Versatile functionalization of polyester hydrogels with electroactive aniline oligomers

Functionalizing aliphatic polyester hydrogels with an aniline oligomer is a means of achieving electrically conductive and degradable hydrogels. To lower the aniline oligomer content while maintaining a high conductivity and to overcome the acidic degradation product from polylactide reported in our previous work, a series of electroactive and degradable hydrogels based on polycaprolactone (PCL) hydrogels and carboxyl‐capped aniline pentamer (CCAP) were synthesized by a simple coupling reaction at room temperature. The reaction was carried out between the hydroxyl groups of hydroxyethylmethacrylate in a photopolymerized glycidyl methacrylate (GMA)‐functionalized PCL‐poly(ethylene glycol)‐PCL degradable network and carboxyl group of CCAP, using 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide as water‐condensing agent and 4‐dimethylaminopyridine as catalyst. The electroactivity of the hydrogels was verified by cyclic voltammetry, which showed three pairs of redox peaks. The electrical conductivities and swelling ratios of these hydrogels were controlled by the CCAP content, the poly(ethylene glycol) molecular weight in the macromer, and the crosslinking density of the hydrogels. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Characterization of PEG‐Based Drug‐Responsive Biohybrid Hydrogels

Interactive materials being responsive to a biocompatible stimulus represent a promising approach for future therapeutic applications. In this study, we present a novel biohybrid material synthesized from biocompatible components being stimulus‐responsive to the pharmaceutically approved small‐molecule novobiocin. The hydrogel design is based on the gyrase B (GyrB) protein, which is covalently grafted to multi‐arm polyethylene glycol (PEG) using a Michael‐type addition reaction. Upon addition of the GyrB‐dimerizing substance coumermycin, stable hydrogels form which can be dissolved in a dose‐adjustable manner by the antibiotic novobiocin. The switchable properties of this PEG‐based hydrogel are favorable for future applications in tissue engineering and as externally controlled drug depot.     

Living cationic polymerization of an azide‐containing vinyl ether toward addressable functionalization of polymers

We first achieved the living cationic polymerization of azide‐containing monomer, 2‐azidoethyl vinyl ether (AzVE), with SnCl₄ as a catalyst (activator) in conjunction with the HCl adduct of a vinyl ether [H‐CH₂CH(OR)‐Cl; R ? CH₂CH₂Cl, CH₂CH(CH₃)₂]. Despite the potentially poisoning azide group, the produced polymers possessed controlled molecular weights and fairly narrow distributions (M_w/M_n ～ 1.2) and gave block polymers with 2‐chloroethyl vinyl ether. The pendent azide groups are easily converted into various functional groups via mild and selective reactions, such as the Staudinger reduction and copper‐catalyzed azide‐alkyne 1,3‐cycloaddition (CuAAC; a “click” reaction). These reactions led to quantitative pendent functionalization into primary amine (? NH₂), hydroxy (? OH), and carboxyl (? COOH) groups, at room temperature and without any acidic or basic treatment. Thus, poly(AzVE) is a versatile precursor for a wide variety of functional vinyl ether polymers with well‐defined structures and molecular weights. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1449–1455, 2010     

Chemical conjugation of linear and cyclic RGD moieties to a recombinant elastin-mimetic polypeptide--a versatile approach towards bioactive protein hydrogels

An elastin-mimetic polypeptide, (EMM)(7), with the amino-acid sequence GRDPSS [VPGVG VPGKG VPGVG VPGVG VPGEG VPGIG](7) was used for chemical conjugation of various integrin ligands (RGD peptides) to prepare bioactive hydrogels. The chemical approach involved (1) chemical protection of lysine residues with Fmoc or Boc groups, (2) chemical ligation of a protected linear or cyclic RGD ligand, with or without a hexanoic-acid spacer to the glutamic acid residue, (3) deprotection of the lysine functionalities and the RGD moieties and (4) cross-linking to form a bioactive hydrogel. (1)H NMR spectroscopy was used to quantify the multiple steps in the reaction. The chemical protection was found to be between 65 and 93% for Fmoc and Boc, respectively. The ligands studied included linear RGD cell-binding [H-FGRGDS-OH (1-l-RGD), H-Ahx--FGRGDS-OH (2-Ahx-FGRGDS) and a cyclic -H(2)N-(CH(2))(6)COHN-cyclo(-RGDfK-) (H-Ahx-c(-RGDfK-)) peptide also with a hexanoic-acid spacer. Cell adhesion with mouse osteoblast cells was dependent on the ligand type, ligand density and the use of a spacer.     

