Reactions of NO2 with BaO/Pt(111) model catalysts: the effects of BaO film thickness and NO2 pressure on the formation of Ba(NOx)2 species

The adsorption and reaction of NO(2) on BaO (<1, ～3, and >20 monolayer equivalent (MLE))/Pt(111) model systems were studied with temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRAS) under ultra-high vacuum (UHV) as well as elevated pressure conditions. NO(2) reacts with sub-monolayer BaO (<1 MLE) to form nitrites only, whereas the reaction of NO(2) with BaO (～3 MLE)/Pt(111) produces mainly nitrites and a small amount of nitrates under UHV conditions (P(NO(2))≈ 1.0 × 10(-9) Torr) at 300 K. In contrast, a thick BaO (>20 MLE) layer on Pt(111) reacts with NO(2) to form nitrite-nitrate ion pairs under the same conditions. At elevated NO(2) pressures (≥1.0 × 10(-5) Torr), however, BaO layers at all these three coverages convert to amorphous barium nitrates at 300 K. Upon annealing to 500 K, these amorphous barium nitrate layers transform into crystalline phases. The thermal decomposition of the thus-formed Ba(NO(x))(2) species is also influenced by the coverage of BaO on the Pt(111) substrate: at low BaO coverages, these species decompose at significantly lower temperatures in comparison with those formed on thick BaO films due to the presence of a Ba(NO(x))(2)/Pt interface where the decomposition can proceed at lower temperatures. However, the thermal decomposition of the thick Ba(NO(3))(2) films follows that of bulk nitrates. Results obtained from these BaO/Pt(111) model systems under UHV and elevated pressure conditions clearly demonstrate that both the BaO film thickness and the applied NO(2) pressure are critical in the Ba(NO(x))(2) formation and subsequent thermal decomposition processes.     

Tracking thermally-activated transformations in a nanostructured metal/oxide/metal system

We present experimental and theoretical evidence of sequential redox processes and structural transformations occurring by increasing temperature in a metal/oxide/metal system obtained via deposition of Fe atoms onto a z'-TiO(1.25)/Pt(111) ultrathin film in UHV. The initial reduction of the z'-TiO(x) phase by Fe at room temperature is followed by Fe diffusion and partial penetration into the substrate at intermediate temperatures. This triggers the formation of a bi-component material in which mixed FeO/TiO(2) nanoislands coexist on a h-TiO(1.14) ultrathin film, notably restructured (from rectangular to hexagonal) and reduced (from Ti : O = 1 : 1.25 to 1 : 1.14) with respect to the original TiO(1.25) phase. Further heating recovers the pristine z'-TiO(x) phase while Fe completely dissolves into the substrate.     

Adlayer of hydroquinone on Pt(111) in solution and in a vacuum studied by STM and LEED

Hydroquinone (HQ) adlayers were formed on Pt(111) in HF solution and in a vacuum. By using scanning tunneling microscopy (STM) in solution, it was revealed that HQ formed an ordered structure on Pt(111) with a strong attractive interaction between two adjacent hydroxyl groups in neighboring HQ molecules. After the sample was transferred into a vacuum, low-energy electron diffraction (LEED) measurement was performed, which showed that the (2.56 x 2.56)R16 degrees incommensurate structure of the HQ adlayer was formed in solution. The HQ adlayer on Pt(111) was formed also by vapor deposition, and the identical (2.56 x 2.56)R16 degrees adlayer structure was found by LEED and STM in a vacuum.     

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

Pressure-dependent Ni-O phase transitions and Ni oxide formation on Pt(111): an in situ STM study at elevated temperatures

Growth, atomic structure and O2 partial pressure dependent phase transitions of Ni-O structures and thin NiO films on Pt(111) have been studied using scanning tunnelling microscopy (STM), low-energy electron diffraction (LEED), and Auger electron spectroscopy (AES). In situ STM experiments were performed during film growth by reactive metal deposition at elevated temperatures (400-550 K) and variable O2 pressure. Depending on the substrate temperature, one-dimensional network-like Ni-O structures and islands with (7x1) and (4x2) reconstructions are formed during the initial stages of growth. These structures transform reversibly to a (2x2) reconstruction in a narrow O2 pressure range of 1.5-2x10(-6) mbar and can be monitored by in situ STM. Upon reduction of the O2 pressure to <10(-10) mbar pseudomorphic Ni monolayers are obtained. The defect-free ordering of Ni atoms on Pt(111) in a single stacking domain indicates an O-surfactant induced growth mode. The structural properties of the O2 pressure-dependent Ni-O phases are discussed in a simple model assuming NiO(001)-like atomic arrangements in the adsorbate overlayer. At higher coverage stable (111)-oriented NiO islands grow in a three-dimensional mode.     

