Synthese und Kristallstrukturen der mehrkernigen Rhenium–Nitrido‐Komplexe [Re2N2Cl4(PMe2Ph)4(MeCN)] und [Re4N3Cl9(PMe2Ph)6]

Synthesis and Structures of the Multinuclear Rhenium Nitrido Complexes [Re₂N₂Cl₄(PMe₂Ph)₄(MeCN)] and [Re₄N₃Cl₉(PMe₂Ph)₆] The binuclear rhenium complex [Re₂N₂Cl₄(PMe₂Ph)₄(MeCN)] ( 1 ) is obtained as a byproduct of the synthesis of [(Me₂PhP)₃(MeCN)ClReNZrCl₅] from [ReNCl₂(PMe₂Ph)₃] and [ZrCl₄(MeCN)₂] in toluene. It crystallizes as 1 · 2 toluene in the monoclinic space group P2₁/n with a = 1517.0(3); b = 1847.7(2); c = 1952.4(6) pm; β = 106.44(1)° and Z = 4. The two Re atoms are connected by an asymmetric nitrido bridge Re≡N–Re with distances Re–N of 169.9(5) and 208.7(5) pm. In course of the reaction of [ReNCl₂(PMe₂Ph)₃] with [ZrCl₄(THF)₂] in CH₂Cl₂ hydrochloric acid is formed by acting of the Lewis acid on the solvent. HCl protonates and eliminates phosphine ligands of the educt [ReNCl₂(PMe₂Ph)₃] to form the phosphonium salt [PMe₂PhH]₂[ZrCl₆] ( 2 ). It crystallizes in the monoclinic space group C2/c with a = 1536.9(3); b = 1148.8(1); c = 1402.2(3) pm, β = 100.70(2)° and Z = 4. The remaining fragments of the rhenium complex combine to yield the tetranuclear mixed valent complex [Re₄N₃Cl₉(PMe₂Ph)₆] ( 3 ), crystallizing as 3 · CH₂Cl₂ in the triclinic space group P 1 with a = 1312.9(19); b = 1661.4(2); 1897.1(2) pm; α = 78.62(1)°; β = 86.77(1)°; γ = 68.28(1)° and Z = 2. The four Re atoms occupy the corners of a tetrahedron. Its edges are formed by three nitrido and three chloro bridges. The asymmetric nitrido bridges Re≡N–Re are characterized by short distances in the range of 172(2) to 176(3) pm and long distances of 194(3) to 204(2) pm. The angles Re–N–Re are between 154(1) and 160(1)°.     

(PPh4)2[OsCl3(NO)(SnCl3)2] Synthese,IR-Spektrum und Kristallstruktur

(PPh₄)₂[OsCl₃(NO) (SnCl₃)₂]; Preparation, I.R. Spectrum, and Crystal Structure (P(C₆H₅)₄)₂[OsCl₃(NO)(SnCl₃)₂] yields from the reaction of OsCl₃(NO) with PPh₄-[SnCl₃] in dichloro methane forming red crystals. The complex crystallizes monoclinic in the space group C2/c with four formula units per unit cell. The crystal structure was determined by aid of X-ray diffraction data (2261 independent, observed reflexions, R = 4.9%). The cell parameters are a = 1369, b = 1989, c = 2088 pm, β = 99.54°. The structure consists of tetraphenyl phosphonium cations and [OsCl₃(NO)(SnCl₃)₂]^2?-anions. In the anion the osmium is coordinated octahedrally by three chlorine atoms (mean bond length r Os? Cl 238 pm), two SnCl₃ groups in transposition to each other (r Os? Sn 265 pm) and the N-atom of the covalently bonded nitrosyl ligand (r Os? N 173 pm). The i.r. spectrum of the anion is reported and assigned.     

