Synthesis of cyclic olefin polymers with high glass transition temperature by ring‐opening metathesis copolymerization and subsequent hydrogenation

Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefin, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1′,2′)‐benzeno‐l,4‐methanoanthracene (HBMN), with high glass transition temperature (T_g), excellent thermal stability, high transparency, and improved mechanical performance, have been achieved by ring‐opening metathesis polymerization and subsequent hydrogenation. The “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh) (Cy = cyclohexyl) ( G1 ), displays very high activity for homo/copolymerization with complete conversion. Homopolymer of the HBMN after complete hydrogenation showed a highest T_g of 223.6 °C. Copolymerization of HBMN with tricyclo[4.3.0.12,5]deca‐3‐ene or 5‐n‐hexylnorbornene was also carried out. These two series of COPs were characterized by gel permeation chromatography, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. The T_g of the resulted COPs linearly increased with HBMN content, which is easily controlled by changing feed ratios. The tensile test indicates that these copolymers have good mechanical performance as all these copolymers show a higher strain at break compared with commercial products (TOPAS^®). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2654‐2661     

The synthesis of cyclic polymers by olefin metathesis: Achievements and challenges

Cyclic polymers have drawn considerable interest for their peculiar physical properties in comparison to linear polymers, despite their equivalent compositions. Synthetically, cyclic polymers can be accessed through either macrocyclic ring‐closure or by ring‐expansion polymerization, but the main challenge with either method is the production of highly pure cyclic polymer samples. This highlight describes advances in the area of cyclic polymer synthesis, with a particular focus on ring‐expansion metathesis polymerization. Methods for characterizing cyclic polymers and assessing their purity are also discussed in order to emphasize the need for additional robust and reliable methods for synthesizing and studying topologically complex macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 228–242     

Preparation of novel cyclic olefin copolymer with high glass transition temperature

A series of novel cyclic olefin copolymers (COCs), including ethylene/tricyclo[4.3.0.1^2,5]deca‐3‐ene (TDE), ethylene/tricyclo[4.4.0.1^2,5]undec‐3‐ene (TUE), and ethylene/tricyclo[6.4.0.1^9,12]tridec‐10‐ene (TTE) copolymers, have been synthesized via effective copolymerizations of ethylene with bulk cyclic olefin comonomers using bis(β‐enaminoketonato) titanium catalysts ( 1a [PhN?C(CH₃)CHC(CF₃)O]₂TiCl₂; 1b : [PhN?C(CF₃)CHC(Ph)O]₂TiCl₂). With modified methylaluminoxane as a cocatalyst, both catalysts exhibit high catalytic activities, producing high molecular weight copolymers with high comonomer incorporations and unimodal molecular weight distributions. The microstructures of obtained ethylene/COCs are established by combination of ¹H, ¹³C NMR, ¹³C DEPT, HSQC ¹H? ¹³C, and ¹H? ¹H COSY NMR spectra. DSC analyses indicate that the glass transition temperature (T_g) increases with the enhancement of comonomer volume (TDE < TUE < TTE). High T_g value up to 180 °C is easily attained in ethylene/TTE copolymer with the low content of 35.8 mol %. TGA analyses reveal that these copolymers all possess high thermal stability with degradation temperatures (T_d) higher than 370 °C in N₂ and air. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3144–3152     

Efficient synthesis of cyclic olefin copolymers with high glass transition temperatures by ethylene copolymerization with tetracyclododecene using (tert‐BuC5H4)TiCl2(N=CtBu2)—MAO catalyst

(^tBuC₅H₄)TiCl₂(N=C^tBu₂) ( 1 ) exhibited remarkable catalytic activities (12,000–43,700 kg‐polymer/mol‐Ti·h) and efficient comonomer incorporation in ethylene copolymerization with tetracyclododecene (TCD) in the presence of methylaluminoxane, and the catalytic activity by 1 increased even at 60 °C. The resultant polymers are high molecular weight amorphous poly(ethylene‐co‐TCD)s (M_n = 5.88–7.03 × 10⁵) with uniform compositions (with high T_g values, 108–203 °C); a linear relationship between T_g values and the TCD contents was observed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2662–2667     