Surface investigation of intermetallic PdGa(111)

The intermetallic PdGa is a highly selective and potent catalyst in the semihydrogenation of acetylene, which is attributed to the surface stability and isolated Pd atom ensembles. In this context PdGa single crystals of form B with (111) orientation were investigated by means of X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), scanning tunneling microscopy (STM), X-ray photoelectron diffraction (XPD), and low-energy electron diffraction (LEED) to study the electronic and geometric properties of this surface. UPS and thermal desorption spectroscopy (TDS) were used to probe the chemisorption behavior of CO. The PdGa(111) surface exhibits a (1 × 1) LEED and a pronounced XPD pattern indicating an unreconstructed bulk-truncated surface. Low-temperature STM reveals a smooth surface with a (1 × 1) unit cell. No segregation occurs, and no impurities are detected by XPS. The electronic structure and the CO adsorption properties reveal PdGa(111) to be a bulk-truncated intermetallic compound with Pd-Ga partial covalent bonding.     

Pt(111) 表面上表层 Fe (FeO) 结构和次表层 Fe 结构的可控转变

 利用扫描隧道显微镜 (STM) 和 X 射线光电子能谱 (XPS) 对 Pt(111) 表面制备的 Fe 单层薄膜及其在不同环境气氛条件下的多种结构进行了研究. 在温度为 487 K 的 Pt(111) 表面制备出了完整的 Fe 单层薄膜Fe/Pt(111). 对 Fe/Pt(111) 依次升高温度进行超高真空退火, STM 和 XPS 结果表明退火温度高于 800 K 时, 表面 Fe 原子扩散到次表层区域, 形成次表层 Fe 结构Pt/Fe/Pt(111). Pt/Fe/Pt(111) 在 O2 氧化气氛中经 850 K 退火可转变成表面 FeO 薄膜FeO/Pt(111). FeO/Pt(111) 结构在温和的 H2 还原气氛中 (600 K) 转变成表面 Fe 结构, 进一步的还原处理 (800 K) 则可以重新生成 Pt/Fe/Pt(111). 控制样品的环境气氛在 O2 和 H2 之间切换, 使得表面 Fe (FeO) 和次表面 Fe 可以重复地转变. 本研究实现了多种 Fe-Pt 表面结构的可控制备, 可为合理地设计高效、价廉的催化剂提供借鉴.     

Ultrathin wagon-wheel-like TiOx phases on Pt(111): a combined low-energy electron diffraction and scanning tunneling microscopy investigation

Ultrathin ordered titanium oxide films on a Pt(111) surface have been prepared by reactive deposition and characterized by low-energy electron diffraction and scanning tunneling microscopy (STM). According to the postdeposition annealing condition, three different phases have been prepared which show a wagon-wheel-like (hereafter ww) morphological pattern. Two of them can be prepared as single phases (w- and w'-TiO(x)) and one (w(int)-TiO(x)) as a mixed phase which always coexists with at least one of the other two phases. All of them are formed by a Ti-O bilayer, where the Ti atoms are located at the interface with the substrate, but they show a rather distinct STM ww pattern. The experimental STM contrast has been discussed on the basis of a Moiré-like model, i.e., as deriving from a modulation of the Ti occupancy of the different substrate sites (i.e., hollow, bridge and on-top sites). The major part of the STM data can be easily interpreted on the basis of this simplified model.     

Tellurium adatoms as an in-situ surface probe of (111) two-dimensional domains at platinum surfaces

Irreversibly adsorbed tellurium has been studied as a probe to quantify ordered domains in platinum electrodes. The surface redox process of adsorbed tellurium on the Pt(111) electrode and Pt(111) stepped surfaces takes place around 0.85 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the tellurium atoms involved in the redox process are only those deposited on the (111) terrace sites. Moreover, the corresponding charge density is proportional to the number of sites on (111) ordered domains (terraces) that are, at least, three atoms wide. Hence, this charge density can be used to measure the number of (111) terrace sites on any given platinum sample. Structural information about tellurium adsorption is obtained from atomic-resolution STM images for the Pt(111) and Pt(10, 10, 9) electrodes. A rectangular structure (2 x radical 3) and a compact hexagonal structure (11 x 8) were identified. However, the redox peak for adsorbed tellurium on (100) domains at 1.03 V overlaps with peaks arising from steps and (110) sites. Therefore, it cannot be used without problems for the determination of (100) sites on a platinum sample. On the (100) terraces, the surface structure of the adsorbed tellurium is c(2 x 2), as revealed by STM. Finally, tellurium irreversible adsorption has been used to estimate the number of (111) ordered domains terrace sites on different polycrystalline platinum samples, and the results are compared to those obtained with bismuth irreversible adsorption.     

