Trends in Fourier transform infrared spectroscopic imaging

Fourier transform infrared (FTIR) spectroscopic imaging is a relatively new method that has received great attention as a new field of analytical chemistry. The greatest benefit of this technique lies in the high molecular sensitivity combined with a spatial resolution down to a few micrometers. Another advantage is the ability to probe samples under native conditions, which allows new insights into samples without the need for fixation, stains, or an additional marker. Advances in instrumentation have made FTIR spectroscopic imaging the tool of choice for an increasing number of applications. The main applications are in the bioanalytical chemistry of cells and tissue, polymers, and recently as well as in homeland security. This report gives a short overview of current developments and recent applications. Figure FTIR image of a polymer blend reveals the chemical composition. Online Abstract Figure (365 KB).     

Detection of trace materials with Fourier transform infrared spectroscopy using a multi-channel detector

FTIR spectroscopy is one of the most powerful methods for material characterization. However, the sensitivity of this analytical tool is often very limited especially for materials with weak infrared absorption or when spectral bands of the targeted trace material overlap with the spectral bands of major components. Fortunately, for heterogeneous samples, there is an opportunity to improve the sensitivity of detection by using an imaging approach. This paper explores the opportunity of enhancing the sensitivity of FTIR spectroscopy to detect trace amounts of materials using the FTIR imaging approach based on a focal plane array (FPA) detector. Model sample tablets of ibuprofen in hydroxypropyl methylcellulose (HPMC) have been used to exemplify the detection limits of FTIR spectroscopy using: (a) a conventional mercury cadmium telluride (MCT) detector and (b) a FPA detector. The sensitivity level was compared and it has been found that for this particular set of samples, the lowest concentration of ibuprofen in HPMC that can be detected using attenuated total reflection (ATR) measuring mode with the single element MCT detector was 0.35 wt% while using the FPA detector, the presence of drug has been detected in a sample that contains as little as 0.075 wt% of drug. The application of using this enhanced sensitivity offered by the multi-channel detector to probe trace amounts of drug particles left on the surface of a finger after handling a small amount of the drug has also been demonstrated. These results have broad implications for forensic, biomedical and pharmaceutical research.     

The study of a single BGC823 cell using Fourier transform infrared microspectroscopic imaging

In order to investigate gastric cancer at cellular and sub-cellular level, a single human gastric adenocarcinoma BGC823 cell was studied by an infrared microscope equipped with a focal plane array (FPA) detector. The spectra showed difference between the nucleus and the endoplasmic reticulum (ER) of the BGC823 cell. The peak of vasPO2- was shifted to a higher wavenumber at the nucleus compared with that at the ER. The height ratios of 2954 cm(-1)/2922 cm(-1) (CH3/CH2) and 1088 cm(-1)/1539 cm(-1) (DNA/amide II) of the nucleus were significantly higher than those of the ER. Furthermore, chemical images reveal the intensity distributions of lipids, proteins and DNA of the single BGC823 cell, and the intense absorptions of proteins and DNA were observed in the nuclear region of the cell while the intense absorption of lipids was found in the ER region of the cell. The Fourier transform infrared (FTIR) microspectroscopic imaging result indicates the study of the single gastric cancer cell at sub-cellular level can be beneficial for knowing gastric cancer more which will be of great importance for the study and diagnosis of gastric cancer. The result also suggests that FPA is a useful tool in the study of a single cell and may be a powerful tool for study and diagnosis of gastric cancer.     

Fourier transform raman spectroscopy using a bench-top fourier transform infrared spectrometer

The use of a bench top FTIR spectrometer for near infrared Fourier transform Raman spectroscopy is demonstrated. The use of near infrared excitation results in fluorescence free Raman spectra allowing previously difficult samples to be measured.     

Nature of water in nacre: a 2D Fourier transform infrared spectroscopic study

In this work, the interactions of aragonite and organic matrix in nacre with water are investigated using two-dimensional (2D) Fourier transform infrared (FTIR) spectroscopy. The 2D-FTIR analysis revealed four bands in the OH stretching region at around 3550, 3445, 3272 and 3074 cm(-1). Two additional bands were found at around 3616 and 3282 cm(-1) after deconvolution of the nacre spectrum. The bands at around 3616 and 3550 cm(-1) are assigned to asymmetric and symmetric OH stretching of partially hydrogen bonded water molecules. The bands at around 3445 and 3272 cm(-1) are assigned to asymmetric and symmetric OH stretching of water molecules fully hydrogen bonded with surrounding water molecules. Presence of above bands in the nacre spectrum suggests that water, in form of clusters, is present in protein matrix and aragonite pores. Water may also hydrogen bond with the organic matrix. The bands observed at 3282 and 3074 cm(-1) are assigned to asymmetric and symmetric OH stretching of water molecules, chemisorbed on surfaces of aragonite platelets. Polarization experiments suggest that H-O-H plane of water molecules is along to c-axis of aragonite platelets.     

