Electrochemical deposition and characterization of mixed-valent rhenium oxide films prepared from a perrhenate solution

Cathodic electrodeposition of mixed-valent rhenium oxides at indium tin oxide, gold, rhenium, and glassy carbon electrodes from acidic perrhenate solutions (pH = 1.5 +/- 0.1) prepared from hydrogen peroxide and zerovalent rhenium metal is described. Cyclic voltammetry, variable angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), UV-vis spectroelectrochemistry, and electrochemical quartz crystal microbalance (EQCM) data indicate that the chemical nature of the electrodeposited rhenium species depends mainly upon the potential and supporting electrolyte. The presence of SO4(2-) as a supporting electrolyte inhibits the adsorption of perrhenate, ReO4-, at non-hydrogen adsorbing electrode materials. However, in acidic perrhenate solutions containing only protons and ReO4- anions, strong adsorption of ReO4- at potentials preceding hydrogen evolution occurs. This leads to the formation of an unstable ReIII2O3 intermediate which catalytically disproportionates to form mixed-valent rhenium films consisting of 72% ReIVO2 and 28% Re0. During the hydrogen evolution reaction (HER), hydrogen polarization causes the principle deposit to be more reduced, consisting of roughly 64% ReIVO2 and 36% Re0. Conclusively, metallic rhenium can be deposited at potentials preceding the HER at non-hydrogen adsorbing electrode materials, especially in the absence of SO4(2-) anions.     

Oxidation of symmetric disulfides with hydrogen peroxide catalyzed by Methyltrioxorhenium(VII)

Organic disulfides with both alkyl and aryl substituents are oxidized by hydrogen peroxide when CH(3)ReO(3) (MTO) is used as a catalyst. The first step of the reaction is complete usually in about an hour, at which point the thiosulfinate, RS(O)SR, can be detected in nearly quantitative yield. The thiosulfinate is then converted, also by MTO-catalyzed oxidation under these conditions, to the thiosulfonate and, over long periods, to sulfonic acids, RSO(3)H. In the absence of excess peroxide, RS(O)SR (R = p-tolyl), underwent disproportionation to RS(O)(2)SR and RSSR. Kinetics studies of the first oxidation reaction established that two peroxorhenium compounds are the active forms of the catalyst, CH(3)ReO(2)(eta(2)-O(2)) (A) and CH(3)ReO(eta(2)-O(2))(2).(OH(2)) (B). Their reactivities are similar; typical rate constants (L mol(-)(1) s(-)(1), 25 degrees C, aqueous acetonitrile) are k(A) = 22, k(B) = 150 (Bu(2)S(2)) and k(A) = 1.4, k(B) = 11 (Tol(2)S(2)). An analysis of the data for (p-XC(6)H(4))(2)S(2) by a plot of log k(B) against the Hammett sigma constant gave rho = -1.89, supporting a mechanism in which the electron-rich sulfur attacks a peroxo oxygen of intermediates A and B.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

Rhenium oxo compounds containing eta2-pyrazolate ligands

Reaction of potassium salts of sterically demanding pyrazolates (pz = bis-3,5-tert-butylpyrazolate, pz= bis-3,5-tert-butyl-4-methylpyrazolate) with Re2O7 affords soluble eta2-pyrazolate complexes of the type [(eta2-pz)ReO3(THF)n](1: pz, n= 1 and 2: pz, n= 0). They were characterized by spectroscopic methods and by X-ray crystallography confirming the eta2-coordinate ligands. Complex 1 employing the ligand with a proton in the 4-position retains one molecule of THF, whereas the additional methyl group in 2 leads to the base-free compound 2. Compound 1 reacts with pyridine and 3,5-dimethylpyridine to form Lewis base adducts of the type [(eta2-pz)ReO3(L)](3: L = py; 4: L = 3,5-Me2py). The pronounced sensitivity towards water of these complexes is demonstrated by the reaction of 1 with one equivalent of water forming the corresponding pyrazolium perrhenate [ReO4][pzH2](5). Its solid state structure shows a hydrogen bonded dimeric assembly. Catalytic activity of 1 is established in oxygen atom transfer-reactions (OAT) from dimethylsulfoxide to triphenylphosphine, and in epoxidations of cyclooctene employing bis(trimethylsilyl) peroxide (BTSP).     

