Isolation,purification, and study of some properties of the extracellular lignin peroxidases of the wood-destroying fungusPleurotus ostreatus

Abstact Two bands with lignin peroxidase activity have been detected by isoelectric focusing in a total enzyme preparation obtained from a 15-day filtrate of the culture liquid of the fungusPleurotus ostreatus by fractionation with ammonium sulfate. Two homogeneous forms of the enzymes — LGP-I and LGP-II — have been obtained by gel filtration on Sephadex G-100, ion-exchange chromatography on DEAF-Toyopearl 650 M gel, and rechromatography on Sephadex G-75, and also by electrophoresis in PAAG. The specific activities of the purified lignin peroxidases LGP-I and LGP-H amounted to 36.5 and 54.3 units/mg, their degrees of purification being 8.7 and 12.9, respectively. The molecular masses of LGP-I and LGP-II, determined by electrophoresis in PAAG in the presence of Na-DS and by gel filtration on TSK HW–65 gel were 42–44 and 61–63 kDa. The isoelectric points of LGP-I and LGP-II were 3.4 and 4.1, their pH optima 2.7 and 3.4, and the, temperatures of their optimum enzymatic action 28 and 34°C, respectively. The isoenzymes differed from one another substantially with respect to pH stability and resistance to heat. The values of K_M determined from the rates of hydrolysis of the substrate by the enzymes in the presence of H₂O₂ at pH 3.7 were 0.09 mM for LGP-I and 0.07 mM for LGP-II. The values of K_M with respect to veratryl alcohol, determined by the Lineweaver—Burk method, were 0.117 mM for LGP-II and 0.132 mM for LGP-II.Institute of Microbiology, Academy of Sciences of the Republic of Uzbekistan, Tashkent, fax (3712) 41 71 29. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 394–402, May–June, 1996. Original article submitted November 11, 1994.     

Purification and characterisation of α-amylase produced by mutant strain of Aspergillus oryzae EMS-18

α-Amylase produced by a mutant strain of Aspergillus oryzae EMS-18 has been purified to homogeneity as judged by sodium dodecyle sulphate polyacrylamide gel electrophoresis (SDS-PAGE). The enzyme was purified by using 70% ammonium sulphate precipitation followed by anion exchange chromatography on DEAE-Sephadex column and gel filtration on Sephadex G-100. An enzyme purification factor of 9.5-fold was achieved with a final specific activity of 1987.7 U/mg protein and overall yield of 23.8%. The molecular weight of purified α-amylase was estimated to be 48 kDa by SDS-PAGE. The purified enzyme revealed an optimum assay temperature and pH 40°C and 5.0, respectively. Except Ca⁺⁺ all other metal ions such as Mg, Mn, Na, Zn, Ni, Fe, Cu, Co and Ba were found to be inhibitory to enzyme activity.     

Synergistic extraction behavior of samarium(III), europium(III) and dysprosium(III) with 1-nitroso-2-naphthol and 1,10-phenanthroline