Combined Fourier transform infrared and Raman spectroscopic studies of some carbonyl-diphosphine-indenyl-iron cations

The Fourier transform infrared and Raman spectra of the cations [η⁵-C₉H₇Fe(CO)_n dppa]⁺ (n = 1, 2; dppa=bisdiphenylphosphinoalkane, where alkane=methane, ethane, butane, hexane and octane) and [{η⁵-C₉H₇Fe(CO)₂}₂-μ-dppa]²⁺ indicate that the alkyl chain lengths have effects on the structures of the bidentate cations resulting in increased back-donation to carbonyl groups as the chain length increases. In contrast the alkyl chain lengths have no similar effects in the unidentate mononuclear and bridged cations.     

Fourier transform infrared spectroscopic determination of cypermethrin and deltamethrin in emulsifiable concentrate formulations

Fourier tranform infrared (FT-IR) spectroscopic method has been developed for determination of cypermethrin and deltamethrin in emulsifiable concentrate formulations. The known concentration of formulation was subjected to preparative thin layer chromatography and the active ingradient zone was scrapped from the plate. Pyrethroids were eluted from the adsorbent with chloroform and estimated by measuring the ester carbonyl absorption band at 1749 cm(-1) in cypermethrin and at 1743 cm(-1) in deltamethrin using base line technique. Recoveries of cypermethrin and deltamethrin from commercial and laboratory prepared formulations were 90 to 97% in both the cases. The validity of FT-IR method was confirmed by comparing the results with standard HPLC method.     

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

Micellar electrokinetic capillary chromatography was developed to analyze plant hormones including gibberellic acid, abscisic acid, indole-3-acetic acid, alpha-naphthaleneacetic acid, 2,4-dichlorophenoxyacetic acid, kinetin-6-furfurylaminopurine and N6-benzyladenine. The influences of some crucial parameters including buffer concentration, pH value, micelle concentration and applied voltage on electrophoretic separation were investigated. Under optimum conditions (50 mM borate as the running buffer containing 50 mM sodium dodecylsulfate, pH 8.0; separation voltage: -15 kV; injection: hydrodynamic injection, 5 s at 50 mbar; temperature: 25 degrees C), a complete separation of seven plant hormones was accomplished within 30 min. Emphasis was placed on improving detection sensitivity in order to detect small amounts of hormones in plant tissue. Multiple wavelength detection and expanded bubble cell capillary were used with enrichment factors of 2 and 3, respectively. In addition, an on-line concentration method of large volume sample stacking was designed. Enrichment factors of up to approximately 10-600 were achieved for these hormones with detection limits down to 0.306 ng/ml. The method was successfully applied to analyzing abscisic acid in flowers of transgenic tobacco.     

Fourier transform infrared imaging for high-throughput analysis of pharmaceutical formulations

Fourier transform infrared (FTIR) spectroscopic imaging with infrared array detectors has recently emerged as a powerful materials characterization tool. We report a novel application of FTIR imaging for high-throughput analysis of materials under controlled environment. This approach combines the use of spectroscopic imaging with an attenuated total reflection (ATR)-IR cell, microdroplet sample deposition system, and a device that controls humidity inside the cell. By this approach, it was possible to obtain "chemical snapshots" from a spatially defined array of many different polymer/drug formulations (more than 100) under identical conditions. This method provides direct measurement of materials properties for high-throughput formulation design and optimization. Simultaneous response (water sorption, crystallization, etc.) of the array of formulations to the environmental parameters was studied. Implications of the presented approach range from studies of smart polymeric materials and sensors to screening of pharmaceuticals and biomaterials.     

