One‐Pot synthesis of functional poly(methacrylate) by ATRP and 1,8‐Diazacyclo‐[5,4,0]undec‐7‐ene catalyzed transesterification

A facile one‐pot 1,8‐diazacyclo‐[5,4,0]undec‐7‐ene (DBU) catalyzed transesterification/atom transfer radical polymerization (ATRP) strategy has been successfully developed through the combination of copper/DBU‐catalyzed ATRP and DBU‐catalyzed transesterification reactions. Well‐defined poly(methacrylate)s with various side ester groups have been synthesized by ATRP and transesterification of acyl donor 2,2,2‐trifluoethyl methacrylate with various alcohols, such as benzyl alcohol, n‐butanol, iso‐propyl alcohol, methanol, triethylene glycol monomethyl ether, propargyl alcohol, and 6‐azido‐1‐hexanol by the one‐pot process. Kinetic studies indicate that the ATRP process proceeded in a controllable manner without the interference of the transesterification reactions. Expansion of the binary system to a higher level ternary system has been successfully achieved by the combination of copper(I)‐catalyzed azide–alkyne cycloaddition, transesterification, and ATRP reactions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2998–3003     

Effect of phenol and derivatives on atom transfer radical polymerization in the presence of air

The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (M_w/M_n < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004     

Radical–radical coupling of polystyrene chains using AGET ATRC

Activators generated by electron transfer (AGET) was integrated into atom transfer radical coupling (ATRC) systems to drastically reduce the amount of copper catalyst required to achieve dimerization of monohalogenated polystyrene (PStX) precursors. PStCl or PStBr, prepared by ATRP, were activated and coupled in ATRC systems with varying equivalents of the reducing agent tin(II) ethyl hexanoate (Sn(EH)₂) with ligand‐bound copper(I) and/or copper(II) present. Effective coupling was only observed in PStBr systems, with total copper content in the reaction mixture able to be reduced into the range of 10–25% of what is typically reported in traditional ATRC reactions of PSt while maintaining coupling yields of >50%. Additional reducing agents, glucose and ascorbic acid, were also studied and were found to be even more effective in some AGET ATRC reactions compared with Sn(EH)₂. Best results were achieved with ascorbic acid as the reducing agent (>80% coupled product) with total copper content 25% of what was used for a traditional ATRC. Using an activators regenerated by electron transfer ATRP–AGET ATRC sequence resulted in an overall reduction of total copper down to 0.1–0.25% for the overall reaction sequence (compared with a traditional ATRP–ATRC sequence). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Utilization of poly(vinylchloride) and poly(vinylidenefluoride) as macroinitiators for ATRP polymerization of hydroxyethyl methacrylate: Electroanalytical and graft‐copolymerization studies

The utilization of poly(vinylchloride) (PVC) and poly(vinylidenefluoride) (PVDF) as macroinitiators for atom transfer radical polymerization (ATRP) of hydroxyethyl methacrylate (HEMA) was studied performing electroanalytical investigations and “grafting from” experiments to evaluate the potential modification of such commercial polymers by ATRP. The study was performed changing various operating parameters such as the nature of the copper salt, the ligand, the solvent, the temperature, and the reaction time. Electroanalytical data suggest that PVC can be easily activated by both CuCl/Tris(2‐pyridylmethyl)amine (TPMA) and CuCl/Tris[2‐(dimethylamino)ethyl]amine (Me₆TREN), two catalytic systems widely adopted for ATRP reactions, in a wide range of operating conditions. PVDF is more difficult to be activated, due to the higher strength of the C? F bond. In particular, the utilization of high temperature and of a more reductant redox couple such as Cu(I)Me₆TREN/Cu(II)Me₆TREN was needed to achieve a significant degree of grafting. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2524–2536     

Atom transfer radical polymerization of functional monomers employing Cu‐based catalysts at low concentration: Polymerization of glycidyl methacrylate

Initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) of an epoxide‐containing monomer, glycidyl methacrylate (GMA), was successfully carried out using low concentration of catalyst (ca. 105 ppm) at 60 °C in anisole. The copper complex of tris(2‐pyridylmethyl)amine was used as the catalyst, diethyl 2‐bromo‐2‐methylmalonate as the initiator, and 2,2′‐azobisisobutyronitrile as the reducing agent. When moderate degrees of polymerization were targeted (up to 200), special purification of the monomer, other than removal of the polymerization inhibitor, was not required to achieve good control. To synthesize well‐defined polymers with higher degrees of polymerization (600), it was essential to use very pure monomer, and polymers of molecular weights exceeding 50,000 g mol^?1 and M_w/M_n = 1.10 were prepared. The developed procedures were used to chain‐extend bromine‐terminated poly(methyl methacrylate) macroinitiator prepared by activators regenerated by electron transfer (ARGET) ATRP. The Sn^II‐mediated ARGET ATRP technique was not suitable for the polymerization of GMA and resulted in polymers with multimodal molecular weight distributions. This was due to the occurrence of epoxide ring‐opening reactions, catalyzed by Sn^II and Sn^IV. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Atom transfer radical polymerization of ionic liquid monomer: The influence of salt/counterion on polymerization

