锂电池用嵌段共聚物电解质的研究进展

离子导体嵌段共聚物电解质作为一种固态锂电池导离子材料引起了人们的广泛关注。嵌段共聚物的自组装行为为设计微观尺寸有序结构提供了一种可能。这种有序纳米结构既保证聚合物电解质良好的机械性能,同时又拥有与其它聚合物电解质相当的离子电导率,为进一步组装高性能、易加工的锂电池器件提供了一种可能。本文综述了聚氧化乙烯型嵌段共聚物和单离子型嵌段共聚物,并总结了近期嵌段共聚物电解质的形貌影响离子电导率的实验研究结果,最后评述了嵌段共聚物电解质面临的挑战,并对未来研究进行了展望。     

用于锂离子电池聚合物电解质的组成、结构和性能

聚合物电解质是全固态锂离子电池的重要组成部分, 其电导率对电池的性能有很重要的影响.本文综述了聚合物电解质的组成、结构和性能对锂 离子电池导电率影响的最新研究进展,特别是介绍了聚合物-碱金属盐复合电解质和聚离子体电解质两个体系的研究进展.     

Superionic conductivity in lithium-rich anti-perovskites

Lithium ion batteries have shown great promise in electrical energy storage with enhanced energy density, power capacity, charge-discharge rates, and cycling lifetimes. However common fluid electrolytes consisting of lithium salts dissolved in solvents are toxic, corrosive, or flammable. Solid electrolytes with superionic conductivity can avoid those shortcomings and work with a metallic lithium anode, thereby allowing much higher energy densities. Here we present a novel class of solid electrolytes with three-dimensional conducting pathways based on lithium-rich anti-perovskites (LiRAP) with ionic conductivity of σ > 10(-3) S/cm at room temperature and activation energy of 0.2-0.3 eV. As temperature approaches the melting point, the ionic conductivity of the anti-perovskites increases to advanced superionic conductivity of σ > 10(-2) S/cm and beyond. The new crystalline materials can be readily manipulated via chemical, electronic, and structural means to boost ionic transport and serve as high-performance solid electrolytes for superionic Li(+) conduction in electrochemistry applications.     

Lithium Ion Pathway within Li7La3Zr2O12‐Polyethylene Oxide Composite Electrolytes

Polymer–ceramic composite electrolytes are emerging as a promising solution to deliver high ionic conductivity, optimal mechanical properties, and good safety for developing high‐performance all‐solid‐state rechargeable batteries. Composite electrolytes have been prepared with cubic‐phase Li₇La₃Zr₂O₁₂ (LLZO) garnet and polyethylene oxide (PEO) and employed in symmetric lithium battery cells. By combining selective isotope labeling and high‐resolution solid‐state Li NMR, we are able to track Li ion pathways within LLZO‐PEO composite electrolytes by monitoring the replacement of ⁷Li in the composite electrolyte by ⁶Li from the ⁶Li metal electrodes during battery cycling. We have provided the first experimental evidence to show that Li ions favor the pathway through the LLZO ceramic phase instead of the PEO‐LLZO interface or PEO. This approach can be widely applied to study ion pathways in ionic conductors and to provide useful insights for developing composite materials for energy storage and harvesting.     

Materials Design Principles for Air‐Stable Lithium/Sodium Solid Electrolytes

Sulfide solid electrolytes are promising inorganic solid electrolytes for all‐solid‐state batteries. Despite their high ionic conductivity and desirable mechanical properties, many known sulfide solid electrolytes exhibit poor air stability. The spontaneous hydrolysis reactions of sulfides with moisture in air lead to the release of toxic hydrogen sulfide and materials degradation, hindering large‐scale manufacturing and applications of sulfide‐based solid‐state batteries. In this work, we systematically investigate the hydrolysis and reduction reactions in Li‐ and Na‐containing sulfides and chlorides by applying thermodynamic analyses based on a first principles computation database. We reveal the stability trends among different chemistries and identify the effect of cations, anions, and Li/Na content on moisture stability. Our results identify promising materials systems to simultaneously achieve desirable moisture stability and electrochemical stability, and provide the design principles for the development of air‐stable solid electrolytes.     