The equilibrium extraction behavior of Sm(III), Eu(III) and Dy(III) from aqueous NaClO₄ solutions in the pH range of 4–9 at 0.1 M ionic strength into organic solutions of 1-nitroso-2-naphthol (HA) and 1,10-phenanthroline (Phen) has been studied. The equilibrium concentrations of Eu were assayed through the 344 keV photopeak of the¹⁵²Eu radiotracer used. The concentrations of Sm and Dy were measured by irradiating one mL portions of the organic extract and analyzing the 104 and 108 keV photopeaks of the short-lived neutron activation products,¹⁵⁵Sm and^165mDy, respectively. Quantitative extraction of Eu with 5×10^–2 M HA alone was obtained in the pH range of 6.7–7.8 with n-butanol, 7.4–8.5 with chloroform, 8.0–8.7 with ethyl acetate, 7.7–8.5 with isoamyl alcohol and 6.1–8.0 with methyl isobutyl ketone (MIBK). But, Eu was extracted only to a maximum of 78% and 83% in the pH range of 8.3–8.9 and 7.4–8.1 with carbon tetrachloride and xylene, respectively. The extraction of Sm and Dy were found quantitative in the pH range of 6.3–7.0 and 6.6–7.1, respectively, with 5×10^–2 M HA alone in MIBK solutions. The synergistic extraction of Eu was quantitative in the pH range of 6.6–9.8 with chloroform, 7.8–8.9 with ethyl acetate, 7.7–8.5 with isoamyl alcohol and 6.0–9.6 with MIBK when 1×10^–2 M each of HA and Phen were employed. Sm and Dy were quantitatively extracted into MIBK solutions containing 5×10^–2 M each of HA and Phen in the pH range 6.0–7.5 and 6.1–7.5, respectively. The distribution ratios of these lanthanides (Ln) were determined as a function of pH, and HA and Phen concentrations. The analysis of the data suggests that these Ln are extracted as LnA₃ chelates when HA alone is used. In the presence of HA and Phen, both LnA₃(Phen) and LnA₃(Phen)₂ adducts are formed only in the MIBK system while LnA₃(Phen) complexes are the predominant ones in all other solvent systems studied. The extraction constants and the adduct formation constants of these complexes have been calculated.     

Glucose biosensor based on glucose oxidase immobilized in sol–gel chitosan/silica hybrid composite film on Prussian blue modified glass carbon electrode

An improved amperometric glucose biosensor based on glucose oxidase immobilized in sol–gel chitosan/silica hybrid composite film, which was prepared from chitosan (CS) and methyltrimethoxysilane (MTOS), on the surface of Prussian blue (PB)-modified glass carbon electrode was developed. The film was characterized by FT-IR. Effects of some experimental variables such as ratio of CS to silica, buffer pH, temperature, and applied potential on the current response of the biosensor were investigated. The biosensor fabricated under optimal conditions had a linear response to glucose over the range 5.0×10^–5 to 2.6×10^–2 M with a correlation coefficient of 0.9948 and a detection limit of 8.0×10^–6 M based on S/N =3. The biosensor had a fast response time of less than 10 s, a high sensitivity of 420 nA mM^–1, a long-term stability of over 60 days, and a good selectivity. The apparent Michaelis–Menten constant K_m was found to be 3.2×10^–3 M. The activation energy for enzymatic reaction was calculated to be 21.9 kJ mol^–1. This method has been used to determine the glucose concentration in real human blood samples.     

Polarographic determination of uranium(VI) after salting-out extraction as 8-quinolinolate in acetonitrile

Summary Uranium(VI) can be extracted as its 8-quinolinolate into acetonitrile by means of salting-out with ammonium and sodium acetates, respectively; the metal oxinates extracted give a well-defined dc polarogram with E _1/2=–0.80V and a sharp square wave (sw) polarogram with E _p=–0.96V in the extract. The dc wave height and the sw peak current are directly proportional to the uranium(VI) concentration in the range of 6.0×10^–6 to 4.0×10^–4M at pH 6.7–10.0 and 8.0×10^–7 to 2.8×10^–5M at pH 10.5–11.0, respectively. A number of ions do not interfere in the presence of EDTA.

---

Polarographische Bestimmung von Uran(VI) nach Aussalz-Extraktion als 8-Hydroxychinolat mit Acetonitril

Zusammenfassung Uran(VI) kann durch Aussalzen mit Ammonium- bzw. Natriumacetat als Oxinat mit Acetonitril extrahiert werden. Das extrahierte Oxinat ergibt ein gut ausgebildetes Gleichstrompolarogramm mit E _1/2=–0,80 V bzw. ein scharfes square-wave-Polarogramm mit E _p=–0,96 V. Die Gleichstrom-Stufenhöhe bzw. der square-wave-Peakstrom sind der U(VI)-Konzentration im Bereich 6,0·10^–6-4,0· 10^–4M (pH 6,7–10,0) bzw. 8,0·10^–7-2,8·10 ^–5M (pH 10,5–11,0) direkt proportional. Durch Zusatz von EDTA kann eine Reihe von Störungen ausgeschaltet werden.

