Molecular structure and conformational stability of allylisocyanate—post-Hartree–Fock and density functional theory studies

The molecular structure and conformational stability of allylisocyanate (CH₂CHCH₂NCO) molecule was studied using the ab initio and DFT methods. The geometries of possible conformers, C-gauche (δ=120°, θ=0°) (δ=C=C–C–N and θ=C–C–N=C) and C-cis N-trans (δ=0° and θ=180°) were optimized employing HF/6-31G^*, MP2/6-31G^* levels of theory of ab initio and BLYP, B3LYP, BPW91 and B3PW91 methods of DFT implementing the atomic basis set 6-311+G(d,p). The structural and physical parameters of the above conformers were discussed with the experimental and theoretical values of the related molecules, methylisocyanate and 3-fluoropropene. It has been found that the N=C=O bond angle is not linear as the experimental result for both the conformers and the theoretical bond angle is 173°. The rotational potential energy surfaces have been performed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The Fourier decomposition potentials were analysed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The HF/6-31G^* level of theory predicted that the C-gauche conformer is more stable than the C-cis N-trans conformer by 0.41 kJ/mol, but the MP2 and DFT methods predicted the C-cis N-trans conformer is found to be more stable than the C-gauche conformer. The calculated chemical hardness value at the HF/6-31G^* level of theory predicted the C-cis N-trans form is more stable than C-gauche form, whereas the chemical hardness value at the MP2/6-31G^* level of theory favours the slight preference towards the C-gauge conformer.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of 1-bromo 4-fluoronaphthalene

The FTIR and FT-Raman spectra of 1-bromo 4-fluoronaphthalene have been recorded in the regions 4000-100cm(-1) and 3500-100cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis based on DFT (density functional theory) using standard B3LYP/6-311+G** basis set combination for the most optimized geometry. Normal coordinate calculations performed with the DFT force field and subsequently corrected by a recommended set of scale factors, yielded fairly good agreement between observed and calculated frequencies. On the basis of the comparison between calculated and experimental results, assignments of fundamental modes were examined.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Density functional theory study of vibrational spectra. 8. Assignment of fundamental vibrational modes of 9,10-anthraquinone and 9,10-anthraquinone-d8

Density functional theory (using Becke's exchange and Lee-Yang-Parr's correlation functionals (BLYP)) and ab initio Hartree-Fock calculations were carried out in order to investigate the molecular structure and vibrational spectra of 9,10-anthraquinone and its perdeuterated analog. The calculated structural and spectral features are in good agreement with the available experimental results. Most of the BLYP/6-31G* non-CH(D) stretching frequencies are slightly lower than reliable experimental assignments; the mean absolute deviation is about 14 cm⁻¹. On the basis of agreement between calculated and experimental results, assignments of the fundamental vibrational modes were examined and some reassignments were proposed. The calculated results can serve as a guide for a future experimental search for the missing fundamentals of the target molecules.     

Density functional theory and post-Hartree-Fock studies on molecular structure and harmonic vibrational spectrum of formaldehyde

Density functional theory (DFT) with the Becke's three-parameter exchange correlation functional and the functional of Lee, Yang and Parr, gradient-corrected functionals of Perdew, and Perdew and Wang [the DFT(B3LYP), DFT(B3P86) and DFT(B3PW91) methods, respectively], and several levels of conventional ab initio post-Hartree-Fock theory (second- and fourth-order perturbation theory M?ller-Plesset MP2 and MP4(SDTQ), coupled cluster with the single and double excitations (CCSD), and CCSD with perturbative triple excitation [CCSD(T)], configuration interaction with the single and double excitations [CISD], and quadratic configuration interaction method [QCISD(T)], using several basis sets [ranging from a simple 6-31G(d,p) basis set to a 6-311+ +G(3df, 2pd) one], were applied to study of the molecular structure (geometrical parameters, rotational constants, dipole moment) and harmonized infrared (IR) spectrum of formaldehyde (CH₂O). High-level ab initio methods CCSD(T) and QCISD(T) with the 6-311+ +G(3df, 2pd) predict correctly molecular parameters, vibrational harmonic wavenumbers and the shifts of the harmonic IR spectrum of ¹²CH₂ ¹⁶O upon isotopic substitution. Received: 30 January 1997 / Accepted: 7 May 1997     

2,6-二巯基嘌呤互变异构体热力学稳定性的密度泛函理论研究

利用密度泛函(DFT)B3LYP/6-311G(d,p)方法,水相计算采用自洽反应场(SCRF)中的Onsager模型,对气相和水相中可能存在的13种2,6-二巯基嘌呤互变异构体进行了全优化,并计算了各异构体的热力学参数、偶极矩及原子净电荷。计算结果表明,不论是气相还是水相,二硫酮DTP(1,3,7)是最稳定的异构体。溶剂化效应使各异构体的稳定性均增强,偶极矩大者其稳定性显著增大。溶剂化吉布斯自由能与异构体在两相中偶极矩之差存在相关性。二硫酮DTP(1,3,7)在水相中与致癌物BPDE进行亲核取代反应时,二硫酮DTP(1,3,7)中的S10原子优先进攻亲电试剂BPDE.     

