Synthesis of Boltorn 1,2,3‐triazole dendrimers by click chemistry

Second‐, third‐, and fourth‐generation hyperbranched aliphatic polyols namely Boltorn® H20, Boltorn H30, and Boltorn H40 were endcapped with azido and activated acetylenic groups in good to excellent yields (75–95%) following an acid catalyzed procedure. The resultant terminally functionalized dendritic azido and acetylenic groups undergo 1,3‐dipolar cycloaddition using methyl (or ethyl) propiolate and benzyl azide, respectively, under catalytic or noncatalytic conditions below 40 °C to yield 1,2,3‐triazole dendrimeric polymers in 82–95% yield, under extremely mild conditions that could be applied for compounds sensitive to acid, base, or heat. The dendritic azido and activated acetylenic derivatives may act as novel scaffolds to tune the mechanical properties of different polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3748–3756, 2009     

Synthesis and characterization of star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties

Star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties were synthesized through the ring‐opening polymerization of 2,2‐dimethyltrimethylene carbonate (DTC) initiated by cholic acid with hydroxyl groups. Through the control of the feed ratio of the initiator cholic acid to the monomer DTC, a series of star oligomers/polymers with different molecular weights were obtained. The star oligomers/polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, combined size exclusion chromatography/multi‐angle laser light scattering analysis, wide‐angle X‐ray scattering, polarizing light microscopy, and differential scanning calorimetry. Compared with linear poly(2,2‐dimethyltrimethylene carbonate), these star oligo/poly(2,2‐dimethyltrimethylene carbonate)s had much faster hydrolytic degradation rates. With one of the star oligomers/polymers, a microsphere drug‐delivery system of a submicrometer size was fabricated with a very convenient ultrasonic dispersion method that did not involve toxic organic solvents. The in vitro drug release was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6688‐6696, 2006     

Self‐immolative dendrimers as novel drug delivery platforms

Self‐immolative dendrimers were recently developed and introduced as a potential platform for a single‐triggered multi‐prodrug. These unique structural dendrimers can release all of their tail units through domino‐like chain fragmentation, which is initiated by a single cleavage at the dendrimer core. The incorporation of drug molecules as the tail units and an enzyme substrate as the trigger generates a multi‐prodrug unit that is activated with a single enzymatic cleavage. We have demonstrated several examples of self‐immolative dendritic prodrug systems and have shown significant advantages with respect to the appropriate monomeric prodrug. We anticipate that single‐triggered, dendritic prodrugs will be exploited to further improve selective chemotherapeutic approaches in cancer therapy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1569–1578, 2006     

Immobilization of aminothiols on poly(oxyethylene H‐phosphonate)s and poly(oxyethylene phosphate)s—An approach to polymeric protective agents for radiotherapy of cancer

This study describes the synthesis and characterization of polymer complexes constructed from the radioprotective agent S‐2(3‐aminopropylamino) ethylphosphorothioic acid dihydrate (amifostine or WR‐2721), applied in the radiation cancer treatment, and biodegradable poly(oxyethylene H‐phosphonate), poly(hydroxyoxyethylene phosphate), or poly(methyloxyethylene phosphate). The immobilization of another radioprotector, used in cancer radiotherapy, 1‐(3‐aminopropyl)aminoethanethiol (WR‐1065) on the same polymers is also achieved through a covalent bond (Atherton‐Todd reaction coupling), ionic bond, and physical complexation, respectively. The structure of the complexes formed is elucidated by ¹H‐ ¹³C‐, ³¹P NMR and FTIR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1349–1363, 2007     

Amphiphilic comb-like polymers based on poly(oxyethylene)s as drug-delivery carriers

Comb-like polymers with biocompatible oxyethylene backbones and amphiphilic side groups were synthesized via polymer-analogous reactions. Using these polymers, indomethacin-loaded polymeric micelles were fabricated with various drug-to-polymer weight ratios using the oil-in-water emulsion technique. In addition, the size, size distribution, CMC, drug-loading content, and entrapment efficiency of the polymeric micelles were analyzed. The volume-weighted diameters of polymeric micelles ranged from 10 to 140 nm and were narrowly distributed for passive targeting drug delivery. The CMCs were lower (approximately 10(-8) M) than for conventional surfactants and block copolymers.     