     

Chemical characterization of complexation behavior of pertechnetate with cysteine

The labeling behavior of cysteine with⁹⁹TcO ₄ ^– ion and/or^99mTcO ₄ ^– ion at different cysteine concentrations reductant and pH values has been studied by chromatography, and the labeling yield was calculated. Three major Tc-complexes, yellow, reddish brown and green can be separated by gel filtration chromatography (GFC). Thin layer chromatography (TLC), high performance liquid chromatography (HPLC) and ion-exchange chromatography (IC) were used to separate the complexes collected from GFC. The TLC, HPLC data show the pertechnetate accompanied with a yellow complex; the green and purple complex contain more than two complexes. Electrophoresis and IC data show that the complexes carry a negative charge. The conductivity, UV-VIS, flow beta-detector with HPLC and autoradiography are also applied to analyze complex formation.     

Purification and Biochemical Characterization of a New Protease Inhibitor from Conyza dioscoridis with Antimicrobial,Antifungal and Cytotoxic Effects

The main objective of the current study was the extraction, purification, and biochemical characterization of a protein protease inhibitor from Conyza dioscoridis. Antimicrobial potential and cytotoxic effects were also examined. The protease inhibitor was extracted in 0.1 M phosphate buffer (pH 6–7). Then, the protease inhibitor, named PDInhibitor, was purified using ammonium sulfate precipitation followed by filtration through a Sephadex G-50 column and had an apparent molecular weight of 25 kDa. The N-terminal sequence of PDInhibitor showed a high level of identity with those of the Kunitz family. PDInhibitor was found to be active at pH values ranging from 5.0 to 11.0, with maximal activity at pH 9.0. It was also fully active at 50 °C and maintained 90% of its stability at over 55 °C. The thermostability of the PDInhibitor was clearly enhanced by CaCl₂ and sorbitol, whereas the presence of Ca²⁺ and Zn²⁺ ions, Sodium taurodeoxycholate (NaTDC), Sodium dodecyl sulfate (SDS), Dithiothreitol (DTT), and β-ME dramatically improved the inhibitory activity. A remarkable affinity of the protease inhibitor with available important therapeutic proteases (elastase and trypsin) was observed. PDInhibitor also acted as a potent inhibitor of commercial proteases from Aspergillus oryzae and of Proteinase K. The inhibitor displayed potent antimicrobial activity against gram+ and gram- bacteria and against fungal strains. Interestingly, PDInhibitor affected several human cancer cell lines, namely HCT-116, MDA-MB-231, and Lovo. Thus, it can be considered a potentially powerful therapeutic agent.     

Cation exchange selectivity of some fission products on strongly acidic cation exchanger of sulfonic acid type-nitric acid system

Distribution coefficients of fission products in nitric acid for strongly acidic cation exchanger of sulfonic acid type with different cross-linking and structure were measured by a column method. Uptake of cationic fission products increases with resin cross-linking and decreases of nitric acid concentration. The distribution coefficient of the ion, [Kd_Mn+]^*, in a given system is expressed as log [Kd_Mn+]^*=B·log[Kd_Mn+]+A where [Kd_Mn+] is the distribution coefficient of the ion at 1M nitric acid for 10% crosslinked gel type cation exchanger, while A and B constants. Deviation from the above relation were observed for Y³⁺ and complex ions of ruthenium upward for macroporous type cation exchanger and downward for highly porous type cation exchanger. Upward deviation of Y³⁺ for 10% cross-linked gel type cation exchanger increased with concentration of nitric acid. Consequently, elution sequence varied from Y³⁺–Eu³⁺–Pm³⁺–Ce³⁺⁺ at 1M nitric acid to Eu³⁺–Pm³⁺–Y³⁺–Ce³⁺ for the same cation exchanger at 2M nitric acid. The same elution sequence, Eu³⁺–Pm³⁺–Y³⁺–Ce³⁺, was observed for 8% cross-linked gel type cation exchanger and 10% cross-linking macroporous type cation exchanger at 1M nitric acid.     

