Effect of surface and internal waves on the hydrodynamic characteristics of a contour in the linear approximation

A method of solving the problem of the motion of an elliptic contour in a three-layer fluid is developed within the framework of the linear theory. The results of calculating the hydrodynamic contour loads and the shape of the interfaces are presented for the following problems: the motion of a contour beneath an interface between two media and in a two-layer fluid both beneath a rigid lid and a free surface. On the basis of the numerical experiment it is concluded that surface and internal waves have a significant effect on the hydrodynamic characteristics of the contour. Omsk. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 121–127, May–June, 1998. The work was carried out with financial support from the Russian Foundation for Basic Research (project No. 96-01-00093).     

Explicit Rate–Time Solutions for Modeling Matrix–Fracture Flow of Single Phase Gas in Dual-Porosity Media

One of the widely used methods for modeling matrix–fracture fluid exchange in naturally fractured reservoirs is dual porosity approach. In this type of modeling, matrix blocks are regarded as sources/sinks in the fracture network medium. The rate of fluid transfer from matrix blocks into fracture medium may be modeled using shape factor concept (Warren and Root, SPEJ 3:245–255, 1963); or the rate–time solution is directly derived for the specific matrix geometry (de Swaan, SPEJ 16:117–122, 1976). Numerous works have been conducted to study matrix–fracture fluid exchange for slightly compressible fluids (e.g. oil). However, little attention has been taken to systems containing gas (compressible fluid). The objective of this work is to develop explicit rate–time solutions for matrix–fracture fluid transfer in systems containing single phase gas. For this purpose, the governing equation describing flow of gas from matrix block into fracture system is linearized using pseudopressure and pseudotime functions. Then, the governing equation is solved under specific boundary conditions to obtain an implicit relation between rate and time. Since rate calculations using such an implicit relation need iterations, which may be computationally inconvenient, an explicit rate–time relation is developed with the aid of material balance equation and several specific assumptions. Also, expressions are derived for average pseudopressure in matrix block. Furthermore, simplified solutions (originated from the complex general solutions) are introduced applicable in infinite and finite acting flow periods in matrix. Based on the derived solutions, expressions are developed for shape factor. An important observation is that the shape factor for gas systems is the same as that of oil bearing matrix blocks. Subsequently, a multiplier is introduced which relates rate to matrix pressure instead of matrix pseudopressure. Finally, the introduced equations are verified using a numerical simulator.     

Separation impact of a circular disk floating on the surface of an ideal incompressible fluid of infinite depth

The three-dimensional mixed problem of the separation impact of a circular disk floating on the surface of an ideal incompressible unlimited fluid is considered. The position and shape of the contact area between the body and the fluid (and the separation zone) are not known and depend on the relation between the translational and angular velocities acquired by the disk upon impact. Because of this, the problem in question is nonlinear and belongs to the class of free-boundary problems. The problem is solved using the method of Hammerstein-type nonlinear boundary integral equations. This approach allows the fluid flow after impact and the unknown zone of separation of fluid particles to be determined simultaneously. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 4, pp. 76–86, July–August, 2009.     

One problem of the theory of dimensional electrochemical machining of metals

A method is proposed for determining the shape of the anode-article boundary for a given shape of the cathode-tool in plane problems of the theory of dimensional electrochemical machining of metals. Under the assumptions used, the boundary of the anode-article is divided into the working zone, where metal dissolution occurs, and an adjacent zone, where the treatment (dissolution) is terminated. The initial problem is reduced to a problem of a fictitious plane-parallel potential flow of an ideal fluid with a nonlinear condition on the free surface. The point of separation of the fictitious flow from the solid boundary corresponds to the point separating these two zones of the anode boundary. The Brillouin-Will condition of smooth separation is imposed at the separation point to construct a closed system of equations determining the problem solution. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 3, pp. 214–220, May–June, 2009.     

Generation of beams of three-dimensional periodic internal waves by sources of various types

The energy and force characteristics of periodic internal wave beams in a viscous exponentially stratified fluid are analyzed. The exact solutions of linearized problems of generation obtained by integral transformations describe not only three-dimensional internal waves but also the associated boundary layers of two types. The solutions not containing empirical parameters are brought to a form that allows a direct comparison with experimental data for generators of various types (friction, piston, and combined) of rectangular or elliptic shape. The stress tensor and force components acting on the generator are given in quadratures. In the limiting cases, the solutions are uniformly transformed to the corresponding expressions for the problems in a two-dimensional formulation. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 12–23, May–June, 2006     

Quasi-cylindrical figures of equilibrium of a rotating fluid

The problem of the equilibrium shape of a steady rotating rectilinear infinite cord of ideal self-gravitating homogeneous fluid is considered. The question whether, apart from the obvious solution, namely, an infinite circular cylinder, noncylindrical equilibrium figures can exist is investigated. A search is carried out among axisymmetric figures with periodic surface structure (“wavy” cylinders). The period of the wave structure and, in the first approximation, the shape of the surface are found as functions of the angular velocity of rotation. Sankt-Peterburg. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 22–30, May–June, 2000.     

