Triallyl monomer bearing adamantane‐like core derived from naturally occurring myo‐inositol: Synthesis and polyaddition with dithiols

This paper deals with a triallyl monomer bearing a rigid adamantane‐like core derived from myo‐inositol, a naturally occurring cyclic hexaol. The core structure of the monomer can be readily constructed by orthoesterification of myo‐inositol. The polyaddition of the triallyl monomer with dithiols based on the thermally induced radical thiol‐ene reaction gives the corresponding networked polymers. These networked polymers exhibit much higher thermal stability than the comparative networked polymers obtained from a triallyl monomer bearing less rigid cyclohexyl core. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1193–1199     

Radical Polymerization of methacrylates with an adamantane‐like rigid core derived from naturally occurring myo‐inositol

Trimethacrylate and dimethacrylate with rigid adamantane‐like cores were synthesized from myo‐inositol orthoester, and their radical homopolymerization and copolymerization with methyl methacrylate (MMA) were investigated. The radical homopolymerization of trimethacrylate yielded a networked polymer with higher thermal stability than that of a networked polymer synthesized by radical homopolymerization of 1,3,5‐cyclohexanetriol‐derived trimethacrylate, demonstrating the effect of adamantane‐like core rigidity on the increase in thermal stability. Further, dimethacrylate underwent cyclopolymerization, forming a macrocyclic structure in the repeating unit, as the two methacrylate groups were oriented axially from the rigid orthoester‐core and thus located close to each other. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2411–2420     

Synthesis of chromophore‐embedded polyurethanes for electrooptical materials

We carried out the polyaddition of dye‐embedded diols with diisocyanates to obtain novel nonlinear optical (NLO) polyurethanes, where the NLO units were embedded in the polymer backbone. The obtained polymers showed high glass‐transition temperatures (138–184 °C) and thermal stability (temperature of 10% weight loss under nitrogen = 227–287 °C). The λ maximum of the polymers was 521–556 nm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2620–2624, 2001     

Rigid diol bearing 6‐6‐6 fused ring system derived from naturally occurring myo‐inositol and its polyaddition with diisocyanates

Naturally occurring myo‐inositol was developed into a highly rigid diol by converting its 3,4‐ and 1,6‐vicinal diols in trans configuration into the corresponding butane‐2,3‐diacetals. The resulting diol bearing 6‐6‐6 fused ring system, in which conformational change is strictly suppressed, was combined with diisocyanates to perform polyadditions. The resulting polyurethanes were analyzed by differential scanning calorimetry, and it was found that their glass transition temperatures were much higher than those of the previously reported myo‐inositol‐derived polyurethanes, which were synthesized from a myo‐inositol‐derived diol bearing 5‐6‐5 fused ring system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3798–3803     

Partially bio‐based tri‐ and hexaallyl monomers: Synthesis from naturally occurring myo‐inositol and polyaddition with dithiols

myo‐Inositol, a naturally occurring cyclic hexaol, was converted to 2,4,6‐tri‐O‐allyl‐myo‐inositol and 1,2,3,4,5,6‐hexa‐O‐allyl‐myo‐inositol. Polyaddition of the former product, a tri(allyl ether) bearing three hydroxyl groups, with dithiols yielded the corresponding networked polymers. Their glass transition temperatures (T_gs) were higher than those of networked polymers formed by the polyaddition of 1,3,5‐tri‐O‐methyl‐2,4,6‐tri‐O‐allyl‐myo‐inositol. This implied the reinforcement of the networks by hydrogen bonding between the hydroxyl groups. Polyaddition of the latter product, a hexa(allyl ether), with dithiols yielded the corresponding networked polymers with much higher T_gs than those of all of the aforementioned networked polymers. This implied that efficient use of the hexafunctional monomer leads to the formation of more densely crosslinked polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1524–1529     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

RAFT‐approach to well‐defined telechelic vinyl polymers with hydroxyl terminals as polymeric diol‐type building blocks for polyurethanes

A new trithiocarbonate 1 bearing two hydroxyl moieties was synthesized and employed as a RAFT agent for radical polymerization of vinyl monomers. 1 mediated RAFT polymerizations of styrene and ethyl acrylate to give the corresponding polymers with predictable molecular weights and narrow molecular weight distributions. Structural analyses of the polymers with NMR and MALDI‐TOF mass techniques revealed that they were telechelic ones, of which both chain ends were endowed with hydroxyl groups inherited from trithiocarbonate 1 . Usefulness of these telechelic polymers as polymeric diol‐type building blocks was demonstrated in their polyaddition with diisocyanates, which gave the corresponding polyurethanes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Sugar‐based hydrophilic polyurethanes and polyureas

