Use of an Aqueous Micellar Medium to Improve the Spectrophotometry Determination of Cyanide Ion with 5,5′-Dithiobis(2-Nitrobenzoic Acid)

Abstract

The spectrophotometric method for the determination of cyanide, which is based on the reaction of cyanide ion with 5,5′-dithiobis(2-nitrobenzoic acid) to displace the corresponding absorbing thiol anion, has been reinvestigated using an aqueous cetyltrimethylammonium bromide micellar reaction medium. The rate of the analytical reaction is increased considerably in the presence of the cationic surfactant. Thus, the time required for the spectrophotometric determination of cyanide ion in the 0.18 – 2.80 μg/ml range using this procedure is decreased from 25 minutes to 1 – 3 minutes.     

Ternary Complex Nickel(II)/3-(4′,5′-Dimethyl-2′-Thiazolylazo)-2,6-Dihydroxybenzoic Acid/Cyanide. Spectrophotometric Determination of Nickel

Abstract

A spectrophotometric method for nickel has been developed based on the formation of a ternary complex in the system Ni(II)/3-(4′,5′-dimethyl-2′-thiazolylazo)-2,6-dihydroxybenzoic acid/cyanide at pH 9.2 (borate buffer), which allows the determination of 0.05–0.47ppm of nickel (ε = 3.53×10⁴ 1.mol^?1. cm^?1) at 538nm. Interferences have been studied and the method applied to the determination of nickel in low alloy steels.     

Complex Formation Between Hydroxy Naphthol Blue and First Row Transition Metal Cyanide Complexes

Abstract

It has been found that cyanide complexes of first row transition metal elements exhibit enhanced binding to hydroxy naphthol blue (HNB) relative to the binding of corresponding aquo-ions. HNB forms a 2:1 complex with Fe³⁺ and Cu²⁺ cyanides, and 1:1 complexes with all other transition metal cyanide complexes studied; formation constants have been calculated from the spectrophotometric data in each case. It is possible to use HNB as a spectrophotometric reagent for transition metal cyanide complexes, lower limits of detection being determined for each complex.     

Triphenyltetrazolium chloride as a new analytical reagent for molybdenum(VI): Application to plant analysis

Solvent extraction of molybdenum(VI) ion associate with triphenyltetrazolium chloride (TTC) has been studied. TTC was proposed as reagent for the spectrophotometric determination of micro amounts of molybdenum(VI) at λ_max 250 nm. The optimum conditions for extraction of molybdenum(VI) as an ionassociation complex with TTC has been determined. Beer’s law is obeyed in the range of 0.5–10 μg/mL molybdenum(VI). The molar absorptivity of the ion-pair is 1 × 10⁶ L/mol cm. The sensitivity of the method is 9.6 × 10⁻⁵ μg/cm². The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: distribution constant K _D = 32.64, extraction constant K _ex = 2.19 × 10¹⁰ association constant β = 6.71 × 10⁸. The interferences of different cations, anions on molybdenum(VI) determination were also investigated. A sensitive and selective method for the determination of microquantities of molybdenum(VI) has been developed. The determination was carried out without preliminary separation of molybdenum. A novel procedure of molybdenum(VI) extraction and spectrophotometric determination in different plant samples was examined.     

Two new cyanide-bridged complexes, {[Cu(men)2][Ni(CN)4]}n and [Mn(bpy)2]4[Mo(CN)8]2·0.5MeOH·0.75H2O: Syntheses and crystal structures