Density functional calculations of the pseudorotational flexibility of tetrahydrofuran

The flexibility of the five-membered ring in tetrahydrofuran was investigated using quantum mechanical methods involving density functional, Hartree-Fock, and many-body perturbation theory (MP2, MP4) calculations. We found that motion along the pseudorotational path of tetrahydrofuran is nearly free. The 0.1 kcal/mol energy barrier for pseudorotation, calculated at the highest MP4(SDQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) level of theory, agrees well with the experimental value of 0.16±0.03 kcal/mol. Similar results were obtained with the S-VWN, B3-LYP and B-LYP density functional calculations using the 6-31G(d) set of atomic orbitals. Also the density functional dipole moments and geometries were in good agreement with both the MP2 and experimental benchmarks. However, all density functional methods that utilized the default integration grid in the Gaussian 94 program were found to provide false stationary points of the C ₁ symmetry near the pseudorotational angle of 100°. These stationary points disappeared when a denser spherical-product grid was used. Overall, the hybrid B3-LYP functional was found to be the most promising quantum mechanical method for the modeling of biomolecules containing the furanose ring. Received: 17 June 1997 / Accepted: 20 November 1997     

Analysis of vibrational spectra of 2 and 3-methylpiperidine based on density functional theory calculations

The experimental and theoretical vibrational spectra of 2 and 3-methylpiperidine (abbreviated as 2-MP and 3-MP) were studied. The FT-Infrared spectra of 2-MP and 3-MP molecules were recorded in the liquid phase. The structural and spectroscopic analysis of the title molecules were made by using density functional harmonic calculations. For the title molecules, only one form was found most stable structure by using B3LYP level with the 6-311G (d,p) basis set. Selected experimental bands were assigned and characterized based on the scaled theoretical wave numbers by their total energy distribution (TED).     

A DFT analysis of the vibrational spectra of nitrobenzene

Raman and FTIR, spectra of nitrobenzene, nb, and its isotopomers, nb-¹⁵N, nb-¹³C₆ and nb-d₅, were obtained and the fundamental vibrational modes assigned with the aid of a B3LYP/6-311+G** calculation, without the need for scaling of the force constants. The changes in vibrational coupling between the nitro and benzene groups upon certain isotopic substitutions are well modelled by the calculation, which is able to reproduce the isotopic shifts in frequencies for the nitro vibrations, as well as changes in IR intensities.     

Structure and conformational stability of CH2CHCH2X (X=F, Cl and Br) molecules—post Hartree–Fock and density functional theory methods

The molecular structure and conformational stability of CH₂CHCH₂X (X=F, Cl and Br) molecules were studied using ab initio and density functional theory (DFT) methods. The molecular geometries of 3-fluoropropene were optimized employing BLYP and B3LYP levels of theory of DFT method implementing 6-311+G(d,p) basis set. The MP2/6-31G^*, BLYP and B3LYP levels of theory of ab initio and DFT methods were used to optimize the 3-chloropropene and 3-bromopropene molecules. The structural and physical parameters of the molecules are discussed with the available experimental values. The rotational potential energy surface of the above molecules were obtained at MP2/6-31G^* and B3LYP/6-311+G(d,p) levels of theory. The Fourier decomposition of the rotational potentials were analyzed. The HF/6-31G^* and MP2/6-31G^* levels of theory have predicted the cis conformer as the minimum energy structure for 3-fluoropropene, which is in agreement with the experimental values, whereas the BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory reverses the order of conformation. The ΔE values calculated for 3-chloropropene at MP2/6-31G^*, BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory show that the gauche form is more stable than the cis form, which is in agreement with the experimental value. The same levels of theory have also predicted that the gauche form is stable than cis for 3-bromopropene molecule. The maximum hardness principle has been able to predict the stable conformer of 3-fluoropropene at HF/6-31G^* level of theory, but the same level of theory reverses the conformational stability of 3-chloropropene and 3-bromopropene molecules and MP2/6-31G^* level of theory predicted the stable conformer correctly.     