Synthesis,complex formation,and dilute‐solution associative behavior of linear poly(methacrylic acid)‐graft‐poly(2‐ethyl‐2‐oxazoline)*

Poly(methacrylic acid) (PMA) and poly(2‐ethyl‐2‐oxazoline) (PEOZO) are a polyacid/polybase pair capable of forming reversible, pH‐responsive, hydrogen‐bonding complexes stabilized by hydrophobic effects in aqueous media. Linear PMA was modified with long‐chain (number‐average molecular weight: 10,000) PEOZO via statistical coupling reactions in organic media to prepare a series of PMA‐graft‐PEOZO copolymers. Potentiometric titrations revealed that the presence of tethered PEOZO markedly increases the pK_a values for PMA‐g‐PEOZO copolymers as compared with simple PMA/PEOZO mixtures at degrees of ionization, α, between 0.0 and 0.1. The dilute‐solution PMA–PEOZO intramolecular association has been probed by monitoring the PEOZO NMR spin–spin (T₂) relaxation as a function of pH. Covalently attached PEOZO side chains participate in complexation at higher values of α than untethered PEOZO. Surprisingly, most PEOZO side chains did not take part in hydrogen bonding at low α, and the highest level of PEOZO incorporation induced a decrease in the number of PMA/PEOZO hydrogen bonds. The polymer self‐diffusion as a function of α was measured with dynamic light scattering. At low pH, the copolymers had no charge and they were in a collapsed form. At high pH, the expected conformational expansion of the PMA units was enhanced at moderate levels of PEOZO incorporation. However, the highest PEOZO incorporation induced the onset of intramolecular associations between PEOZO units along the copolymer chains. Low shear rheometry and light scattering measurements were used in conjunction with the T₂ NMR measurements to propose a model consistent with the aforementioned behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2520–2533, 2004     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Synthesis and aggregation of poly(valine)‐poly (ethylene glycol) block copolymers

The solubility nature of many medicines presents a challenge for successful delivery of these drugs to the body. Polymeric carriers are potentially viable as vessels for both the protection and transport of these medicinal substances. In an effort to generate polymeric materials for this desired application, A‐B‐A triblock copolymers have been synthesized with a central block composed of hydrophilic poly (ethylene glycol) (PEG) and flanking hydrophobic sequences composed of five valine units terminated with end groups of varying hydrophobicity. These copolymers were constructed by adding amino acids stepwise to the hydrophilic block using solution phase chemistry. The self‐assembly behavior of all polymers was investigated using fluorimetry with a pyrene probe. In general, copolymers with more hydrophobic end groups exhibited lower critical aggregation concentrations (CACs). Fmoc‐terminated copolymers displayed the lowest CAC of 0.032 mg/mL and demonstrated little cytotoxicity when exposed to SW620 colorectal cancer cells. Transmission electron micrographs show the presence of multiple compartments within these spherical assemblies, which may prove useful in encapsulating medicinal substances. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5381–5389, 2008     

Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Poly‐(pentaerythritol adipate)‐co‐(poly ethylene glycol) Elastomers for the Sustained Release of Paclitaxel

Over the past 10 years poly‐(polyol alkanoate)s elastomers have intensively been investigated due to their extraordinary potential for soft tissue engineering applications. In this work, a family of novel hyperbranched elastomers based on pentaerythritol and adipic acid, modified with PEG of 200 and 400 Da, is synthesized. The polymers are obtained by a simple 2 steps thermal process that avoids the use of toxic catalysts. Noteworthy, elastomers properties can be finely tuned by adjusting the molar ratio of monomers and curing conditions. The elastomers, which are fully characterized by standard methods, show excellent results in the in vitro controlled release of Paclitaxel. Cell culture assays indicate that all materials are able to inhibit lung cancer cell proliferation and that the release of Paclitaxel reduce cancer cell viability, indicating that the elastomers prepared hereby are good candidates for their use as eluting systems in long term cancer treatment. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1199–1209     

Oligosaccharide-modified poly(propyleneimine) dendrimers: synthesis, structure determination, and Cu(II) complexation

The multiple application of reductive amination on primary amino groups of first and second generation poly(propyleneimine) dendrimers is used as a one-pot approach to introduce twice the amount of the oligosaccharide units as surface groups, compared to initially present amino groups in the first and second generation dendrimers. This was proven by (1)H NMR, MALDI-TOF-MS, and LILBID-MS analysis. The size of these dendrimers was determined by the hydrodynamic radius using pulsed field gradient NMR and dynamic light scattering. Molecular modeling confirmed the presence of dense-shell dendrimers. These dendrimers exhibit a generation dependent Cu(II)/dendrimer ratio in an aqueous environment, highlighting these materials as possible metal-carrier systems with a well-defined oligosaccharide protection shell for application in a biological environment.     