Preparation and properties of dinitrogen complexes of molybdenum and tungsten with trimethylphosphine as coligand : III. Synthesis and properties of cis-[W(N2)2(PMe3)4], trans-[W(C2H4)2(PMe3)4] and [M(N2)(PMe3)5] (M = Mo,W). The crystal and molecular structure of [Mo(N2)(PMe3)5]

The reduction of [WCl₄(PMe₃)₃] with dispersed sodium, under dinitrogen, gives cis-[W(N₂)₂(PMe₃)₄], while under ethylene trans-[W(C₂H₄)₂(PMe₃)₄] is obtained. The ethylene complex can also be prepared by displacement of the dinitrogen molecules in cis-[W(N₂)₂(PMe₃)₄] by ethylene at room temperature and pressure. Interaction of cis-[M(N₂)₂(PMe₃)₄] complexes (M = Mo, W), with PMe₃, under helium or argon, yields [M(N₂)(PMe₃)₅]. The molybdenum complex crystallizes in the orthorhombic space group Pnma, with a 22.063(6), b 12.106(4), c 9.745(4) Å. The Mo—P distance trans to the dinitrogen ligand (2.483(7) Å) is slightly longer than the average of the other four Mo—P bonds (2.460(5) Å).     

Reactions oftrans-[Mo(CNMe)2(PMe2Ph)4] andmer-[W(CNMe)3(PMe2Ph)3] complexes with methanol and with mineral acids to give amines,ammonia and hydrocarbons

Summary Treatment oftrans-[Mo(CNMe)₂(PMe₂Ph)₄] andme-[W(CNMe)₃(PMe₂Ph)₃] with sulphuric or hydrochloric acids in methanol or ethanol, or in methanol alone, under irradiation, gives methylamine, ammonia and hydrocarbons (mainly methane). The complex [W₂(CNMe)₄(-CNHMe)₂(PMe₂Ph)₄]²⁺ cation has been obtained by the treatment ofmer-[W(CNMe)₃(PMe₂Ph₃] with H₂SO₄ or [Et₂OH][BF₄] and gives methylamine, ammonia and methane on further acid treatment.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.     

Oxygen atom transfer reactions from dioxygen to phosphines via a bridging sulfur dioxide in a trinuclear cluster complex of rhenium, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)

A trinuclear rhenium sulfide cluster complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(3)Cl(6)(PMe(2)Ph)(3)], synthesized from Re(3)S(7)Cl(7), dimethylphenylphosphine, and [(Ph(3)P)(2)N]Cl is readily converted to a bridging SO(2) complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)], by reaction with O(2). The oxygen atoms on the SO(2) ligand react with phosphines or phosphites to form phosphine oxides or phosphates, and the original cluster complex is recovered. The reaction course has been monitored by (31)P NMR as well as by UV-vis spectroscopy. The catalytic oxygenation of PMePh(2) in the presence of the SO(2) complex shows that turnovers are 8 per hour at 23 degrees C in CDCl(3). The X-ray structures of the cluster complexes are described.     

The preparation and molecular structure oftrans-[MoCl2(PMe2Ph)4]

Summary The compoundtrans-[MoCl₂(PMe₂Ph)₄] has been prepared by the reduction of MoCl₅ (by Mg) or of [MoCl₃(PMe₂Ph)₃] (by LiBuⁿ) in the presence of PMe₂Ph in tetrahydrofuran (THF). It has _eff=2.84 B.M. and crystallises in space group P1 witha=11.591(3),b=12.931(3),c=12.703(3) Å, = 95.28(2), =105.97(2), =103.54(2)°. Refinement of the structure gave R=0.036. The Mo-Cl and Mo-P distances average 2.443(6) and 2.534(8) Å, respectively.Low-valent phosphine complexes of the Group VI metals continue to attract much attention because of their involvement in studies of the catalytic activation of dinitrogen⁽¹⁾, dihydrogen(^{2, 3}), alkenes and alkynes(⁴). As a by-product during our studies of dinitrogen(¹) and hydride(²) complexes of molybdenum and tungsten, we obtainedtrans-[MoCl_2- (PMe₂Ph)₄] as yellow, paramagnetic crystals (_eff= 2.84 B.M.). We first obtained the compound during the attempted synthesis ofcis-[Mo(N₂)₂(PMe₂Ph)₄] by reduction of MoCl₅ with Mg in the presence of PMe₂Ph (see Experimental). Upon identification of the compound we found that it could be readily synthesised by treatment of [MoCl₃(PMe₂Ph)₃]⁽⁵⁾ with LiBuⁿ in THF in the presence of PMe₂Ph (experimental).The complex was shown to have thetrans structure by x-ray analysis (Figure). Analogues oftrans-[MoCl₂(PMe₂Ph)₄] have been prepared, namely [CrCl₂(Me₂PCH₂CH₂PMe₂)₂]⁽⁶⁾,trans- [MoCl₂(PMe₃)₄]⁽⁷⁾, [WCl₂(PMe₂Ph)₄]⁽⁸⁾ and [WCl₂(PMe₃)₄]⁽⁴⁾, of which onlytrans-[MoCl₂(PMe₃)₄] has been examined by X-rays⁽⁷⁾. Its principal structural parametersi.e. d(Mo-Cl)= 2.420(6), d(Mo-P)_av=2.496(3) Å⁽⁶⁾ are close to those found here fortrans-[MoCl₂(PMe₂Ph)₄].     