Density functional theory study of the FT-IR spectra of phthalimide and N-bromophthalimide

Fourier transform infrared (FT-IR) spectra of phthalimide and N-bromophthalimide have been recorded in the range of 4000-400 cm-1. With the hope of providing more and effective information on the fundamental vibrations, a normal coordinate analysis has been performed on phthalimide and N-bromophthalimide, by assuming C2v symmetry. Density functional theory (DFT)-Beck3-Lee-Yang-Parr (B3LYP) levels with 6-31G* and 6-311+G** basis sets have been employed in quantum chemical analysis. The computational frequencies are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra.     

Analysis of vibrational spectra of L-alanylglycine based on density functional theory calculations

FT Raman and IR spectra of the crystallized biologically active molecule, L-alanylglycine (L-Ala-Gly) have been recorded and analyzed. The equilibrium geometry, bonding features and harmonic vibrational frequencies of L-Ala-Gly have been investigated with the help of B3LYP density functional theory (DFT) method. The calculated molecular geometry has been compared with the experimental data. The assignments of the vibrational spectra have been carried out with the help of normal coordinate analysis (NCA) following the scaled quantum mechanical force field methodology (SQMFF). The optimized geometry shows the non-planarity of the peptide group of the molecule. Potential energy surface (PES) scan studies has also been carried out by ab initio calculations with B3LYP/6-311+G** basis set. The red shifting of NH3+ stretching wavenumber indicates the formation of N-H...O hydrogen bonding. The change in electron density (ED) in the sigma* antibonding orbitals and E2 energies have been calculated by natural bond orbital analysis (NBO) using DFT method. The NBO analysis confirms the occurrence of strong intermolecular hydrogen bonding in the molecule.     

儿茶素结构和振动光谱的密度泛函理论研究

本文利用密度泛函理论方法B3LYP在6-311 G(d,p)水平上研究了儿茶素及其异构体表儿茶素分子的几何构型,计算结果与实验所得结构参数一致.计算了儿茶素分子平衡构型下的力常数,使用Wilson的GF矩阵方法计算了振动基频以及相应的势能分布,据此结合理论计算的光谱强度,对儿茶素分子的振动基频进行了完善合理的理论归属.     

On the vibrational spectra and conformational stability of 1,1-dimethylhydrazine from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

Variable temperature (−105 to −150 °C) studies of the infrared spectra (3500–400 cm⁻¹) of 1,1-dimethylhydrazine, (CH₃)₂NNH₂, in liquid krypton have been carried out. No convincing spectral evidence could be found for the trans conformer which is expected to be at least 600 cm⁻¹ less stable than the gauche form. The structural parameters, dipole moments, conformational stability, vibrational frequencies, and infrared and Raman intensities have been predicted from MP2/6-31G(d) ab initio calculations. The predicted infrared and Raman spectra are compared to the experimental ones. The adjusted r₀ parameters from MP2/6-311+G(d,p) calculations are compared to those reported from an electron diffraction study. The energy differences between the gauche and trans conformers have been obtained from MP2 ab initio calculations as well as from density functional theory by the B3LYP method calculations from a variety of basis sets. All of these calculations indicate an energy difference of 650–900 cm⁻¹ with the B3LYP calculations predicted the larger values. The potential function governing the conformational interchange has been predicting from both types of calculations and comparisons have been made. The barrier to internal rotation by the independent rotor model of the inner methyl group is predicted to have a value of 1812 cm⁻¹ and that of the outer one of 1662 cm⁻¹ from ab initio MP2/6-31G(d) calculations. These values agree well with the experimentally determined values of 1852±16 and 1558±12 cm⁻¹, respectively, from a fit of the torsional transitions with the coupled rotor model. For the coupled rotor model the predicted V′₃₃ (sin 3τ₀ sin 3τ₁ term) value which ranged from 190 to 232 cm⁻¹ is in reasonable agreement with the experimental value of 268±3 cm⁻¹ but the predicted V₃₃ (cos 3τ₀ cos 3τ₁ term) value of −73 to −139 cm⁻¹ is 25% smaller and of the opposite sign of the experimental value of 333±22 cm⁻¹. These theoretical and spectroscopy results are compared to similar quantities of some corresponding molecules.     

