Synthesis of methylene butyrolactone polymers from itaconic acid

Herein, we report the transformation of β‐monomethyl itaconate, an inexpensive and biorenewable alternative to petroleum feedstocks, to the high‐value monomer α‐methylene‐γ,γ‐dimethyl‐γ‐butyrolactone (Me₂MBL) through a selective addition strategy. This strategy is also applied to the synthesis of α‐methylene‐γ‐butyrolactone (MBL, tulipalin A), a monomer that can be polymerized to give materials with desirable properties (high decomposition temperature, glass transition temperature, and refractive index). Subsequent polymerization of both Me₂MBL and MBL through reversible addition‐fragmentation chain‐transfer polymerization generates well‐defined poly(Me₂MBL) and poly(MBL) (PMBL). Physical characterization of poly(Me₂MBL) shows good physical properties comparable with known PMBL materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2730–2737     

Synthesis of hyperbranched polyacetals via an + b2‐type polyaddition (n = 3, 8, 18, and 21): Candidate resists for extreme ultraviolet lithography

Polyaddition (A_n + B₂) reactions of 1,1,1‐tris(4‐hydoxyphenyl) ethane (THPE; A₃‐type monomer), calix[4]resorcinarene (CRA[4]; A₈‐type monomer), α‐cyclodextrin (α‐CD; A₁₈‐type monomer), and β‐cyclodextrin (β‐CD; A₂₁‐type monomer) with 1,4‐bis(4‐vinyloxy)cyclohexane (BVOC; B₂‐type monomer) afforded corresponding soluble hyperbranched polyacetals. The physical properties, including solubility, thermal stability, and film‐forming ability, the ultraviolet‐induced degradation reactivity, and the solubility‐switch in an extreme ultraviolet (EUV) exposure tool indicated that poly(THPE‐co‐BVOC) and poly(CRA[4]‐co‐BVOC) are candidate next‐generation photo‐resists. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2343–2350     

Modeling the free radical polymerization of acrylates

Acrylates have gained importance because of their ease of conversion to high‐molecular‐weight polymers and their broad industrial use. Methyl methacrylate (MMA) is a well‐known monomer for free radical polymerization, but its α‐methyl substituent restricts the chemical modification of the monomer and therefore the properties of the resulting polymer. The presence of a heteroatom in the methyl group is known to increase the polymerizability of MMA. Methyl α‐hydroxymethylacrylate (MHMA), methyl α‐methoxymethylacrylate (MC₁MA), methyl α‐acetoxymethylacrylate (MAcMA) show even better conversions to high‐molecular‐weight polymers than MMA. In contrast, the polymerization rate is known to decrease as the methyl group is replaced by ethyl in ethyl α‐hydroxymethylacrylate (EHMA) and t‐butyl in t‐butyl α‐hydroxymethylacrylate (TBHMA). In this study, quantum mechanical tools (B3LYP/6‐31G*) have been used in order to understand the mechanistic behavior of the free radical polymerization reactions of acrylates. The polymerization rates of MMA, MHMA, MC₁MA, MAcMA, EHMA, TBHMA, MC₁AN (α‐methoxymethyl acrylonitrile), and MC₁AA (α‐methoxymethyl acrylic acid) have been evaluated and rationalized. Simple monomers such as allyl alcohol (AA) and allyl chloride (AC) have also been modeled for comparative purposes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Microstructure analysis and thermal property of copolymers made of glycolide and ϵ‐caprolactone by stannous octoate

Glycolide (GL) and ?‐caprolactone (CL) were copolymerized in bulk at relatively high temperatures using stannous octoate as a catalyst. To investigate the relationship among microstructure, thermal properties, and crystallinity, three series of copolymers prepared at various reaction temperatures, times, and comonomer feed ratios were prepared and characterized by ¹H and ¹³C NMR, DSC, and wide‐angle X‐ray diffraction (WAXD). The 600‐MHz ¹H NMR spectra provided information about not only the copolymer compositions but also about the chain microstructure. The reactivity ratios (r_G and r_C) were calculated from the monomer sequences and were 6.84 and 0.13, respectively. In terms of overall feed compositions, the sequence lengths of the glycolyl units calculated from the reactivity ratios exceeded those measured from the polymeric products. Mechanistic considerations based on reactivity ratios, monomer consumption data, and average sequence lengths are discussed. The unusual phase diagram of GL/CL copolymers implies that the copolymer melting temperature does not depend on its composition alone but rather on the nature of the sequence distribution. The DSC and WAXD measurements show a close relationship between polymer crystallinity and the nature of the polymer sequence. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 544–554, 2002; DOI 10.1002/pola.10123     

Alkylamines‐intercalated α‐zirconium phosphate as latent thermal anionic initiators