Darstellung und Kristallstruktur von trans-(Ph4As)2[OsCl2(NCS)(SCN)], Schwingungsspektren und Normalkoordinatenanalyse

Preparation and Crystal Structure of trans-(Ph₄As)₂[OsCl₂(NCS) (SCN) ], Vibrational Spectra and Normal Coordinate Analysis By treatment of trans-[OsCl₂I₄]^2? with (SCN)₂ in dichloromethane a mixture of different linkage isomers is formed, from which trans-[OsCl₂(NCS)(SCN)]^2? has been isolated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determination on a single crystal of trans-(Ph₄As)₂[OsCl₂(NCS)(SCN)] (triclinic, space group P 1 , a = 12.505(5), b = 12.056(5), c = 19.833(5) Å, α = 108.047(5)°, β = 91.964(5)°, γ = 117.048(5)°, Z = 2) reveals that two cis-positioned Thiocyanate(N) groups are coordinated with Os? N? C angles of 172.1° and 173.0° and two cis-positioned Thiocyanate(S) groups are coordinated with Os? S? C angles of 106.9° and 108.7°. Using the molecular parameters of the X-Ray determination the low temperature (10 K) IR and Raman spectra of the (n-Bu₄N) salt of the linkage isomer are assigned by a normal coordinate analysis based on a modified valence force field. The valence force constants are f_d(OsN) = 1.63 and f_d(OsS) = 1.30 mdyn/Å. Taking into account the trans influence a good agreement between observed and calculated frequencies is achieved.     

Synthesis and structure of osmium complexes [Ph3PR]2[OsCl6]·4DMSO

Russian Journal of General Chemistry - Reaction of sodium hexachloroosmate(IV) dihydrate with (2-oxopropyl)- and (2-carboxyethyl)-triphenylphosphonium chlorides in dimethyl sulfoxide afforded...     

Azidokomplexe von Vanadium(IV) und Vanadium(V): (Ph4P)2[VOCl2(μ‐N3)]2 und (Ph4P)2[VOCl(μ‐N3)(N3)2]2