Versatile ω‐end group functionalization of RAFT polymers using functional methane thiosulfonates

Five different polymers, poly[methyl methacrylate] (PMMA), poly[lauryl methacrylate] (PLMA), poly[diethylene glycol methacrylate] (PDEGMA), poly[N‐isopropylacrylamide] (PNIPA), and poly[styrene] (PS) prepared by the RAFT process and thus terminated with dithioesters were aminolyzed in the presence of S‐3‐butynyl methane thiosulfonate (MTS), which was synthesized in two steps. Analysis of the polymers by 2D NMR, UV–vis absorbance, and gel permeation chromatography revealed them to quantitatively carry acetylene end groups connected with disulfide bridges, indicating that functional MTS reagents can be employed for end group functionalization of RAFT polymers. This versatile method is of advantage compared with conjugations with functional maleimides, where isolation of terminal thiols is often required but inexpedient for poly[(meth)acrylates] because their terminal thiols may undergo backbiting and thus avoid conjugation. The acetylene‐terminated polymers were bound to an azide functionalized glass surface in a Cu(I) catalyzed cycloaddition. The modified surfaces exhibited water contact angles corresponding to the polarity of the attached polymers. In the case of the stimulus responsive polymers PNIPA and PDEGMA, the surfaces showed temperature‐dependent contact angles. The disulfide bond connecting the polymers to the surface could be selectively cleaved and resulted in all surfaces having the same contact angle, independent of the nature of the polymer prior attached to the surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3118–3130, 2009     

Versatile functionalization of aromatic polysulfones via thiol‐ene click chemistry

A facile, efficient approach for preparation of functionalized aromatic polysulfones by postpolymerization modification with thiol‐ene click chemistry is described. The key synthetic strategy is to incorporate a pendant vinyl ether group into polysulfones as a reactive precursor with controlled degrees of functionalization. Synthetic utility of the pendant alkenyl group is demonstrated by generating diverse polymer derivatives using thiol‐ene functionalization including glycosylated polysulfone. The highly reactive alkene platform in the polymer affords convenient, metal‐free, and azide‐free click transformations to create diverse ranges of new functionalized polysulfones that could be applied in various applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3237–3243     

Thio‐bromo “Click,” post‐polymerization strategy for functionalizing ring opening metathesis polymerization (ROMP)‐derived materials

The use of a thio‐bromo click strategy as an efficient postpolymerization tool is described. Norbornene derivatives bearing an α‐bromo ester could be polymerized using Grubbs 2^nd generation initiator to provide α‐bromo ester‐containing homo‐and block copolymers that could be efficiently functionalized through reactions with various thiols. A one‐pot strategy was also used, in which up to four different thiols were reacted simultaneously. This chemistry could also be used as an efficient cross‐linking strategy to form ROMP‐based gels as well as a tool for terminal functionalization of polypropylene‐based oligomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 179–185     

Functionalizable biodegradable photocrosslinked elastomers based on 2‐oxepane‐1,5‐dione

