Experimental and theoretical study of charge‐transfer complex hybrid polyimide membranes

The nanostructure of sulfonated polyimide (SPI)/dihydroxynaphthalene (DHN) derivative charge‐transfer (CT) complex hybrid films, which are noble alternative polymer electrolyte membranes (PEMs), is determined by a combined visible spectroscopy/quantum mechanical approach. From the visible spectra of SPI/2,6‐dihydroxynaphthalene (2,6‐DHN) and 1,5‐dihydroxynaphthalene (1,5‐DHN) CT complex hybrid films, it is confirmed that these films have different maximum wavelength, although difference of the molecular structure is small. From the calculation based on the experimental result, SPI and DHNs form multiple interactions consisting of not only CT interaction, but also hydrogen bonding in multilayered structures. CT interaction between SPI and DHN defines the DHN position in the SPI matrix, with DHN sitting in the cavity formed between SPIs. The molecular structure of the CT films derived from the multiple and complex interactions can recognize small differences in the structural isomers and bring changes of the optical property. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 293–298     

Synthesis and characterization of sulfonated homo‐ and co‐polyimides based on 2,4 and 2,5‐diaminobenzenesulfonic acid for proton exchange membranes

A series of sulfonated homo‐ and random co‐polyimides (co‐SPI) based on 2,4‐diaminobenzenesulfonic acid (2,4‐DABS) and 2,5‐diaminobenzenesulfonic acid (2,5‐DABS) has been synthesized via conventional two‐step polyimidization method. 2,4‐DABS and 2,5‐DABS were used as sulfonated diamine compounds, 4,4′‐oxydianiline (ODA) and 4,4′‐diaminodiphenyl sulfone (DDS) were used as non‐sulfonated diamine compounds. Mixtures of sulfonated and non‐sulfonated diamine compounds were reacted with benzophenonetetracarboxylic dianhydride (BTDA) to obtain co‐SPI membranes. Molar ratios of sulfonated to non‐sulfonated diamine were systematically varied to produce copolymers of controlled compositions. The co‐SPIs were evaluated for thermal oxidative stability, ion exchange capacity (IEC), water uptake, proton conductivity, solubility, and hydrolytic stability. Proton conductivity and hydrolytic stability of the co‐SPIs were compared with the fully aromatic polyimide, homo‐SPIs (BTDA/2,4‐DABS and BTDA/2,5‐DABS). Regarding thermogravimetric analysis (TGA) analysis, it is concluded that desulfonation temperature in the range of 200–350°C suggests high stability of sulfonic acid groups. co‐SPIs with 40 mol% of 2,4‐DABS showed similar or higher proton conductivity than Nafion® 117 in water. Proton conductivity values of the co‐SPIs were mainly a function of IEC and water uptake. Consequently, the optimum concentration of 2,4‐DABS was found to be in the range of 30–40 mol% from the viewpoint of proton conductivity, IEC, and hydrolytic stability. Copyright © 2008 John Wiley & Sons, Ltd.     

Nanostructure and properties of sulfonated polyarylenethioethersulfone copolymers as proton exchange fuel cell membranes

A systematic investigation of properties and nanostructure of sulfonated polyarylenethioethersulfone (SPTES) copolymer proton exchange membranes for fuel cell applications has been presented. SPTES copolymers are high temperature resistant (250 °C), and form tough films with excellent proton conductivity up to 170 ± 5 mS/cm (SPTES 70 @ 85 °C, 85%RH). Small angle X‐ray scattering of hydrated SPTES 70 revealed the presence of local water domains (diameter ～5 nm) within the copolymer. The high proton conductivity of the membranes is attributed to the formation of these ionic aggregates containing water molecules, which facilitate proton transfer. AFM studies of SPTES 70 as a function of humidity (25–65%RH) showed an increase in hydrophilic domains with increasing humidity at 22 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2813–2822, 2007     

Structure–property correlations of sulfonated polyimides. I. Effect of bridging groups on membrane properties

A series of six‐membered sulfonated polyimides were synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid as the sulfonated diamine, and various nonsulfonated diamine monomers having different bridging groups. These bulky bridging groups have the capacity to increase hydrolytic stability and proton conductivity. Polyimides with bulky bridging groups showed increased solubility but exhibited lower thermal stability. The ion exchange capacity and water uptake reduced with increase in the bulkiness of the bridging group. This was attributed to the increase in the molecular weight of the repeating unit and hence effectively reduced the sulfonic acid content. In low temperatures, the conductivity was lower than Nafion®115 and, with increase in temperature, the conductivity rapidly increased and exhibited better conductivity than Nafion®115. Polyimides with bulky bridging groups 4‐amino phenyl sulfone, and 2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane showed higher conductivity than other polyimides and Nafion®115 despite low ion exchange capacity. The hydrolytic stability of the polyimides with bulky bridging groups was higher than the polyimides with less bulky atoms because of the imparted flexibility. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3612–3620, 2004     