Azido Complexes of Vanadium(IV) and Vanadium(V): (Ph₄P)₂[VOCl₂(μ‐N₃)]₂ and (Ph₄P)₂[VOCl(μ‐N₃)(N₃)₂]₂ (Ph₄P)₂[VOCl₂(μ‐N₃)]₂ ( 1 ) was prepared by reaction of (Ph₄P)[VO₂Cl₂] with trimethylsilylazide in the molar ratio 1:2 in dichloromethane solution to give dark green, moisture sensitive, non‐explosive single crystals. The reaction is accompanied by the formation of the dark blue side‐product (Ph₄P)₂[VOCl(μ‐N₃)(N₃)₂]₂ ( 2a ), which can be obtained as the main product by application of a large excess of Me₃SiN₃. Dark blue needles of 2a crystallize spontaneously from the CH₂Cl₂ solution within one hour at 4 °C. After standing at 4 °C under its mother liquid within 24 hours a first‐order phase transition of 2a occurs forming dark blue prismatic single crystals of 2b . According to single crystal X‐ray structure determinations, 2a and 2b crystallize in the same type of space group , however, with different lattice dimensions. The vanadium(IV) complex 1 is characterized by X‐ray structure determination and by vibrational spectroscopy (IR, Raman) as well as by EPR spectroscopy, whereas 2b is characterized by IR spectroscopy. 1 : Space group P2₁/n, Z = 2, a = 1009.5(1), b = 1226.6(2), c = 1943.0(2) pm, β = 98.42(1)°, R₁ = 0.0672. The complex anion forms centrosymmetric units with V₂N₂‐four‐membered rings with a V···V distance of 335.6(1) pm and coordination number five on the vanadium(IV) atoms. 2a : Space group , Z = 1, a = 1089.0(2), b = 1097.1(2), c = 1310.1(2) pm, α = 92.99(1)°, β = 106.12(2)°, γ = 117.05(2)°, V = 1309.8(4) ų, d_calc. = 1.440 g·cm^?3, R₁ = 0.0384. The complex anion forms centrosymmetric units of symmetry C_i with V₂N₂ four‐membered rings and VN bond lengths of 200.4(3) and 234.4(2) pm, respectively. The non‐bonding V···V distance amounts to 356.2(1) pm. 2b : Space group , Z = 1, a = 1037.3(2), b = 1157.6(2), c = 1177.2(2) pm, α = 98.48(2)°, ° = 103.82(2)°, γ = 106.33(2)°, V = 1281.8(4) ų, d_calc. = 1.471 g·cm^?3, R₁ = 0.0724. The structure of the complex anion is similar to the anion of 2a with VN bond lengths of the four‐membered V₂N₂ ring of 203.3(4) and 235.2(4) pm, respectively, and a non‐bonding V···V distance of 357.5(1) pm.     

Macropolyhedral boron-containing cluster chemistry. Synchrotron X-ray structural analysis of [(PMe2Ph)2Pd2B16H20(PMe2Ph)2] and [(PMe2Ph)3Pt2B16H18(PMe2Ph)]: models of intermediates to more condensed metallaboranes from the [(PMe2Ph)2PtB8H12] thermolysis system

Thermolyses of [(PMe2Ph)2PdB8H12] and [(PMe2Ph)2PtB8H12] respectively yield eighteen-vertex [(PMe2Ph)2Pd2B16H20(PMe2Ph)2] and [(PMe2Ph)3Pt2B16H18(PMe2Ph)], which exhibit structure models for probable successive precursive intermediates for the more condensed macropolyhedral metallaboranes [(PMe2Ph)4Pt3B14H16], [(PMe2Ph)2Pt2B12H16] and [(PMe2Ph)2Pt2B16H15(C6H4Me)(PMe2Ph)] that have previously been reported as products from [(PMe2Ph)2PdB8H12] thermolyses.     

[{ReN(PMe2Ph)3}{ReO3N}]2 – Structural Evidence for the Nitridotrioxorhenate(VII) Anion, [ReO3N]2−

Air‐stable, orange‐red single crystals of [{ReN(PMe₂Ph)₃}{ReO₃N}]₂ are formed when mer‐[ReNCl₂(PMe₂Ph)₃] reacts with strong bases in MeOH. The resulting centrosymmetric tetranuclear complex contains each two {ReN(PMe₂Ph)₃}²⁺ and {ReO₃N}^2? building blocks. They are connected by two oxygen and two nitrogen atoms giving an almost planar {Re₄O₂N₂} ring. The Re–N–Re bridges are only slightly bent (175.2(2)°), while the Re–O–Re angles are 160.9(1)°. The coordination environment of the rhenium atom in the nitridotrioxorhenate(VII) anion is a slightly distorted tetrahedron with O–Re–O and O–Re–N angles between 108.7(1)° and 111.3(1)°.