Transparent and Superamphiphobic Surfaces from One‐Step Spray Coating of Stringed Silica Nanoparticle/Sol Solutions

Transparent and superamphiphobic coatings that repel both water and low‐surface‐tension oil offer energy and environmental benefits to building windows, solar cell panels, electronic displays, and other optical equipment. Here, we developed a solution consisting of stringed amphiphilic silica nanoparticles (NPs) and an amphiphilic sol, which could be spray coated onto a variety of planar and curved substrates in one step. High transparency, water/oil contact angles greater than 150° and roll‐off angles less than 10° were demonstrated. The stringed NPs formed a fractal‐like nanoporous network, while the sol acted as a surface modifier and binder to enhance the coating robustness against heating (up to 400 °C), water jetting, and sand abrasion.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Nuclear Uptake of Gold Nanoparticles Deduced Using Dual‐Angle X‐Ray Fluorescence Mapping

Studies into the cell nucleus' incorporation of gold nanoparticles (AuNPs) are often limited by ambiguities arising from conventional imaging techniques. Indeed, it is suggested that to date there is no unambiguous imaging evidence for such uptake in whole cells, particularly at the single nanoparticle level. This shortcoming in understanding exists despite the nucleus being the most important subcellular compartment in eukaryotes and gold being the most commonly used metal nanoparticle in medical applications. Here, dual‐angle X‐ray flouresence is used to show individually resolved nanoparticles within the cell nucleus, finding them to be well separated and 79% of the intranuclear population to be monodispersed. These findings have important implications for nanomedicine, illustrated here through a specific exemplar of the predicted enhancement of radiation effects arising from the observed AuNPs, finding intranuclear dose enhancements spanning nearly five orders of magnitude.     

Structuring of Surfaces with Gold Nanoparticles by Using Bessel‐Like Beams

Here, the structuring of surfaces with gold nanoparticles by using Bessel‐like beam array is demonstrated. The experimental results show that the fabricated microring structures containing gold nanoparticles have a surface plasmon resonance in the spectral range of 520–540 nm, which can be tuned by selecting the laser treatment parameters. Fabricated microring structures exhibit a lower light transmittance comparing with the randomly distributed gold nanoparticles for wavelengths 500–570 nm due to the growth in the size of nanoparticles. In the spectral range of 600–700 nm, the light transmittance through microring structures is higher compared with the randomly distributed gold nanoparticles because of the removal of gold nanoparticles as gold has high reflectivity for wavelengths longer than 600 nm. The demonstrated method enables an easy fabrication of microring structures having tunable plasmonic properties.     

Glutathione‐Mediated Degradation of Surface‐Capped MnO2 for Drug Release from Mesoporous Silica Nanoparticles to Cancer Cells

Owing to its higher concentration in cancer cells than that in the corresponding normal cells, glutathione (GSH) provides an effective and flexible mechanism to design drug delivery systems. Here a novel GSH‐responsive mesoporous silica nanoparticle (MSN) is reported for controlled drug release. In this system, manganese dioxide (MnO₂) nanostructure, formed by the reduction of KMnO₄ on the surface of carboxyl‐functionalized MSN can block the pores (MSN@MnO₂). By a redox reaction, the capped MnO₂ nanostructure can dissociate into Mn²⁺ in the presence of GSH molecules. The blocked pores are then uncapped, which result in the release of the entrapped drugs. As a proof‐of‐concept, doxorubicin (DOX) as model drug is loaded into MSN@MnO₂. DOX‐loaded MSN@MnO₂ shows an obvious drug release in 10 × 10^?3 m GSH, while no release is observed in the absence of GSH. In vitro studies using human hepatocellular liver carcinoma cell line (HepG2) prove that the DOX‐loaded MSN@MnO₂ can entry into HepG2 cells and efficiently release the loaded DOX, leading to higher cytotoxicity than to that of human normal liver cells (L02). It is believed that further developments of this GSH‐responsive drug delivery system will lead to a new generation of nanodevices for intracellular controlled delivery.     