Motion of a deformable droplet of magnetic fluid in a rotating magnetic field

The problem of the magnetic field-driven rotation of a magnetic fluid droplet in a viscous nonmagnetic fluid is solved analytically and experimentally. The shape of the droplet and the magnetic fields and velocities of both fluids are calculated in the weak-field approximation. The droplet is flattened for any relations between the parameters of the system. The instability of the axisymmetric shape of the droplet is established experimentally. A result of the instability is a sudden change in the droplet shape from a flattened ellipsoid of revolution to a triaxial ellipsoid elongated in the equatorial plane. The critical magnetic Bond number is determined. Perm’. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 22–30, January–February, 2000. The work was carried out with the support of the Russian Foundation for Basic Research (project No. 98-01-00182).     

The Acoustic Analogy and the Prediction of the Noise of Rotating Blades

The acoustic analogy was introduced into acoustics by Lighthill in 1952 to understand and predict the noise generated by the jet of an aircraft turbojet engine. The idea behind the acoustic analogy is simple but powerful. The entire noise generation process is mathematically reduced to the study of wave propagation in a quiescent medium with the effect of flow replaced by quadrupole sources. In jet noise theory, Lighthill was able to obtain significant and useful qualitative results from the acoustic analogy. The acoustic analogy has influenced the theoretical and experimental research on jet noise since the early 1950s. This paper, however, focuses on another area in which the acoustic analogy has had a significant impact, namely, the prediction of the noise of rotating machinery. The governing equation for this problem was derived by Ffowcs Williams and Hawkings in 1969. This equation is a wave equation for perturbation density with three source terms, which have become known as thickness, loading, and the quadrupole source terms, respectively. The Ffowcs Williams–Hawkings (FW–H) equation has been used for the successful prediction of the noise of helicopter rotors, propellers, and fans. Several reasons account for the success and popularity of the acoustic analogy. First, the problems of acoustics and aerodynamics are separated. Second, because the FW–H equation is linear, powerful analytical methods from linear operator theory can be used to obtain closed-form solutions. Third, advances in digital computers and computational fluid dynamics algorithms have resulted in high-resolution near-field aerodynamic calculations that are suitable for noise prediction. We present some of the mathematical results for noise prediction based on the FW–H equation, including examples for helicopter rotors. In particular, we discuss the prediction of blade-vortex interaction noise and high-speed impulsive noise of helicopter rotors. For high-speed propellers, we briefly discuss the derivation of a singularity-free solution of the FW–H equation for a supersonic panel on a blade. Received 24 January 1997 and accepted 30 May 1997     

On solving the problem of an ideal incompressible fluid flow around large-aspect-ratio axisymmetric bodies

Based on Babenko’s fundamental mathematical ideas, principally new (unsaturated) algorithms are developed for the numerical solution of problems of a potential axisymmetric ideal fluid flow around bodies of revolution, in particular, an ellipsoid of revolution with an aspect ratio equal to 1000. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 5, pp. 56–67, September–October, 2006.     

Nonstationary hydrodynamic characteristics of a double grid of profiles

The flow about a double grid of solid profiles of arbitrary shape which vibrate in a stream of an ideal incompressible fluid is considered. Behind the grid profiles, the nonstationary vortex traces simulated by the lines of contact velocity discontinuity are taken into account. The problem is reduced to the solution of a system of two integral equations relative to the fluid velocity on the initial profiles of the double grid under the assumption that the vibration amplitudes are small. Formulas for calculating the nonstationary forces and moments are derived. The dependences of these forces on the shape, mutual positions, and laws of vibration of the grid profiles are studied. Lavrent’ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 40, No. 4, pp. 150–155, July–August, 1999.     

Plane waves in a heavy two-layer liquid excited by a cylinder moving at an angle to the horizontal

A solution of an initial-boundary-value problem for a system of integrodifferential equations which describes the plane waves excited in an initially stationary heavy two-layer ideal fluid by a cylinder moving at an angle to the horizontal is investigated. The homogeneous fluid fractions of different densities are assumed to be separated by an evolving fluid interface (horizontal plane, if the liquid is at rest). An approximate solution of two problems for the waves excited by a cylinder moving with a constant acceleration and an oscillating cylinder is constructed analytically. Nizhnii Novgorod. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 137–152, July–August, 1998.     