Rapid separation of212Pb−212Bi−208Tl by high-performance liquid ion chromatography

Fast radiochemical separation of carrier-free²¹²Pb–²¹²Bi–²⁰⁸Tl in radioactive equilibrium was performed using the HPLC technique with an ion-exchange column /ION-210 for cation exchange, ION-110 for anion exchange and C18 loaded with cation-exchange sites/. Optimal results are obtained with the ION-110 column.²⁰⁸Tl and²¹²Pb are eluted by 0.5M HCl in 2.5 and 5 min, respectively.²¹²Bi is recovered by elution with 1M HNO₃.     

Retention Behavior of Anti-Arrhythmic Drugs on the Chromolith Performance RP 18 Column. Liquid Chromatographic Determination of Mexiletine Hydrochloride

The retention behavior in liquid chromatography of a series of anti-arrhythmic drugs is described. Chromatographic analysis was performed on a Chromolith Performance ODS column with acetonitrile–phosphate buffer mixtures as mobile phases. The effects of the proportion of organic solvent (from 20 to 90%), phosphate buffer pH (from 2.73 to 7.5), flow rate (from 1 to 6 mL min^–1), and isocratic or gradient elution on the retention of the compounds was studied. Mexiletine hydrochloride was determined in the pure substance and in capsules by isocratic liquid chromatography with 20:80 (v/v) acetonitrile–0.007 M phosphate buffer, pH 3.0, as mobile phase at 2 mL min^–1. Methanol was found to be a suitable solvent for extraction of the active substance from capsules. The calibration plot was linear (r=0.9999) in the concentration range 1.0 to 6.0 g mL^–1. The proposed method is selective, precise (RSD=0.37%), and accurate (recovery=100.08%).Revised: 28 January and 2 March 2004     

An improved tungsten-188/rhenium-188 gel generator based on zirconium tungstate

An improved¹⁸⁸W-¹⁸⁸Re gel generator based on Zr tungstate is described. The influence of synthesis parameters and pre-treatment conditions on¹⁸⁸Re elution yields and the¹⁸⁸W breakthrough was studied with 0.15M aqueous solution of NaCl at pH 5.3 to 7.3 as well as with some organic solvents. An elution efficiency of 80% was achieved during 3 month of explotation with 0.15M NaCl at pH=6.3. The¹⁸⁸W breakthrough was 10^–4 to 10^–3%. The¹⁸⁸W breakthrough may be decreased to 10^–6% when converted into tandem generator with an alumina column. However,¹⁸⁸Re yields are reduced by 8–12% with a tandem generator.     

Isolation of protease B from cotton seeds

Protease B has been isolated from dormant cotton seeds by fractionation with ammonium sulfate, ion-exchange chromatography on CM-cellulose, and gel filtration through Acrilex P-10 and Sephadex G-75, with 128-fold purification. The enzyme exists in dimeric and monomeric forms. According to the results of gel filtration, their molecular weights are 72,000 and 36,000, respectively. The enzyme consists of a single polypeptide chain including sugars. The N-terminal amino acid of protease B is alanine. The enzyme possesses proteolytic activity in the pH range from 4 to 6.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 506–510, July–August, 1984.     

Preparation of strong anion-exchange chromatographic packings based on monodisperse polymeric beads and their application in the separation of biopolymers

A new hydrophilic strong anion-exchange (SAX) stationary phase for HPLC has been synthesized by chemical modification of macroporous 8.0-m monodisperse poly(glycidylmethacrylate-co-ethylenedimethacrylate) beads (P_GMA/EDMA). The stationary phase was evaluated in detail to determine its ion-exchange properties, separability, reproducibility, hydrophilicity, and the effect of column loading and pH on the separation and retention of proteins. It was found to have an ion-exchange chromatographic (IEC) retention mechanism. The highest dynamic protein loading capacity of the synthesized SAX packing for BSA was 22.6 mg g^–1. Five proteins were separated within 6.0 min using the synthesized SAX resin. The SAX resin was also used for rapid separation and purification of recombinant human stem cell factor (rhSCF) from a crude extract solution in only one step. The purity of the purified of rhSCF was >92.4%.     

