Practical routes to the triarylsulfonyl chloride intermediate of a β3 adrenergic receptor agonist

A β₃ adrenergic receptor agonist was prepared on a multi-kilogram scale in high yield and purity via a convergent synthesis. A key intermediate in this synthesis was an arylthiazolylbenzenesulfonyl chloride. The triaryl segment of this sulfonyl chloride was assembled at the thiazole ring via coupling of α-haloketone and thiobenzamide precursors (Hantzsch synthesis). Three strategies for introducing the para-sulfonyl chloride moiety were developed and evaluated. The sulfonation/chlorination and diazotization/chlorosulfonylation routes were found the most efficient.     

Synthesis of sphingomyelin difluoromethylene analogue

As a new sphingomyelinase inhibitor, a novel sphingomyelin CF₂ analogue was designed and synthesized. One key step of this synthesis is the very mild hydrolysis of the oxazolidinone ring, a suitable intermediate for the introduction of a diethyl difluoromethylphosphonate group, by utilizing the characteristic electron withdrawing nature of the nosyl group at the oxazolidinone ring in an alcoholic solvent to produce the corresponding carbonate attaching at the secondary hydroxy group. The synthesized CF₂ analogue inactivated toward B. cereus sphingomyelinase with nearly the same attitude as the nitrogen analogue that we previously reported.     

Stereoselective total synthesis of (−)-brevisamide

The stereoselective total synthesis of (−)-brevisamide, a novel marine cyclic ether alkaloid isolated from dinoflagellate karenia brevis is described. The key steps involved in this synthesis are the Sharpless asymmetric epoxidation and regioselective ring opening of chiral epoxide by Gilman's reagent. The tetrahydropyran core has been constructed by an intramolecular S_N2 cyclisation.     

Total synthesis of (+)-blastmycinone and formal synthesis of (+)-antimycin A3b

The formal synthesis of (+)-antimycin A_3b and the total synthesis of (+)-blastmycinone were achieved using, as a key step, a method developed by us for the synthesis of 2-methyl-1,3-diols via Ti(III)-mediated diastereo- and regioselective opening of trisubstituted 2,3-epoxy alcohols, to carry out the stereoselective construction of the hydroxy-acid segment. An interesting intramolecular radical translocation took place during the epoxide opening process transforming its vicinal PMB-ether in situ, into an ‘1,2-O-(p-methoxy)benzylidene’ ring.     

The first construction of a 3,6-bridged ellagitannin skeleton with C4/B glucose core; synthesis of nonamethylcorilagin

The synthesis of nonamethylcorilagin is described. In the synthesis, the intramolecular Ullmann coupling afforded the (R)-hexahydroxydiphenoyl part--a characteristic bridge structure of the target molecule--when the glucopyranose ring was opened in advance. This synthesis demonstrates the first synthetic approach to a 3,6-bridged ellagitannin skeleton whose conformation of the d-glucose core is ¹C₄ or skew boat.     

The Highly Efficient Synthesis of 1,2-Disubstituted Benzimidazoles Using Microwave Irradiation

The benzimidazole ring of the heterocyclic pharmacophores is one of the most widespread and studied systems in nature. The benzimidazole derivative synthesis study is a crucial point for the development of a clinically available benzimidazole-based drug. Here, we report a simple microwave assisted method for the synthesis of 1,2-disubstituted benzimidazoles. The combination of the molar ratio of N-phenyl-o-phenylenediamine:benzaldehyde (1:1) using microwave irradiation and only 1% mol of Er(OTf)₃ provides an efficient and environmental mild access to a diversity of benzimidazoles under solvent-free conditions. The proposed method allows for the obtainment of the desired products in a short time and with very high selectivity.     