Understanding the influence of salt/counterion on atom transfer radical polymerization (ATRP) is important to optimize the conditions for ATRP of ionic monomers, such as ionic liquid monomer. This article reports the results of a systematical investigation of the variables associated with ATRP in the presence of different types and amounts of salts, solvents, ligands, and monomers. A series of control ATRP experiments were conducted under various polymerization conditions. The kinetics of the polymerizations, the molecular weight, and molecular weight distribution of the formed polymers were studied by nuclear magnetic resonance and gel permeation chromatography. The results indicated that all of the studied variables influenced the ATRP process to different degrees. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2175–2184     

Incorporation of poly(2‐acrylamido‐2‐methyl‐N‐propanesulfonic acid) segments into block and brush copolymers by ATRP

2‐Acrylamido‐2‐methyl‐N‐propanesulfonic acid (AMPSA) was successfully polymerized via atom transfer radical polymerization (ATRP) using a copper chloride/2,2′‐bipyridine (bpy) catalyst complex after in situ neutralization of the acidic proton in AMPSA with tri(n‐butyl)amine (TBA). A 5 mol % excess of TBA was required to completely neutralize the acid and prevent protonation of the bpy ligand, as well as to avoid side reactions caused by large excess of TBA. The use of activators generated by electron transfer (AGET) ATRP with ascorbic acid as reducing agent resulted in both increased conversion of the AMPSA monomer during polymerization (up to 50% with a 0.8 [ascorbic acid]/[Cu(II)] ratio) and much shorter polymerization times (<30 min). Block copolymers and molecular brushes containing AMPSA side chains were prepared using this method, and the solution and surface behavior of these materials were investigated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5386–5396, 2009     

The nature of Cu(II) species in ATRP: New insights via EPR

Identification of the paramagnetic species present in the Cu(I)Br‐catalyzed atom transfer radical polymerization (ATRP) of a model monomer (isobornyl acrylate) has been carried out by electron paramagnetic resonance (EPR) in the continuous wave mode at 90 K. Up to five different species—four copper‐based species and one organic radical—were detected with this technique. The EPR parameters of the copper‐based species are found to differ strongly, and originate from diverse isolated Cu(II) complexes, as well as dipolarly interacting and even exchange‐coupled Cu(II) species. The work highlights the complexity of the copper‐based EPR signal observed in copper‐mediated ATRP reactions. Analysis of the time evolution of the individual EPR contributions reveals the disadvantages of quantitative kinetics studies based on the summed EPR intensity of all copper‐based species, as is commonly used in literature for this type of reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1493–1501, 2010     

Insight into the ATRP rate controlling ability of initiator structure: Micromolecular,macromolecular, and immobilized initiators

The equilibrium constant (K_ATRP) is a key factor for ensuring a successful atom transfer radical polymerization (ATRP), which guarantees a controlled process with predictable product properties. In this work, the effect of initiator type (i.e., micromolecular, macromolecular, and immobilized initiator) on the ATRP kinetics was studied through a developed mathematical model. It was validated thoroughly via experiments using fluorinated monomer (2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) as model component. The results show that the activity and deactivity of the copper(I) chlorine/1,1,4,7,7‐pentamethyldiethylenetriamine (Cu^ICl/PMDETA) heterogeneous catalytic complex is the highest for ethyl 2‐bromoisobutyrate (Eib‐Br), lower for bromo‐poly(styrene) (PS‐Br), and the lowest for bromo‐aminopropyl functionalized SiO₂ (SiO₂‐APTS‐Br). The initiation system of Eib‐Br with Cu^ICl/4,4′‐dinonyl‐2,2′‐bipyridyl (dNbpy) has relatively lower activating ability, but the polymerization keeps controllable by its higher deactivating ability. In addition, this homogeneous catalytic system (Cu^ICl/dNbpy) is facile for further implementing the developed model to guide for the preparation of fluorinated gradient copolymers by semi‐batch ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2228–2238     