Synthesis of thioether‐functional poly(olefin)s via ruthenium‐alkylidene initiated ring‐opening metathesis polymerization

Ring‐opening metathesis polymerization (ROMP) of thioether‐derived oxanorbornene imide ( M1 ) and its copolymerization with various cycloolefin comonomers such as cyclopentene ( M2 ), cyclopent‐3‐en‐1‐ol ( M3 ), cycloheptene ( M4 ), and cyclooctene ( M5 ) using Hoveyda–Grubbs second generation catalyst has been investigated. Polymerizations were performed at two different temperatures (0 and 25 °C) and the obtained functional poly(olefin)s were characterized by nuclear magnetic resonance ¹H and ¹³C (NMR), and infrared spectroscopy as well as size exclusion chromatography, differential scanning calorimetry, and thermogravimetric analysis analyses. Additionally, the dependence of the polymer composition on the reaction temperature and monomer feed was studied with time‐dependent ¹H NMR experiments. Copolymerization of M1 with a five‐membered cycloolefin monomer M2 showed relatively low ROMP reactivity irrespective of the reaction conditions in comparison to M3 , M4 , and M5 monomers. In general, the degree of monomer incorporation into poly(olefin)s were determined in the order of M5 > M3 > M4 > M2 , and that sheds light on the effect of cycloolefin ring strain energies in the ruthenium‐alkylidene initiated ROMP. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1741–1747     

Synthesis of a norbornene monomer having cyclic carbonate moiety based on CO2 fixation and its transition metal‐catalyzed polymerizations

A norbornene monomer bearing cyclic carbonate moiety ( NB‐CC ) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon dioxide under atmospheric pressure, which was efficiently catalyzed by lithium bromide. NB‐CC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene), of which side chain inherited the cyclic carbonate moiety from the monomer without any deterioration. The same ROMP system was applicable to the copolymerization of NB‐CC and 5‐butyl‐2‐norbornene ( BNB ), which afforded the corresponding copolymer with a composition ratio same as a feed ratio. In addition, by using a catalytic system consisted of palladium (II) acetate/tricyclohexylphosphine/triphenylcarbenium tetrakis(pentafluorophenyl)borate, the copolymerization of NB‐CC and BNC proceeded successfully in a vinyl addition polymerization mode to give the corresponding poly(norbornene) having CC moiety in the side chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3896–3902, 2010     

Synthesis and properties of amorphous blue‐light‐emitting polymers with high glass‐transition temperatures

A series of soluble poly(arylene ether)s containing the phenylphosphine oxide moiety were synthesized by the polymerization of substituted oligophenylene diols with bis(fluorophenyl)phenylphosphine oxide. These amorphous polyethers had well‐defined structures and showed blue photoluminescence combined with good thermal stability, especially when phenyl or ethoxy side groups were used. The glass‐transition temperatures increased when the size of the oligophenylene segment increased from three to five rings or when the length of the alkoxy substituents decreased. Polymers with glass‐transition temperatures up to 270 °C were obtained. The absorption and photoluminescent spectra shifted to longer wavelengths with an increase in the oligophenylene block. A redshift was also observed on photoluminescent spectra in the transition from solution to the solid state. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3168–3179, 2001     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and properties of a novel high temperature pyridine‐containing phthalonitrile polymer

A novel pyridine‐containing aromatic phthalonitrile monomer, 2,6‐bis[4‐(3,4‐dicyanophenoxy)benzoyl]pyridine (BCBP) was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide of 2,6‐bis (4‐hydroxybenzoyl)pyridine (BHBP). 4‐(Aminophenoxy) phthalonitrile (APPH) was selected to promote the curing reaction, and the curing behavior has been investigated by differential scanning calorimetric (DSC), suggesting a wide processing window about 64 °C. Different curing additive concentrations resulted in polymers with different crosslinking degrees and subsequently influenced the performance of resins. The resulting BCBP polymer exhibited high glass transition temperatures exceeding 400 °C, outstanding thermo‐oxidative stability with weight retention of 95% at 530 °C, indicating a significant improvement in thermal properties endowed by pyridine units. Additionally, it also showed a lower overall water absorption after submersion in boiling water for 50 hours. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3819–3825     