锂无机固体电解质*

全固态锂离子二次电池具有更大能量密度和更高的安全使用性能,在未来的电动汽车和蓄能电站上有很好的应用前景。本文对一些典型的锂无机固体电解质进行分类讨论,对它们的性能、结构和导电机理进行评述。这些固体电解质具有较高的离子导电率,是目前的研究热点。文章总结了影响其导电率的几个重要因素以及作为理想锂无机固体电解质的几个基本要求。     

Data‐Driven Materials Exploration for Li‐Ion Conductive Ceramics by Exhaustive and Informatics‐Aided Computations

Interest in all‐solid‐state Li‐ion batteries (LIBs) using non‐flammable Li‐conducting ceramics as solid electrolytes has increased, as safe and robust batteries are urgently desired as power sources for (hybrid) electric vehicles. However, the low Li‐ion conductivities of ceramics have hindered all‐solid‐state LIB commercialization; many researchers have attempted to develop fast Li‐ion conductors. We introduce two efficient high‐throughput computational approaches for materials exploration: (i) exhaustive search and (ii) informatics‐aided prediction. For demonstration, ～400 Li‐ and Zn‐containing oxide (Li?Zn?X?O) compounds of varied crystal structures are extracted from Materials Project datasets. We calculate the migration energies for Li‐ion conduction and the phase stabilities (decomposition energies) of these materials by simulation and apply Bayesian optimization to determine the material with the highest ionic conductivity. The results show much greater efficiency than a random search algorithm.     

Lithium Chlorides and Bromides as Promising Solid‐State Chemistries for Fast Ion Conductors with Good Electrochemical Stability

Enabling all‐solid‐state Li‐ion batteries requires solid electrolytes with high Li ionic conductivity and good electrochemical stability. Following recent experimental reports of Li₃YCl₆ and Li₃YBr₆ as promising new solid electrolytes, we used first principles computation to investigate the Li‐ion diffusion, electrochemical stability, and interface stability of chloride and bromide materials and elucidated the origin of their high ionic conductivities and good electrochemical stabilities. Chloride and bromide chemistries intrinsically exhibit low migration energy barriers, wide electrochemical windows, and are not constrained to previous design principles for sulfide and oxide Li‐ion conductors, allowing for much greater freedom in structure, chemistry, composition, and Li sublattice for developing fast Li‐ion conductors. Our study highlights chloride and bromide chemistries as a promising new research direction for solid electrolytes with high ionic conductivity and good stability.     

Challenges and Development of Composite Solid Electrolytes for All-solid-state Lithium Batteries

All-solid-state lithium batteries are considered to be a new battery system with great development potential and application prospects due to the advantages of high energy density and high security.As a key component of all-solid-state lithium batteries,the development of solid-state electrolytes has received extensive attention in recent years,but most solid electrolytes still exhibit problems,such as low ion conductivity and poor interface compatibility.The design of composite solid-state electrolyte materials with both excellent electrochemical and mechanical properties is an effective way to develop all-solid-state lithium batteries.This review introduces different types of pure component solid electrolytes and analyzes their respective advantages and characteristics firstly.Furthermore,the research progress of composite electrolytes in preparation method,ionic conduction,suppression of lithium dendrites,and the improvement of electrochemical performances are reviewed from the perspective of composite electrolyte structure design,which is to meet different performance requirements.And the future development direction and trend of composite electrolytes are prospected.     

锂/钠离子电池材料的固体核磁共振研究进展

固体核磁共振技术是一种定量分析固体材料结构与组成的强有力手段,结合固体核磁共振和常规x-射线衍射(XRD)、 x-射线吸收谱(XAS)等表征方法可对锂/钠离子电池材料在电化学反应中的结构演化过程进行全面的分析. 例如通过固体核磁共振研究, 可获得不同合成与修饰条件下, 锂/钠离子电池电极和电解质材料体相以及电极/电解质界面层的化学组成、局域结构和离子扩散动力学等信息,为高性能电池材料的设计和研发提供重要的基础数据. 本文结合本课题组的研究工作,综述了近三年来国内外固体核磁共振技术在锂/钠离子电池电极、电解质材料以及固体电解质界面膜（SEI）研究中的应用和进展.     

Ionic‐Liquid‐Based Polymer Electrolytes for Battery Applications

The advent of solid‐state polymer electrolytes for application in lithium batteries took place more than four decades ago when the ability of polyethylene oxide (PEO) to dissolve suitable lithium salts was demonstrated. Since then, many modifications of this basic system have been proposed and tested, involving the addition of conventional, carbonate‐based electrolytes, low molecular weight polymers, ceramic fillers, and others. This Review focuses on ternary polymer electrolytes, that is, ion‐conducting systems consisting of a polymer incorporating two salts, one bearing the lithium cation and the other introducing additional anions capable of plasticizing the polymer chains. Assessing the state of the research field of solid‐state, ternary polymer electrolytes, while giving background on the whole field of polymer electrolytes, this Review is expected to stimulate new thoughts and ideas on the challenges and opportunities of lithium‐metal batteries.     