Two novel cyano-bridged complexes, {[Cu(men)₂][Ni(CN)₄] _n (1) (men = N,N′-dimethyl-ethylenediamine) and [Mn(bpy)₂]₄[Mo(CN)₈]₂·0.5MeOH·0.75H₂O (2) (bpy = 2,2′-bipyridine) have been synthesized and structurally characterized by IR spectroscopy and X-ray crystallography. The complex 1 has onedimensional zigzag chain structure in which the Ni atom is coordinated by four cyanide groups, and the Cu atom is surrounded by four nitrogen atoms of the two men ligands in equatorial plane and two nitrogen atoms of the bridging cyanide in axial positions; the Cu centre is in a distorted octahedral environment. Owing to weak interactions, complex 1 is self-assembled into two-dimensional network via N-H...N hydrogen bonds. In 2, the basic structural unit is centrosymmetric and contains four Mn centers connected by two octacyanomolybdates via eight cyanide bridges. Each Mo atom is linked via four cyanide groups to four Mn, and the other four cyanide groups are terminal. From X-ray single crystal analysis (room temperature), 1 crystallizes in monoclinic space group P2₁/n with a = 6.7332(7) ?, b = 13.9248(15) ?, c = 9.0869(10) ?, β = 98.4030(10)°, V = 843.05(16) ?³, Z = 2; 2 crystallizes in monoclinic space group P2₁/n with a = 13.886(6) ?, b = 24.116(11) ?, c = 15.263(7) ?, β = 90.175(6)°, V = 5111(4) ?³, Z = 2. Original Russian Text Copyright ? 2009 by X. Chen, P. Yang, S.-L. Ma, S. Ren, M.-Y. Tang, Y. Yang, Z.-J. Guo, and L.-Z. Liu The text was submitted by the authors in English. Zhurnal Strukturnoi Khimii, Vol. 50, No. 3, pp. 518–521, May–June, 2009.     

Improved spectrophotometric determination of cyanide with organic disulfides using dimethylformamide

The rate of reaction of cyanide ion with the dissulfide 5,5′-dithiobis(2-nitrobenzoic acid) (DTNB) is increased considerably with N,N-Dimethylformamide present. The time required for the spectrophotometric determination of cyanide using this procedure is decreased from 2 hours to 30 minutes or less.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

Spectrophotometric determination of total cyanide in waste waters in a flow-injection system with gas-diffusion separation and preconcentration

An automated flow-injection system with gas diffusion separation and preconcentration and spectrophotometric detection is described for the determination of total cyanide in waste waters. An unstable red intermediate product of the reaction of cyanide with isonicotinic acid and 3-methyl-1-phenyl-2-pyrazolin-5-one is used instead of the conventional blue final product to improve the efficiency. A novel combination of a gas-diffusion separator with the sampling valve enables efficient on-line separation, preconcentration and sampling of cyanide. The sampling frequency is 40 h^?1 and the detection limit is 0.006 μg ml^?1 (3σ) when a 2-ml sample is taken and a preconcentration factor of 3.5 is achieved. The relative standard deviation is 1.4% (n = 22) at the 0.5 μg ml^?1 level. Results obtained with the proposed method are in good agreement with the standard manual spectrophotometric method. Interference studies show that in the presence of 1,10-phenanthroline, most potential interferents present in appreciable amounts do not interfere, but the interference from cobalt is not overcome in this system.     

A novel spectrophotometric method for determination of cyanide using cobalt (II) phthalocyanine tetracarboxylate as a chromogen

Cobalt (II) phthalocyanine tetracarboxylate [Co (II)Pc-COOH] has been prepared and used in aqueous solutions as a novel chromogenic reagent for the spectrophotometric determination of cyanide ion. The method is based on measuring the increase in the intensity of the monomer peak in the reagent absorbance at 682 nm due to the formation of a 1 : 2 [Co (II)Pc-COOH] : [CN] complex. The complex exhibits a molar absorptivity (ε) of 7.7 × 10⁴ L mol^?1 cm^?1 and a formation constant (K_f ) of 5.4 ± 0.01 × 10⁶ at 25 ± 0.1°C. Beer's law is obeyed over the concentration range 0.15–15 µg mL^?1 (5.8 × 10^?6–5.8 × 10^?4 M) of cyanide ion, the detection limit is 20 ng mL^?1 (7.7 × 10^?7 M) the relative standard deviation is ±0.7% (n = 6) and the method accuracy is 98.6 ± 0.9%. Interference by most common ions is negligible, except that by sulphite. The proposed method is used for determining cyanide concentration in gold, silver and chromium electroplating wastewater bath solutions after a prior distillation with 1 : 1 H₂SO₄ and collection of the volatile cyanide in 1 M NaOH solution containing lead carbonate as recommended by ASTM, USEPA, ISO and APAHE separation procedures. The results agree fairly well with potentiometric data obtained using the solid state cyanide ion selective electrode.     

A Fluorimetric Method for the Determination of Cyanide with Fluorescein and Iodine∗

Abstract

A rapid, simple and sensitive fluorimetric method has been developed for the determination of cyanide with fluorescein as fluorogenic reagent (λ_ex = 494 nm, λ_em = 514 nm) at pH 6.0–7.0. A linear calibration curve was obtained in the range 0.004–2.0 μg CN^?/25 ml. The detection limit is 0.004 μg CN^-/25 ml. The method was successfully applied to the determination of cyanide in waste water.