Surface characterization and properties of plasma‐modified cyclic olefin copolymer/layered silicate nanocomposites

In this study, cyclic olefin copolymer (COC)/layered silicate nanocomposites (CLSNs) were prepared by the intercalation of COC polymer into organically‐modified layered silicate through the solution mixing process. Both X‐ray diffraction data and transmission electron microscopy images of CLSNs indicate most of the swellable silicate layers were disorderedly intercalated into the COC matrix. The effect of layered silicate on the mechanical and barrier properties of the fabricated nanocomposites shows significant improvements in the storage modulus and water permeability when compared with that of neat COC matrix. Surfaces of COC and CLSN films were modified by a mixture of oxygen (O₂) and nitrogen (N₂) plasmas with various treated times, system pressures, and radio frequency (RF) powers. The surfaces of plasma‐modified COC and CLSN were investigated using scanning probe microscopy and contact‐angle measurements. The exposure of the COC and CLSN film to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new functional groups onto polymer surfaces to change the topology of COC film surfaces. The surface roughness was closely related to how high and how long the RF power was input into the system. The plasmas also led to changes in the surface properties of the CLSN surfaces from hydrophobic to hydrophilic; and the contact angle of water on the surface decreases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2745–2753, 2005     

Synthesis of highly thermostable norbornene‐isoprene‐1‐octene terpolymer with titanium catalyst

Terpolymerization of norbornene (NB), isoprene (IP), and 1‐octene was achieved by using fluorenylamido‐ligated titanium catalyst, which showed very high activity for the copolymerization of NB and various α‐olefins. The content of IP in the terpolymer was controlled by the feed ratio and reaction temperature up to 7 mol %. The incorporated IP was mainly inserted in 1,4‐addition. The polymer was dissolved into common solvents such as toluene and chloroform, which enabled the preparation of a transparent film by solution casting process. The degradation temperature of the terpolymer was comparable with other cyclic olefin copolymers and the glass transition temperature (T_g) was higher than that of NB‐1‐octene copolymer with almost the same NB content. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2136–2140     

Cleavable multiblock copolymer synthesized by ring‐opening metathesis copolymerization of cyclooctene and macrocyclic olefin and its hydrolysis to give carboxyl‐telechelic polymer

A novel cleavable multiblock copolymer was synthesized by ring‐opening metathesis polymerization (ROMP) of cyclooctene (COE) and a flexible 27‐membered macrocyclic olefin (MCO), which is acted as the spacer to collect the polymer structure block by block. MCO 2 was prepared via ring‐closing metathesis of the long chain alkyldiene, and then 2 was well‐ conducted ROMP with COE to provide the multiblock copolymer [Poly(COE)‐ 2 ]_m consisting of homo‐Poly(COE) blocks and ring‐opened 2 segments with different molecular weights (M_n = 30.0 – 249.6 × 10³) and polydispersity index (PDI) within 1.45–1.67 as variation of the feed ratio of COE to 2 . The multiblock copolymer chain containing weak ester linkage can be cleaved under alkali condition to afford the carboxyl‐telechelic Poly(COE) blocks with much lower molecular weights (M_n,h = 3.6–35.7 × 10³) and slight higher PDIs (1.65–1.88). The average block number on multiblock copolymer chain was obtained from the ratio of M_n to M_n,h and was reached up to the value of 7–16. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 380–388, 2010     

Thiophene π bridge effect on bulky side‐chained benzodithiophene‐based photovoltaic polymers