The reaction of glycidyl phenyl ether (GPE) with 1‐aminoalkanes‐intercalated α‐zirconium phosphate (α‐ZrP·1‐aminoalkane): 1‐aminoalkanes 1‐aminopropane (α‐ZrP·Pr), 1‐aminobutane (α‐ZrP·Bu), 1‐aminooctane (α‐ZrP·Oct), and 1‐aminohexadecane (α‐ZrP·Hed) was carried out at varying temperatures for 1 h periods. Reaction progress was not observed until the reactants were heated to 80 °C or above. On increasing the temperature, the conversion factors increased such that, at 140 °C, conversions of 62% (α‐ZrP·Pr), 60% (α‐ZrP·Bu), 67% (α‐ZrP·Oct), and 64% (α‐ZrP·Hed) were obtained. The thermal stabilities as latent initiators were tested: GPEs reacted with α‐ZrP·Pr, α‐ZrP·Bu, and α‐ZrP·Oct at 40 °C for 360 h achieved conversions of 83, 55, and 59%, respectively. In contrast, the reaction in the presence of α‐ZrP·Hed did not proceed at 40 °C. The order of the thermal stability of GPE in the presence of α‐ZrP·1‐aminoalkane intercalation compounds was: α‐ZrP·Hed > α‐ZrP·Bu ≈ α‐ZrP·Oct > α‐ZrP·Pr. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1854–1861     

Synthesis,characterization, and cross‐linking of a library of statistical copolymers based on 2‐“soy alkyl”‐2‐oxazoline and 2‐ethyl‐2‐oxazoline

The synthesis of statistical copolymers consisting of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐“soy alkyl”‐2‐oxazoline (SoyOx) via a microwave‐assisted cationic ring‐opening polymerization procedure is described. The majority of the resulting copolymers revealed polydispersity indices below 1.30. The reactivity ratios (r_EtOx 1.4 ± 0.3; r_SoyOx = 1.7 ± 0.3) revealed a clustered monomer distribution throughout the polymer chains. The thermal and surface properties of the pEtOx‐stat‐SoyOx copolymers were analyzed before and after UV‐curing demonstrating the decreased chain mobility after cross‐linking. In addition, the cross‐linked materials showed shape‐persistent swelling upon absorption of water from the air, whereby as little as 5 mol % SoyOx was found to provide efficient cross‐linking. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5371,–5379, 2007     

Batch emulsion copolymerization of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D‐glucofuranose and butyl acrylate: Synthesis and properties of the sugar latices

To obtain new polymer latices based on sugar derivative, batch emulsion copolymerizations of 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and n‐butyl acrylate (BA) were carried out at 70 °C, with potassium persulfate as the initiator. 3‐MDG polymerizes faster than BA because of its higher reactivity ratio, r_(3‐MDG) = 1.94 versus r_(BA) = 0.54. The effect of the initial monomer composition on the polymerization rate and the thermal properties of the end copolymers was investigated. The overall rate of polymerization increases by enhancing the sugar content in the initial monomer composition. The glass‐transition temperature is linearly related to the sugar content in the copolymer. The influence of the type of surfactant showed that the particle size increases by changing from ionic to nonionic surfactant. Furthermore, the effect of the added acrylic acid (AA) on the rheological properties suggests that the sugar latices exhibit different non‐Newtonian flows depending on the pH of the latex and on the AA concentration on the particle surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 788–803, 2003     

Norbornene/n‐Butyl methacrylate copolymerization over α‐Diimine nickel and palladium catalysts supported on multiwalled carbon nanotubes

The covalently immobilized multiwalled carbon nanotubes (MWNTs) supported three‐dimensional geometry α‐diimine nickel, palladium catalysts are prepared by corresponding α‐diimine nickel, palladium complexes and activated MWNTs. The molecular structures of the catalysts have been confirmed by X‐ray single‐crystal analyses, NMR and XPS, as well as elemental analysis. Compared with nickel, palladium catalysts without modification and physical mixing of nickel, palladium catalysts with MWNTs, the MWNTs supported nickel, palladium catalysts show improved activity and productivity in norbornene homopolymerization and copolymerization with polar monomer. The morphology of the resulting polymers obtained from MWNTs‐supported nickel(II) complex reveals that the MWNTs are dispersed uniformly in polymer and wrapped by polymers to squeeze out of spherical particles, leading to the enhanced processability and mechanical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3213–3220     

Polymerization of higher α‐olefins using a Cs‐symmetry hafnium metallocene catalyst. Kinetics of the polymerization and microstructural analysis

The C_s‐symmetry hafnium metallocene [(p‐Et₃Si)C₆H₄]₂C(2,7‐di‐tert‐BuFlu)(C₅H₄)Hf(CH₃)₂ and tetrakis(pentafluorophenyl) borate dimethylanilinium salt ([B(C₆F₅)₄]^?[Me₂NHPh]⁺) were used as the catalytic system for the polymerization of higher α‐olefins (from hexene‐1 to hexadecene‐1) in toluene at 0 °C. The evolution of the polymerization was studied regarding the variation of the molecular weight, molecular weight distribution and yield with time. The effect of the monomer structure on the polymerization kinetics was established. The role of trioctylaluminum in accelerating the polymerization was investigated. ¹³C NMR spectroscopy was used to study the microstructure of the poly(α‐olefins) by the determination of the pentad monomer sequences. The thermal properties of the polymers were obtained by differential scanning calorimetry, DSC. The results were discussed in connection with the polymer microstructure. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4314–4325, 2009     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Synthesis and properties of polyethylene with side‐chain triphenylamines as hole‐transporting materials

