Metallomesogenic stationary phase for open-tubular capillary electrochromatography

A synthetic coppermesogenic polymer is prepared and then covalently bonded to the siloxane-based deactivated column as the stationary phases of open-tubular CEC with essentially high phase ratio. The EOF generated from the modified phase is surveyed through conventional aqueous buffers and hydroorganic mobile phases. Zeta potentials, which are computed from the EOF data and the ratio of dielectric constant to viscosity, are plotted as a function of pH, ionic molarity, and compositional range. These plots responsible for the electroosmotic characteristic of the bonded phases are found to be like those of bare fused-silica or deactivated columns through decreasing or increasing the ACN content in the mobile phase, respectively. This two-phase characteristic is basically derived from the polymeric configuration with carboxylato ligands attached onto the polysiloxane backbone. Phthalates and amino acids are suitable probes to examine the two phenomena, more-polar and less-polar mediums, respectively, and to judge whether the chromatographic retention is the major source of separation mechanism. With the mixing modes of Lewis acid-base interaction, dispersive force, and shape discrimination, the chromatographic partition adequately accomplishes the uneasily resolved separations by only CZE mode, although the electrophoretic migration is truly somewhat involved.     

Recent highlights in stationary phase design for open-tubular capillary electrochromatography

This review examines the most recent innovations made to achieve high performance in open-tubular capillary electrochromatography (OT-CEC) separations, focusing on the ingenious chemical and physical solutions made to increase the surface area and equip the stationary phase with exploitable selectivity. Among the approaches taken are chemically bonded ligands, etching with chemical bonding, sol-gels, molecularly imprinted polymers, porous layers, physically attached or adsorbed phases, and nanoparticle coatings. Particularly noteworthy are modern developments with macrocyclic receptor ligands, nanoparticles and open channel electrochromatography on-chip.     

Polymer-brush stationary phases for open-tubular capillary electrochromatography

Synthesis of poly(2-hydroxyethyl methacrylate) (PHEMA) brushes from the inside of silica capillaries by surface-initiated atom transfer radical polymerization (ATRP) yields unique stationary phases for open-tubular capillary electrochromatography (OT-CEC). Although PHEMA brushes have only a small effect on the separation of a set of phenols and anilines, derivatization of PHEMA with ethylenediamine (en) allows baseline resolution of several anilines that co-elute from bare silica capillaries. Derivatization of PHEMA with octanoyl chloride (C8-PHEMA films) affords even better resolution in the separation of a series of phenols and anilines. Increasing the thickness of C8-PHEMA coatings by a factor of 2 enhances resolution for several solute pairs, presumably because of an increase in the effective stationary phase to mobile phase volume ratio. Thus, this work demonstrates that thick polymer brushes provide a tunable stationary phase with a much larger phase ratio than is available from monolayer wall coatings. Through appropriate choice of derivatizing reagents, these polymer brushes should allow separation of a wide range of neutral molecules as well as compounds with similar electrophoretic mobilities.     

Sol-gel stationary phases for capillary electrochromatography

A review is presented on the current state of the art and future trends in the development of sol-gel stationary phases for capillary electrochromatography (CEC). The design and synthesis of stationary phases with prescribed chromatographic and surface charge properties represent challenging tasks in contemporary CEC research. Further developments in CEC as a high-efficiency liquid-phase separation technique will greatly depend on new breakthroughs in the area of stationary phase development. The requirements imposed on CEC stationary phase performance are significantly more demanding compared with those for HPLC. The design of CEC stationary phase must take into consideration the structural characteristics that will provide not only the selective solute/stationary phase interactions leading to chromatographic separations but also the surface charge properties that determine the magnitude and direction of the electroosmotic flow responsible for the mobile phase movement through the CEC column. Therefore, the stationary phase technology in CEC presents a more complex problem than in conventional chromatographic techniques. Different approaches to stationary phase development have been reported in contemporary CEC literature. The sol-gel approach represents a promising direction in this important research. It is applicable to the preparation of CEC stationary phases in different formats: surface coatings, micro/submicro particles, and monolithic beds. Besides, in the sol-gel approach, appropriate sol-gel precursors and other building blocks can be selected to create a stationary phase with desired structural and surface properties. One remarkable advantage of the sol-gel approach is the mild thermal conditions under which the stationary phase synthesis can be carried out (typically at room temperature). It also provides an effective pathway to integrating the advantageous properties of organic and inorganic material systems, and thereby enhancing and fine-tuning chromatographic selectivity of the created hybrid organic-inorganic stationary phases. This review focuses on recent developments in the design, synthesis, characterization, properties, and applications of sol-gel stationary phases in CEC.     