High‐throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems

High‐throughput experimentation (HTE) was successfully applied in atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) for the rapid screening and optimization of different reaction conditions. A library of 108 different reactions was designed for this purpose, which used four different initiators [ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, (1‐bromoethyl)benzene, and p‐toluenesulfonyl chloride], five metal salts (CuBr, CuCl, CuSCN, FeBr₂, and FeCl₂), and nine ligands (2,2′‐bipyridine and its derivatives). The optimal reaction conditions for Cu(I) halide, CuSCN, and Fe(II) halide‐mediated ATRP systems with 2,2′‐bipyridine and its 4,4′‐dialkyl‐substituted derivatives as ligands were determined. Cu(I)‐mediated systems were better controlled than Fe(II)‐mediated ones under the examined conditions. A bipyridine‐type ligand with a critical length of the substituted alkyl group (i.e., 4,4′‐dihexyl 2,2′‐bipyridine) exhibited the best performance in Cu(I)‐mediated systems, and p‐toluenesulfonyl chloride and ethyl 2‐bromoisobutyrate could effectively initiate Cu(I)‐mediated ATRP of MMA, resulting in polymers with low polydispersities in most cases. Besides, Cu(I) halide‐mediated ATRP with 4,5′‐dimethyl 2,2′‐bipyridine as the ligand and p‐toluenesulfonyl chloride as the initiator proved to be better controlled than those with 4,4′‐dimethyl 2,2′‐bipyridine as the ligand, and polymers with much lower polydispersities were obtained in the former cases. This successful HTE example opens up a way to significantly accelerate the development of new catalytic systems for ATRP and to improve the understanding of structure–property relationships of the reaction systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1876–1885, 2004     

Iron‐mediated AGET ATRP of methyl methacrylate using metal wire as reducing agent

Methyl methacrylate (MMA) were successfully polymerized by atom transfer radical polymerization with activator generated by electron transfer (AGET ATRP) using copper or iron wire as the reducing agent at 90°C. Well‐controlled polymerizations were demonstrated using an oxidatively stable iron(III) chloride hexahydrate (FeCl₃·6H₂O) as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, and tetrabutylammonium bromide (TBABr) or triphenylphosphine as the ligand. The polymerization rate was fast and affected by the amount of catalyst and type of reducing agents. For example, the polymerization rate of bulk AGET ATRP with a molar ratio of [MMA]₀/[EBiB]₀/[FeCl₃·6H₂O]₀/[TBABr]₀ = 500/1/0.5/1 using iron wire (the conversion reaches up to 82.2% after 80 min) as the reducing agent was faster than that using copper wire (the conversion reaches up to 86.1% after 3 h). At the same time, the experimental M_n values of the obtained poly(methyl methacrylate) were consistent with the corresponding theoretical ones, and the M_w/M_n values were narrow (～1.3), showing the typical features of “living”/controlled radical polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tripodal imidazole containing ligands for copper catalyzed ATRP

Tripodal imidazole containing ligands, bis((2‐pyridyl)methyl)(1‐methylimidazole‐2‐yl)methyl)amine (BPIA) and bis(1‐methylimidazole‐2‐yl)methyl)((2‐pyridyl)methyl)amine (BIPA), were synthesized and used for copper catalyzed atom transfer radical polymerization (ATRP) of n‐butyl acrylate (nBA). The molecular weights of poly(n‐butyl acrylate) (PnBA) catalyzed by CuBr/BPIA and CuBr/BIPA complexes increased linearly with nBA conversions and they were close to theoretical values with low polydispersities. ATRP equilibrium rate constant (K_ATRP) measurements showed that bothCuBr/BPIA and CuBr/BIPA complexes had high K_ATRP values, similar to that of CuBr/tri(2‐pyridylmethyl)amine (TPMA), which is one of the ATRP most active ligands. Activators regenerated by electron transfer (ARGET) ATRP of nBA with CuBr₂/BPIA and CuBr₂/BIPA complexes were also conducted and polymerization reached high nBA conversions, resulting in PnBA with low polydispersities. This suggests that the copper complexes with BPIA and BIPA were sufficiently stable and active to conduct ATRP when catalyst concentration was low. ARGET ATRP to form high molecular weight PnBA with CuBr₂/BPIA and CuBr₂/BIPA complexes was also successful. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2015–2024, 2008     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006     

Cyclopentyl methyl ether: A new green co‐solvent for supplemental activator and reducing agent atom transfer radical polymerization

A new green solvent, cyclopentyl methyl ether (CPME), is used for the first time in solvent mixtures for the successful supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of both activated and non‐activated monomers. The SARA ATRP of methyl acrylate (MA), glycidyl methacrylate (GMA), styrene (Sty), and vinyl chloride (VC) in CPME‐based mixtures is studied and presents similar features to those reported in the literature using other SARA ATRP systems. Moreover, CPME‐based mixtures are suitable solvents for the controlled SARA ATRP of MA using different SARA agents, such as Fe(0), Cu(0), or Na₂S₂O₄. The chemical structure and the retention of the chain‐end functionality of the polymers are confirmed by ¹H NMR and MALDI‐TOF analyses and the preparation of a well‐defined PMA‐b‐PVC‐b‐PMA triblock copolymer. The method reported here presents an additional improvement in the search for new ecofriendly ATRP systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2722–2729     