Structure–property correlations of sulfonated polyimides. II. Effect of substituent groups on membrane properties

A series of sulfonated polyimides with increasing alkyl substituents in the o‐position to diamine were synthesized from 4,4′‐methylene dianiline, 4,4′‐diamine‐3,3′‐dimethyl‐diphenylmethane, and 4,4′‐diamine‐3,5,3′,5′‐tetraethyl‐diphenylmethane using 1,4,5,8‐naphthalenetetracarboxylic dianhydride and perylenetetracarboxylic dianhydride by chemical imidization method. 4,4′‐Diaminobiphenyl 2,2′‐disulfonic acid was used as sulfonated diamine. The variation in the membrane properties with increase in substitution was analyzed. Solubility increased with substitution whereas the thermal stability decreased with increase in substitution. Ion exchange capacity and water uptake reduced with increase in substitution because of the low sulfonic acid content at a particular weight due to the increased molecular weight of the repeating unit. The conductivity of the substituted diamines was higher than the unsubstituted diamines at higher temperature regardless of low ion exchange capacity and water uptake. The increase in conductivity with increase in temperature was more rapid in polyimides than in Nafion®115. Hydrolytic stability of the polyimides with substitution is more than the unsubstituted diamines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3621–3630, 2004     

Synthesis and properties of sulfonated polyimides derived from bis(sulfophenoxy) benzidines

A series of aromatic sulfonated polyimides (SPIs) bearing sulfophenoxy side groups have been successfully synthesized and evaluated as polymer electrolyte membranes for fuel cell applications. The SPIs had high viscosity and gave tough and flexible membranes. The SPI membranes showed anisotropic membrane swelling in water with much larger dimensional change in thickness direction than in plane one. They showed the better proton‐conducting performance even in the lower relative humidity (RH) range than the other SPI membranes, for example, a high proton conductivity of 0.05 S/cm at 50 % RH and 120 °C. They maintained high mechanical strength and conductivity after aging in water at 130 °C for 500 h, showing much better water stability compared with the main‐chain‐type SPI and side‐chain‐type SPI membranes reported so far. In polymer electrolyte fuel cells (PEFCs) operated at 90 °C and 84–30%RH, they showed fairly high cell performances and have high potential for PEFC applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1463–1477, 2009     

Ring‐opening polymerization of ϵ‐caprolactone by iodine charge‐transfer complex

The ring‐opening polymerization of ?‐caprolactone (?‐CL) catalyzed by iodine (I₂) was studied. The formation of a charge‐transfer complex (CTC) among triiodide, I, and ?‐CL was confirmed with ultraviolet–visible spectroscopy. The monomer ?‐CL was polymerized in bulk using I₂ as a catalyst to form the polyester having apparent weight‐average molecular weights of 35,900 and 45,500 at polymerization temperatures of 25 and 70 °C, respectively. The reactivity of both, ?‐CL monomer and ?‐CL:I₂ CTC, was interpreted by means of the potential energy surfaces determined by semiempirical computations (MNDO‐d). The results suggest that the formation of the ?‐CL:I₂ CTC leads to the ring opening of the ?‐CL structure with the lactone protonation and the formation of a highly polarized polymerization precursor (?‐CL)⁺. The band gaps approximated from an extrapolation of the oligomeric polycaprolactone (PCL) structures were computed. With semiempirical quantum chemical calculations, geometries and charge distributions of the protonated polymerization precursor (?‐CL)⁺ were obtained. The calculated band gap (highest occupied molecular orbit/lowest unoccupied molecular orbit differences) agrees with the experiment. The analysis of the oligomeric PCL isosurfaces indicate the existence of a weakly lone pair character of the C?O and C? O bonds suggesting a ?‐CL ring‐opening specificity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 714–722, 2002     

Synthesis of novel proton‐conducting highly sulfonated polybenzimidazoles for PEMFC and the effect of the type of bisphenyl bridge on polymer and membrane properties

