data is presented. Thermal decomposition of these compounds in air was studied by TG/MS methods.This revised version was published online in November 2005 with corrections to the Cover Date.     

Rapid and simultaneous analysis of dichlorvos, malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid in citrus fruit by flow-injection ion spray ionization tandem mass spectrometry

A simple method for the rapid and simultaneous analysis of dichlorvos (DDVP), malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid (2,4-D) in citrus fruit, which uses flow-injection ion spray ionization tandem mass spectrometry, has been developed for the first time. The method involves the combined use of stable isotopically labeled internal standards (DDVP-d₆, malathion-d₁₀, carbaryl-d₇, and 2,4-D-d₅) and a multiple reaction monitoring technique. The average recoveries for the pesticides at the same concentrations as their tolerance levels (DDVP: 0.1-0.2 μg g⁻¹; malathion: 0.5-4.0 μg g⁻¹; carbaryl: 1.0 μg g⁻¹; 2,4-D: 1.0-2.0 μg g⁻¹) ranged from 90 to 119% with the relative standard deviation (R.S.D.) ranging from 1.0 to 13.1% (n = 5). Analysis time, including sample preparation and determination, was only 15 min. The present method is effective for screening DDVP, malathion, carbaryl, and 2,4-D in citrus fruit.     

High sensitive competitive immunodetection of 2,4-dichlorophenoxyacetic acid using enzymatic amplification with electrochemical detection

The amplification cycle consisting of NADH independent oligosaccharide dehydrogenase (ODH) and laccase has been recently reported to be highly sensitive to several catecholamines and p-aminophenol. A competitive immunoassay for 2,4-dichlorophenoxyacetic acid has been developed by combining this amplification cycle with β-galactosidase as enzyme label resulting in p-aminophenol as product. The combination of enzymatic amplification cycles with a competitive immunoassay yields a highly sensitive measurement of 2,4-dichlorophenoxyacetic acid. Using a monoclonal antibody the linear range of the assay was between 0.02 and 100 ng/l and the c₅₀ was found at 0.2 ng/l; the detection limit was at 5 pg/l (25 fmol/l) corresponding to 5 amol.     

High sensitive competitive immunodetection of 2,4-dichlorophenoxyacetic acid using enzymatic amplification with electrochemical detection

The amplification cycle consisting of NADH independent oligosaccharide dehydrogenase (ODH) and laccase has been recently reported to be highly sensitive to several catecholamines and p-aminophenol. A competitive immunoassay for 2,4-dichlorophenoxyacetic acid has been developed by combining this amplification cycle with -galactosidase as enzyme label resulting in p-aminophenol as product. The combination of enzymatic amplification cycles with a competitive immunoassay yields a highly sensitive measurement of 2,4-dichlorophenoxyacetic acid. Using a monoclonal antibody the linear range of the assay was between 0.02 and 100 ng/l and the c₅₀ was found at 0.2 ng/l; the detection limit was at 5 pg/l (25 fmol/l) corresponding to 5 amol.     

Extracellular vesicles based electrochemical biosensors for detection of cancer cells: A review

Extracellular vesicles (EVs) derived from cancer cells are considered as ideal biomarker for liquid biopsy in cancer diagnosis, and are stable and abundant. Electrochemical methods for the detection of EVs are preferred over conventional methods such as Western blotting and enzyme-linked immunosorbent assay for their high sensitivity and real-time detection. This article summaries studies proposing the electrochemical methods utilizing immunological and molecular methodologies for detecting EVs derived biomacromolecules such as miRNAs and transmembrane protein for cancer diagnosis. Moreover, the electrochemical detection methods are compared and future prospects for the development of electrochemical methods for EVs detection are concluded.     

Silica-based electrochemical sensors and biosensors: Recent trends

1. Download : Download high-res image (218KB)
2. Download : Download full-size image

     

Design and application of a flow cell for carbon-film based electrochemical enzyme biosensors

A flow cell has been designed for use with an electrochemical enzyme biosensor, based on low-cost carbon-film electrodes. Three types of mediators were used: cobalt and copper hexacyanoferrates and poly(neutral red) (PNR), covered with glucose oxidase (GOx) immobilised by cross-linking with glutaraldehyde in the presence of bovine serum albumin or inside a oxysilane sol–gel network. Mixtures of sol–gel precursors were made from 3-aminopropyl-triethoxysilane (APTOS) together with methyltrimethoxysilane (MTMOS), methyltriethoxysilane (MTEOS), tetraethyloxysilane (TEOS) or 3-glycidoxypropyl-trimethoxysilane (GOPMOS), and the best chosen for encapsulation. Optimisation in batch mode, using amperometric detection at fixed potential, showed the PNR-GOx modified carbon-film electrodes to be best for flow analysis for both glutaraldehyde and sol–gel enzyme immobilisation. Both types of enzyme electrode were tested under flow conditions and the reproducibility and stability of the biosensors were evaluated. The biosensors were used for fermentation monitoring of glucose in grape must and interference studies were also performed.     

Interaction between methyl glyoxal and ascorbic acid: experimental and theoretical aspects

The absorption spectral change of methyl glyoxal (MG) due to the interaction with ascorbic acid (AA or Vitamin C) has been investigated using steady-state spectroscopic technique. A plausible explanation for the spectral change has been discussed on the basis of hydrogen bonding interaction between the two interacting species. The equilibrium constant for the complex formation due to hydrogen bonding interaction between MG and AA has been obtained from absorption spectral changes. Ab inito calculations with DFT B3LYP/6/31G (d,p) basis sets have been used to find out the molecular structure of the hydrogen bonded complex. The O...H distance found in the O-H...O hydrogen bond turns out to be quite short (1.974 A) which is in conformity with the large value of the equilibrium constant determined experimentally.     

Amperometric detection with microelectrodes in flow injection analysis: theoretical aspects and application in the determination of nitrite in saliva

The construction of a wall-jet cell with amperometric detection using a set of disc electrodes whose radii ranged from 5 to 750 mum has been proposed. The influence of some experimental parameters like flow rate and electrode radius on hydrodynamic voltammograms recorded for a 0.5 mmol dm(-3) potassium ferrocyanide solution also containing 0.1 mol dm(-3) KCl has been discussed. Some considerations regarding the current signals obtained from flow injection experiments using both a 5- and a 750-mum radius platinum electrode were carried out in order to achieve the lowest limit of detection, a value of 0.03 mumol dm(-3) ferrocyanide being calculated by using the 5-mum radius microelectrode as amperometric detector. The wall-jet cell has been used in the determination of nitrite in saliva by quantifying the triiodide formed in the reaction of the analyte with excess iodide in acidic medium. A 12.5-mum platinum disc microelectrode maintained at +0.2 V vs. Ag/AgCl was used as amperometric detector. Peaks obtained in fiagrams after injection of diluted saliva to the carrier stream containing 0.1 mol dm(-3) sulphuric acid and 20 mmol dm(-3) potassium iodide were compared to an analytical curve obtained in the same conditions (r(2)=0.997) for a nitrite concentration in the range 1-10 mumol dm(-3). The concentration of nitrite in the saliva sample after the appropriate correction for dilution was found to be 2.3 ppm (0.05 mmol dm(-3)), in a good agreement with results obtained by using a standard spectrophotometric procedure (2.5 ppm). The limit of detection of the method was calculated as 0.2 mumol dm(-3), and the reproducibility was checked by measuring the peak current for 19 injections of 10 muM nitrite, the standard deviation being 3.7%.