The structure and crystallization of thin water films on Pt(111)

When water is adsorbed on Pt(111) above 135 K several different ice structures crystallize, depending on the thickness of the ice layer. At low coverage water forms extended islands of ice with a (square root(37) x square root(37))R25(o) unit cell, which compresses as the monolayer saturates to form a (square root(39) x square root(39))R16(o) structure. The square root(39) low-energy electron diffraction (LEED) pattern becomes more intense as the second layer grows, remaining bright for films up of 10-15 layers and then fading and disappearing for films more than ca. 40 layers thick. The ice multilayer consists of an ordered square root(39) wetting layer, on which ice grows as a crystalline film which progressively loses its registry to the wetting layer. Ice films more than ca. 50 layers thick develop a hexagonal LEED pattern, the entire film and wetting layer reorienting to form an incommensurate bulk ice. These changes are reflected in the vibrational spectra which show changes in line shape and intensity associated with the different ice structures. Thin amorphous solid water films crystallize to form the same phases observed during growth, implying that these structures are thermodynamically stable and not kinetic phases formed during growth. The change from a square root(39) registry to incommensurate bulk ice at ca. 50 layers is associated with a change in crystallization kinetics from nucleation at the Pt(111) interface in thin films to nucleation of incommensurate bulk ice in amorphous solid water films more than 50 layers thick.     

A new type of strong metal-support interaction and the production of H2 through the transformation of water on Pt/CeO2(111) and Pt/CeO(x)/TiO2(110) catalysts

The electronic properties of Pt nanoparticles deposited on CeO(2)(111) and CeO(x)/TiO(2)(110) model catalysts have been examined using valence photoemission experiments and density functional theory (DFT) calculations. The valence photoemission and DFT results point to a new type of "strong metal-support interaction" that produces large electronic perturbations for small Pt particles in contact with ceria and significantly enhances the ability of the admetal to dissociate the O-H bonds in water. When going from Pt(111) to Pt(8)/CeO(2)(111), the dissociation of water becomes a very exothermic process. The ceria-supported Pt(8) appears as a fluxional system that can change geometry and charge distribution to accommodate adsorbates better. In comparison with other water-gas shift (WGS) catalysts [Cu(111), Pt(111), Cu/CeO(2)(111), and Au/CeO(2)(111)], the Pt/CeO(2)(111) surface has the unique property that the admetal is able to dissociate water in an efficient way. Furthermore, for the codeposition of Pt and CeO(x) nanoparticles on TiO(2)(110), we have found a transfer of O from the ceria to Pt that opens new paths for the WGS process and makes the mixed-metal oxide an extremely active catalyst for the production of hydrogen.     

Platinum nanofilm formation by EC-ALE via redox replacement of UPD copper: studies using in-situ scanning tunneling microscopy

The growth of Pt nanofilms on well-defined Au(111) electrode surfaces, using electrochemical atomic layer epitaxy (EC-ALE), is described here. EC-ALE is a deposition method based on surface-limited reactions. This report describes the first use of surface-limited redox replacement reactions (SLR(3)) in an EC-ALE cycle to form atomically ordered metal nanofilms. The SLR(3) consisted of the underpotential deposition (UPD) of a copper atomic layer, subsequently replaced by Pt at open circuit, in a Pt cation solution. This SLR(3) was then used a cycle, repeated to grow thicker Pt films. Deposits were studied using a combination of electrochemistry (EC), in-situ scanning tunneling microscopy (STM) using an electrochemical flow cell, and ultrahigh vacuum (UHV) surface studies combined with electrochemistry (UHV-EC). A single redox replacement of upd Cu from a PtCl(4)(2-) solution yielded an incomplete monolayer, though no preferential deposition was observed at step edges. Use of an iodine adlayer, as a surfactant, facilitated the growth of uniformed films. In-situ STM images revealed ordered Au(111)-(square root 3 x square root 3)R30 degrees-iodine structure, with areas partially distorted by Pt nanoislands. After the second application, an ordered Moiré pattern was observed with a spacing consistent with the lattice mismatch between a Pt monolayer and the Au(111) substrate. After application of three or more cycles, a new adlattice, a (3 x 3)-iodine structure, was observed, previously observed for I atoms adsorbed on Pt(111). In addition, five atom adsorbed Pt-I complexes randomly decorated the surface and showed some mobility. These pinwheels, planar PtI(4) complexes, and the ordered (3 x 3)-iodine layer all appeared stable during rinsing with blank solution, free of I(-) and the Pt complex (PtCl(4)(2-)).     