The use of aliphatic polyesters for biomedical applications is limited by the lack of functionality of their backbones. The aim of the following study was to develop a novel elastic scaffold material containing functional groups to be used for future derivatization to tether peptide ligands to support cell adhesion, migration, and differentiation. The elastomer was based on three‐arm star copolymers composed of ε‐caprolactone and a functionalized ε‐caprolactone, 2‐oxepane‐1,5‐dione, and end‐terminated with acrylate groups. The elastomer thus contains a ketone and two approaches were examined for obtaining a photocrosslinkable elastomer containing functional groups: crosslinking followed by ketone reduction using sodium borohydride to generate pendant hydroxyl groups, and reaction of the ketone with hydrazines. Reduction of the ketone lead to degradation of the elastomer through transesterification and ethanolate mediated cleavage of the polymer backbone. Reaction with hydrazines did not degrade the polymer and resulted in efficient functionalization of the elastomer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8191–8199, 2008     

Click Functionalization of a Dibenzocyclooctyne‐Containing Conjugated Polyimine

A conjugated poly(phenyl‐co‐dibenzocyclooctyne) Schiff‐base polymer, prepared through polycondensation of dibenzocyclooctyne bisamine (DIBO‐(NH₂)₂) with bis(hexadecyloxy)phenyldialdehyde, is reported. The resulting polymer, which has a high molecular weight (M_n>30 kDa, M_w>60 kDa), undergoes efficient strain‐promoted alkyne–azide cycloaddition reactions with a series of azides. This enables quantitative modification of each repeat unit within the polymer backbone and the rapid synthesis of a conjugated polymer library with widely different substituents but a consistent degree of polymerization (DP). Kinetic studies show a second‐order reaction rate constant that is consistent with monomeric dibenzocyclooctynes. Grafting with azide‐terminated polystyrene and polyethylene glycol monomethyl ether chains of varying molecular weight resulted in the efficient syntheses of a series of graft copolymers with a conjugated backbone and maximal graft density.     

Aza‐Michael addition reaction: Post‐polymerization modification and preparation of PEI/PEG‐based polyester hydrogels from enzymatically synthesized reactive polymers

The utility of aza‐Michael addition chemistry for post‐polymerization functionalization of enzymatically prepared polyesters is established. For this, itaconate ester and oligoethylene glycol are selected as monomers. A Candida Antarctica lipase B catalyzed polycondensation reaction between the two monomers provides the polyesters, which carry an activated carbon‐carbon double bond in the polymer backbone. These electron deficient alkenes represent suitable aza‐Michael acceptors and can be engaged in a nucleophilic addition reaction with small molecular mono‐amines (aza‐Michael donors) to yield functionalized linear polyesters. Employing a poly‐amine as the aza‐Michael donor, on the other hand, results in the formation of hydrophilic polymer networks. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 745–749     

Click chemistry in materials synthesis. III. Metal‐adhesive polymers from Cu(I)‐catalyzed azide–alkyne cycloaddition

1,2,3‐Triazole‐based polymers generated from the Cu(I)‐catalyzed cycloaddition between multivalent azides and acetylenes are effective adhesive materials for metal surfaces. The adhesive capacities of candidate mixtures of azide and alkyne components were measured by a modified peel test, using a customized adhesive tester. A particularly effective tetravalent alkyne and trivalent azide combination was identified, giving exceptional strength that matches or exceeds the best commercial formulations. The addition of Cu catalyst was found to be important for the synthesis of stronger adhesive polymers when cured at room temperature. Heating also accelerated curing rates, but the maximum adhesive strengths achieved at both room temperature and high temperature were the same, suggesting that crosslinking reaches the same advanced point in all cases. Polytriazoles also form adhesives to aluminum, but copper is bound more effectively, presumably because active Cu(I) ions may be leached from the surface to promote crosslinking and adhesion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5182–5189, 2007     

End‐group functionalization and postpolymerization modification of helical poly(isocyanide)s