Recently, we have used terthiophene side chain to modify benzo[1,2‐b:4,5‐b′]dithiophene (BDT) to form novel building block for BDT polymers. In this paper, this building block is used to copolymerized with thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and thieno[3,4‐b]thiophene (TT). This building block and TPD‐ or TT‐based polymers (P1 and P3) show high open circuit voltage (V_OC) (ca. 0.9–0.95 V) and low energy loss (E_g–eV_OC) in solar cells devices compared with similar polymers without bulky side chain. We further introduce thiophene π bridge into these polymers backbone to form two other polymers (P2 and P4). We find this thiophene π bridge does contribute to this bulky side chained benzodithiophene polymer photovoltaic performances, especially for power conversion efficiencies (PCEs). The polymer solar cells (PSCs) performances are moderate in this article due to the serious aggregation in the PSCs active layer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1615–1622     

Synthesis of Hydroxy‐Functionalized Cyclic Olefin Copolymer and Its Block Copolymers with Semicrystalline Polyolefin Segments

Synthesis of hydroxy‐functionalized cyclic olefin copolymer (COC) is achieved with remarkably high activity (up to 5.96 × 10⁷ g‐polymer mol‐Ti⁻¹ h⁻¹) and controlled hydroxy group in a wide range (≈17.1 mol%) by using ansa‐dimethylsilylene (fluorenyl)(amido)titanium complex. The catalyst also promotes living/controlled copolymerization to afford novel diblock copolymers consisting of hydroxy‐functionalized COC and semicrystalline polyolefin sequence such as polyethylene and syndiotactic polypropylene, where the glass transition temperature of the norbornene/10‐undecen‐1‐ol segment and each block length are controlled by comonomer composition and copolymerization time, respectively.

     

Synthesis of cyclo‐olefin copolymer latexes and their carbon nanotube composite nanoparticles

An efficient and environmentally benign synthetic method for the production of the stabilized cyclo‐olefin copolymer latexes and their carbon nanotube composite nanoparticles has been developed using an emulsion ring opening metathesis copolymerization catalyzed by the 2nd generation Grubbs catalyst in aqueous solution. Homopolymerizations of norbornene (NB) and dicyclopentadiene (DCPD) in aqueous solution yield unstable polymer latexes in combination with a large amount of their flocculation fractions. Copolymerizations of NB or DCPD with a selected liquid cyclo‐olefin comonomer dramatically improve not only the colloidal stability of the copolymer latexes but also the thermal stability of the copolymer nanoparticles. The liquid cyclo‐olefin comonomer plays a double role as a liquefied agent for the solid NB and DCPD monomers before the emulsification treatment, and a reactive comonomer itself to control entirely the copolymerization system. The as‐prepared cyclo‐olefin copolymer latexes exhibit an exceptionally high compatibility with a well‐dispersed carbon nanotube (CNT) in aqueous solution due to strong π–π interactions between the graphitic surfaces of the CNT with the C‐C double bonds located on the cyclo‐olefin copolymer main chains. Accordingly, a binary blending of these two well‐dispersed colloidal systems in aqueous solution led to the fabrication, for the first time, of the highly electrical conductive cyclo‐olefin copolymer/CNT composite nanoparticles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4584–4591     

RAFT/MADIX copolymerization of vinyl acetate and 5,6‐benzo‐2‐methylene‐1,3‐dioxepane

The synthesis of well‐defined degradable poly(vinyl acetate) analogues is achieved by RAFT copolymerization of 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) and vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MEA) as controlling agent. Several monomer mixtures with low BMDO contents (<30 mol %) are employed to prepare different copolymers. In all the cases, the evolution of molar masses and the dispersity values (<1.26) confirm the controlled feature of the polymerization. The livingness of the obtained chains is demonstrated by successful chain extension experiments with VAc, although the presence of dead chains is also shown. The introduction of ester groups into the main chain of these P(VAc‐co‐BMDO) copolymers allows their degradation when treated with a mixture of KOH/MeOH in reflux during 2.5 h. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 104–111     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561