Six series of novel highly sulfonated polybenzimidazoles (sPBIs) with high molecular weight were prepared by direct polycondensation between 3,3′‐diaminobenzidine and original multisulfonated dinuclear dicarboxylic acids containing bridging ether, sulfone, and hexafluoroisopropylidene moieties. All reactions were carried out in polyphosphoric acid, which acts as both solvent and catalyst. The degree of sulfonation was modulated in the final products by varying the proportion of sulfonated to nonsulfonated dicarboxylic acids used in the synthesis. The high purity of the disulfonated and tetrasulfonated monomers allows wholly sulfonated homopolymers to be obtained. Confirmation of the chemical structure and the degree of sulfonation were derived from ¹H nuclear magnetic resonance spectroscopy. Inherent viscosity was estimated as between 0.70 and 5.33 dL g^?1 for sPBIs with ion exchange capacity in the range 0.87–4.68 mequiv g^?1. Dynamic thermogravimetric analysis in air showed no weight loss below 350 °C (heating rate 5 °C min^?1). The nature of the bisphenyl bridge has clear influence on the water uptake and proton conduction properties of the resulting sPBI membranes, with hexafluoroisopropylidene links providing materials of highest conductivity as well as favoring film‐forming characteristics. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of fluorine‐containing polybenzimidazole for proton conducting membranes in fuel cells

Two new kinds of fluorine‐containing polybenzimidazoles (PBI), poly(2,2′‐(tetrafluoro‐p‐phenylene)‐5,5′‐bibenzimidazole) and poly(2,2′‐tetradecafluoroheptylene‐5,5′‐bibenzimidazole), were synthesized by condensation polymerization of 3,3′‐diaminobenzidine and perfluoroterephthalic acid (or perfluoroazelaic acid), with polyphosphoric acid as solvent. Thermogravimetric analysis results show that the fluorine‐containing polymers synthesized exhibit promising thermal stability. The film‐forming properties of the fluorine‐containing polymers are improved over nonfluorinated PBI. The introduction of fluorine into the backbone of the polymers has significant positive affection on their chemical oxidation stability demonstrated by Fenton test. Compared with poly(2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole)/phosphoric acid (PA) composite membrane, the resulting fluorinated membranes with a same PA doping level exhibit better flexibility and higher proton conductivity. The maximum proton conductivity gained is 3.05 × 10^?2 S/cm at 150 °C with a PA doping level of 7. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2115–2122, 2010     

A charge‐transfer salt composed of methyl viologen and hexacyanidoferrate(II)

The methyl viologen dication, used under the name Paraquat as an agricultural reagent, is a well‐known electron‐acceptor species that can participate in charge‐transfer (CT) interactions. The determination of the crystal structure of this species is important for accessing the CT interaction and CT‐based properties. The title hydrated salt, bis(1,1′‐dimethyl‐4,4′‐bipyridine‐1,1′‐diium) hexacyanidoferrate(II) octahydrate, (C₁₂H₁₄N₂)₂[Fe(CN)₆]·8H₂O or (MV)₂[Fe(CN)₆]·8H₂O [MV²⁺ is the 1,1′‐dimethyl‐4,4′‐bipyridine‐1,1′‐diium (methyl viologen) dication], crystallizes in the space group P 2₁/c with one MV²⁺ cation, half of an [Fe(CN)₆]⁴⁻ anion and four water molecules in the asymmetric unit. The Fe^II atom of the [Fe(CN)₆]⁴⁻ anion lies on an inversion centre and has an octahedral coordination sphere defined by six cyanide ligands. The MV²⁺ cation is located on a general position and adopts a noncoplanar structure, with a dihedral angle of 40.32 (7)° between the planes of the pyridine rings. In the crystal, layers of electron‐donor [Fe(CN)₆]⁴⁻ anions and layers of electron‐acceptor MV²⁺ cations are formed and are stacked in an alternating manner parallel to the direction of the −2a + c axis, resulting in an alternate layered structure.     

Novel multiblock‐co‐ionomers as potential polymer electrolyte membrane materials

In this contribution a series of novel multiblock‐co‐ionomers consisting of hydrophobic (partially fluorinated) and hydrophilic (sulfonated) domains has been prepared and characterised in terms of their applicability as fuel cell membranes. The synthesis of these multiblock‐co‐ionomers is a four‐step procedure including (1) the sulfonation of the monomer 4,4′‐difluorodiphenylsulfone, (2) the preparation of hydrophilic telechelic macromonomers by molecular‐weight controlled step‐growth polycondensation of the sulfonated monomer with various bis(thio)phenols, (3) the preparation of a hydrophobic telechelic macromonomer and (4) the coupling of both telechelic macromonomers to yield microphase‐separated block‐co‐ionomers. This study focuses on the investigation of the influence of various linkage groups and atoms within the hydrophilic domains of the multiblock‐co‐ionomers. Both the telechelic macromonomers and the multiblock‐co‐ionomers were structurally investigated by ¹H‐ and ¹⁹F‐NMR spectroscopy and gel permeation chromatography (GPC). All multiblock‐co‐ionomers of this series could be cast into membranes and their membrane properties (ion‐exchange capacity, specific resistance, swelling ratio, water uptake, thermal and oxidative stability) were measured and discussed in dependence of the various linkage groups within the hydrophilic domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5237–5255, 2007     