Scanning electrochemical microscopy #54. Application to the study of heterogeneous catalytic reactions-hydrogen peroxide decomposition

A scanning electrochemical microscopy (SECM) approach for the analysis of heterogeneous catalytic reactions at solid-liquid interfaces is described and applied. In this scheme, reactant, generated at a tip, undergoes a reaction (e.g., disproportionation) at the substrate. The theoretical background for this study, performed by digital simulations using a finite difference method, considers a chemical reaction at the substrate with general stoichiometry. In this case, the fraction of regenerated mediator (nu(S)) may differ with respect to a substrate reaction that is the reverse of the tip reaction, resulting in an asymmetric mediator loop. Simulated tip current transients and approach curves at different values of the kinetic rate constant for reactions where nu(S) < 1 were used to analyze this new SECM situation. This approach was used to study the catalytic decomposition of hydrogen peroxide (HO2- --> 1/2O2 + OH-), where nu(S) = 0.5, on supported catalysts. A gold-mercury amalgam tip was used to quantitatively reduce dissolved O2 (mediator) to HO2-, which was decomposed back to oxygen at the catalyst substrate. Rate constants for the decomposition reaction on immobilized catalase and Pt particles were measured at different pH values by the correlation of experimental approach curves with the theoretical dependencies.     

Production of singlet oxygen by the reaction of non-basic hydrogen peroxide with chlorine gas

Non-basic hydrogen peroxide was found to be very easy to react with Cl(2) to produce singlet oxygen O(2)(a(1)Δ(g)) (i.e. the molecular oxygen in its first electronic excited state) when an H(+) absorbent such as C(5)H(5)N, CH(3)COONH(4), HCOONH(4) or NH(4)F was added into H(2)O(2) aqueous solution, and the long concealed fact that molecular H(2)O(2) can react with Cl(2) to produce O(2)(a(1)Δ(g)) was then uncovered. It is only when an H(+) absorbent has provided a stronger base than H(2)O to absorb the H(+) produced during the reaction that O(2)(a(1)Δ(g)) can be produced.     

Electrochemical behavior of aqueous acid perrhenate-containing solutions on noble metals: critical review and new experimental evidence

The actual state of the art in the reduction of perrhenate ions on noble metals is reviewed and discussed. Also, with the aim of contributing to better knowledge of this process, results of several experiments are presented. For the first time, spectroscopic evidence on the nature of the deposited rhenium layer on Pt and Rh and the detection of an intermediate in the reduction pathway toward metallic rhenium is provided. The role of the substrate in the electroreduction of perrhenate ions in aqueous acid media is emphasized, because it is directly associated with the formation of different H-containing species as reducing agents. Thus, those metals capable of adsorbing H atoms are able to reduce ReO(4)(-) to ReO(2) by H(ad) at potentials more positive than that of the hydrogen evolution reaction. Moreover, H(ad) reacts with the ReO(2) layer previously deposited, resulting in the formation of Re(III)-soluble species, which subsequently undergo disproportionation to Re and ReO(2). For metals that are not capable of adsorbing H, i.e., Au, molecular hydrogen is the reducing agent, leading to the formation of metallic Re. In addition, ReO(4)(-) is chemically reduced to metallic Re by hydride.     

The structural and spectroscopic characterisation of three actinyl complexes with coordinated and uncoordinated perrhenate: [UO2(ReO4)2(TPPO)3], [[(UO2)(TPPO)3]2(mu2-O2)][ReO4]2 and [NpO2(TPPO)4][ReO4

The first structural characterization of an actinide complex with coordinated perrhenate is reported, [UO2(ReO4)2(TPPO)3] (1). In this [UO2]2+ complex two [ReO4]- anions and three TPPO (triphenylphosphine oxide) P=O donor ligands are coordinated in the equatorial plane in a cisoid arrangement. This bonding arrangement, and apparent strain observed in the equatorially bonded ligands, is attributed to the solid state packing in adjacent molecules in which hydrophobic TPPO ligands form an effective "shell" around a hydrophilic core of two UO2(ReO4)2 moieties. Solid state vibrational spectroscopy (infrared and Raman), 31P CP MAS NMR and elemental analysis are also consistent with the formula of 1. Solution state vibrational spectroscopy and 31P NMR measurements in EtOH indicate the lability of the TPPO and [ReO4]- groups. The photolytic generation of peroxide in EtOH solutions of 1 leads to the formation of trace quantities of [[(UO2)(TPPO)3]2(mu2-O2)][ReO4]2, 2, in which the coordinated [ReO4]- groups of 1 have been displaced by bridging O2(2-), derived from atmospheric O2. Finally, attempts to synthesise a [NpO2]+ analogue of have resulted only in the formation of [NpO2(TPPO)4][ReO4], 3, in which [ReO4]- acts solely as a counter anion. From these results it can be concluded that [ReO4]- will bond to [UO2]2+, but will be readily displaced by a more strongly coordinating ligand (e.g. peroxide) and will not coordinate to an actinyl cation with a lower charge, [NpO2]+, under the same reaction conditions.     