Towards a practical Fourier transform infrared chemical imaging protocol for cancer histopathology

Fourier transform infrared (FTIR) chemical imaging is a strongly emerging technology that is being increasingly applied to examine tissues in a high-throughput manner. The resulting data quality and quantity have permitted several groups to provide evidence for applicability to cancer pathology. It is critical to understand, however, that an integrated approach with optimal data acquisition, classification, and validation is necessary to realize practical protocols that can be translated to the clinic. Here, we first review the development of technology relevant to clinical translation of FTIR imaging for cancer pathology. The role of each component in this approach is discussed separately by quantitative analysis of the effects of changing parameters on the classification results. We focus on the histology of prostate tissue to illustrate factors in developing a practical protocol for automated histopathology. Next, we demonstrate how these protocols can be used to analyze the effect of experimental parameters on prediction accuracy by analyzing the effects of varying spatial resolution, spectral resolution, and signal to noise ratio. Classification accuracy is shown to depend on the signal to noise ratio of recorded data, while depending only weakly on spectral resolution.     

傅里叶变换近红外光谱法快速检测人血清生化成分

应用傅里叶变换近红外光谱透射技术结合偏最小二乘法(PLS)建立了人血清中7种生化成分的定标模型,利用内部交叉验证和自动优化功能对定标模型进行了优化,确定了最优建模参数。模型对人血清中总胆固醇、甘油三酯、总蛋白、白蛋白、载脂蛋白B、低密度脂蛋白胆固醇、葡萄糖定标样品集的预测值与化学值的相关系数r分别为0.9011、0.9593、0.9249、0.761、0.8831、0.5191、0 9148,预测校正标准误差RMSECV分别为15mg/dL,21.6mg/dL,2 66g/L,3 96g/L,0.091g/L,16.2mg/dL,0.49mmol/L。     

Photochemical study of anthracene crystallites by Fourier transform spectroscopic imaging.

Fourier transform-based spectroscopic imaging was used for direct, time-resolved, analysis of UV-irradiated anthracene crystallites. Well-resolved fluorescence spectra were obtained at a spatial resolution of 1 microm. The appearance of such photochemical by-products as dianthracene and anthraquinone was monitored throughout the irradiation experiments. Under deaerated conditions, photolysis of anthracene was accompanied by formation of dianthracene. When performed under aerated conditions, however, the spectral data indicated formation of both dianthracene and anthraquinone. Spectral features obtained for the directly monitored photolysis of anthracene are discussed in respect to the structural and compositional modifications in such crystallites. Capabilities of the spectral imaging device for the quantification of the photochemical products of anthracene are discussed.     

Single-drop micro-extraction and diffuse reflectance Fourier transform infrared spectroscopic determination of chromium in biological fluids

The present paper deals with a new micro-extraction procedure for selective separation of Cr(VI) in the form of a metaloxy anionic species namely dichromate (Cr₂O₇²⁻) with N¹-hydroxy-N¹,N²-diphenylbenzamidine (HOA) in to dichloromethane and its subsequent and rapid diffuse reflectance Fourier transform infrared spectroscopic (DRS-FTIR) determination employing potassium bromide matrix. The diffuse reflectance Fourier transform infrared spectroscopy gives both qualitative and quantitative information about the dichromate. The determination of chromium is based on the analytical peak selection, among the various vibrational peaks, at 902 cm⁻¹. The micro-extraction was based on the liquid-liquid solvent extraction (LLSE) principle. The dichromate binds with the nitrogen and oxygen atoms of N¹-hydroxy-N¹,N²-diphenylbenzamidine (HOA) and forms 1:2, Cr(VI):HOA complex in 0.1 mol L⁻¹ HCl medium. The formation of above complex, in the acidic medium, is confirmed by the appearance of chocolate-brown color in the micro-extract. The speciation studies of Cr(III) and Cr(VI) is done by conversion of Cr(III) into Cr(VI) utilizing H₂O₂ as an oxidizing agent. The chemistry of pure dichromate and that of its HOA complex is discussed. The limit of detection (LoD) and the limit of quantification (LoQ) of the method are found to be 0.01 μg g⁻¹ Cr₂O₇²⁻ and 0.05 μg g⁻¹ Cr₂O₇²⁻, respectively. The standard deviation value and the relative standard value at a level of 10 μg Cr₂O₇²⁻/0.1 g KBr for n = 10 is found to be 0.26 μg Cr₂O₇²⁻ and 2.6%, respectively. The relative standard deviation (n = 8 and 6) for the determination of dichromate (Cr₂O₇²⁻) in real human biological fluid samples is observed to be in the range 3.1-7.8%.     