Zn adsorption on Pd(111): ZnO and PdZn alloy formation

The adsorption and thermal desorption of Zn and ZnO on Pd(111) was studied in the temperature range between 300 and 1300 K with TDS, LEED, and CO adsorption measurements. At temperatures below 400 K, multilayer growth of Zn metal on the Pd(111) surface takes place. At a coverage of 0.75 ML of Zn, a p(2 x 2)-3Zn LEED structure is observed. Increasing the coverage to 3 ML results in a (1 x 1) LEED pattern arising from an ordered Zn multilayer on Pd(111). Thermal desorption of the Zn multilayer state leads to two distinct Zn desorption peaks: a low-temperature desorption peak (400-650 K) arising from upper Zn layers and a second peak (800-1300 K) originating from the residual 1 ML Zn overlayer, which is more strongly bound to the Pd(111) surface and blocks CO adsorption completely. Above 650 K, this Zn adlayer diffuses into the subsurface region and the surface is depleted in Zn, as can be deduced from an increased amount of CO adsorption sites. Deposition of >3 ML of Zn at 750 K leads to the formation of a well-ordered Pd-Zn alloy exhibiting a (6 x 4 square root 3/3)rect. LEED structure. CO adsorption measurements on this surface alloy indicate a high Pd surface concentration and a strong reduction of the CO adsorption energy. Deposition of Zn at T > 373 K in 10(-6) mbar of O2 leads to the formation of an epitaxial (6 x 6) ZnO overlayer on Pd(111). Dissociative desorption of ZnO from this overlayer occurs quantitatively both with respect to Zn and O2 above 750 K, providing a reliable calibration for both ZnO, Zn, and oxygen coverage.     

甲醇在铂修饰的氧化钛电极上电催化氧化行为的研究

运用电化学方法评价了电化学阴极还原-阳极氧化两步法制得的以钛为基体的铂修饰的钛氧化物(Pt-TiO_x/Ti)电极对甲醇电催化氧化的性能,结果表明,制得的修饰电极对甲醇氧化呈现了很高的电催化活性和好的稳定性.通过X光电子能谱(XPS)、扫描隧道显微镜(STM)和现场傅立叶变换红外(FTIR)反射光谱等技术,发现修饰电极对甲醇氧化具有高的电催化性能,可归属于纳米级Pt粒子在TiO_x中的高度分散及由于Pt和TiO_x的相互作用,使电极表面对甲醇氧化中间产物CO的吸附量大大降低.     

Formation of hydrogen-bridged cytosine dimers on Cu(110)

Cytosine was adsorbed onto a Cu(110) surface under UHV conditions. Annealing to 370 K resulted in the formation of a (6 x 6)gg low energy electron diffraction (LEED) pattern, even at submonolayer coverages. Examination of this structure with scanning tunneling microscopy (STM) revealed islands of zigzag chains at low coverages and large ordered domains at monolayer saturation. Further annealing to 480 K initiated a phase transition to a (6 x 2)gg structure observed both by LEED and STM. High resolution electron energy loss spectroscopy spectra for both overlayer structures exhibited mainly in-plane modes suggesting upright/tilted species on the surface. Based on the experimental data and supported by density functional theory calculations, a model is proposed for the (6 x 2)gg structure, which involves the formation of deprotonated hydrogen bridge-bonded cytosine dimers, adsorbed through the oxygen atoms.     

Formation, atomic distribution and mixing energy in two-dimensional Pd(x)Ag(1-x) surface alloys on Pd(111)

The formation and atom distribution in two-dimensional Pd(x)Ag(1-x)/Pd(111) monolayer surface alloys were studied by high resolution scanning tunnelling microscopy (STM) with chemical contrast. From short-range order (SRO) parameters, we calculate preferences for like or unlike nearest neighbours to elucidate the mixing behaviour of the two components for various sub monolayer Ag surface contents. In the regime of low Ag surface contents (<40% Ag), the system shows a weak tendency towards phase separation, high Ag coverages (>60% Ag) result in a disperse distribution of the atoms in the surface. Effective pair interactions (EPIs) were derived by comparing the measured distribution with distributions obtained using Monte Carlo (MC) simulations. From the EPIs, we derived a function for the mixing energy, which can describe the change from clustering to a disperse distribution. The effects of the resulting surface atom distributions and of the Ag coverage dependent surface mixing/demixing on catalytic reactions are discussed.     

