Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mild and Low‐Pressure fac‐Ir(ppy)3‐Mediated Radical Aminocarbonylation of Unactivated Alkyl Iodides through Visible‐Light Photoredox Catalysis

A novel, mild and facile preparation of alkyl amides from unactivated alkyl iodides employing a fac‐Ir(ppy)₃‐catalyzed radical aminocarbonylation protocol has been developed. Using a two‐chambered system, alkyl iodides, fac‐Ir(ppy)₃, amines, reductants, and CO gas (released ex situ from Mo(CO)₆), were combined and subjected to an initial radical reductive dehalogenation generating alkyl radicals, and a subsequent aminocarbonylation with amines affording a wide range of alkyl amides in moderate to excellent yields.     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

Synthesis of well‐defined cyclodextrin‐core star polymers

The synthesis of 21‐arm methyl methacrylate (MMA) and styrene star polymers is reported. The copper (I)‐mediated living radical polymerization of MMA was carried out with a cyclodextrin‐core‐based initiator with 21 independent discrete initiation sites: heptakis[2,3,6‐tri‐O‐(2‐bromo‐2‐methylpropionyl]‐β‐cyclodextrin. Living polymerization occurred, providing well‐defined 21‐arm star polymers with predicted molecular weights calculated from the initiator concentration and the consumed monomer as well as low polydispersities [e.g., poly(methyl methacrylate) (PMMA), number‐average molecular weight (M_n) = 55,700, polydispersity index (PDI) = 1.07; M_n = 118,000, PDI = 1.06; polystyrene, M_n = 37,100, PDI = 1.15]. Functional methacrylate monomers containing poly(ethylene glycol), a glucose residue, and a tert‐amine group in the side chain were also polymerized in a similar fashion, leading to hydrophilic star polymers, again with good control over the molecular weight and polydispersity (M_n = 15,000, PDI = 1.03; M_n = 36,500, PDI = 1.14; and M_n = 139,000, PDI = 1.09, respectively). When styrene was used as the monomer, it was difficult to obtain well‐defined polystyrene stars at high molecular weights. This was due to the increased occurrence of side reactions such as star–star coupling and thermal (spontaneous) polymerization; however, low‐polydispersity polymers were achieved at relatively low conversions. Furthermore, a star block copolymer consisting of PMMA and poly(butyl methacrylate) was successfully synthesized with a star PMMA as a macroinitiator (M_n = 104,000, PDI = 1.05). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2206–2214, 2001     

Regiospecific Intermolecular Aminohydroxylation of Olefins by Photoredox Catalysis

A simple and regiospecific aminohydroxylation of olefins by photoredox catalysis has been developed. N‐protected 1‐aminopyridinium salts are the key compounds and serve as amidyl radical precursors by the action of Ir photocatalysts, fac‐[Ir(ppy)₃] and [Ir(ppy)₂(dtbbpy)](PF₆) (ppy=2‐pyridylphenyl, dtbbpy=4,4′‐di‐tert‐butyl‐2,2′‐bipyridine). The present photocatalytic system allows for synthesis of vicinal aminoalcohol derivatives from olefins with various functional groups under mild reaction conditions with easy handling.     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Oxydifluoromethylation of Alkenes by Photoredox Catalysis: Simple Synthesis of CF2H‐Containing Alcohols

We have developed a novel and simple protocol for the direct incorporation of a difluoromethyl (CF₂H) group into alkenes by visible‐light‐driven photoredox catalysis. The use of fac‐[Ir(ppy)₃] (ppy=2‐pyridylphenyl) photocatalyst and shelf‐stable Hu's reagent, N‐tosyl‐S‐difluoromethyl‐S‐phenylsulfoximine, as a CF₂H source is the key to success. The well‐designed photoredox system achieves synthesis of not only β‐CF₂H‐substituted alcohols but also ethers and an ester from alkenes through solvolytic processes. The present method allows a single‐step and regioselective formation of C(sp³)–CF₂H and C(sp³)?O bonds from C=C moiety in alkenes, such as hydroxydifluoromethylation, regardless of terminal or internal alkenes. Moreover, this methodology tolerates a variety of functional groups.     