Kinetics and mechanism of formation of square-planar copper(II) and nickel(II) complexes of ethylenebisbiguanide in aqueous acetate buffer media

Summary The kinetics of formation of square-planar Cu^II and Ni^II complexes of the quadridentate ligand, ethylenebisbiguanide, have been studied spectrophotometrically in aqueous HOAc–NaOAc buffer, at ionic strength 0.2 mol dm^–3, in the 25–35°C temperature range. The observed rate constants for the formation reactions are independent of pH (and of OAc^– concentration) in the pH range used (3.6–4.8 for Cu^II and 5.0–5.8 for Ni^II) where the product complexes form stoichiometrically, but show first-order dependence on the ligand concentration;i.e. k_obs=k_f[L]_total. At 25°C k_f values (dm³ mol^–1s^–1) are 35.2±0.4 for Cu^II and (8.4±0.1)×10^–3 for Ni^II. The mechanism of the reactions is discussed.     

Studies on mixed ligand complexes of samarium(III), europium(III) and dysprosium(III) with 1-nitroso-2-naphthol and trioctylphosphine oxide

The extraction behavior of Sm(III), Eu(III) and Dy(III) with 1-nitroso-2-naphthol (HA) and trioctylphosphine oxide (TOPO) in methyl isobutyl ketone (MIBK) from aqueous NaClO₄ solutions in the pH range 4–9 at 0.1M ionic strength has been studied. The equilibrium concentrations of Sm and Dy were measured using their short-lived neutron activation products,¹⁵⁵Sm and^165mDy, respectively. In the case of Eu, the concentrations were assayed through the^152,154Eu radiotracer. The distribution ratios of these elements were determined as a function of pH, 1-nitroso-2-naphthol and TOPO concentrations. The extractions of Sm, Eu and Dy were found to be quantitative with MIBK solutions in the pH range 5.9–7.5, 5.6–7.5 and 5.8–7.5, respectively. Quantitative extraction of Eu was also obtained between pH 5.8 and 8.8 with chloroform solutions. The results show that these lanthanides (Ln) are extracted as LnA₃ chelates with 1-nitroso-2-naphthol alone, and in the presence of TOPO as LnA₃(TOPO) and LnA₃(TOPO)₂ adducts. The extraction constants and the adduct formation constants of these complexes have been calculated.     

Organically modified silica gel and flame atomic absorption spectrometry: employment for separation and preconcentration of nine trace heavy metals for their determination in natural aqueous systems

A 5-formyl-3-(1′-carboxyphenylazo) salicylic acid-bonded silica gel (FCPASASG) chelating adsorbent was synthesized according to a very simple and rapid one step reaction between aminopropyl silica gel (APSG) and 5-formyl-3-(1′-carboxyphenylazo) salicylic acid (FCPASA) and its adsorption characteristics were studied in details. Nine trace metals viz.: Cd(II), Zn(II), Fe(III), Cu(II), Pb(II), Mn(II), Cr(III), Co(II) and Ni(II) can be quantitatively adsorbed by the adsorbent from natural aqueous systems at pH 7.0–8.0. The adsorbed metal ions can be readily desorbed with 1 M HNO₃ or 0.05 M Na₂EDTA. The distribution coefficient, K_d and the percentage concentration of the investigated metal ions on the adsorbent at equilibrium, C_M,_eqm % (Recovery, R%) were studied as a function of experimental parameters. The logarithmic values of the distribution coefficient, logK_d, are 3.7–6.4. Some foreign ions caused little interference in the preconcentration and determination of the investigated nine metals by flame atomic absorption spectrometry (AAS).The adsorption capacity of FCPASASG was 0.32–0.43 meq g⁻¹. C and N elemental analyses of the adsorbent (FCPASASG) allowed us to calculate a surface converge of 0.82 mmol g⁻¹. This value compares well with the best values reported for the azo compounds. The adsorbent and its formed metal chelates were characterized by IR (absorbance and/or reflectance) and UV spectrometry, potentiometric titrations and thermogravimetric analysis (TGA and DTG). The mode of chelation between the FCPASASG adsorbent and the investigated metal ions is proposed to be due to reaction of those metal ions with the salicylic and/or the carboxyphenylazo chelation centers of the FCPASASG adsorbent. Nanogram concentrations (0.07–0.14 ng ml⁻¹) of Cd(II), Zn(II), Fe(III), Pb(II), Cr(III), Mn(II), Cu(II), Co(II) and Ni(II) can be determined reliably with a preconcentration factor of 100.     