Structural studies on a high-pressure polymorph of NaYSi2O6

High-pressure synthesis experiments in the system Na₂O-Y₂O₃-SiO₂ revealed the existence of a previously unknown polymorph of NaYSi₂O₆ or Na₃Y₃[Si₃O₉]₂ which was quenched from 3.0 GPa and 1000 °C. Structural investigations on this modification have been performed using single-crystal X-ray diffraction data collected at ambient conditions. Furthermore, unpolarized micro-Raman spectra have been obtained from single-crystal material. The high-P modification of NaYSi₂O₆ crystallizes in the centrosymmetric space group C2/c with 12 formula units per cell (a=8.2131(9) Å, b=10.3983(14) Å, c=17.6542(21) Å, β=100.804(9)°, V=1481.0(3) Å³, R(|F|)=0.033 for 1142 independent observed reflections) and belongs to the group of cyclo-silicates. Basic building units are isolated three-membered [Si₃O₉] rings located in layers parallel to (010). Within a single layer the rings are concentrated in strings parallel to [100]. The sequence of directedness of up (U) or down (D) pointing tetrahedra of a single ring is UUU or DDD, respectively. Stacking of the layers parallel to b results in the formation of a three-dimensional structure in which yttrium and sodium cations are incorporated for charge compensation. In more detail, four non-tetrahedral cation positions can be differentiated which are coordinated by 6 and 8 oxygen ligands. Refinements of the site occupancies did not reveal any indication for mixed Na-Y populations on these positions. Finally, several geometrical parameters of rings occurring in cyclo-trisilicate structures have been compiled and are discussed.     

Synthesis of chiral vicinal C2 symmetric and unsymmetric bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine by aminolysis of N-tosylaziridines

The ring opening of N-tosylaziridines with aliphatic amines can be efficiently catalyzed by lithium perchlorate to provide derivatives of the trans-1,2-diamine in high yields. The reaction was used in desymmetrization of several cyclic N-tosylaziridines using chiral amines. Using this strategy, an efficient synthesis of chiral vicinal C₂ symmetric bis(sulfonamide) and unsymmetrical bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine was developed.     

Stereoselective total synthesis of almorexant

A highly stereoselective synthesis of almorexant has been achieved using (R)-tert-butanesulfinamide as a chiral source. The chiral tetrahydroisoquinoline core was constructed through allylation of chiral N-sulfinyl imine followed by ring closure of the secondary amide with a tethered halide. The chiral α-phenyl amide was introduced by means of S_N2 substitution of (S)-methyl 2-phenyl-2-(tosyloxy)acetate with chiral tetrahydroisoquinoline.     

Facile Construction of the 7,8‐Olefin Linkage in Vitamin D3: A Practical Synthesis Benefiting the Vitamin D3 Analog Study

Abstract

A facile procedure for construction of the 7,8‐olefin linkage in vitamin D₃ is described. Treatment of a mixture of A‐ring phosphine oxide and CD‐ring ketone in THF with lithium hexamethyldisilazide (LHMDS) at ?20°C followed by gradual heating to 50°C gives the key intermediate of vitamin D₃ analogs in excellent yield. This simplified procedure makes possible small‐scale synthesis benefiting the vitamin D₃ analog study.     

B2O3/Al2O3 as an Efficient and Recyclable Catalyst for the Synthesis of β-Amino Alcohols under Solvent-Free Conditions

A convenient and efficient procedure for the solvent-free synthesis of β-amino alcohols has been achieved via B₂O₃/Al₂O₃-promoted highly regioselective ring opening of epoxides with aromatic amines in good to excellent yields at room temperature. Additionally, the catalyst can be recycled without affecting the catalytic property.     

Single crystal growth and structure of La4Cu3MoO12

We report the synthesis and structure determination of single crystals of La₄Cu₃MoO₁₂ grown from a CuO/KCl flux. This material, whose structure had previously been reported based solely on polycrystalline diffraction data, shows frustrated magnetic behavior and an anti-ferromagnetic ordering of spin-1/2 triangles at low temperatures. The structural and atomic parameters determined from the single crystal data are in very good agreement with those reported previously. However, HREM data showed evidence for disorder in the stacking of the Cu₃MoO₄ planes, and thus a twinned structural refinement in space group P2₁/m was replaced by an equivalent disordered structural model in space group Pm. This development of a synthetic route to single crystals of La₄Cu₃MoO₁₂ will allow a more detailed investigation of its complex electronic and magnetic properties.     

Thiolated Janus Silsesquioxane Tetrapod: New Precursors for Functional Materials

Herein, we report synthetic strategies for the development of a bifunctional Janus T₄ tetrapod (Janus ring), in which the orthogonal silsesquioxane and organic faces are independently functionalized. An all-cis T₄ tetrasilanolate was functionalized to introduce thiol moieties on the silsesquioxane face and naphthyl groups on the organic face to introduce luminescent and self-organization properties. The stepwise synthesis conditions required to prepare such perfectly defined oligomers via a suite of well-defined intermediates and to avoid polymerization or reactions over all eight positions of the tetrapod are explored via ²⁹Si, ¹³C and ¹H NMR, FTIR and TOF-ESI mass spectroscopy. To the best of our knowledge, this is one of the few reports of Janus T₄ tetrapods, with different functional groups located on both faces of the molecule, thus expanding the potential range of applications for these versatile precursors.     