Stereocontrol in the free‐radical polymerization of methacrylates with fluoroalcohols

The free‐radical polymerization of methyl methacrylate (MMA), ethyl methacrylate (EMA), isopropyl methacrylate (IPMA), and tert‐butyl methacrylate (t‐BuMA) was carried out under various conditions to achieve stereoregulation. In the MMA polymerization, syndiotactic specificity was enhanced by the use of fluoroalcohols, including (CF₃)₃COH as a solvent or an additive. The polymerization of MMA in (CF₃)₃COH at −98 °C achieved the highest syndiotacticity (rr = 93%) for the radical polymerization of methacrylates. Similar effects of fluoroalcohols enhancing syndiotactic specificity were also observed in the polymerization of EMA, whereas the effect was negligible in the IPMA polymerization. In contrast to the polymerizations of MMA and EMA, syndiotactic specificity was decreased by the use of (CF₃)₃COH in the t‐BuMA polymerization. The stereoeffects of fluoroalcohols seemed to be due to the hydrogen‐bonding interaction of the alcohols with monomers and growing species. The interaction was confirmed by NMR measurements. In addition, in the bulk polymerization of MMA at −78 °C, syndiotactic specificity and polymer yield increased even in the presence of a small amount {[(CF₃)₃COH]/[MMA]_o < 1} of (CF₃)₃COH. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4693–4703, 2000     

Catalytic effect of dimethyl sulfoxide in the Cu(0)/tris(2‐dimethylaminoethyl)amine‐catalyzed living radical polymerization of methyl methacrylate at 0–90 °C initiated with CH3CHClI as a model compound for α,ω‐di(iodo)poly(vinyl chloride) chain ends

A variety of conditions, including catalysts [CuCl, CuI, Cu₂O, and Cu(0)], ligands [2,2′‐bipyridine (bpy), tris(2‐dimethylaminoethyl)amine (Me₆‐TREN), polyethyleneimine, and hexamethyl triethylenetetramine], initiators [CH₃CHClI, CH₂I₂, CHI₃, and F(CF₂)₈I], solvents [diphenyl ether, toluene, tetrahydrofuran, dimethyl sulfoxide (DMSO), dimethylformamide, ethylene carbonate, dimethylacetamide, and cyclohexanone], and temperatures [90, 25, and 0 °C] were studied to assess previous methods for poly(methyl methacrylate)‐b‐poly(vinyl chloride)‐b‐poly(methyl methacrylate) (PMMA‐b‐PVC‐b‐PMMA) synthesis by the living radical block copolymerization of methyl methacrylate (MMA) initiated with α,ω‐di(iodo)poly(vinyl chloride). CH₃CHClI was used as a model for α,ω‐di(iodo)poly(vinyl chloride) employed as a macroinitiator in the living radical block copolymerization of MMA. Two groups of methods evolved. The first involved CuCl/bpy or Me₆‐TREN at 90 °C, whereas the second involved Cu(0)/Me₆‐TREN in DMSO at 25 or 0 °C. Related ligands were used in both methods. The highest initiator efficiency and rate of polymerization were obtained with Cu(0)/Me₆‐TREN in DMSO at 25 °C. This demonstrated that the ultrafast block copolymerization reported previously is the most efficient with respect to the rate of polymerization and precision of the PMMA‐b‐PVC‐b‐PMMA architecture. Moreover, Cu(0)/Me₆‐TREN‐catalyzed polymerization exhibits an external first order of reaction in DMSO, and so this solvent has a catalytic effect in this living radical polymerization (LRP). This polymerization can be performed between 90 and 0 °C and provides access to controlled poly(methyl methacrylate) tacticity by LRP and block copolymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1935–1947, 2005     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Synthesis of poly(methyl methacrylate)‐b‐polystyrene containing a crown ether unit at the junction point via combination of atom transfer radical polymerization and nitroxide mediated radical polymerization routes