A Fourier transform infrared spectroscopic study of Mg-rich, Mg-poor and acid leached palygorskites

The FTIR spectra of pure magnesium-rich (Mg-rich) and magnesium-poor (Mg-poor) palygorskites, before and after short-term (<7 h) and long-term (360 h) acid leaching are presented here. Comparison of decomposition spectra of Mg-rich and Mg-poor palygorskites clearly shows that the absorption peaks related to pairs of octahedral cation differ depending on the octahedral site occupancy. Short-term acid leaching of palygorskites results in significant changes to FTIR absorption bands near 1200 and 790 cm-1. As the acid attack progresses, the band at 1200 cm-1 shifts to lower wavenumbers, whilst the band at 790 cm-1, which here is assigned to SiU-O-SiD symmetrical stretching vibration, shifts to higher wavelengths. Longer-term leaching of palygorskites results in the disappearance of 900-1200 cm-1 absorption bands, showing that the palygorskite has largely decomposed to amorphous silica. Assignments of several other bands have been made as follows: several vibrations relate to OH, i.e. 847 cm-1, hygroscopic water (1635 cm-1), Si-O vibrations 1100, 611-621, 470-481 cm-1, etc. appear in the FTIR spectra of 360 h acid leached palygorskite. Three bands near 1100, 611-621 and 470-481 cm-1 relate to Si-O vibration of an ideal hexagonal (Si2O5)n sheet.     

Fourier transform infrared imaging analysis in discrimination studies of squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) of the oral cavity and oropharynx represents more than 95% of all malignant neoplasms in the oral cavity. Histomorphological evaluation of this cancer type is invasive and remains a time consuming and subjective technique. Therefore, novel approaches for histological recognition are necessary to identify malignancy at an early stage. Fourier transform infrared (FTIR) imaging has become an essential tool for the detection and characterization of the molecular components of biological processes, such as those responsible for the dynamic properties of tumor progression. FTIR imaging is a modern analytical technique enabling molecular imaging of a complex biological sample and is based on the absorption of IR radiation by vibrational transitions in covalent bonds. One major advantage of this technique is the acquisition of local molecular expression profiles, while maintaining the topographic integrity of the tissue and avoiding time-consuming extraction, purification, and separation steps. With this imaging technique, it is possible to obtain unique images of the spatial distribution of proteins, lipids, carbohydrates, cholesterols, nucleic acids, phospholipids, and small molecules with high spatial resolution. Analysis and visualization of FTIR imaging datasets are challenging and the use of chemometric tools is crucial in order to take advantage of the full measurement. Therefore, methodologies for this task based on the novel developed algorithm for multivariate image analysis (MIA) are often necessary. In the present study, FTIR imaging and data analysis methods were combined to optimize the tissue measurement mode after deparaffinization and subsequent data evaluation (univariate analysis and MIAs). We demonstrate that it is possible to collect excellent IR spectra from formalin-fixed paraffin-embedded (FFPE) tissue microarrays (TMAs) of OSCC tissue sections employing an optimised analytical protocol. The correlation of FTIR imaging to the morphological tissue features obtained by histological staining of the sections demonstrated that many histomorphological tissue patterns can be visualized in the colour images. The different algorithms used for MIAs of FTIR imaging data dramatically increased the information content of the IR images from squamous cell tissue sections. These findings indicate that intra-operative and surgical specimens of squamous cell carcinoma tissue can be characterized by FTIR imaging.     

Fourier transform infrared spectroscopic study of water-in-supercritical CO2 microemulsion as a function of water content

Fourier transform infrared (FT-IR) spectrum of water-in-supercritical CO(2) microemulsion was measured at 60 degrees C and 30.0 MPa over a wide range of water/CO(2) ratio from 0.0 to 1.2 wt % to study the distribution of water into CO(2), interfacial area around surfactant headgroup, and core water pool. The microemulsion was stabilized by sodium bis(1H,1H,2H, 2H-heptadecafluorodecyl)-2-sulfosuccinate [8FS(EO)(2)] equimolarly mixed with sodium 1-oxo-1-[4-(tridecafluorohexyl)phenyl]-2-hexanesulfonate [FC6HC4] or with poly(ethylene glycol) 2,6,8-trimethyl-4-nonyl ether [TMN-6]. The signal area of the O-H stretching band of water suggested that the number of water molecules in the microemulsion increases linearly with the water/CO(2) ratio, except for a slow initial increase below 0.4 wt % due to a part of water dissolved in CO(2). The amount of water in CO(2) was evaluated by decomposing the bending band of water into two components, one at lower frequency ascribed to water in CO(2) and the other at higher frequency to water in the microemulsion. The decomposition confirmed that CO(2) is saturated with water at the water content of 0.4 wt %. It was also revealed, from the symmetric SO stretching frequency of the surfactant, that the sulfonate headgroup is completely hydrated at the water/CO(2) ratio of 0.4-0.5 wt %. The results demonstrated that water is introduced preferentially into CO(2) and the interfacial area at small water content, and then is loaded into the micelle core after the saturation of CO(2) with water and the full hydration of the surfactant headgroup.     