Novel linear homogeneous polyurethanes and polyureas with enhanced hydrophilic character have been successfully prepared from sugar‐based monomers having their hydroxyl groups free or partially protected. By the reaction of primary hydroxyl groups of xylitol with dimethyl hexamethylene dicarbamate (HMDC) or di‐tert‐butyl‐4,4′‐diphenyl methyl dicarbamate (MDC), two new linear semicrystalline polyurethanes [PU(X‐HMDC) and PU(X‐MDC)] have been prepared. Likewise, by the reaction of xylitol with the analogous diisocyanates hexamethylene diisocyanate (HMDI) or 4,4′‐methylenebis(phenyl isocyanate) (MDI), similar polyurethanes [PU(X‐HMDI) and PU(X‐MDI)] were obtained. However, these latter polyurethanes present some degree of crosslinking because of the higher reactivity of the diisocyanate comonomers. Linear hydrophilic polyureas having free hydroxyl groups joined to the main chain have also been prepared by the reaction of the same diisocyanates (HMDI and MDI) with 1,6‐diamino‐1,6‐dideoxy‐D ‐mannitol and 1,6‐diamino‐1,6‐dideoxy‐3:4‐O‐isopropylidene‐D ‐mannitol. As far as we are aware, this kind of polyhydroxylated polyurea has not been previously described in the literature. The new polymers were characterized by standard methods (elemental analyses, gel permeation chromatography, IR, and NMR). The polyurethanes were hydrolytically degradable under physiological conditions, in contrast with less‐hydrophilic linear polyurethanes previously described. The thermal properties of the novel polymers were investigated by thermogravimetric analysis and differential scanning calorimetry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thiol–ene polymerizations using imide‐based monomers

New diene and dithiol monomers, based on aromatic imides such as benzophenone‐3,3′,4,4′‐tetracarboxylic diimide were synthesized and used in thiol‐ene polymerizations which yield poly(imide‐co‐thioether)s. These linear polymers exhibit limited solubility in various organic solvents. The molecular weights of the polymers were found to decrease with increasing imide content. The glass transition temperature (T_g) of these polymers is dependent on imide content, with T_g values ranging from ?55 °C (with no imide) up to 13 °C (with 70% imide). These thermal property improvements are due to the H‐bonding and rigidity of the aromatic imide moieties. Thermal degradation, as studied by thermogravimetric analysis, was not significantly different to the nonimide containing thiol‐ene polymers made using trimethyloylpropane diallyl ether and 3,5‐dioxa‐1,8‐dithiooctane. It is expected that such monomers may lead to increased glass transition temperatures in other thiol‐ene polymer systems as these normally exhibit low glass transition temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4637–4642     

Poly(ester urethane)s derived from lactide,isosorbide, terephthalic acid,and various diisocyanates

Isosorbide‐initiated oligomerizations of l ‐lactide were preformed in bulk using SnCl₂ as catalyst. The resulting telechelic OH‐terminated oligoesters were in situ subjected to simultaneous polycondensation and polyaddition with mixtures of terephthaloyl chloride and diisocyanates. Most polymerizations were conducted with 4,4′‐diisocyanatodiphenyl methane and 2,4‐diisocyanato toluene. The consequences of excess diisocyanate and four different catalysts were studied. The isosorbide/lactide ratio and the terephthalic acid/diisocyanate ratio were varied. Number average molecular weights up to 15 kDa with polydispersities around 3–5 were obtained. Depending on the chemical structure of the copolyester and on the feed ratio, incorporation of urethane groups may reduce or enhance the glass‐transition temperature, but the thermal stability decreases dramatically regardless of composition. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 867–875     

Thermally latent polyaddition and curing of Di‐ and tri‐functional hemiacetal esters with diepoxide by salen‐zinc complex with tunable catalytic activity and model and networking reactions

Salen‐zinc complexes (Zn/ 1 _R ) thermal‐latently catalyzed the polyaddition of a diepoxide ( 2 ) with a difunctional hemiacetal ester ( 3 ), which proceeded at moderate temperatures (100–150 °C) for curing of mixtures containing monomers and initiators. The catalytic activities of Zn/ 1 _R depended on the Lewis acidities of the complexes controlled by the electronic character of the salen ligands. For example, Zn/ 1 _3,5‐Cl bearing four electron‐withdrawing chlorine atoms initiated the polyaddition at the lowest temperature (100 °C), and Zn/ 1 _OMe bearing two electron‐donating methoxy groups initiated the polyaddition at 120 °C. The Lewis acidities of the complexes were evaluated by NMR and IR spectroscopies and computational calculation. The polyadditions with the salen‐zinc complexes proceeded quantitatively at 150 °C, and the use of a tri‐functional hemiacetal ester ( 7 ) with 2 afforded the corresponding networked polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1427–1439, 2008     