Polymer electrolyte for lithium batteries based on photochemically crosslinked poly(ethylene oxide) and ionic liquid

Polymer/ionic liquid composites were investigated as solvent-free electrolytes for lithium batteries. Ternary electrolytes based upon poly(ethylene oxide), an ionic liquid and a conducting salt were UV crosslinked with benzophenone as the photoinitiator. Crosslinking leads to an increase in mechanical stability of the PEO composites. This straight-forward process provides a way to increase the content of ionic liquid and thus to raise ionic conductivity without loss of mechanical stability. Impedance measurements showed that the ionic conductivity of the composites is not affected by the UV curing process. Moreover, the UV curing process causes a decrease in the degree of crystallinity in the PEO composites which contributes to an increase in ionic conductivity. The present work is related to safety issues of lithium batteries.     

Realisation of an all solid state lithium battery using solid high temperature plastic crystal electrolytes exhibiting liquid like conductivity

Replacement of volatile and combustible electrolytes in conventional lithium batteries is desirable for two reasons: safety concerns and increase in specific energy. In this work we consider the use of an ionic organic plastic crystal material (IOPC), N-ethyl-N-methylpyrrolidinium tetrafluoroborate, [C2mpyr][BF(4)], as a solid-state electrolyte for lithium battery applications. The effect of inclusion of 1 to 33 mol% lithium tetrafluoroborate, LiBF(4), into [C2mpyr][BF(4)] has been investigated over a wide temperature range by differential scanning calorimetry (DSC), impedance spectroscopy, cyclic voltammetry and cycling of full Li|LiFePO(4) batteries. The increases in ionic conductivity by orders of magnitude observed at higher temperature are most likely associated with an increase in Li ion mobility in the highest plastic phase. At concentrations >5 mol% LiBF(4) the ionic conductivity of these solid-state composites is comparable to the ionic conductivity of room temperature ionic liquids. Galvanostatic cycling of Li|Li symmetrical cells showed that the reversibility of the lithium metal redox reaction at the interface of this plastic crystal electrolyte is sufficient for lithium battery applications. For the first time we demonstrate an all solid state lithium battery incorporating solid electrolytes based on IOPC as opposed to conventional flammable organic solvents.     

Vacancy‐Controlled Na+ Superion Conduction in Na11Sn2PS12

Highly conductive solid electrolytes are crucial to the development of efficient all‐solid‐state batteries. Meanwhile, the ion conductivities of lithium solid electrolytes match those of liquid electrolytes used in commercial Li⁺ ion batteries. However, concerns about the future availability and the price of lithium made Na⁺ ion conductors come into the spotlight in recent years. Here we present the superionic conductor Na₁₁Sn₂PS₁₂, which possesses a room temperature Na⁺ conductivity close to 4 mS cm^?1, thus the highest value known to date for sulfide‐based solids. Structure determination based on synchrotron X‐ray powder diffraction data proves the existence of Na⁺ vacancies. As confirmed by bond valence site energy calculations, the vacancies interconnect ion migration pathways in a 3D manner, hence enabling high Na⁺ conductivity. The results indicate that sodium electrolytes are about to equal the performance of their lithium counterparts.     

Self‐Healable Solid Polymeric Electrolytes for Stable and Flexible Lithium Metal Batteries

The key issue holding back the application of solid polymeric electrolytes in high‐energy density lithium metal batteries is the contradictory requirements of high ion conductivity and mechanical stability. In this work, self‐healable solid polymeric electrolytes (SHSPEs) with rigid‐flexible backbones and high ion conductivity are synthesized by a facile condensation polymerization approach. The all‐solid Li metal full batteries based on the SHSPEs possess freely bending flexibility and stable cycling performance as a result of the more disciplined metal Li plating/stripping, which have great implications as long‐lifespan energy sources compatible with other wearable devices.     

Comparison of Li+‐ion conductivity in linear and crosslinked poly(ethylene oxide)

Polymer electrolytes are of tremendous importance for applications in modern lithium‐ion (Li⁺‐ion) batteries due to their satisfactory ion conductivity, low toxicity, reduced flammability, as well as good mechanical and thermal stability. In this study, the Li⁺‐ion conductivity of well‐defined poly(ethylene oxide) (PEO) networks synthesized via copper(I)‐catalyzed azide–alkyne cycloaddition is investigated by electrochemical impedance spectroscopy after addition of different lithium salts. The ion conductivity of the network electrolytes increases with increasing molar mass of the PEO chains between the junction points which is completely opposite to the behavior of their respective uncrosslinked linear precursors. Obviously, this effect is directly related to the segmental mobility of the PEO chains. Furthermore, the ion conductivity of the network electrolytes under investigation increases also with increasing size of the anion of the added lithium salt due to a weaker anti‐plasticizing effect of the more bulky anions. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 21–28     