Nanochitosan crosslinked with polyacrylamide as the chiral stationary phase for open-tubular capillary electrochromatography

Nanoparticles exhibiting favorable surface-to-volume ratios create efficient stationary phases for electrochromatography. New nanomaterials derived from chitosan (CS) were immobilized onto modified capillaries for use as the chiral stationary phase (CSP) in open-tubular electrochromatography. This immobilization was achieved through the copolymerization of glycidyl methacrylate-modified nano-CS with methacrylamide (MAA) and bis-acrylamide crosslinkers (forming the MAA-CS capillary) rather than the attachment of nano-CS to the copolymer of glycidyl methacrylate, MAA, and bis-acrylamide (forming the MAA+CS capillary). The completed MAA-CS capillary and its precursors were examined by SEM and ATR-IR measurements. Before separating chiral samples, the MAA-CS capillary was characterized by electroosmotic flow measurements at varying pH values, concentrations, and volume percentages of organic modifiers in the running buffers. Tryptophan enantiomers were well separated by the MAA-CS capillary, whereas no enantioselectivity was observed in the MAA+CS capillary. With the addition of 80% MeOH into the phosphate buffer, the chiral separation of (±)-catechin was accomplished in a normal-phase mode. However, the new CSP has its limitations, as only two groups of α-tocopherol stereoisomers were separated.     

Enantioselective open-tubular capillary electrochromatography using cyclodextrin-modified gold nanoparticles as stationary phase

Enantioselective open-tubular CEC (OTCEC) with thiolated β-CD modified gold nanoparticles (CD-GNPs) as stationary phase was developed. The enantioselective OT capillary column was fabricated by electrostatic assembly of poly(diallydimethylammonium chloride) (PDDA) followed by self-adsorption of negatively charged CD-GNPs. The enantioselective capillary column has a steady EOF mobility over a wide pH range of 3.0 to 9.2 (RSD 4.8%), and is quite stable over 240 min with very good column to column reproducibility. Efficient enantioseparation of the presented method was demonstrated by analyzing three drug enantiomers. Our results show that the column exhibits good run-to-run repeatability for enantioseparations and can maintain the enantioselectivity for more than 1 month if the column was stored in CD-GNPs solution at 4 °C.     

A novel open-tubular capillary electrochromatography with magnetic nanoparticle coating as stationary phase

A novel open‐tubular capillary electrochromatography (OT‐CEC) with modified core/shell magnetic nanoparticles coating as stationary phase was introduced using external magnetic force to fix magnetic nanoparticles. The magnetic nanoparticles coating inside the capillary columns could be easily regenerated by removing and re‐applying the external magnetic field. Magnetic field intensity, concentration and flow rate of nanoparticles suspension were investigated to achieve simple and stable preparation. Mixture of five organic acids was used as the marker sample to evaluate the OT‐CEC system, and the relative column efficiency of anthranilic acid reaches 220 000 plates/m. The excellent within‐column and between‐column repeatability has been testified with the RSDs of retention time of less than 1.51 and 5.29%, respectively. The aqueous extract of rhizoma gastrodiae was analyzed by the OT‐CEC system, and 23 peaks were eluted in 30 min. Compared with conventional open‐tubular capillary column, this new system shows faster separation speed and higher column efficiency from the larger surface area of nanoparticles. It has great potential in the method development for the analysis of complex samples, since magnetic coating can effectively prolong the column life by expediently replacing stationary phase to eliminate the pollution or irreversible adsorption.     