Poly(methyl methacrylate)‐b‐polystyrene (PMMA‐b‐PS) containing a benzo‐15‐crown‐5 unit at the junction point was prepared by combining atom transfer radical polymerization and nitroxide‐mediated radical polymerization. For this purpose, 6,7,9,10,12,13,15,16‐octahydro‐5,8,11,14,17‐pentaoxa‐benzocyclopentadecene‐2‐carboxylic acid 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxycarbonyl]‐propyl ester ( 3 ) was synthesized and used as an initiator in atom transfer radical polymerization of methyl methacrylate in the presence of CuCl and pentamethyldiethylenetriamine at 60°C. A linear behavior was observed in both plots of ln([M]₀/[M]) versus time and M_n,_GPC versus conversion indicating that the polymerization proceeded in a controlled/living manner. Thus obtained PMMA precursor was used as a macroinitiator in nitroxide‐mediated radical polymerization of styrene (St) at 125°C to give well‐defined PMMA‐b‐PS with crown ether per chain. Kinetic data were also obtained for copolymerization. Moreover, potassium picrate (K⁺ picrate) complexation of 3 and PMMA‐b‐PS copolymer was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3242–3249, 2006     

Understanding Electrogenerated Chemiluminescence Efficiency in Blue‐Shifted Iridium(III)‐Complexes: An Experimental and Theoretical Study

Compared to tris(2‐phenylpyridine)iridium(III) ([Ir(ppy)₃]), iridium(III) complexes containing difluorophenylpyridine (df‐ppy) and/or an ancillary triazolylpyridine ligand [3‐phenyl‐1,2,4‐triazol‐5‐ylpyridinato (ptp) or 1‐benzyl‐1,2,3‐triazol‐4‐ylpyridine (ptb)] exhibit considerable hypsochromic shifts (ca. 25–60 nm), due to the significant stabilising effect of these ligands on the HOMO energy, whilst having relatively little effect on the LUMO. Despite their lower photoluminescence quantum yields compared with [Ir(ppy)₃] and [Ir(df‐ppy)₃], the iridium(III) complexes containing triazolylpyridine ligands gave greater electrogenerated chemiluminescence (ECL) intensities (using tri‐n‐propylamine (TPA) as a co‐reactant), which can in part be ascribed to the more energetically favourable reactions of the oxidised complex (M⁺) with both TPA and its neutral radical oxidation product. The calculated iridium(III) complex LUMO energies were shown to be a good predictor of the corresponding M⁺ LUMO energies, and both HOMO and LUMO levels are related to ECL efficiency. The theoretical and experimental data together show that the best strategy for the design of efficient new blue‐shifted electrochemiluminophores is to aim to stabilise the HOMO, while only moderately stabilising the LUMO, thereby increasing the energy gap but ensuring favourable thermodynamics and kinetics for the ECL reaction. Of the iridium(III) complexes examined, [Ir(df‐ppy)₂(ptb)]⁺ was most attractive as a blue‐emitter for ECL detection, featuring a large hypsochromic shift (λ_max=454 and 484 nm), superior co‐reactant ECL intensity than the archetypal homoleptic green and blue emitters: [Ir(ppy)₃] and [Ir(df‐ppy)₃] (by over 16‐fold and threefold, respectively), and greater solubility in polar solvents.     

Photoredox‐Catalyzed Alkenylation of Benzylsulfonium Salts

Visible light‐mediated radical alkenylation of benzylsulfonium salts was achieved by means of fac‐Ir(ppy)₃ as a photocatalyst, giving allylbenzenes as products. A variety of functional groups, such as halogen, ester, and cyano, were well tolerated in this transformation. Starting benzylsulfonium salts could be readily prepared from benzyl alcohols by an acid‐mediated substitution, increasing the synthetic utility of this transformation.     