Domino Aza-Michael-SNAr-Heteroaromatization Route to C5-Substituted 1-Alkyl-1H-Indole-3-Carboxylic Esters

A new synthesis of C5-substituted 1-alkyl-1H-indole-3-carboxylic esters is reported. A series of methyl 2-arylacrylate aza-Michael acceptors were prepared with aromatic substitution to activate them towards S_NAr reaction. Subsequent reaction with a series of primary amines generated the title compounds. Initially, the sequence was expected to produce indoline products, but oxidative heteroaromatization intervened to generate the indoles. The reaction proceeded under anhydrous conditions in DMF at 23–90 °C using equimolar quantities of the acrylate and the amine with 2 equiv. of K₂CO₃ to give 61–92% of the indole products. The reaction involves an aza-Michael addition, followed by S_NAr ring closure and heteroaromatization. Since the reactions were run under nitrogen, the final oxidation to the indole likely results from reaction with dissolved oxygen in the DMF. Substrates incorporating a 2-arylacrylonitrile proved too reactive to prepare using our protocol. The synthesis of the reaction substrates, their relative reactivities, and mechanistic details of the conversion are discussed.     

Boron trifluoride etherate-assisted ring opening of ethylene oxide by a chiral organolithium: enantioselective synthesis of (R)-N-Boc-2-(2-hydroxyethyl)pyrrolidine

A practical synthesis of (R)-N-Boc-2-(2-hydroxyethyl)pyrrolidine in high enantiomeric purity is described. The synthesis involves BF₃·Et₂O-assisted ring opening of ethylene oxide by a homochiral carbanion (R)-3, which is derived from sparteine-mediated asymmetric deprotonative lithiation of 1-Boc-pyrrolidine.     

Direct syntheses of Lan+1NinO3n+1 phases (n=1, 2, 3 and ∞) from nanosized co-crystallites

A new direct route for the “bottom up” syntheses of phases in the La_n+1Ni_nO_3n+1 series (n=1, 2, 3 and ∞) has been achieved via single-step heat treatments of nanosized co-crystallized precursors. The co-crystallized precursors were prepared using a continuous hydrothermal flow synthesis system that uses a superheated water flow at ca. 400 °C and 24.1 MPa to produce nanoparticulate slurries. Overall, a significant reduction in time and number of steps for the syntheses of La₃Ni₂O₇ and La₄Ni₃O₁₀ was achieved compared with more conventional synthesis methods, which typically require multiple homogenization and reheating steps over several days.     

Regioselective Ring Opening of Styrene Oxide Catalyzed by MoO2(acac)2

The ring-opening reaction of styrene oxide with various nitrogen, oxygen, and carbon nucleophiles catalyzed by MoO₂(acac)₂ was described. The corresponding ring-opening compounds with nearly 100% regioselectivities were obtained under mild conditions in moderate to good yields. MoO₂(acac)₂ is a highly efficient catalyst for the ring opening of styrene oxide. The reaction serves as a simple and efficient method for the synthesis of 1,2-bifunctional compounds.     

An innovative synthesis of dibenzofurans through a carbanion-induced ring transformation reaction

An innovative route for the synthesis of substituted dibenzofurans has been delineated through a ring transformation reaction of suitably functionalized 2H-pyran-2-ones by reaction with 7-methoxybenzofuran-3-one, in high yield. The novelty of the procedure lies in the creation of an aromatic ring from a 2H-pyran-2-one involving the -COCH₂-moiety of the substrate.     

Mild and practical stereoselective synthesis of (Z)- and (E)-allyl bromides from Baylis-Hillman adducts using Appel agents (PPh3/CBr4): a facile synthesis of semiplenamides C and E

Appel agents (PPh₃/CBr₄) have been utilized for high-yielding stereoselective synthesis of (Z)- and (E)-allyl bromides from Baylis-Hillman adducts at room temperature. The method has been applied for the synthesis of naturally occurring bioactive fatty acid amides, semiplenamides C and E.     

A new one-pot synthesis of Gb3 and isoGb3 trisaccharide analogues

Gb₃ and isoGb₃ are both biologically important oligosaccharides. A new efficient synthesis of Gb₃ and isoGb₃ trisaccharide analogues has been achieved by one-pot sequential glycosylation strategy starting from simple monosaccharide building blocks promoted by N-(phenylthio)-?-caprolactam at room temperature.