聚碳酸酯基固态聚合物电解质的研究进展

液态锂离子电池由于采用易泄露、易挥发、易燃烧的碳酸酯有机溶剂,在高温或极端条件下使用时,存在极大的安全隐患.使用固态电解质替代液态电解液,可以从根本上避免此类安全问题的发生,与此同时还可以大幅度提升固态锂电池的能量密度.固态电解质又分为无机固态电解质和聚合物固态电解质2大类.无机固态电解质能够在宽的温度范围内保持化学稳定性,并且电化学窗口较宽,机械强度更高,室温离子电导率较高,但脆性较大,柔韧性差,制备工艺复杂,成本较高.聚合物固态电解质,室温离子电导率偏低,难以满足室温锂离子电池的应用,但其加工成型容易,形状可变.比较而言,固态聚合物电解质,更适宜大规模生产,离产业化相对更近.固态聚合物电解质中研究较多的是聚醚基固态聚合物电解质(如聚环氧乙烷和聚环氧丙烷),但其缺点是室温离子电导率低,需要对其改性或进一步开发综合性能更加优异的其他固态聚合物电解质.聚碳酸酯基固态聚合物电解质由于其特殊的分子结构(含有强极性碳酸酯基团)以及高介电常数,可以有效减弱阴阳离子间的相互作用,提高载流子数量,从而提高离子电导率,因此被认为是一类非常有前途的固态聚合物电解质体系.基于此,本文重点综述了最近研究热点的聚碳酸酯基固态聚合物电解质,包括聚(三亚甲基碳酸酯)体系、聚(碳酸丙烯酯)体系、聚(碳酸乙烯酯)体系和聚(碳酸亚乙烯酯)体系等,并详细阐述了上述每种聚碳酸酯基固态聚合物电解质的制备、电化学性能、优缺点及改性手段,归纳出其离子配位-解配位过程和离子扩散机制,还对聚碳酸酯基固态聚合物电解质的未来发展方向和研究趋势望进行了预测和展望.     

高锂离子电导的有机-无机复合电解质的渗流结构设计

固态聚合物电解质被认为是解决传统液态锂金属电池安全隐患和循环性能的关键材料,但仍然存在离子电导率低,界面兼容性差等问题。近年来,基于无机填料与聚合物电解质的高锂离子电导的有机-无机复合电解质备受关注。根据渗流理论,有机-无机界面被认为是复合电解质离子电导率改善的主要原因。因此,设计与优化有机-无机渗流界面对提高复合电解质离子电导率具有重要意义。本文从渗流结构的设计出发,综述了不同维度结构的无机填料用于高锂离子电导的有机-无机复合电解质的研究进展,并对比分析了不同渗流结构的优缺点。基于上述评述,展望了有机-无机复合电解质的未来发展趋势和方向。     

Conductive networked polymer gel electrolytes composed of poly(meth)acrylate,lithium salt,and ionic liquid

Self‐standing films of (meth)acrylate‐based polymer gel electrolytes with high ionic liquid content (80 wt %) were prepared by in situ thermally or photo induced radical copolymerization of mono‐functional and di‐functional (meth)acrylates in an ionic liquid in the presence/absence of a lithium salt. Their ionic conductivity, thermal property, mechanical property, and flammability were examined. 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI) or 1‐ethyl‐3‐methylimidazolium bis(fluorosulfonyl)imide (EMImFSI) was used as the ionic liquid, and lithium bis(trifluoromethanesulfonyl)imide LiTFSI was used as the lithium salt. The obtained films were semitransparent and flexible with good to moderate thermal stability and mechanical strength with high ionic conductivity. The EMImFSI‐containing gel electrolytes showed higher ionic conductivity than the corresponding EMImTFSI‐containing gel electrolytes. The ionic conductivity in the acrylate‐based gel electrolytes was slightly increased by addition of lithium salt, while that in the corresponding methacrylate‐based electrolytes was decreased significantly. The flame test showed the ionic liquid containing networked polymer gel electrolytes to have low if any flammability and was therefore confirmed to be highly safe. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fast Lithium Ion Conduction in Lithium Phosphidoaluminates

Solid electrolyte materials are crucial for the development of high‐energy‐density all‐solid‐state batteries (ASSB) using a nonflammable electrolyte. In order to retain a low lithium‐ion transfer resistance, fast lithium ion conducting solid electrolytes are required. We report on the novel superionic conductor Li₉AlP₄ which is easily synthesised from the elements via ball‐milling and subsequent annealing at moderate temperatures and which is characterized by single‐crystal and powder X‐ray diffraction. This representative of the novel compound class of lithium phosphidoaluminates has, as an undoped material, a remarkable fast ionic conductivity of 3 mS cm^?1 and a low activation energy of 29 kJ mol^?1 as determined by impedance spectroscopy. Temperature‐dependent ⁷Li NMR spectroscopy supports the fast lithium motion. In addition, Li₉AlP₄ combines a very high lithium content with a very low theoretical density of 1.703 g cm^?3. The distribution of the Li atoms over the diverse crystallographic positions between the [AlP₄]^9? tetrahedra is analyzed by means of DFT calculations.