Vibrational spectra and density functional study of propylgermane

Raman and infrared spectra of propylgermane, CH₃CH₂CH₂GeH₃, and its Ge-deuterated analog, CH₃CH₂CH₂GeD₃, were investigated in their gaseous, liquid and solid states. The normal coordinate treatment was carried out by density functional theory (DFT) calculation, using B3LYP/6-31G^* and 6-311++G^** basis sets, and the corresponding fundamental vibrations were assigned. The trans (T) and gauche (G) forms around the central C–C bond coexisted in the gaseous and liquid states and only the T form existed in the solid state. From the temperature dependent measurements of the Raman spectra in the liquid state, the enthalpy difference was found to be ΔH(T−G)=−0.36±0.02 kcalmol⁻¹ with the T form being more stable. The energy differences between the isomers obtained by DFT calculations were ΔE(T−G)=−0.46 kcalmol⁻¹ and ΔE(T−G)=−0.87 kcalmol⁻¹ by the 6-31G^* basis set and 6-311++G^** basis set, respectively.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Ab initio and density functional theory calculations of molecular structure and vibrational spectrum of ethyl azidoacetate

Here we report ab initio and density functional results for molecular properties of ethyl azidoacetate (N₃CH₂COOC₂H₅) and for the corresponding singly ionized structure (N₃CH₂COOC₂H₅⁺). Ab initio ionization energies based on Koopmans’ theorem are in excellent agreement with the experimental data from ultraviolet photoelectron spectroscopy. DFT adiabatic energy differences between neutral and ionized structures are very sensitive to electronic correlation effects and are not in very good agreement with experiment. The results for the structure and vibrational frequencies are compared with the experimental data of related molecular structures.     

Density functional theory study of the photosensitization mechanisms of indigo

The triplet excited state properties and photosensitization mechanisms of indigo were investigated based on density functional theory calculations. The solvent effects on the photosensitization mechanisms of indigo have also been considered. The thermodynamic feasibility of the possible ¹O₂ and O₂·⁻-photogeneration pathways by triplet excited state indigo in different solvents was explored, in order to gain some deeper insights into the photosensitization characters of the dye.      

Vibrational spectra of mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes: Density functional theory calculations

The vibrational (IR and Raman) spectra of neutral and reduced mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes Y(Pc)(Por) and [Y(Pc)(Por)]⁻ [the simplified models of mixed (phthalocyaninato)(porphyrinato) rare earth(III) complexes] are studied using density functional theory (DFT) calculations. The simulated IR and Raman spectra of Y(Pc)(Por) are compared with the experimental IR spectrum of Tb(Pc)(TClPP) and Raman spectrum of Y(Pc)(TClPP), respectively, and many bands can acceptably fit in spite of the different species. On the basis of comparison with the simulated spectra of PbPc and PbPor together with the assistance of normal coordinate analysis, the calculated frequencies in their IR and Raman spectra are identified in terms of the vibrational mode of different ligand for the first time. The calculated frequency at 1048 cm⁻¹ in the IR spectrum of [Y(Pc)(Por)]⁻ with contribution from both Pc and Por vibrational modes is the characteristic IR vibrational mode of the reduced double-decker, while the characteristic IR vibrational mode of Y(Pc)(Por) attributed from the vibration of phthalocyanine monoanion radical Pc⁻ appears at 1257 cm⁻¹. In line with our previous experimental findings that the Raman spectra of M(Pc)(TPP) and M(Pc)(TClPP) are dominated by the Pc vibrational modes, theoretical calculations indicate that most of the Raman vibrational modes contributed from Por ring are covered up by those of Pc ring and thus are hard to be recognized in the Raman spectra of [Y(Pc)(Por)]⁻ and Y(Pc)(Por) due to their much weaker intensity in comparison with that of Pc ligand. Comparison in the IR and Raman spectra between [Y(Pc)(Por)]⁻ and Y(Pc)(Por) also suggests the localization of hole on the Pc ring in the neutral double-decker Y(Pc)(Por). The present work, representing the first detailed DFT study on the vibrational spectra of mixed (phthalocyaninato)(porphyrinato) rare earth(III) double-decker complexes, is useful in helping to understand the vibrational spectroscopic properties of this series of mixed tetrapyrrole ring complexes.     

Molecular structure and vibrational spectra of indole and 5-aminoindole by density functional theory and ab initio Hartree–Fock calculations

The molecular geometry and vibrational frequencies of indole and 5-aminoindole in the ground state have been calculated by using the Hartree–Fock and density functional method with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with the experimental values. Comparison of the observed fundamental vibrational frequencies of indole and 5-aminoindole with the calculated results by density functional and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock approach for molecular vibrational problems. The theoretical spectrograms for FT-IR spectrum of 5-aminoindole have been constructed.