Nanoparticles Engineering for Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have been extensively investigated due to the ever‐increasing demand for new electrode materials for electric vehicles (EVs) and clean energy storage. A wide variety of nano/microstructured LIBs electrode materials are hitherto created via self‐assembly, ranging from 0D nanospheres; 1D nanorods, nanowires, or nanobelts; and 2D nanofilms to 3D nanorod array films. Nanoparticles can be utilized to build up integrated architectures. Understanding of nanoparticles’ self‐assembly may provide information about their organization into large aggregates through low‐cost, high‐efficiency, and large‐scale synthesis. Here, the focus is on the recent advances in preparing hierarchically nano/microstructured electrode materials via self‐assembly. The hierarchical electrode materials are assembled from single component, binary to multicomponent building blocks via different driving forces including diverse chemical bonds and non‐covalent interactions. It is expected that nanoparticle engineering by high‐efficient self‐assembly process will impact the development of high‐performance electrode materials and high‐performance LIBs or other rechargeable batteries.     

Determination of the Recoilless Fraction in Iron Oxide Nanoparticles Using the Two-lattice Method

We propose a two-lattice method for direct determination of the recoilless fraction using a single room-temperature transmission Mössbauer measurement. The method is first demonstrated for the case of iron and metallic glass two-foil system and is next generalized for the case of physical mixtures of two powders. We further apply this method to determine the recoilless fraction of hematite and magnetite particles. Finally, we provide direct measurement of the recoilless fraction in nanohematite and nanomagnetite with an average particle size of 19nm. A list of values obtained for the recoilless fraction in various materials using the two-lattice method is given.     

Scattering Invisibility With Free‐Space Field Enhancement of All‐Dielectric Nanoparticles

Simultaneous scattering invisibility and free‐space field enhancement have been achieved based on multipolar interferences among all‐dielectric nanoparticles. The scattering properties of all‐dielectric nanowire quadrumers are investigated and two sorts of scattering invisibilities have been identified: the trivial invisibility where the individual nanowires are not effectively excited; and the nontrivial invisibility with strong multipolar excitations within each nanowire, which results in free‐space field enhancement outside the particles. It is revealed that such nontrivial invisibility originates from not only the simultaneous excitations of both electric and magnetic resonances, but also their significant magnetoelectric cross‐interactions. We further show that the invisibility obtained is both polarization and direction selective, which can probably play a significant role in various applications including non‐invasive detection, sensing, and non‐disturbing medical diagnosis with high sensitivity and precision.     

Two‐Photon Imaging of a Cellular Line Using Organic Fluorescent Nanoparticles Synthesized by Laser Ablation

A comparative study of the optical properties of organic fluorescent nanoparticles fabricated by laser ablation (NPs‐LA), reprecipitation (NPs‐RP), and microemulsion (NPs‐ME) methods is presented. These nanoparticles contain a fluorene‐based p‐conjugated molecule (BT2). Distinctive electronic transitions are observed in samples due to the specific way in which the molecule BT2 is assembled in each type of nanoparticles; for instance, transitions involved in absorption and emission spectra of NPs‐LA result in blueshifting with respect to the molecular solution of BT2, whereas redshifting is observed in NPs‐RP and NPs‐ME. Further, the results show that under infrared excitation, the aqueous suspensions of NPs‐LA exhibit the highest fluorescence induced by two‐photon absorption (≈790 GM at 740 nm), as well as the best photostability, compared with aqueous suspensions of NPs‐RP and NPs‐ME. The nanoparticles synthetized by the three aforementioned methods are employed as exogenous agents for the visualization of human cervical cancer cell line (HeLa) using confocal and two‐photon microscopy. Under similar experimental conditions, it is found that microscopy images of the best quality are obtained with NPs‐LA. These results show that laser ablation is a suitable technique for the fabrication of organic fluorescent nanoparticles used as contrast agents for in vitro fluorescence microscopy.     

Phosphonated Polyethylenimine‐Coated Nanoparticles: Size‐ and Zeta‐Potential‐Adjustable Nanomaterials

Novel partially phosphonated polyethylenimine polymers are developed in order to control the modification of nanoparticle (NP) surfaces. This polymer is built by an accessible one‐step process. The numerous phosphonate functions assume both a strong covalent anchoring on metal oxide NPs and a modulation of electric charges, while amino groups are associated with dispersion preservation and subsequent biofunctionalization. The zwitterionic nanomaterials obtained display a good stability toward pH and ionic strength. According to the selected percentage of phosphonation and the polymer size, zeta potential, and diameter of the particles are controlled.     