Fluorinated covalent-organic polymers as stationary phase for analysis of organic fluorides by open-tubular capillary electrochromatography

Fluorinated porous materials, which can provide specific fluorine-fluorine interaction, hold great promise for fluoride analysis. Here, a novel fluorinated covalent-organic polymer was prepared by using 2,4,6-tris(4-aminophenyl)-1,3,5-triazine and 2,3,5,6-tetrafluorotelephtal aldehyde as the precursors and introduced as stationary phase for open-tubular capillary electrochromatography. The as-synthesized fluorinated covalent-organic polymer and the modified capillary column were characterized by infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectrometry. Based on strong hydrophobic interaction and fluorine–fluorine interaction provided by fluorinated covalent-organic polymer coating layer, the modified column showed powerful separation selectivity toward hydrophobic compounds, organic fluorides, and fluorinated pesticides. Additionally, the fluorinated covalent-organic polymer with good porosity and regular shape was uniformly and tightly coated on the capillary inner wall. The obtained highest column efficiency could reach up to 1.2 × 10⁵ plates⋅m⁻¹ for fluorophenol. The loading capacity of the modified column can reach 141 pmol for trifluorotoluene. Besides, the relative standard deviations of retention times for intraday run (n = 5), interday run (n = 3), and between columns (n = 3) were all less than 2.55%. Significantly, this novel fluorinated material-based stationary phase shows great application potential in fluorides analysis.     

Branched polyethyleneimine-bonded tentacle-type polymer stationary phase for peptides and proteins separations by open-tubular capillary electrochromatography

A novel tentacle-type polymer stationary phase covalently modified with branched polyethyleneimine (PEI) was developed for peptides and proteins separations by open-tubular CEC (OT-CEC). The preparation procedure included the silanization of capillary inner wall, in situ graft polymerization and PEI functionalization. A wrinkly polymer surface of multitudinous steric amine groups was evenly formed on the capillary inner wall, and anodic EOF could be gained within a wide pH range of 2.5-7.5. The electroosmotic mobility was examined for its dependence on pH as well as PEI concentrations. Good repeatability was gained with RSD for the migration time of EOF marker within 4.8% and satisfactory chemical stability was validated. Due to the existence of amine groups on the surface of tentacle-type polymer stationary phase, the silanol effect that occurs between the positively charged biomolecules and the silanols of the capillary column was greatly suppressed. Compared with a monolayer-coating capillary, seven enkephalin-related peptides were well resolved on the PEI-bonded column with high efficiencies. Favorable separations of peptides and proteins with high column efficiencies were obtained in 144,000-189,000 and 97,000-170,000 plates/m. Branched PEI-bonded tentacle-type polymer stationary phase has been proven to afford satisfactory retention and resolution of peptides and proteins.     

Preparation of stationary phases for open-tubular capillary electrochromatography using the sol-gel method

Capillary electrochromatography requires the deposition of a stationary phase inside the capillary. In this paper the sol-gel method is proposed for this purpose. The gels were prepared externally and injected into a fused-silica capillary, where anchorage to the capillary wall was possible through condensation reactions between the silanol groups of the capillary wall and the residual silanol groups the gel. Contrary to a commonly used practice, alkaline pretreatment of the inner capillary wall prior to the introduction and anchoring of the gel was found to be only marginally effective in improving the mechanical stability of the column. The influence of various parameters, such as the pH, the water content, the presence of alcohol (ethanol) on the formation of tetraethoxysilane (TEOS)-n-octyltriethoxysilane (C8-TEOS) hybrid gels of varied composition is discussed. The pH and the amount of water present were found to be the determining factors in the preparation of a stable gel with the desired mechanical and chromatographic properties. By carrying out the gel formation at 80 degrees C, capillary columns could be produced in 2.5 h. While an acidic pH was required during (external) gel formation, subsequent treatment of the gel inside the capillary with an alkaline solution ('aging') was found to improve separation and stationary phase capacity significantly. The capillary columns were subsequently used to separate a mixture of polycyclic aromatic hydrocarbons in less than 3 min.     

Perphenylcarbamoylated beta-cyclodextrin bonded-silica particles as chiral stationary phase for enantioseparation by pressure-assisted capillary electrochromatography

Perphenylcarbamoylated beta-cyclodextrin bonded-silica particles (5 microm) were packed into 75-mum fused-silica capillaries, and used for the enantiomer separation of neutral and basic solutes by pressure-assisted capillary electrochromatography. Triethylammonium acetate and phosphate buffer were employed as the BGEs. A cathodic EOF was observed with these two BGEs. Seven chiral analytes were successfully resolved into their enantiomers under optimized conditions, and five of them could be baseline-separated within 12 min due to their high electrophoretic mobility. Better results were achieved with phosphate buffer as the BGE. The effects of organic content and pH on the enantioseparation were also investigated.     