Supramolecular assembly of H‐bonded side‐chain polymers containing conjugated pyridyl H‐acceptor pendants and various low‐band‐gap H‐donor dyes bearing cyanoacrylic acid groups for organic solar cell applications

Novel supramolecular side‐chain polymers were constructed by complexation of proton acceptor (H‐acceptor) polymers, i.e., side‐chain conjugated polymers P1–P2 containing pyridyl pendants, with low‐band‐gap proton donor (H‐donor) dyes S1–S4 (bearing terminal cyanoacrylic acids) in a proper molar ratio. Besides unique mesomorphic properties confirmed by DSC and XRD results, the H‐bonds of supramolecular side‐chain structures formed by pyridyl H‐acceptors and cyanoacrylic acid H‐donors were also confirmed by FTIR measurements. H‐donor dyes S1–S4 in solid films exhibited broad absorption peaks located in the range of 471–490 nm with optical band‐gaps of 1.99–2.14 eV. Furthermore, H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 exhibited broad absorption peaks in the range of 440–462 nm with optical band‐gaps of 2.11–2.25 eV. Under 100 mW/cm² of AM 1.5 white‐light illumination, the bulk heterojunction polymer solar cell (PSC) devices containing an active layer of H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 (as electron donors) mixed with [6,6]‐phenyl C₆₁ butyric acid methyl ester (i.e., PCBM, as an electron acceptor) in the weight ratio of 1:1 were investigated. The PSC device containing H‐bonded polymer complex P1/S3 mixed with PCBM (1:1 w/w) gave the best preliminary result with an overall power conversion efficiency (PCE) of 0.50%, a short‐circuit current of 3.17 mA/cm², an open‐circuit voltage of 0.47 V, and a fill factor of 34%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5998–6013, 2009     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of 15-crown-5 on the charge transfer resistance at the polymer electrolyte/modified Li-electrode interface

The effect of 15-crown-5, which is applied immediately to pure and modified surface of a lithium electrode, on the charge transfer resistance at the electrode/polymer electrolyte interface is studied. The polymer electrolyte consists of a 1: 1 mixture of oligourethan dimethacrylate and polypropylene glycol monomethacrylate (20 wt %), an initiator (azobisisobutyronitrile) (2 wt %), and a 1 M LiClO₄ solution in gamma-butyrolactone (78 wt %). The conductivity of this gel electrolyte is 3 × 10^?3 S cm^?1. The temperature dependence of the impedance of the Li/gel electrolyte/Li electrochemical cells is measured for electrodes of four types. The activation energies for the charge transfer at the Li/electrolyte interface are calculated. It is found that, after treating the test lithium electrodes with 15-crown-5, the charge transfer resistance decreases, and in the case of the modified lithium surface, the activation energy for the process decreases by 1.8 times.     

Synthesis and characterization of high molecular weight hexafluoroisopropylidene‐containing polybenzimidazole for high‐temperature polymer electrolyte membrane fuel cells

A high molecular weight, thermally and chemical stable hexafluoroisopropylidene containing polybenzimidazole (6F‐PBI) was synthesized from 3,3′‐diaminobenzidine (TAB) and 2,2‐bis(4‐carboxyphenyl) hexafluoropropane (6F‐diacid) using polyphosphoric acid (PPA) as both the polycondensation agent and the polymerization solvent. Investigation of polymerization conditions to achieve high molecular weight polymers was explored via stepwise temperature control, monomer concentration in PPA, and final polymerization temperature. The polymer characterization included inherent viscosity (I.V.) measurement and GPC as a determination of polymer molecular weight, thermal and chemical stability assessment via thermo gravimetric analysis and Fenton test, respectively. The resulting high molecular weight polymer showed excellent thermal and chemical stability. Phosphoric acid doped 6F‐PBI membranes were prepared using the PPA process. The physiochemical properties of phosphoric acid doped membranes were characterized by measuring the phosphoric acid doping level, mechanical properties, and proton conductivity. These membranes showed higher phosphoric acid doping levels and higher proton conductivities than the membranes prepared by the conventional membrane fabrication processes. These membranes had sufficient mechanical properties to be easily fabricated into membrane electrode assemblies (MEA) and the prepared MEAs were tested in single cell fuel cells under various conditions, with a focus on the high temperature performance and fuel impurity tolerance. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4064–4073, 2009     