This contribution presents the synthesis of helical alkyne‐terminated polymers using a functionalized Nickel complex to initiate the polymerization of menthylphenyl isocyanides. The resulting polymers display low dispersities and controlled molecular weights. Copper‐catalyzed azide/alkyne cycloadditions (CuAAC) are performed to attach various azide‐containing compounds to the polymer termini. After azido‐phosphonate moiety attachment the polymer displays a signal at 25.4 ppm in the ³¹P NMR spectrum demonstrating successful end‐group functionalization. End‐group functionalization of a fluorescent dye allows to determine the functionalization yield as 89% (±8). Successful ligation of an azide‐functionalized peptide sequence (M_KLA = 1547 g/mol) increases the M_n from 5100 for the parent polymer to 6700 for the bioconjugate as visualized by GPC chromatography. Analysis by CD spectroscopy confirms that the helical conformation of the poly(isocyanide) block in the peptide–polymer conjugate is maintained after postpolymerization modification. These results demonstrate an easy, generalizable, and versatile strategy toward mono‐telechelic helical polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2766–2773     

Increasing the hydrophilicity of star‐shaped amphiphilic co‐networks by using of PEG and dendritic s‐PCL cross‐linkers

New hyperbranched hydrophobic cross‐linkers with peripheral azide groups were synthesized as follows: First, star‐shaped polycaprolactones (sPCL) were synthesized by ring‐opening polymerization of caprolactone in the presence of pentaerythritol and tin (II) octoate. In the next step, sequential acrylation, Micheal addition, tosylation, and azidation by acryloyl chloride, diethanol amine, tosyl chloride, and sodium azide were respectively exploited to synthesize azide‐functionalized hyperbranched star‐shaped polycaprolactones which were named sPCL‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐N₃) and sPCL‐acrylate‐diethanolamine‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐AC‐N₃). All steps were thoroughly characterized by FT‐IR and ¹H NMR spectroscopy. The GPC analysis showed that the molecular weight of sPCL increased after two azide functionalizations. Amphiphilic hydrogels based on sPCL‐AC‐DEA‐N₃ (M_n = 8130 g/mol) and sPCL‐AC‐DEA‐AC‐N₃ (M_n = 10112 g/mol) with linear alkyne‐terminated polyethylene glycols (PEG) (M_n = 2000, 4000, and 6000 g/mol) were synthesized through click coupling between azide and alkyne groups. In both hydrogels, the swelling ratio increased by increasing the molecular weight of PEG. The obtained results showed that the branching of the cross‐linker, significantly affected the swelling ratio of hydrogels. For instance, the swelling ratio of sPCL‐AC‐DEA‐AC‐N₃ and PEG‐6000 (Q = 900) was higher than sPCL‐AC‐DEA‐N₃ and PEG‐6000 (Q = 600). Despite the high cross‐linking density of sPCL‐AC‐DEA‐AC‐DEA‐N₃–based hydrogels, the amount of released theophylline was higher than sPCL‐AC‐DEA‐N₃–based hydrogels, due to the high content of PEG in these hydrogels.     

Preparation of Lanthanide‐Polymer Composite Material via Click Chemistry

Covalently attaching lanthanide complexes to the polymer backbone can effectively reduce the clustering of lanthanides and thus become an important strategy to fully unleash their potential. In this Communication, a metal‐free click reaction is used for the first time to link a lanthanide complex to the polymer matrix. A diene‐bearing copolymer with anthracenylmethyl methacrylate as a monomer and a dienophile‐bearing lanthanide complex with 5‐maleimido‐1,10‐phenanthroline as the second ligand are synthesized and coupled together through a Diels–Alder cycloaddition (DA). A comparative investigation demonstrates that the composite material prepared by DA click reaction shows the highest quantum yields in the same lanthanide concentration as compared to materials prepared by widely used “directly doping” and “in situ coordinating lanthanide ions with macromolecular ligand” approaches. This work suggests that the “metal‐free” DA click reaction can be a promising tool in the synthesis of high efficient lanthanide functionalized polymeric materials.