动态磁涂覆混合固定相开管毛细管电色谱中电渗流的特征

将表面分别被改性成C18和氨基的磁性纳米颗粒按照不同比例混合,制备成具有不同分离选择性的混合固定相,进一步采用动态磁涂覆的方法制备开管毛细管电色谱柱。通过考察这种色谱柱中不同种类固定相表面物理化学性质对电渗流的综合影响,从理论上说明了其电渗流的特征。分别在不同固定相配比及不同涂覆长度条件下进行实验,理论与实验结果相符,证实通过调节固定相配比或磁铁对数可以便捷地调节电渗流的大小。     

Analytical separations in open-tubular capillary electrochromatography

This review represents a summary of recent progress in open-tubular capillary electrochromatography (OT-CEC) for chiral and achiral separations. The OT-CEC approach is an alternative to packed-CEC that could eliminate the problems associated with retaining frits and silica particles. In OT-CEC, the stationary phase is immobilized on the inner walls of the capillary. Preparation of the stationary phase is critical for OT-CEC. The preparation methods for capillary columns include (i) adsorption, (ii) covalent bonding and/or cross-linking, (iii) porous layers, (iv) chemical bonding after etching, (v) sol-gel, and (vi) molecular imprinting. Major developments, potential applications, technical difficulties and advantages associated with these wall coatings in OT-CEC are presented. In addition, the coupling of OT-CEC with mass spectrometry (MS) is briefly reviewed. Several applications of this hyphenated technique for analytical separations are also summarized.     

Recent trends in open-tubular capillary electrochromatography

Capillary electrochromatography (CEC), which combines the advantages of the high efficiency of capillary electrophoresis (CE) and the high selectivity of liquid chromatography (LC), has recently received considerable attention. Most CEC experiments have been performed with capillary columns packed with small LC packing materials (1.5–5 μm particle diameter). However, problems such as difficulties in packing the small LC packing materials and fabricating the frits still exist in preparing the CEC column. The use of open-tubular columns in CEC is therefore an alternative approach that can eliminate the problems encountered in packed-column CEC. So far, several types of open-tubular columns have been proposed for CEC separations and in this article recent progress in this area is reviewed.     

Evaluation of ODS-AQ stationary phase for use in capillary electrochromatography

The aim of this study was to evaluate the applicability of ODS-AQ packing material as a stationary phase in capillary electrochromatography (CEC). The electroosmotic flow created on an ODS-AQ stationary phase was measured at different mobile phase compositions and at different column temperatures. It was observed that the electroosmotic flow generated in the column increased by 50% when the temperature of the system was raised from 20 degrees C to 60 degrees C, while all other conditions were kept constant. The electroosmotic flow produced by the ODS-AQ stationary phase was found to be comparable to the flow generated in a column packed with Nucleosil bare-silica material. In addition, a set of polar compounds (D-lysergic acid diethylamide derivatives) was utilized to determine the influence of temperature and mobile phase composition on their chromatographic behavior on an ODS-AQ stationary phase in a CEC mode. A linear relationship between the solute retention factor and column temperatures was seen over the temperature range studied (20 degrees C to 60 degrees C). A quadratic function was used to describe the changes in the solute retention factors with variation of acetonitrile concentration in the mobile phase.     

Alkylthiol gold nanoparticles in open-tubular capillary electrochromatography

Open-tubular columns for capillary electrochromatography (CEC) were formed by immobilising dodecanethiol gold nanoparticles on prederivatised 3-aminopropyl-trimethoxysilane (APTMS) or 3-mercaptopropyl-trimethoxysilane (MPTMS) fused-silica capillaries. The initial stage of this research involved the synthesis and characterisation of dodecanethiol gold nanoparticles, with tunnelling electron microscopy analysis of the dispersed phase of the gold nanoparticles dispersion in CHCl3, revealing spherical particles. The surface features of an Au-MPTMS coated capillary column were determined using scanning electron microscopy. The electroosmotic flow characteristics of Au-APTMS and Au-MPTMS capillary columns were then determined, by varying the pH and the voltage. The electrochromatographic properties of the gold nanoparticles CEC capillaries were investigated using a "reversed-phase" test mixture of thiourea, benzophenone and biphenyl and selected pyrethroid pesticides. Efficient separations of benzophenone and biphenyl solutes on Au-MPTMS and Au-APTMS capillary columns were obtained, as were linear plots of logarithm capacity factor versus % MeOH. A study of the reproducibility of retention for these solutes on Au-APTMS, Au-MPTMS and on a loosely coated capillary demonstrated the necessity of a coupling agent to prevent the gold nanoparticles from washing-off. These dodecanethiol gold capillary columns are easier to produce and operate than packed capillary columns. The research work confirms the use of gold nanoparticles as a novel phase for open-tubular CEC, demonstrating reproducible retention and characteristic reversed-phase behaviour.     