Structural evolution of perfluoro-pentacene films on Ag(111): transition from 2D to 3D growth

The structural evolution and thermal stability of perfluoro-pentacene (PF-PEN) thin films on Ag(111) have been studied by means of low-temperature scanning tunnelling microscopy (STM), low-energy electron diffraction (LEED), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). Well-defined monolayer films can be prepared by utilizing the different adsorption energy of mono- and multilayer films and selectively desorbing multilayers upon careful heating at 380 K, whereas at temperatures above 400 K, a dissociation occurs. In the first monolayer, the molecules adopt a planar adsorption geometry and form a well-ordered commensurate (6 × 3) superstructure where molecules are uniformly oriented with their long axis along the <110> azimuth. This molecular orientation is also maintained in the second layer, where molecules exhibit a staggered packing motif, whereas further deposition leads to the formation of isolated, tall islands. Moreover, on smooth silver surfaces with extended terraces, growth of PF-PEN onto beforehand prepared long-range ordered monolayer films at elevated temperature leads to needle-like islands that are uniformly aligned at substrate steps along <110> azimuth directions.     

Hierarchical self-assembly of designed 2 x 2-alpha-helix bundle proteins on Au(111) surfaces

Self-assembled monolayers of biomolecules on atomically planar surfaces offer the prospect of complex combinations of controlled properties, e.g., for bioelectronics. We have prepared a novel hemi-4-alpha-helix bundle protein by attaching two alpha-helical peptides to a cyclo-dithiothreitol (cyclo-DTT) template. The protein was de novo designed to self-assemble in solution to form a 4-alpha-helix bundle, whereas the disulfide moiety enables the formation of a self-assembled monolayer on a Au(111) surface by opening of the disulfide, thus giving rise to a two-step self-assembly process. The 2 x 2-alpha-helix bundle protein and its template were studied by X-ray photo electron spectroscopy (XPS), electrochemical methods, and electrochemical in situ scanning tunneling microscopy (in situ STM). XPS showed that the cyclo-DTT opens on adsorption to a gold surface with the integrity of the 2 x 2-alpha-helix bundle proteins retained. The surface properties of the DTT and 2 x 2-alpha-helix bundle protein adlayer were characterized by interfacial capacitance and impedance techniques. Reductive desorption was used to determine the coverage of the adlayers, giving values of 65 and 16 muC cm(-2) for DTT and 2 x 2-helix, respectively. The 2 x 2-alpha-helix bundle protein adlayers were imaged by in situ STM. The images indicated a dense monolayer according with the voltammetric data. No long-range order could be detected, but two clearly distinct STM contrasts were assigned to 2 x 2-alpha-helix bundle protein molecules oriented in parallel and antiparallel conformations. The template molecule DTT alone forms highly ordered 30-40 nm domains, giving an adlayer density which agreed well with the coverage determined by voltammetry. This could be exploited in STM imaging of mixed DTT/2 x 2-alpha-helix bundle protein monolayers, with clearly distinct STM patterns of the two components.     

Ultrathin metals films on W(221): Structure, electronic properties and reactivity

Nanoscale pyramidal facets with (211) faces are formed when W(111) surface is covered by monolayer film of certain metals (including Pt, Pd and Au) and annealed to T ≥ 750 K. In the present work, we focus on the structure, electronic properties and reactivity of planar W(211) covered by ultrathin films of platinum and palladium. The measurements include soft X-ray photoelectron spectroscopy using synchrotron radiation, Auger electron spectroscopy, low energy electron diffraction (LEED) and thermal desorption spectroscopy. The metal film growth and evolution during annealing has been investigated for coverages ranging from 0 to 8 monolayers. The films grow initially in a layer-by-layer mode at 300 K. LEED, Auger, and Surface Core Level Shift (SCLS) measurements reveal that for coverages of one monolayer, the films are stable up to temperatures at which desorption occurs. In contrast, at higher coverages, SCLS data indicate that surface alloys are formed upon annealing films of Pt and Pd; surface alloy formation is not seen for Au overlayers. These findings are discussed in terms of structural and electronic properties of these bimetallic systems. Relevance to catalytic properties for acetylene cyclization over Pd/W(211) is also discussed.