     

A highly selective and sensitive dual-channel chemosensor for cyanide based on sulfahydrazone derivative

A colorimetric and fluorescent cyanide probe bearing naphthol and sulfahydrazone groups has been designed and synthesized. This structurally simple probe displays a rapid response and high selectivity for cyanide in DMSO/EtOH (v/v = 2:8) solution. The addition of CN^? to the sensor p-toluenesulfonyl-2-hydroxy-1-naphthylhydrazone (L3) induced a remarkable color change from pale-yellow to yellow, and green fluorescence changed to yellow. The ¹H NMR titration and DFT calculations suggested that the selective sensing process is based on a nucleophilic addition reaction of cyanide to imine. Test strips based on sensor L3 were fabricated, which could act as a convenient and efficient test kit to detect CN^? for “in-the-field” measurements.     

Spectrophotometric Determination of Iron with EDDHA (Ethylenediamine N N′ Bis O-Hydroxyphenilacetic Acid) by Derivative Spectroscopy

Abstract

Derivative spectrometry is applied to a spectrophotometric determination of iron with EDDHA. the effect of amount of reagent, acidity, time and temperature have also been studied. the interval of application of the method is increased to 0.16–15.36 μg Fe(III) mL^?1. the reproducibility, precision and potential interferents have been investigated. the interferences due to chlorate, wolframate, molybdate, permanganate, cyanide, cromate, Cu(II), Be(II), Ce(III), Al(III), Hg(II), Sn(II) and Zn(II) are reduced in this new procedure.     

Test Films for the Determination of Aromatic Amines and Hydrazines in Aqueous Solutions

Conditions of the test determination of toxic aniline (I), N,N-dimethylaniline (II), N,N-diethylaniline (III), 2,2,4-trimethyl-1,2-dihydroquinoline (IV), 1,1-dimethylhydrazine (V), and phenylhydrazine (VI) as their 4,6-dinitrobenzofuroxan (I) and 5,7-dinitrobenzofurazan (II, III, IV, V, VI) derivatives in aqueous solutions were found. Visual and spectrophotometric measurement of the signal was used. The reagents were immobilized in nitrocellulose films. Optimal results of visual determination of color development in test films were obtained with reagents immobilized in nitrocellulose at their concentration of 5 mass % and pH of the test solution in the range 6.0–7.5. The spectrophotometric measurement of the signal of test films was performed at wavelengths of 500–560 nm for I, V, and VI and 610–620 nm for II, III, and IV. The detection limit for spectrophotometric measurement was 0.01, 0.18, 0.13, 0.15, 0.16, and 0.04 mg/L for I, II, III, IV, V, and VI, respectively. The analytical range of the toxicants was 0.05–6.0 mg/L. Test determination is possible in the presence of alkylamines, ammonia, phenols, carboxylic acids, and inorganic salts.     

Didodecyldimethylammonium Bromide Bilayer Vesicle-Catalyzed and Uranine-Sensitized Chemiluminescence for Determination of Free Cyanide at Picogram Levels by Flow Injection Method

Abstract

A novel chemiluminescence system, didodecyldimethylammonium bromide-uranine-sodium hydroxide, is described for the determination of ultratraces of free cyanide by flow injection method. Organized surfactant assemblies(bilayer vesicles) incorporated with a sensitizer (uranine) permit the determination of free cyanide very selectively with a limit of determination of 1 pg (20-μ1 sample injection). Sulfide, the strongest CL inducer after free cyanide, provides a signal 0.1 % of that for free cyanide.     

Color Reaction Between 4-(2-Pyridylazo)Resorcinol and Mercury (II) in the Presence of Surfactant,and Improved Spectrophotometric Determinations of Mercury(II) and Cyanide Ion with its Coloring

Abstract

The reactions among 4-(2-pyridylazo)resorcinol (PAR), mercury(II) and/or cyanide ion in the presence of water soluble surfactants alone or combination were systematically investigated at about pH 9. The spectrophotometric determinations of mercury(II) and cyanide ion were investigated by using the PAR-mercury(II)-HPC complex (3:2:2 molar ratio) in the presence of N-hexadecylpyridinium chloride (HPC) alone; calibration graphs were rectilinear in the ranges of 0 – 40 μg mercury(II) and 0 –10 μg cyanide ion in a final 10 ml with the apparent molar absorptivities of 5.9 × 10⁴ for mercury(II) and 2.5 × 10⁴ 1 mol^?1 cm^?1 for cyanide ion at 590 nm. The proposed method had advantages—rapidity, simplicity without solvent extraction, and sensitivity in comparison with reported solvent extraction methods. The interference of foreign ions decreased 1/2–l//4-fold compared with that in the presence of non-ionic surfactant alone.     