Rare‐earth‐metal‐initiated polymerizations of (meth)acrylates and block copolymerizations of olefins with polar monomers

The organo‐rare‐earth‐metal‐initiated living polymerization of methyl methacrylate (MMA) was first discovered in 1992 with (C₅Me₅)₂LnR (where R is H or Me and Ln is Sm, Yb, Y, or La) as an initiator. These polymerizations provided highly syndiotactic (>96%) poly(methyl methacrylate) (PMMA) with a high number‐average molecular weight (M_n > 1000 × 10³) and a very narrow molecular weight distribution [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) < 1.04] quantitatively in a short period. Bridged rare‐earth‐metallocene derivatives were used to perform the block copolymerization of ethylene or 1‐hexene with MMA, methyl acrylate, cyclic carbonate, or ?‐caprolactone in a voluntary ratio. Highly isotactic (97%), monodisperse, high molecular weight (M_n > 500 × 10³, M_w/M_n < 1.1) PMMA was first obtained in 1998 with [(Me₃Si)₃C]₂Yb. Stereocomplexes prepared by the mixing of the resulting syndiotactic and isotactic PMMA revealed improved physical properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 1955–1959, 2001     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

Visible‐Light‐Promoted Iminyl‐Radical Formation from Acyl Oximes: A Unified Approach to Pyridines,Quinolines, and Phenanthridines

A unified strategy involving visible‐light‐induced iminyl‐radical formation has been established for the construction of pyridines, quinolines, and phenanthridines from acyl oximes. With fac‐[Ir(ppy)₃] as a photoredox catalyst, the acyl oximes were converted by 1 e^? reduction into iminyl radical intermediates, which then underwent intramolecular homolytic aromatic substitution (HAS) to give the N‐containing arenes. These reactions proceeded with a broad range of substrates at room temperature in high yield. This strategy of visible‐light‐induced iminyl‐radical formation was successfully applied to a five‐step concise synthesis of benzo[c]phenanthridine alkaloids.     

Visible‐Light‐Driven Hydrogen Production and Polymerization using Triarylboron‐Functionalized Iridium(III) Complexes

The development of novel iridium(III) complexes has continued as an important area of research owing to their highly tunable photophysical properties and versatile applications. In this report, three heteroleptic dimesitylboron‐containing iridium(III) complexes, [Ir(p‐B‐ppy)₂(N^N)]⁺ {p‐B‐ppy=2‐(4‐dimesitylborylphenyl)pyridine; N^N=dipyrido[3,2‐a:2′,3′‐c]phenazine (dppz) ( 1 ), dipyrido[3,2‐d:2′,3′‐f]quinoxaline (dpq) ( 2 ), and 1,10‐phenanthroline (phen) ( 3 )}, were prepared and fully characterized electrochemically, photophysically, and computationally. Altering the conjugated length of the N^N ligands allowed us to tailor the photophysical properties of these complexes, especially their luminescence wavelength, which could be adjusted from λ=583 to 631 nm in CH₂Cl₂. All three complexes were evaluated as visible‐light‐absorbing sensitizers for the photogeneration of hydrogen from water and as photocatalysts for the photopolymerization of methyl methacrylate. The results showed that all of them were active in both photochemical reactions. High activity for the photosensitizer (over 1158 turnover numbers with 1 ) was observed, and the system generated hydrogen even after 20 h. Additionally, poly(methyl methacrylate) with a relatively narrow molecular‐weight distribution was obtained if an initiator (i.e., ethyl α‐bromophenylacetate) was used. The living character of the photoinduced polymerization was confirmed on the basis of successful chain‐extension experiments.     

Visible‐Light‐Promoted Iminyl‐Radical Formation from Acyl Oximes: A Unified Approach to Pyridines,Quinolines, and Phenanthridines

A unified strategy involving visible‐light‐induced iminyl‐radical formation has been established for the construction of pyridines, quinolines, and phenanthridines from acyl oximes. With fac‐[Ir(ppy)₃] as a photoredox catalyst, the acyl oximes were converted by 1 e⁻ reduction into iminyl radical intermediates, which then underwent intramolecular homolytic aromatic substitution (HAS) to give the N‐containing arenes. These reactions proceeded with a broad range of substrates at room temperature in high yield. This strategy of visible‐light‐induced iminyl‐radical formation was successfully applied to a five‐step concise synthesis of benzo[c]phenanthridine alkaloids.