The copolymerization of ethylene with triphenylamine (TPA)‐containing α‐olefin monomer 1 using a rac‐Et(Ind)₂ZrCl₂ ( EBIZr )/MAO catalytic system was investigated to prepare polyethylene with pendent TPA groups. Despite the presence of a large excess of TPA moieties, the polymerization reactions efficiently produce copolymers of high‐molecular‐weight with the comonomer incorporation up to 6.1 mol % upon varying the comonomer concentration in the feed. Inspection of the aliphatic region of the ¹³C‐NMR spectrum and the estimated copolymerization parameters (r ₁ ≈ 0 for 1 and r_E ≈ 43 for ethylene) reveal the presence of isolated comonomer units in the polymer chain. While UV–vis absorption measurements of the copolymers show an invariant absorption feature, PL spectra exhibit a slightly red‐shifted emission with increasing content of 1 in the polymer chain. All the copolymers show high thermal stability (T_d5 > 436 °C), and the electrochemical stability toward oxidation is also observed. Particularly, the copolymer displays hole‐transporting ability for the stable green emission of Alq₃ when incorporated into the hole‐transporting layer of an electroluminescence device. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5816–5825, 2008     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Synthesis and characterization of cationic copolymers of butylacrylate and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride

Cationic copolymers of butylacrylate (BA) and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride (MAPTAC) were synthesized by free‐radical‐solution polymerization in methanol and ethanol. An FT‐Raman Spectrometer and NMR were used to monitor the polymerization process. The copolymers were characterized by light scattering, NMR, DSC, and thermogravimetric analysis. It was found that random copolymers could be prepared, and the molar fractions of BA and cationic monomers in the copolymers were close to the feed ratios. The copolymer prepared in methanol had a higher molecular weight than that prepared in ethanol. As the cationic monomer content increased, the glass‐transition temperature (T_g) of the copolymer also increased, whereas the thermal stability decreased. The reactivity ratios for the monomers were evaluated. The copolymerization of BA (M₁) with MAPTAC (M₂) gave reactivity ratios such as r₁ = 0.92 and r₂ = 2.61 in ethanol as well as r₁ = 0.79 and r₂ = 0.90 in methanol. This study indicated that a random copolymer containing a hydrophobic monomer (BA) and a cationic hydrophilic monomer (MAPTAC) could be prepared in a proper polar solvent such as methanol or ethanol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1031–1039, 2001     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Cobalt(III)‐complex‐mediated terpolymerization of CO2, styrene oxide,and epoxides with an electron‐donating group

Terpolymerizations of CO₂, styrene oxide (SO), and epoxides with an electron‐donating group such as propylene oxide (PO) or cyclohexene oxide (CHO) were carried out by using Co(III)–salen complexes in the presence of an intra‐ or intermolecular nucleophilic cocatalyst. The resultant terpolymers have only one thermolysis peak and one glass transition temperature (T_g), which can be easily adjusted by controlling the proportion of styrene carbonate linkages. During the CO₂/SO/PO terpolymerization, the monomer reactivity ratios (r_SO = 0.18 and r_PO = 2.25) evaluated by Fineman–Ross plot indicates a random distribution of the two kinds of carbonate units in the resultant polymer. Contrarily, the monomer reactivity ratios were found to be r_SO = 0.48 and r_CHO = 0.79 in the CO₂/SO/CHO terpolymerization, indicating that an alternating nature of the two different carbonate units predominantly exists in the resultant polycarbonate. The regioselective ring opening of SO has a significant effect on the reactivities of both SO and CHO during the terpolymerization with CO₂. The matched reactivity is contributed to the enhanced regioselective ring opening of SO, caused by the attack of the dissociating polymer carboxylate anion, bearing a cyclohexene carbonate end unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Morphological change of poly (ε‐caprolactone) with a wide range of molecular weight via formation of inclusion complex with α‐cyclodextrin

The effect of molecular weight of poly(ε‐caprolactone) (PCL) on the formation and stability of inclusion complexes (ICs) between α‐cyclodextrin (α‐CD) and PCL was investigated by FTIR, WAXD, and DSC measurements. ICs between α‐CD and PCLs with a wide range of number‐average molecular weight, M_n = 1.21 × 10⁴ – 1.79 × 10⁵, were prepared by mixing the aqueous solution of CD and acetone solution of PCL followed by stirring at 60 °C for 1h and at the room temperature for 1 day. FTIR, WAXD, and DSC measurement showed the PCL chains were included into the α‐CD cavity, and the crystallization of PCL was suppressed in the α‐CD cavity. Stoichiometry and yield of each IC varied with the molecular weight of guest PCL, and the effect of IC formation on the crystallization behaviour of guest polymer decreased with the increase of molecular weight of guest polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1433–1440, 2005