Rhenium oxohalides: synthesis and crystal structures of ReO3Cl(THF)2, ReOCl4(THF), Re2O3Cl6(THF)2, and Re2O3Cl6(H2O)2

Convenient methods to prepare solvated rhenium oxochlorides are described; these compounds should serve as useful starting materials for rhenium chemistry. Treatment of perrhenic acid, HReO(4), with chlorotrimethylsilane or with thionyl chloride, followed by addition of tetrahydrofuran, forms the new oxochloride complexes ReO(3)Cl(THF)(2) and ReOCl(4)(THF), respectively. Small amounts of two dinuclear oxochlorides, which evidently resulted from adventitious hydrolysis, were also isolated: Re(2)O(3)Cl(6)L(2), where L = THF or H(2)O. All four compounds were characterized by X-ray crystallography. The rhenium(vii) complex ReO(3)Cl(THF)(2) adopts a distorted octahedral geometry in which the three oxo ligands are in a facial arrangement; the rhenium(vi) complex ReOCl(4)(THF) adopts a trans octahedral structure. The two dinuclear rhenium(vi) compounds both have a single, nearly linear, bridging oxo group; on each Re center, the three terminal chlorides adopt a mer arrangement, and the terminal oxo and the coordinated Lewis base are mutually trans. The water ligand in the aqua complex is hydrogen bonded to nearby THF molecules. IR data are given.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Oxygen-containing gas-phase diatomic trications and tetracations: ReO(z+), NbO(z+) and HfO(z+) (z=3, 4)

Three oxygen-containing gas-phase diatomic trications ReO(3+), NbO(3+) and HfO(3+) as well as the diatomic tetracation NbO(4+) have been observed by mass spectrometry at non-integer m/z values. These unusual triply charged molecular ion species, together with the corresponding diatomic dications ReO(2+), NbO(2+) and HfO(2+), were produced by energetic, high-current oxygen ((16)O(-)) ion beam sputtering of rhenium, niobium and hafnium metal samples, respectively, whose surfaces were dynamically oxidized by oxygen primary ion incorporation. In addition, NbO(z+) (z≤ 4) were generated by intense femtosecond laser excitation and photofragmentation (Coulomb explosion) of Nb(x)O(y) clusters and were detected through Time-of-Flight Mass Spectrometry (TOF). Our experimental results confirm previous reports on the detection of NbO(4+), NbO(3+), NbO(2+), HfO(3+) and HfO(2+) with Atom Probe mass spectrometry, whereas ReO(3+) and ReO(2+) apparently had not been observed before. In addition, these multiply charged molecular ions have been studied theoretically for the first time. Ab initio calculations of their electronic structures show that the diatomic trications ReO(3+), NbO(3+) and HfO(3+) are long-lived metastable gas-phase species, with bond lengths of 1.61 ?, 1.62 ? and 1.86 ?, respectively. They present large potential barriers with respect to dissociation of more than 2.7 eV. The corresponding diatomic dications are thermochemically stable molecules with very large dissociation energies (>3.5 eV). Our calculations predict the diatomic tetracation ReO(4+) to be a metastable ion species in the gas phase. We compute a potential barrier toward fragmentation of 0.6 eV; its formation requires a quadruple adiabatic ionization energy of 85.7 eV. Even though our calculations show that NbO(4+) is a weakly bound (dissociation barrier ～0.1 eV) metastable molecule, it is here identified via linear time-of-flight mass spectrometry.     

Mass transport characteristics of alkyl amines in a water/n-decane system

Rhenium (Re) nanoparticles have been synthesized by pulsed-laser decomposition of ammonium perrhenate (NH(4)ReO(4)) or dirhenium decacarbonyl (Re(2)(CO)(10)) in the presence of 3-mercaptopropionic acid (MPA) as capping agent, in both aqueous and organic media. Preliminary studies showed that the MPA-capped Re nanoparticles are capable of catalyzing the isomerization of 10-undecen-1-ol to internal alkenols via long chain migration of the C=C double bond at ca. 200°C. A one-pot synthesis of graphite-coated Re nanoparticles has also been achieved by pulsed-laser decomposition of Re(2)(CO)(10), due to photo-induced catalytic graphitization of the phenyl groups of PPh(3) on the surface of rhenium nanoparticles.     