Fourier transform infrared spectroscopic study of the photocatalytic degradation of cancerous cells on titanium dioxide

The method of attenuated total internal reflection Fourier transform IR spectroscopy has been used to study the oxidation kinetics of the biomolecular components of the eukaryotic cancerous HeLa cells initiated by the photogenerated charges on TiO₂. It was shown that the organic material of the cells on the porous film of the TiO₂ nanoparticles was mineralized in a such way that the TiO₂ surface was purified. The basic organic groups of Amide-I, Amide-II and phosphate were oxidized at different rates. Amide-II oxidized most rapidly, then followed Amide-I. The phosphate was the most resistant to oxidation.     

Characterization of porcine skin as a model for human skin studies using infrared spectroscopic imaging

Porcine skin is often considered a substitute for human skin based on morphological and functional data, for example, for transdermal drug diffusion studies. A chemical, structural and temporal characterization of porcine skin in comparison to human skin is not available but will likely improve our understanding of this porcine skin model. Here, we employ Fourier transform infrared (FT-IR) spectroscopic imaging to holistically measure chemical species as well as spatial structure as a function of time to characterize porcine skin as a model for human skin. Porcine skin was found to resemble human skin spectroscopically and differences are elucidated. Cryo-prepared fresh porcine skin samples for spectroscopic imaging were found to be stable over time and small variations are observed. Hence, we extended characterization to the use of this model for dynamic processes. In particular, the capacity and stability of this model in transdermal diffusion is examined. The results indicate that porcine skin is likely to be an attractive tool for studying diffusion dynamics of materials in human skin.     

Fourier transform infrared spectroscopic approach to the study of the secondary cell wall development in cotton fiber

Cotton fiber maturity is a major yield component and an important fiber quality trait that is directly linked to the quantity of cellulose deposited during the secondary cell wall (SCW) biogenesis. Cotton fiber development consists of five major overlapping stages: differentiation, initiation, polar elongation, secondary cell wall development, and maturation. The transition period between 16 and 21 dpa (days post anthesis) is regarded to represent a major developmental stage between the primary cell wall and the SCW. Fourier Transform Infrared spectroscopy was used to investigate the structural changes that occur during the different developmental stages. The IR spectra of fibers harvested at different stages of development (10, 14, 17, 18, 19, 20, 21, 24, 27, 30, 36, 46, and 56 dpa) show the presence of vibrations located at 1,733 cm⁻¹ (C=O stretching originating from esters or amides) and 1,534 cm⁻¹ (NH₂ deformation corresponding to proteins or amino acids). The results converge towards the conclusion that the transition phase between the primary cell wall and the secondary cell wall occurs between 17 and 18 dpa in fibers from TX19 cultivar, while this transition occurs between 21 and 24 dpa in fibers from TX55 cultivar.     

Fourier transform infrared spectroscopic and theoretical study of water interactions with glycine and its N-methylated derivatives

In this study we attempt to explain the molecular aspects of amino acids' hydration. Glycine and its N-methylated derivatives: N-methylglycine, N,N-dimethylglycine, and N,N,N-trimethylglycine were used as model solutes in aqueous solution, applying FT-IR spectroscopy as the experimental method. The quantitative version of the difference spectra method enabled us to obtain the solute-affected HDO spectra as probes of influenced water. The spectral results were confronted with density functional theory calculated structures of small hydration complexes of the solutes using the polarizable continuum model. It appears that the hydration of amino acids in the zwitterionic form can be understood allowing a synchronized fluctuation of hydrogen bonding between the solute and the water molecules. This effect is caused by a noncooperative interaction of water molecules with electrophilic groups of amino acid and by intramolecular hydrogen bond, allowing proton transfer from the carboxylic to the amine group, accomplishing by the chain of two to four water molecules. As a result, an instantaneous water-induced asymmetry of the carboxylate and the amino group of amino acid molecule is observed and recorded as HDO band splitting. Water molecules interacting with the carboxylate group give component bands at 2543 ± 11 and 2467 ± 15 cm(-1), whereas water molecules interacting with protons of the amine group give rise to the bands at 2611 ± 15 and 2413 ± 12 cm(-1). These hydration effects have not been recognized before and there are reasons to expect their validity for other amino acids.