     

Stimuli‐responsive antifouling polyisobutylene‐based biomaterials via modular surface functionalization

This article demonstrates a new, modular approach to surface functionalization that harnesses chain entanglement. A layer of functionalized polyisobutylene, (PIB)‐ω, where ω = ‐OH, ‐thymine (T), ‐hexaethylene glycol (HEG), poly(ethylene glycol) (‐PEG‐OH), methoxy‐functionalized poly(ethylene glycol) (‐PEG‐OCH₃), and ‐tetraethylene glycol‐α‐lipoate (TEG‐αL) was adhered to PIB‐based thermoplastic elastomer (TPE) surfaces. X‐ray photoelectron spectroscopy (XPS) at angles ranging from 20° to 75° showed decreasing polar group concentration with increasing penetration depth, confirming segregation of polar groups toward the surface. Water contact angle (WCA) of the PIB‐based TPE dropped from 95° to 79°?83° upon coating, and soaking in water for 24 h further decreased the WCA. Dynamic WCA measurements showed 40–30° receding angles, showing that stimulus from an aqueous environment elicits enrichment of polar groups on the surface. Fibrinogen (Fg) adsorption on the various surfaces was quantified using surface plasmon resonance (SPR). Static and dynamic WCA did not vary significantly among TPE + PIB‐ω surfaces, but there were dramatic differences in Fg adsorption: 256 ng/cm² was measured on the native TPE, which dropped to 40 and 22 ng/cm² on PIB‐PEG‐OCH₃ and PIB‐PEG‐OH‐coated surfaces. PIB‐TEG‐αL‐coated surfaces presented the lowest Fg adsorption with 14 ng/cm². © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1742–1749     

Sequential Control over Thiol Click Chemistry by a Reversibly Photoactivated Thiol Mechanism of Spirothiopyran

A novel photocontrolled thiol click chemistry based on spirothiopyran and maleimide is reported. Upon irradiation with λ=365 nm light, the spirothiopyran can isomerize to the open merocyanine form, a thiophenolate group, which can rapidly react with maleimide. The unreacted MC will readily isomerize back to the starting spirothiopyran, which can be repeatedly photoactivated as needed. Thus, this reversible photoactivated thiol confers spatiotemporal sequential control on the thiol–maleimide reaction using only one type of photochemical reaction. Polymer post‐functionalization and hydrogel building with subsequent multipatterning using different maleimide molecules in a temporal sequential manner indicate that this photocontrolled Michael addition reaction can modulate the specific chemical events in a sequence.     

Click coupled graphene for fabrication of high‐performance polymer nanocomposites

An effective technique of using click coupled graphene to obtain high‐performance polymer nanocomposites is presented. Poly(ε‐caprolactone) (PCL)‐click coupled graphene sheet (GS) reinforcing fillers are synthesized by the covalent functionalization of graphene oxide with PCL, and subsequently the PCL‐GS as a reinforcing filler was incorporated into a shape memory polyurethane matrix by solution casting. The PCL‐click coupled GS has shown excellent interaction with the polyurethane matrix, and as a consequence, the mechanical properties, thermal stability, thermal conductivity, and thermo‐responsive shape memory properties of the resulting nanocomposite films could be enhanced remarkably. In particular, for polyurethane nanocomposites incorporated with 2% PCL‐GS, the breaking stress, Young's modulus, elongation‐at‐break, and thermal stability have been improved by 109%, 158%, 28%, and 71 °C, respectively. This click coupling protocol offers the possibility to fully combine the extraordinary performance of GSs with the properties of polyurethane. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Thiol‐epoxy “click” chemistry: Application in preparation and postpolymerization modification of polymers

Base‐catalyzed reaction between a thiol and an epoxide group is a simple fusion process that leads to the formation of a β‐hydroxythio‐ether linkage. This reaction is efficient, regio‐selective, and fast. In addition, it produces a reactive hydroxyl group upon completion. Therefore, it is of considerable potential in synthesis of reactive and functional soft materials. Here, we discuss the fundamental aspects of this process, the so‐called thiol‐epoxy “click” reaction, and its utility in the preparation and post‐polymerization functionalization of polymers and crosslinked networks. Furthermore, its application in surface modification of solid substrates is also considered. Finally, utility of multifunctional materials created using the thiol‐epoxy reaction is discussed in the biomedical arena. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3057–3070