Metal Nanoparticle Coating of Oxide Nanospheres for Core‐Shell Structures

A low‐temperature route for coating oxide nanospheres with metal nanoparticles to achieve core‐shell structures is introduced. First results indicating a dense coverage of silica nanospheres of about 300 nm size with regularly arranged Ag and Au nanoparticles deposited by a modified incipient wetness impregnation procedure are presented. This synthesis works completely without external reducing agents or media, adhesive aids or functionalizing agents. Metal particles of only a few nanometers in size may serve as seeds for continuous metal coating of the oxide spheres by complementary processes. Structural characterization of the materials by transmission electron microscopy reveals a nearly spherical shape of the metal particles, the structure of which ranges from single crystalline to single twinned and multiply twinned configurations.     

The Internalization,Distribution, and Ultrastructure Damage of Silica Nanoparticles in Human Hepatic L‐02 Cells

Nowadays, due to the wide use of amorphous silica nanoparticles (SiNPs), their adverse effects on human beings are attracting more attention. Understanding the interaction between SiNPs and cells is a fundamental step for toxicity assessment. Therefore, the current study is aimed at elaborating the internalization process, subcellular distribution, ultrastructure damage, and cytotoxicity of two different sizes of SiNPs (Nano‐Si64 and Nano‐Si46) in L‐02 cells. The results indicate that the smaller‐sized SiNPs, Nano‐Si46, accumulate in cells more efficiently and produce a stronger cytotoxic effect than Nano‐Si64. Both types of nanoparticles can accumulate in L‐02 cells through the active endocytotic pathway and passive diffusion, and distribute within endocytotic vesicles or freely in cytoplasma and organelles. Microvillus fracture, membrane injury, mitochondria damage, degranulation of the rough endoplasmic reticulum, lamellar‐like structure, lysosome destruction, autophagosomes, and autophagy‐lysosomes are found in L‐02 cells. Oxidative damage and direct interaction between SiNPs and subcellular structure are responsible for the toxicity.     

Doping of Fullerene‐Like MoS2 Nanoparticles with Minute Amounts of Niobium

Inorganic fullerene‐like closed‐cage nanoparticles of MoS₂ and WS₂ (IF‐MoS₂; IF‐WS₂), are synthesized in substantial amounts and their properties are widely studied. Their superior tribological properties led to large scale commercial applications as solid lubricants in numerous products and technologies. Doping of these nanoparticles can be used to tune their physical properties. In the current work, niobium (Nb) doping of the nanoparticles is accomplished to an unprecedented low level (≤0.1 at%), which allows controlling the work function and the band gap. The Nb contributes a positive charge, which partially compensates the negative surface charge induced by the intrinsic defects (sulfur vacancies). The energy diagram and position of the Fermi level on the nanoparticles surface is determined by Kelvin probe microscopy and optical measurements. Some potential applications of these nanoparticles are briefly discussed.     

Organometal Halide Perovskites: Bulk Low‐Dimension Materials and Nanoparticles

Organometal halide perovskites (hybrid perovskites) contain an anionic metal–halogen‐semiconducting framework and charge‐compensating organic cations. As hybrid materials, they combine useful properties of both organic and inorganic materials, such as plastic mechanical properties and good electronic mobility related to organic and inorganic material, respectively. They are prepared from abundant and low cost starting compounds. The perovskite stoichiometry is associated with the dimensionality of its inorganic framework, which can vary from three to zero, 3D consisting of corner‐sharing MX₆ octahedra, and 0D consisting of isolated octahedra. Small‐sized organic cations can fit into the MX₆ octahedra of the 3D framework and in all dimensions organic cations surround the inorganic framework. Regarding the low dimensionality in the material, this refers to at least one of its dimensions being shorter than approximately 100 nanometers. These materials should be considered as genuine nanomaterials or as bulk materials depending on whether they have three or less than three dimensions on the nanoscale, respectively. In principle, hybrid perovskite nanoparticles can be prepared with different shapes and with inorganic framework dimensionalities varying from 0D to 3D, and this also applies to the bulk material. This report is mainly focused on the unique properties of organometal halide perovskite nanoparticles.     