Mechanistic insight into olefin epoxidation catalyzed by rhenium(V) oxo complexes that contain pyridazine-based ligands

Three novel tridentate pyridazine phenolate ligands were prepared in high yields by Schiff-base condensation of salicylic aldehyde with various pyridazine hydrazines (substituent R in the 6 position: R = Cl (HL(Cl)), (t)Bu (HL((t)Bu)), or tol (HL(tol))). They react with [ReOCl(3)(OPPh(3))(SMe(2))] to form rare mononuclear trans-dichloro oxo complexes of general formula [ReOCl(2)(L(R))] with R = tol (1), (t)Bu (2), or Cl (3) as confirmed by single-crystal X-ray diffraction analyses of 1 and 2. They were found to be catalysts for oxidation of cyclooctene to the corresponding epoxide by tert-butyl hydroperoxide (TBHP). Extensive UV-vis and NMR spectroscopic investigations followed by evaluation using the powerful Mauser method revealed mechanistic details. This showed the catalyst precursor [ReOCl(2)(L)] (2) to be transformed into the rhenium(VII) compound [ReO(3)L] (4) in a two-step reaction via intermediate INT which is tentatively assigned to [ReO(2)L]. Confirmation gave the isolation of 4 by reaction of 2 with excess of TBHP. Monitoring the catalytic oxidation reaction by UV-vis spectroscopy clearly excludes the two rhenium(V) compounds 2 and INT from being the catalytically active species as their formation is several orders of magnitude faster than the observed catalytic epoxidation reaction.     

Gauging the relative oxidative powers of compound I, ferric-hydroperoxide, and the ferric-hydrogen peroxide species of cytochrome P450 toward C-H hydroxylation of a radical clock substrate

Density functional calculations were performed in response to the controversies regarding the identity of the oxidant species in cytochrome P450. The calculations were used to gauge the relative C-H hydroxylation reactivity of three potential oxidant species of the enzyme, the high-valent oxo-iron species Compound I (Cpd I), the ferric hydroperoxide Compound 0 (Cpd 0), and the ferric-hydrogen peroxide complex Fe(H(2)O(2)). The results for the hydroxylation of a radical probe substrate, 1, show the following trends: (a) Cpd I is the most reactive species; in its presence the other two reagents will be silent. (b) In the absence of Cpd I, substrate oxidation by Cpd 0 and Fe(H(2)O(2)) will take place via a stepwise mechanism that involves initial O-O homolysis followed by H-abstraction from 1. (c) Cpd 0 will undergo mostly porphyrin hydroxylation and only approximately 15% of substrate oxidation producing mostly the rearranged alcohol, 3 (Scheme 2). (d) Fe(H(2)O(2)) will generate mostly free hydrogen peroxide (uncoupling). A small fraction will perform substrate oxidation and lead mostly to 3. Reactivity probes for these reagents are kinetic isotope effect (KIE) and the product ratio of unrearranged to rearranged alcohols, [2/3]. Thus, for substrate oxidation by Cpd 0 or Fe(H(2)O(2)) KIE will be small, approximately 2, while Cpd I will have large KIE values. Typically both Cpd 0 and Fe(H(2)O(2)) will lead to a [2/3] ratio < 1, while Cpd I will lead to ratios > 1. In addition, the product isotope effect (KIE(2)/KIE(3) not equal 1) is expected from the reactivity of Cpd I.     

DFT Study on the Electronic and Structural Properties of ReO5-/0 Clusters

The electronic and structural properties of ReO5 and ReO5 clusters are investigated using density functional theory (DFT) calculations. The lowest energy structures for both the anionic and neutral clusters are determined, and the corresponding photoelectron spectrum is simulated. Our results show that ReO5 can be described as an unusual peroxo molecule, Re(O)3(η2-O2) , while ReO5 is found to be exhibiting the O2 o radical character. Molecular orbital analyses and spin density analyses are performed to elucidate the chemical bonding and the electronic and structural properties in these two rhenium oxide clusters.     