Behaviour of Salbutamol on Diol Normal-Phase Column

Summary The behaviour of salbutamol, a sympathomimetic amine-and catecholamine-like substance, was studied on Diol normal-phase column. The possibility for controlled retention of salbutamol using methanol containing mobile phase was proved. The mobile phase consisted of buffer (0.05 M H₃PO₄, pH 5.0 with TEA) – methanol (15:85 v/v). The effects of organic solvent, pH, ion power of the buffer and the length of amine alkyl chain in buffer were studied. The retention of salbutamol increased significantly with the increase of methanol content above 80%. At pH values between 3.5 and 7.5 the retention of salbutamol varied from 2.16 to 2.36 only. The limit of quantitation was 0.30 ng · mL^–1. The investigations confirm the H-bonding retention mechanism.     

Isolation of a protein with diaphorase activity from cotton seeds and a study of some of its properties

The diaphorase activities of the proteins of different varieties of two species of cotton plant —Gossypium hirsutum L. andG. barbadense L. — have been studied. It has been shown that the proteins of the seeds of the cotton plantG. barbadense possess a low diaphorase activity in comparison with the proteins of the seeds of aG. hirsutum plant. On an electrophoretogram of the proteins, diaphorase activity was localized in two zones, with R_f 0.45 and 0.70. The diaphorase with R_f 0.45 has been isolated by electrophoresis in polyacrylamide gel (PAAG) and some of its properties have been studied. The diaphorase isolated oxidizes NADH and NADPH in the presence of various artificial electron Acceptors, and has two pH optima (at 7.20 and 8.70) and is characterized by relative thermal stability (at 80°C). In the case of the total extract, brief boiling does not lead to inactivation of the enzyme, which shows the presence in cotton seeds of a factor stabilizing this diaphorase. The molecular weight of the proteins isolated, according to gel filtration on Sephadex G-150, is 59,000, and from the results of SDS-PAAG electrophoresis it is 13,600, which shows a tetrameric structure of the enzyme.Institute of Experimental Plant Biology, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 416–421, May–June, 1987.     

Purification of the intracellular triacylglycerol lipase ofOospora lactis

A method for the isolation of homogeneous triacylglycerol hydrolase from the mycelium of the fungusOospora lactis is described. The homogeneity of the enzyme has been shown by gel filtration through Sephadex G-100, by ultracentrifugation, and by disc electrophoresis in polyacrylamide gel. Some properties of the enzyme have been studied: molecular weight, 43,000; optimum action temperature, 35–37°C; pH optimum, 7.5.     

Preparation and properties of immobilized pig kidney aminoa cylase and optical resolution of N-acyl-dl-alanine

Aminoacylase (EC 3.5.1.14) was immobilized into DEAE-Sephadex A-25 by ion-exchange absorption for optical resolution of N-acyl-dl-alanine. The effects of pH, temperature, and Co²⁺ concentration on the activity of free and immobilized enzymes were in vestigated along with the operational and the thermal stability of the immobilized enzyme. The immobilized enzyme retained high catalytic activity. The optimum pH and temperature for the hydrolysis of N-acyl-l-alanine in the dl-isomer mixture were 8.0 and 65°C, respectively. Co²⁺ was an activator for the immobilized enzyme in a similarroleas for the free enzyme. Nosignificant loss of activity was observed for at least 300 h of continuous operation. The yield of l-alanine was about 70% of the theoretical yield. The immobilized aminoacylase column decayed over a very long period of operation, but could be completely reactivated by regeneration.