Probing Zinc–Protein–Chelant Interactions Using Gold Nanoparticles Functionalized with Zinc‐Responsive Polypeptides

The coordination of zinc by proteins and various other organic molecules is essential for numerous biological processes, such as in enzymatic catalysis, metabolism, and signal transduction. Presence of small molecular chelants can have a profound effect on the bioavailability of zinc and affect critical Zn²⁺–protein interactions. Zn²⁺ chelators are also emerging therapeutics for Alzheimer's disease because of their preventive effect on zinc‐promoted amyloid formation. Despite the importance of zinc–protein–chelant interactions in biology and medicine, probing such interactions is challenging. Here, an innovative approach is introduced for real‐time characterization of zinc–protein–chelant interactions using gold nanoparticles (AuNPs) functionalized with a zinc‐responsive protein mimetic polypeptide. The peptide‐functionalized AuNPs aggregate extensively in the presence of Zn²⁺, triggered by specific Zn²⁺‐mediated polypeptide dimerization and folding, causing a massive red shift of the plasmon band. Chelants affects the Zn²⁺–polypeptide interaction and thus the aggregation differently depending on their concentrations, zinc‐binding affinities, and coordination numbers, which affect the position of the plasmon band. This system is a simple and powerful tool that provides extensive information about the interactions of chelants in the formation of Zn²⁺ coordination complexes, and an interesting platform for development of bioanalytical techniques, and characterization of chelation‐based therapeutics.     

Synthesis of α‐Willemite Nanoparticles by Post‐calcination of Flame‐made Zinc Oxide/Silica Composites

Composite ZnO/SiO₂ nanoparticles were made by flame spray pyrolysis (FSP). Characteristics of the product powder and its crystallization behavior on post‐calcination were evaluated. Polyhedral aggregates of nano‐sized primary particles consisting of ZnO nano‐crystals 1–3 nm in size and amorphous SiO₂ were obtained by FSP. A short residence time in the flame can result in the co‐existence of the ZnO and SiO₂ clusters without substitution or reaction hindering each other's grain growth. There was almost no change in the XRD pattern by calcination at 600 °C for 2 h, suggesting a high thermal stability of the ZnO nano‐crystals in the composite particles. A pure α‐willemite phase was obtained at 900 °C. At this calcination temperature, d_C and d_BET of the powder were 63 and 44 nm, respectively. The nano‐composite structure of the FSP‐made particles can suppress crystalline growth of ZnO during calcination to maintain a high reactivity of ZnO with SiO₂, obtaining pure α‐willemite with high specific surface area at low calcination temperatures.     

Theranostic Iron@Gold Core–Shell Nanoparticles for Simultaneous Hyperthermia‐Chemotherapy upon Photo‐Stimulation

The challenges of nanoparticles, such as size‐dependent toxicity, nonbiocompatibility, or inability to undergo functionalization for drug conjugation, limit their biomedical application in more than one domain. Oval‐shaped iron@gold core–shell (oFe@Au) magnetic nanoparticles are engineered and their applications in magnetic resonance imaging (MRI), optical coherence tomography (OCT), and controlled drug release, are explored via photo stimulation‐generated hyperthermia. The oFe@Au nanoparticles have a size of 42.57 ± 5.99 nm and consist of 10.76 and 89.24 atomic % of Fe and Au, respectively. Upon photo‐stimulation for 10 and 15 minutes, the levels of cancer cell death induced by methotrexate‐conjugated oFe@Au nanoparticles are sixfold and fourfold higher, respectively, than oFe@Au nanoparticles alone. MRI and OCT confirm the application of these nanoparticles as a contrast agent. Finally, results of in vivo experiments reveal that the temperature is elevated by 13.2 °C, when oFe@Au nanoparticles are irradiated with a 167 mW cm^?2 808 nm laser, which results in a significant reduction in tumor volume and scab formation after 7 days, followed by complete disappearance after 14 days. The ability of these nanoparticles to generate heat upon photo‐stimulation also opens new doors for studying hyperthermia‐mediated controlled drug release for cancer therapy. Applications include biomedical engineering, cancer therapy, and theranostics fields.