Oscillating thermocapillary convection regimes driven by a point heat source

The stability of an axisymmetric thermocapillary flow driven by a point heat source located in the neighborhood of the free surface of a fluid filling a deep tank is investigated theoretically and experimentally. It is shown that for certain values of the depth and power of the heat source thermocapillary convection becomes unstable with respect to oscillating perturbations of the surface shape. Perm’, Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 92–103, March–April, 2000.     

Inertial motion of a body in an ideal fluid from the state at rest

The motion of a body in an ideal incompressible fluid flow without vortices in the absence of external forces is considered. It is demonstrated that the body can move inertially from the state at rest if its shape satisfies certain conditions. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 4, pp. 214–219, July–August, 2008.     

Emulsion flow through a porous medium with allowance for interphase mass transfer between the components

A new model of the flow of two miscible, mutually-insoluble fluids in a porous medium with the formation of an emulsion and adsorption of the fluid components on the skeleton is proposed. The model takes into account the effect of interphase mass transfer on the emulsion dynamics and the active porosity. A continuous general solution of the one-dimensional model and the problem of breakdown of a discontinuity is constructed. The flow regimes generated in displacement problems which depend on the shape of the adsorption isotherms and the densities of the fluid components are considered. The time dependence of the production rate is constructed for frontal displacement regimes and for displacement regimes with the formation of a zone of mixing (Riemann wave) of the initial reservoir and injected fluids. These functions coincide, at least qualitatively, with the experimental data [1] indicating an initial increase in production rate even against a background of falling reservoir pressure, transition through a maximum, and subsequent decline. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 77–88, January–February, 1997. The work was carried out with financial support from the Russian Foundation for Fundamental Research (project No. 96-01-00991).     

Oil low to a lateral well in the presence of bottom water

Exact solutions are obtained for a number of two-dimensional problems of steady-state fluid flow to a lateral hole in a reservoir with a quiescent bottom fluid of higher density or with a fluid of lower density at the reservoir top __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 5, pp. 114–126, September–October, 2008.     

Various methods of reconstruction of a cavity in an orthotropic layer

Direct and inverse problems of oscillations of an anisotropic layer with a cylindrical cavity of an arbitrary cross-sectional shape under the action of a load applied to the layer surface are considered. An asymptotic approach to solving these problems with cavities of small relative sizes is proposed. Numerical results of solving direct and inverse problems are presented. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 3, pp. 181–189, May–June, 2009.     

Analytical solutions of seepage theory problems. Inverse method, variational theorems, optimization and estimates (a review)

The results of analytical studies of the problems arising in connection with the prediction of ground water flow in civil engineering, hydrogeology and irrigation engineering are reviewed. Numerical techniques have become of ever greater significance in solving practical problems of seepage theory since the introduction of powerful computers in the sixties. However, even so analytical methods have proved to be necessary not only to develop and test the numerical algorithms but also to gain a deeper understanding of the underlying physics, as well as for the parametric analysis of complex flow patterns and the optimization and estimation of the properties of seepage fields, including in situations characterized by a high degree of uncertainty with respect to the porous medium parameters, the mechanisms of interaction between the fluid and the matrix, the boundary conditions and even the flow domain boundary itself. The review covers studies of ground water dynamics directly related to the problems of flow in domains with incompletely specified boundaries related to the authors interests. Mathematically, these problems reduce to boundary value problems for partial differential equations of elliptic type in domains with unknown boundaries found using specified boundary conditions. These are either deduced from the physical model of the process (the depression surface being an example) or determined by structural considerations (such as the underground shape of a dam or embankment). Kazan’. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 3–19, March–April, 1998.     

Motion of a cylinder below the free surface of a fluid at large froude numbers

A method of solving the problem of the motion of a cylinder of given shape below the free surface of an infinitely deep heavy fluid is perfected for large Froude numbers. The motion of a circular cylinder is investigated at small distances from the free surface. Solutions of the problem are given for cylinders with noncircular cross-sections. Kazan. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 34–45, July–August, 2000. The work was carried out with financial support from the Russian Foundation for Basic Research (projects Nos. 99-01-00169 and 99-01-00173).     

Fluid-structure interaction with an application to a body immersed and anchored in a fluid flow

In this paper, an implicit coupling algorithm for fluid–structure interaction problems with under-time steps for the solid is presented. Its implementation on two configurations is achieved by using the CASTEM finite-elements code. First, the free oscillations of a cylinder in an annular fluid domain where its movement is determined by the coupled fluid–solid action is considered in the case of viscous fluid. It should be noted that the implicit coupling algorithm gives the best prediction of the structure oscillations. The under-time steps for the solid are introduced in order to obtain better results. Then, an application whose final objective is to model a floating barrage is studied. The main goal of this application is to predict the displacements of a ring completely immersed and anchored by a cable to the lower boundary of the fluid domain. The finite-element discretization of the Navier–Stokes equations in the ALE formulation is used