Theoretical study of the inner‐sphere energy barrier of the transition‐metal complex M(H2O) in electron‐transfer process

Two theoretical models, a reorganization model and an activation model, are presented for accurately determining the energy barrier of the type M(H₂O) of the transition‐metal complexes in the electron‐transfer process. Ab initio calculations are carried out at UMP2/6‐311G level for several redox pairs M(H₂O) (M=V, Cr, Mn, Fe, and Co) to calculate their inner‐sphere reorganization energies and activation energies according to the models presented in this article. The values of theoretical inner‐sphere reorganization energies and activational energies are comparable with the experimental results obtained from the vibration spectroscopic data. The theoretical reorganization energy of the every redox pair is four times as much as its activation energy, which agrees with Marcus' electron‐transfer theory. The fact proved that the theoretical models presented in this article are scientific and available for studying the electron‐transfer process of the transition‐metal complex. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 75: 119–126, 1999     

Hydride transfer reactions via ion–neutral complex: fragmentation of protonated N‐benzylpiperidines and protonated N‐benzylpiperazines in mass spectrometry

An ion‐neutral complex (INC)‐mediated hydride transfer reaction was observed in the fragmentation of protonated N‐benzylpiperidines and protonated N‐benzylpiperazines in electrospray ionization mass spectrometry. Upon protonation at the nitrogen atom, these compounds initially dissociated to an INC consisting of [RC₆H₄CH₂]⁺ (R = substituent) and piperidine or piperazine. Although this INC was unstable, it did exist and was supported by both experiments and density functional theory (DFT) calculations. In the subsequent fragmentation, hydride transfer from the neutral partner to the cation species competed with the direct separation. The distribution of the two corresponding product ions was found to depend on the stabilization energy of this INC, and it was also approved by the study of substituent effects. For monosubstituted N‐benzylpiperidines, strong electron‐donating substituents favored the formation of [RC₆H₄CH₂]⁺, whereas strong electron‐withdrawing substituents favored the competing hydride transfer reaction leading to a loss of toluene. The logarithmic values of the abundance ratios of the two ions were well correlated with the nature of the substituents, or rather, the stabilization energy of this INC. Copyright © 2010 John Wiley & Sons, Ltd.     

Nafion-lnduced Metal-Metal Interactions in a Platinum（Ⅱ） Terpyridyl Acetylide Complex： a Luminescent Sensor for Detection of Volatile Organic Compounds

The platinum(Ⅱ) terpyridyl acetylide complex [Pt(terpy)(C≡CR)]ClO4 (terpy=2,2‘ : 6‘2“-terpyridine, R=CH2CH2CH3) (1) was incorporated into Nation membranes. At high loading the dry membranes exhibit intense photoluminescence with λmax at 707 nm from the ^3MMLCT state, which was not observed in fluid solution. Upon exposure to the vapor of polar volatile organic compounds (VOC), this photoluminescence was significantly red-shifed. This process was fully reversible when the VOC-incorporated membrane was dried in air. The dramatic and reversible changes in the emission spectra made the Nation-supported complex as an interesting sensor candidate for polar VOC.     

Ortho‐hydroxyl effect and proton transfer via ion–neutral complex: the fragmentation study of protonated imine resveratrol analogues in mass spectrometry

The fragmentation pathways of protonated imine resveratrol analogues in the gas‐phase were investigated by electrospray ionization–tandem mass spectrometry. Benzyl cations were formed in the imine resveratrol analogues that had an ortho‐hydroxyl group on the benzene ring A. The specific elimination of the quinomethane neutral, CH₂ = C₆H₄ = O, from the two isomeric ions [M1 + H]⁺ and [M3 + H]⁺ via the corresponding ion–neutral complexes was observed. The fragmentation pathway for the related meta‐isomer, ion [M2 + H]⁺ and the other congeners was not observed. Accurate mass measurements and additional experiments carried out with a chlorinated analogue and the trideuterated isotopolog of M1 supported the overall interpretation of the fragmentation phenomena observed. It is very helpful for understanding the intriguing roles of ortho‐hydroxyl effect and ion–neutral complexes in fragmentation reactions and enriching the knowledge of the gas‐phase chemistry of the benzyl cation. Copyright © 2016 John Wiley & Sons, Ltd.