Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Synthesis,crystal structure and complexation behaviour of a thiacalix[4]arene bearing 1,2,3-triazole groups

The structure and complexation behaviour of 1,3-alternate-1,2,3-triazole based on thiacalix[4]arene,1,3-alternate-1 and 2 have been determined by means of X-ray analysis, fluorescence and ¹H NMR spectroscopy. The X-ray results suggested that the nitrogen atom N3 on triazole ring can act as hydrogen bond acceptors in the self-assembly of a supramolecular structure. The fluorescence spectra changes indicated that the thiacalix[4]arene bearing 1,2,3-triazole groups were highly selective for Ag⁺ in comparison with other tested metal ions by enhancement of the monomer emission of pyrene. The ¹H NMR results suggested that Ag⁺ can be strongly bonded by the triazole groups with the cooperation of the ionophoric cavity formed by the two inverted benzene rings and the sulfur atoms of the thiacalix[4]arene.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Substituted calix[n]arenes. Synthesis ofp-isopropylcalix[4]arene and the structure of its benzene clathrate

p-Isopropylcalix[4]arens was synthesized by alkylation of unsubstituted calix[4]arene in the presence of ferric chloride hexahydrate. The structure of the compound and its benzene clathrate was established by NMR spectroscopy and X-ray diffraction analysis. Tashkent State University. A. S. Sadykov Institute of Bioorganic Chemistry, Academy of Sciences, Uzbekistan. Translated fromZhurnal Strukturnoi Khimii, Vol. 37, No. 3, pp. 539–543, May–June, 1996.     

Metal ions recognition by 1,2,3-triazolium calix[4]arene esters synthesized via click chemistry

Two triazole-modified calix[4]arene diesters were synthesized via Huisgen 1,3-dipolar cycloaddition between azides esters and alkynylcalixarenes. Their structures had been deduced from ¹H NMR, element analysis and ESI-MS. Two-phase extraction experiments indicated that triazole-modified calix[4]arene diethylester 3a exhibited Cs⁺ selectivity.     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

Nanoencapsulation of calix[4]arene inclusion complexes

A hexameric resorcinarene nanocapsule in wet CDCl3 forms inclusion complexes of calix[4]arene with tetramethylammonium and trimethylsulfoxonium cations to give highly stable Russian-doll-type multicomponent assemblies. The 2D NOESY experiments revealed the size of the assembly, the close proximity of the encapsulated calix[4]arene molecule to the resorcinarene molecules of the capsule, and the inclusion of the tetramethylammonium cation in the calix[4]arene cavity.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Effect of varying bases on preferential crystallization of C-methylresorcin[4]arene and calix[6]arene

Preferential crystallization from a mixture of C-methylresorcin[4]arene (RsC1) and calix[6]arene (Calix6) in the presence of different bases has been investigated. In the presence of pyridine, a boat conformer of RsC1 crystallizes, whereas in the presence of triethylamine, Calix6 crystallizes in a symmetrically distorted conformation. The packing arrangements of the macrocycles show discrete solvent pockets for calixarenes and channels for resorcinarenes.     

Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

Liquid crystals based on calix[4]arene Schiff bases

New liquid crystals based on calix[4]arene Schiff base were prepared by the reaction of tetraamino-calix[4]arene with aldehydes (4-hydroxy benzaldehyde, 2-vanillin, 4-vanillin and 2-hydroxy naphthaldehyde). Dielectric investigations on a magnetically oriented sample forming N, SmA, and SmC phases were carried out. The dielectric constant (ε’ and ε”) and dielectric loss (tan δ) have been determined as a function of frequency (20 Hz–2 MHz). The synthesized derivatives were purified and characterized by FT-IR, ¹H-NMR, ¹³C-NMR and MALDI-TOF MS. All the synthesized compounds were investigated for liquid crystalline properties using DSC (Differential Scanning Calorimetry), DTA (Differential Thermal Analysis) and POM (Polarizing Optical Microscopy) attached with a hot stage. They generally exhibited nematic and typical fanlike or mosaic texture, which suggest the ordered smectic mesophases. Compounds were found to adopt a specific molecular structure due to the rigid bowl like calix[4]arene core, i.e., a cone-like structure with mesogenic units aligned within the molecule.     

Preferential recognition of zinc ions through a new anthraquinonoidal calix[4]arene

A novel anthraquinonoidal calix[4]arene derivative was designed and synthesized for the preferential recognition of biologically important zinc in preference to prominently similar cadmium ions and other metal ions via quenching of fluorescence intensity. The stoichiometry of host guest complexation has been determined to be 1:1. The fluorescence changes associated with the recognition event may be attributed to the interaction of zinc ions with the nitrogenous functionality attached at the lower rim of calix[4]arene cavity which allows spatial disposition of the anthraquinonoid segments.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Electrochemical oxidation of a tetraester calix[4]arene

The electrochemical oxidation of tetraethyl ester p-tert-butyl calix[4]arene 1 was observed in acetonitrile solution at a platinum electrode, using either cyclic or square wave voltammetry. The oxidation occurred in a number of processes, with the lowest, process I at a peak potential of 1.10 V vs. Ferrocene, being the best defined response. This was attributed to the one-electron oxidation of the aryl ether functionality present in the calixarene and so should provide a route to the electrochemical detection of calixarenes in non-aqueous mixtures. The oxidation behaviour was dependent on the presence of alkali metal cations in solution. Shifts in the oxidation potentials observed were in good agreement with the order of selectivity for the alkali metal cations.