Interaction of silicic acid with poly(1‐vinylimidazole)

Poly(1‐vinylimidazole) reacts with silicic acid and poly(silicic acid), giving rise to water‐soluble complexes and insoluble composites because of hydrogen bonding. The composition, structure, and morphology of the obtained products have been studied with elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The main direction of the reaction depends not only on the initial ratio of the components, concentration, and pH but also on the sequence of the reagent mixing: the presence of poly(1‐vinylimidazole) macromolecules during the formation of silicic acid stabilizes soluble complexes, which precipitate with an excess of H₄SiO₄ only. These soluble complexes may serve as a pattern of particles responsible for the transport of silicic acid in diatom algae and other organisms that assimilate silicon from the environment. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 820–827, 2006     

Bioreducible and core‐crosslinked hybrid micelles from trimethoxysilyl‐ended poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide) block copolymers: Thiol‐ene click synthesis and properties

Bioreducible and core‐crosslinked hybrid micelles were for the first time fabricated from biodegradable and biocompatible trimethoxysilyl‐terminated and disulfide‐bond‐linked block copolymers poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide), which were prepared by combining thiol‐ene coupling reaction and ring‐opening polymerization. The molecular structures, physicochemical, self‐assembly, and bioreducible properties of these copolymers were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering (DLS), and transmission electron microscopy. The core‐crosslinking sol‐gel reaction was confirmed by ¹H NMR, and the core‐crosslinked hybrid micelles contained about 3 wt % of silica. The bioreducible property of both uncrosslinked and core‐crosslinked micelles in 10 mM 1,4‐dithiothreitol (DTT) solution was monitored by DLS, which demonstrated that the PEO corona gradually shedded from the PCL core. The anticancer doxorubicin drug‐loaded micelles showed nearly spherical morphology compared with blank micelles, presenting a DTT reduction‐triggered drug‐release profile at 37 °C. Notably, the core‐crosslinked hybrid micelles showed about twofold drug loading capacities and a half drug‐release rate compared with the uncross‐liked counterparts. This work provides a useful platform for the fabrication of bioreducible and core‐crosslinked hybrid micelles potential for anticancer drug delivery system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel photoactive polymer poly(vinyl alcohol)‐graft‐poly(vinyl naphthalene)

A copolymer of poly(vinyl naphthalene) grafted onto poly(vinyl alcohol) has been synthesized with nitroxide‐mediated controlled radical polymerization. By separating the processes of the generation of grafting sites and polymerization, we can avoid the formation of the homopolymer. Because of its architecture, the polymer is soluble in water, despite the high content of hydrophobic groups. The naphthalene chromophores tend to aggregate, forming hydrophobic microdomains in an aqueous solution. Those aggregates exist in a very constrained environment that leads to extraordinarily large redshifts of both the absorption and emission of the polymer. The polymer acts as an efficient photosensitizer in photoinduced electron transfer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2675–2683, 2006     

Poly(amidoamine) Conjugates Containing Doxorubicin Bound via an Acid‐Sensitive Linker

Poly(amidoamine)s with amino pendant groups were prepared by hydrogen‐transfer polyaddition of primary and secondary amines to bis‐acrylamines. Dansyl cadaverine (DC) doxorubicin (Dox) were bound to the polymers via a cis‐aconityl spacer to give conjugates containing 3 µg of DC per mg of polymer and 28 to 35 µg of Dox per mg of polymer. Release of DC and Dox at physiological and acidic pH varied from 0 to 35% over 48 h and was pH dependent. Although the ISA1Dox conjugate (IC₅₀ = 6 µg Dox · mL^?1) presented similar toxicity as the parent polymer without Dox, ISA23Dox showed increased toxicity (IC₅₀ = 10 µg Dox · mL^?1). These results suggest that ISA23Dox is able to release biologically active Dox in vitro and that this conjugate might be suitable for further development.