Calix[4]arene rhenium(V) complexes as potential radiopharmaceuticals

The calix[4]arene platform was used for the syntheses of novel rhenium(V) complexes, that may have potential applications as radiopharmaceuticals. The reaction of ReO(PPh3)2Cl3 with tetradentate N2O2-calix[4]arene ligand 8 in ethanol gave the novel mixed-ligand rhenium complex 9 with the structure ReO(N2O2-calix)OEt. The configuration was elucidated by using a number of 1H NMR techniques. In 9, the ethoxy ligand could be easily and quantitatively exchanged for another monodentate ligand to give complex 12. Tetradentate N2S2-calix[4]arene ligand 15 formed the rhenium complex 16 either via reaction with ReO(PPh3)2Cl3 in an organic solvent or by reaction with rhenium gluconate in an aqueous solution. Complex 16 showed good stability in phosphate-buffered saline solution (37 degrees C, 5 d). The crystal structures of a mono- and a bimetallic complex were determined. The bimetallic N2O2-calixarene complex dimer 11 crystallized in the monoclinic space group C2/c, with a = 38.963(5) A, b = 23.140(6) A, c = 27.382(6) A, beta = 128.456(10) degrees, V = 19,333(7) A3, Z = 8, and final R = 0.0519. The monometallic N2S2 model complex 17 crystallized in the monoclinic space group Cc, with a = 15.715(2) A, b = 12.045(2) A, c = 20.022(3) A, beta = 94.863(12) degrees, V = 3776.3(10) A3, Z = 4, and final R = 0.0342.     

Quantitative determination of the speciation of surface vanadium oxides and their catalytic activity

A quantitative method based on UV-vis diffuse reflectance spectroscopy (DRS) was developed that allows determination of the fraction of monomeric and polymeric VO(x) species that are present in vanadate materials. This new quantitative method allows determination of the distribution of monomeric and polymeric surface VO(x) species present in dehydrated supported V(2)O(5)/SiO(2), V(2)O(5)/Al(2)O(3), and V(2)O(5)/ZrO(2) catalysts below monolayer surface coverage when V(2)O(5) nanoparticles are not present. Isolated surface VO(x) species are exclusively present at low surface vanadia coverage on all the dehydrated oxide supports. However, polymeric surface VO(x) species are also present on the dehydrated Al(2)O(3) and ZrO(2) supports at intermediate surface coverage and the polymeric chains are the dominant surface vanadia species at monolayer surface coverage. The propane oxidative dehydrogenation (ODH) turnover frequency (TOF) values are essentially indistinguishable for the isolated and polymeric surface VO(x) species on the same oxide support, and are also not affected by the Br?nsted acidity or reducibility of the surface VO(x) species. The propane ODH TOF, however, varies by more than an order of magnitude with the specific oxide support (ZrO(2) > Al(2)O(3) > SiO(2)) for both the isolated and polymeric surface VO(x) species. These new findings reveal that the support cation is a potent ligand that directly influences the reactivity of the bridging V-O-support bond, the catalytic active site, by controlling its basic character with the support electronegativity. These new fundamental insights about polymerization extent of surface vanadia species on SiO(2), Al(2)O(3), and ZrO(2) are also applicable to other supported vanadia catalysts (e.g., CeO(2), TiO(2), Nb(2)O(5)) as well as other supported metal oxide (e.g., CrO(3), MoO(3), WO(3)) catalyst systems.     

Rhenium(V) oxo complexes with acetylacetone derived Schiff bases: structure and catalytic epoxidation

Substitution reactions of rhenium(V) oxo precursors [ReOCl3(PPh3)2] or [NBu4][ReOCl4] with the bidentate acetylacetone-derived ketoamine ligands APOH = 4-anilino-3-penten-2-one, DPOH = 4-[2,6-dimethylanilino]-3-penten-2-one, and MTPOH = 4-[2-(methylthio)anilino]-3-penten-2-one gave the complexes [ReO(APO)Cl2(PPh3)] (1), [ReO(DPO)Cl2(PPh3)] (2), and [NBu4][ReOLCl3] (3, L = APO; 4, L = DPO; 5, L = MTPO), respectively. All complexes exhibit only one ketoamino chelate, independent of the amount of ligand added to the rhenium precursors. The complexes were characterized by 1H and 13C NMR spectroscopy. X-ray crystal structures of the complexes 1, 2, 4, and 5, including that of MTPOH, were determined, revealing the trans position of the two oxygen atoms and the trans-Cl,Cl conformation in 1 and 2, in contrast to most other rhenium complexes of this type where the cis-Cl,Cl conformation is observed. Coordination of the potentially tridentate ligand MTPOH in 5 is bidentate with a dangling thioether substituent. Compound 2 shows catalytic activity in the oxidation of cis-cyclooctene with tert-butylhydroperoxide.     