Spectrophotometric Determination of Cystine with O-Phthalaldehyde in the Absence of Thiol

Abstract

A spectrophotometric method for the determination of cystine with o-phthalaldehyde (OPA) in the absence of thiol is described. When cystine is heated at 60[ddot]C for 30 min in a low excess of OPA (pH 9.5), a very stable derivative with 1:2 stoichiometry (cystine:OPA) and an absorption maximum at 335 nm (E = 4600) is formed. At pH < 1 the derivative is protonated (protonation constants: log K¹ = 5.88 and log K² = 3.70 at I = 0.1 and 20[ddot]C) and another absorption band at 440 nm (E = 3800) appears, which allows the determination of cystine in the presence of other amino acids.     

Catalytic kinetic spectrophotometric determination of iron with (dibromo-<Emphasis Type="Italic">p</Emphasis>-sulfonic acid arsenazo)-potassium bromate-ascorbic acid system

A new method for the determination of traces of iron was developed based on its catalytic effect on the oxidation reaction of dibromo-p-sulfonic acid-arsenazo (DBS-arsenazo, DBS-ASA) by potassium bromate in a 5.0 × 10⁻³ M sulfuric acid medium. The optimum experimental conditions for the determination of iron using iron(III)-dibromo-p-sulfonic acid-arsenazo, (DBS-ASA)-potassium bromate-ascorbic acid system and its kinetic spectrophotometric properties were studied. The absorbance difference (ΔA) is linearly related with the concentration of iron(III) over the range of 0.20–6.0 ng/mL at the maximum absorption wavelength of 520 nm and described by the equation: ΔA = 0.133c (ng/mL) — 0.0133 with a regression coefficient of 0.9966. The detection limit of the method is 0.17 ng/mL. The method has been successfully used in the determination of traces of iron in potato samples. The obtained results agree with those of atomic absorption spectrometry.     

Spectrophotometric Determination of Vanadium in Complex Materials Using N-m-TMBHA and Thiocyanate

Abstract

Vanadium(V) reacts with N-m-Tolyl-p-methoxy benzohydroxamic acid to form 1:2 (metal to ligand) complex containing a basic V=O group and an acidic V-OH group, which forms addition compounds with thiocyanate to give a hyper and bathochromic effect in chloroform. On the basis of this bathochromic effect of thiocyanate a rapid, selective and sensitive method for the spectrophotometric determination of vanadium(V) has been developed. The blue coloured complex of vanadium(V) is extractable in chloroform having absorption maxima at 580nm and max 7100 ±50 1. mole^?1 cm^?1. The method is free from interferences of Mo(VI), W(VI), Zr(IV) and has been successfully applied for the analysis of steels and other complex materials.     

Spectrophotometric Study of 1,2,7-Trihydroxyanthraquinone-Mg(II) Complex. Determination of Mg(II)

Abstract

The spectrophotometric study of violet complex Anthrapurpurin-Mg(II) in a basic medium and a hydroalcoholic solution was made (δ_max - 530 nm., ? = 3.5 × 10³ 1 mol^?1 cm^?1, stoichiometry 1:1, apparent constant of stability log K = 9. 26). A new method for the spectrophotometric determination of Mg(II) is proposed for concentrations between one and six ppm. Relative errors between replicate samples were 0.90 %.     

Determination of formaldehyde and cyanide ion in human nasal discharge by using simple spectrophotometric methods

Environmental tobacco smoke (ETS) contains many toxic compounds which include substances classified as aldehydes (e.g. formaldehyde) and inorganic substances such as cyanide ions. The information on the determination of these compounds in water is available, but the monitoring data on the level of these substances in human body fluids are still lacking. In this work the procedure for determining cyanide ions and formaldehyde in samples of human nasal discharge by simple spectrophotometric technique is presented.