     

Synthesis and self‐assembly of novel amphiphilic copolymers poly(lactic acid)‐block‐poly(ascorbyl acrylate)

In this study, a novel type of amphiphilic block copolymers poly(lactic acid)‐block‐poly(ascorbyl acrylate) (PLA‐block‐PAAA) with biodegradable poly(lactic acid) as hydrophobic block and poly(ascorbyl acrylate) (PAAA) as hydrophilic block was successfully developed by a combination of ring‐opening polymerization and atom transfer radical polymerization, followed by hydrogenation under normal pressure. The chemical structures of the desired copolymers were characterized by ¹H NMR and gel permeation chromatography. The thermal physical properties and crystallinity were investigated by thermogravimetric analysis, differential scanning calorimetry, and wide angle X‐ray diffraction, respectively. Their self‐assembly behavior was monitored by fluorescence‐probe technique and turbidity change using UV–vis spectrometer, and the morphology and size of the nanocarriers via self‐assembly were detected by cryo‐transmission electron microscopy and dynamic light scattering. These polymeric micelles with PAAA shell extending into the aqueous solution have potential abilities to act as promising nanovehicles for targeting drug delivery. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and hydrolytic stability of poly(oxyethylene‐H‐phosphonate)s

Poly(oxyethylene‐H‐phosphonate)s (POE‐H‐Ps), with different poly(oxyethylene) segment lengths, were synthesized via conventional two‐stage polycondensation reaction of dimethyl‐H‐phosphonate and poly(ethylene glycols) (PEGs), with nominal molecular weights of 400, 600, and 1000 Da. The changes in the composition of the reaction mixtures during the polycondensation process were followed by size‐exclusion chromatography (SEC) and NMR. It was found that the three PEG fragments yield reproducibly POE‐H‐Ps with the following molecular weights: ～3000 Da (PEG‐400), ～6000 Da (PEG‐600), and ～10,000 Da (PEG‐1000) as measured by SEC, NMR, and VPO. The hydrolytic behavior of POE‐H‐Ps upon storage and in aqueous media with pH 3, 7.4, and 8 was studied for the first time by a combination of NMR and SEC. It was found that the long‐term stability of the polymers in dry state depends on the length of the PEG fragments and decreased in the following order: POE‐H‐P_(PEG‐1000) > POE‐H‐P_(PEG‐600) > POE‐H‐P_(PEG‐400). The hydrolytic transformation of the polymers in aqueous media is affected mostly by the pH of the solution. The degradation products are PEG fragments containing phosphonate end groups—an important prerequisite for the usage of the POE‐H‐Ps as nontoxic drug delivery vehicles and in vivo precursors for PEGylated prodrugs. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4130–4139, 2008     

Amphiphilic diblock copolymers based on poly(2‐ethyl‐2‐oxazoline) and poly(4‐substituted‐ε‐caprolactone): Synthesis,characterization, and cellular uptake

Amphiphilic diblock copolymers with various block compositions were synthesized on poly(2‐ethyl‐2‐oxazoline) (PEtOz) as a hydrophilic block and poly(4‐methyl‐ε‐caprolactone) (PMCL) or poly(4‐phenyl‐ε‐caprolactone) (PBCL) as a hydrophobic block. These PEtOz‐b‐PMCL and PEtOz‐b‐PBCL copolymers consisting of soft domains of amorphous PEtOz and PM(B)CL had no melting endothermal peaks but displayed T_g. The lower critical solution temperature (LCST) values for the PEtOz‐b‐PMCL, and the PEtOz‐b‐PBCL aqueous solution were observed to shift to lower temperature than PEtOz homopolymers. Their aqueous solutions were characterized using fluorescence techniques and dynamic light scattering (DLS). The block copolymers formed micelles with critical micelle concentrations (CMCs) in the range 0.6–11.1 mg L^?1 in an aqueous phase. As the length of the hydrophobic PMCL or PBCL blocks elongated, lower CMC values were generated. The mean diameters of the micelles were between 127 and 318 nm, with PDI in the range of 0.06–0.21, suggesting nearly monodisperse size distributions. The drug entrapment efficiency and drug‐loading content of micelles depend on block polymer compositions. In vitro cell viability assay showed that PEtOz‐b‐PMCL has low cytotoxicity. Doxorubicin hydrochloride (DOX)‐loaded micelles facilitated human cervical cancer (HeLa) cell uptake of DOX; uptake was completed within 2 h, and DOX was able to reach intracellular compartments and enter the nuclei by endocytosis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2769–2781     

Synthesis and micellization of star‐like hyperbranched polymer with poly(ethylene oxide) and poly(ε‐caprolactone) arms

Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. ¹H, ¹³C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008