Porous membrane structures as stationary phase for capillary electrochromatography

This work presents the application of membrane technology for the fabrication of stationary phase for CEC columns using the technique based on phase inversion of polymer solution. A blend of polyimide P84 and sulphonated poly(ether ether ketone was processed via immersion precipitation dry‐wet spinning into small‐bore porous fiber. The morphology, zeta potential, and performance of the porous structure in the CEC separation were investigated. Noncharged molecules (as markers of the electroosmotic flow) and small organic compounds were injected into the column, driven under the application of voltage, and detected on the electropherogram. The proof of concept of applying porous membrane structure as stationary phase for CEC was shown and possible optimization to improve efficiency and selectivity was suggested.     

Separation of structurally related peptides by open-tubular capillary electrochromatography using (metallo)porphyrins as the adsorbed stationary phase

Several (metallo)porphyrins, particularly the porphyrin derivative tetraphenylporphyrin, and complexes of porphyrin derivatives with metal ions (Zn2+, Cu2+, Ni2+, Co2+, Co3+) have been employed as the stationary phase physically adsorbed onto the inner fused-silica capillary surface for open-tubular capillary electrochromatography, and applied for the separation of structurally related peptides. Four octapeptides, derivatives of the B23-B30 fragment of the B-chain of human insulin with minor changes in their sequences (presence of lysine or ornithine in position B-29, presence or absence of phenylacetyl protecting group on the amino group of lysine/ornithine or N-terminal amino group of glycine), were studied as model analytes. Separations were performed both in alkaline (pH 9.0) and in acidic (pH 2.25) background electrolytes, and the changes in the migration/retention behaviour of the model set of peptides were investigated with respect to the porphyrin periphery/central metal atom and the charge of the octapeptides modified. The key moment of successful separation of these peptides seems to be the accessibility of functional groups of the peptides to the interaction with the modifiers tested herein.     

Cyclodextrin-NH-MIL-53 open tubular stationary phase for capillary electrochromatography enantioseparation

A novel chiral group functionalized metal-organic framework, Cyclodextrin-NH-MIL-53, was synthesized and modified on the inner wall of a capillary column via a post-synthetic process. The prepared chiral metal-organic framework was utilized as a chiral capillary stationary phase and used in an open-tubular capillary electrochromatography method to enantioseparate several racemic amino acids. Excellent enantioseparation of five pairs of enantiomers was obtained in this chiral separation system (Resolutions of D/L-Alanine = 16.844, D/L-Cysteine = 3.617, D/L-Histidine = 9.513, D/L-Phenylalanine = 8.133, and D/L-Tryptophan = 2.778). The prepared Cyclodextrin-NH-MIL-53 and the Cyclodextrin-NH-MIL-53-based capillary columns were characterized by scanning electron microscopy, X-ray diffraction, Fourie-transform infrared spectroscopy, and circular dichroism. The chiral capillary electrochromatography conditions, such as separation conditions, amount of Cyclodextrin-NH-MIL-53, and electroosmotic flow, were optimized. This research is estimated to present a novel insight and method for the design and use of metal-organic framework-based capillaries for enantioseparation.     

Comparison of separation behavior of benzodiazepines in packed capillary electrochromatography and open-tubular capillary electrochromatography

Packed column capillary electrochromatography (CEC), open-tubular CEC and microcolum liquid chromatography (LC) using a cholesteryl silica bonded phase have been studied to compare the retention behavior for benzodiazepines. It has been found that packed column CEC gives better resolution, faster analysis time than microcolumn LC for benzodiazepines maintaining similar selectivity except for some solutes which are charged species under the separation conditions. However, open-tubular CEC gave different selectivities to a larger extent for charged benzodiazepines from that which should be produced by the chromatographic properties of the cholesteryl silica phase. Charged species migration times are mainly influenced by electrophoretic mobility rather than the chromatographic interactions.