Precisely controlled copper(0)‐catalyzed one‐pot reaction: Concurrent living radical polymerization and click chemistry

Copper(0)‐catalyzed one‐pot reaction combining living radical polymerization and “click chemistry” was investigated. By precisely tuning reaction time, three novel well‐defined polymers with different degree of carboxyl substitution, poly(propargyl methacrylate) (PPgMA), poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate) (PCTMMA), and poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate‐co‐propargyl methacrylate) (PCTMMA‐co‐PPgMA) were selectively obtained via Cu(0) powder/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) cocatalyzed LRP and click chemistry. In addition, gel permeation chromatography and ¹H NMR analysis in conjunction with FTIR spectroscopy elucidate that one‐pot process undergoes three steps due to a pronounced rate enhancement of click reaction: (1) generating new monomer, 1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate (CTMMA); (2) copolymerization of two monomers (CTMMA and PgMA); (3) building homopolymer PCTMMA. Surprisingly, in contrast to typical Cu(I)‐catalyzed atom transfer radical polymerization (ATRP), copper(0)‐catalyzed one‐pot reaction showed high carboxylic acid group tolerance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Well-defined polymers with acetal side chains as reactive scaffolds synthesized by atom transfer radical polymerization

The synthesis of a polymer with acetal functionalized side chains, deprotection to aldehydes, and conjugation of aminooxy-modified molecules is reported. Poly(3,3′-diethoxypropyl methacrylate) (PDEPMA) was prepared by atom transfer radical polymerization (ATRP). Kinetic investigation of the ATRP of DEPMA from ethyl 2-bromoisobutyrate in methanol with copper (I) bromide and 2,2′-bipyridine (BIPY) at ambient temperature revealed a controlled polymerization. Altering the initial monomer to initiator ratios resulted in 75–93% conversion to polymers with different molecular weights and narrow molecular weight distributions (PDIs < 1.3). Reactive aldehyde groups were produced by hydrolysis of the acetals in dilute acid. Aminooxy-functionalized oligo(ethylene glycol) and O-(carboxymethyl)hydroxylamine were conjugated to the side chains via oxime linkages. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5004–5013, 2006     

Bis(β‐ketoamino)copper(II)/methylaluminoxane systems for homo‐ and copolymerizations of methyl acrylate and 1‐hexene

Two bis(β‐ketoamino)copper [ArNC(CH₃)CHC(CH₃)O]₂Cu ( 1 , Ar = 2,6‐dimethylphenyl; 2 , Ar = 2,6‐diisopropylphenyl) complexes were synthesized and characterized. Homo‐ and copolymerizations of methyl acrylate (MA) and 1‐hexene with bis(β‐ketoamino)copper(II) complexes activated with methylaluminoxane (MAO) were investigated in detail. MA was polymerized in high conversion (>72%) to produce the syndio‐rich atactic poly(methyl acrylate), but 1‐hexene was not polymerized with copper complexes/MAO. Copolymerizations of MA and 1‐hexene with 1 , 2 /MAO produced acrylate‐enriched copolymers (MA > 80%) with isolated hexenes in the backbone. The calculation of reactivity ratios showed that r(MA) is 8.47 and r(hexene) is near to 0 determined by a Fineman‐Ross method. The polymerization mechanism was discussed, and an insertion‐triggered radical mechanism was also proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1113–1121, 2010     

Antibacterial poly(ethylene terephthalate) surfaces obtained from thymyl methacrylate polymerization

Thymol, an antibacterial agent was used for the preparation of a methacrylic monomer. The conventional and atom transfer radical (ATRP) polymerizations of this monomer were studied using different conditions. Then, the functionalization of poly(ethylene terephthalate) (PET) films by “grafting from” ATRP using this monomer was investigated. In this aim, a three steps procedure was developed. The surfaces were first treated by NH₃ plasma treatment to incorporate primary amino functions. Then, in a second step, ATRP initiator was grafted by reaction with bromoisobutyryl bromide. Surface initiated ATRP of thymyl methacrylate was performed in solution in the presence of a sacrificial initiator. The efficiency of these reactions was confirmed by X‐ray photoelectron spectroscopy. Wetting properties and surface energy were found to vary systematically depending to the type of functionalization and grafting. The poly(thymyl methacrylate)‐grafted PET surfaces exhibit resistance to bacterial adhesion toward Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus strains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1975–1985