Dioxaborirane: a highly reactive peroxide that is the likely intermediate in borate catalysed electrophilic reactions of hydrogen peroxide in alkaline aqueous solution

This paper reports on a kinetic and theoretical study into the borate mediated reaction of dimethyl sulfide with hydrogen peroxide in both acid and alkaline conditions. At high pH, whilst the kinetic data is consistent with the catalytic species being monoperoxoborate, formed from the rapid equilibrium between hydrogen peroxide and boric acid, DFT calculations show that this species is in fact less reactive than hydrogen peroxide, requiring us to seek an alternative catalytic mechanism. DFT provides an important insight for this, showing that although boric acid and peroxoboric acid are primarily Lewis acids, they can exhibit a small degree of Br?nsted acidity, allowing, respectively, the B(O)(OH)(2)(-) and HOOB(OH)(O)(-) anions to exist in small concentrations. Whilst the peroxoborate anion, HOOB(OH)(O)(-), is predicted to have only marginal catalytic activity, its tautomer, dioxaborirane, (HO)(2)BO(2)(-), a three membered cyclic peroxide, has a very low activation barrier of 2.8 kcal/mol. Hence, even though dioxaborirane is likely to be present in very low concentrations, it is still sufficiently reactive for overall rate enhancements to be observed for this system. This is the first literature report of this species. The observed low selectivity observed for borate catalysed reactions of hydrogen peroxide with a range of substituted phenyl methyl sulfides in our previous study (D. M. Davies, M. E. Deary, K. Quill and R. A. Smith, Chem.-Eur. J. 2005, 11, 3552-3558) is further evidence in favour of a highly reactive catalytic species. At low pH, kinetic data shows that borate catalyses the reaction between hydrogen peroxide and dimethyl sulfide; this is supported by DFT calculations that predict peroxoboric acid to be an effective catalytic intermediate, with an energy barrier of 7.4 kcal mol(-1) compared to 10.1 kcal mol(-1) for the uncatalysed system. Nevertheless, the overall contribution of this pathway is small because of the unfavourable equilibrium between hydrogen peroxide and boric acid to form peroxoboric acid.     

Synthesis and characterization of novel 99gTc(V) and Re(V) complexes with water-soluble tetraaza diamido dipyridino ligands: single-crystal X-ray structural investigations of mono- and dinuclear complexes

Rhenium and technetium are known for their useful applications in nuclear medicine with similar properties. In this study, new diamido dipyridino (N(4)) water-soluble ligands (2-C(5)H(4)NCH(2)NHCO)(2)CH(2), 1 (L(1)H2), (2-C(5)H(4)NNHNHCO)(2)CH(2), 2, and [2-C(5)H(4)N(+)(O)(-)CH(2)NHCO](2)CH(2), 3, were synthesized. Reaction of L(1)H2 with ReOCl(3)(PPh(3))(2) resulted in the novel six-coordinated rhenium(V) complex, trans-ReO(L(1))(OEt), 4. The complex was characterized by spectroscopic methods, and its X-ray crystallographic analysis revealed that rhenium is coordinated to four nitrogen atoms of the ligand and to two oxygen atoms from the deprotonated ethanol and the oxo group respectively in a distorted octahedral geometry. In solution, complex 4 was transformed to a new complex 5, which was proved to be the dinuclear complex mu-oxo [ReO(L(1))](2)O. Reaction of 1 with [n-Bu(4)N][ReOCl(4)] resulted in the neutral complex 6, trans-[ReO(L(1))]Cl. Similarly, when ligand 1 was reacted with [n-Bu(4)N][(99g)TcOCl(4)], the neutral trans-[(99)TcO(L(1))]Cl complex 7 was formed, which upon dissolution transformed into a cationic complex 8, trans-[(99)TcO(L(1))(OH(2))](+)Cl(-). The single-crystal X-ray structure of 8 reveals that the coordination sphere about technetium is a distorted octahedron with four nitrogen atoms in the equitorial plane, while doubly bonded oxygen and coordinated water occupy the apical positions. Further dissolution of 8 resulted in the formation of dinuclear mu-oxo [TcO(L(1))](2)O, 9. This study shows that Tc and Re have similar metal core structures in solution for diamido dipyridino systems, besides similarity in geometrical structure, proved by the X-ray structures on the same ligands.