Mechanistic aspects on molecular structure formation of polymeric networks from diisocyanates with amidine compounds

Polymeric networks are produced by step‐growth polyaddition and co‐polyaddition reactions of 1‐ethylimidazoline in combination with various diisocyanates. Five aromatic, two aliphatic diisocyanates and a polyurethane prepolymer are used as particular reactant in N,N‐dimethylformamide as solvent at room temperature. Obviously, 1‐ethylimidazoline can serve as trifunctional monomer, which enables a crosslinking reaction with diisocyanates. Molecular structure elements of the polymeric networks were studied by solid state 13C‐NMR spectroscopy revealing that detailed molecular structure formations are determined whether aromatic or aliphatic diisocyanates are used. Quantum chemical calculations were used as supporting method to elucidate the complex reaction cascades. Hence, it can be shown that beside 3:1 stoichiometric structures 2:1 based structures are formed as well. These structures are observed as kinetically controlled products only when aromatic diisocyanate monomers are used. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 977–985     

Synthesis and property of polyoxazolidone having fluorene moiety by polyaddition of diisocyanate and diepoxide

Polyoxazolidones having fluorenyl group were synthesized by polyaddition of 9,9‐diglycidyl fluorene with various diisocyanates. The polymer from 9,9‐diglycidyl fluorene and methylenediphenyl 4,4′‐diisocyanate was afforded in high yield although polydispersity of the polymer was found relatively broad. The IR spectrum of the obtained polymer showed two absorption in carbonyl region. One of them was assigned to the expected oxazolidone, while the other at 1710 cm^?1 appeared due to a carbonyl group of the isocyanurate moieties produced by cyclotrimerization of isocyanate. It is assumed that the cyclotrimerization would cause the broad polydispersity caused by the branched structure formed by isocyanurate. The polymers obtained with three kinds of diisocyanates (methylenediphenyl 4,4'‐diisocyanate, 1,6‐hexamethylene diisocyanate, 1,4‐phenylene diisocyanate) showed high thermal stability, as their T_d10 was depended on the structure of diisocyanate. All polymers had high transparency in a visible region. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1755–1760     

Cyclotrimerization of diisocyanates toward high‐performance networked polymers with rigid isocyanurate structure: Combination of aromatic and aliphatic diisocyanates for tunable flexibility

A series of networked polymers bearing isocyanurate moiety was synthesized by cyclotrimerization of diisocyanates, with employing methylenediphenyl 4,4′‐diisocyanate and 1,6‐hexamethylenediisocyanate (HMDI) in several feed ratios. In spite of the large difference in intrinsic reactivity between these two diisocyanates, their coannulation proceeded efficiently by using sodium p‐toluenesulfinate (pTolSO₂Na) and 1,3‐dimethyl‐2‐imidazolidinone as a catalyst and a solvent, respectively. The resulting networked polymers were transparent and exhibited excellent thermal stability. In addition, HMDI‐rich feed ratios allowed for the formation of networked polymers with increased flexibility. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2631–2637     

Synthesis and properties of bio‐based polyurethanes bearing hydroxy groups derived from alditols

Four kinds of bio‐based polyurethanes bearing hydroxy groups in the pendants were synthesized by the polyaddition of D ‐mannitol‐ and D,L ‐erythritol‐derived diols (1,2:5,6‐di‐O‐isopropylidene‐D ‐mannitol and 1,2‐O‐isopropylidene‐D,L ‐erythritol) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and the subsequent deprotection of the isopropylidene groups. They were hydrolyzed much more quickly than the corresponding protected polyurethanes at 50 °C and pH 7.0, although their hydrolytic degradation rate was lower than that of polyurethanes with saccharic and glucuronic lactone groups, which had been reported in our previous articles. The introduction of D ‐mannitol units to the polyether‐polyurethanes containing poly(oxytetramethylene) glycol units also enhanced their hydrolyzibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Conformationally restricted linear polyurethanes from acetalized sugar‐based monomers

Linear polyurethanes based on sugar monomers having D ‐gluco, galacto, and D ‐manno configurations and their secondary hydroxyl groups protected as bicyclic acetals, have been prepared by polyaddition reaction of these diol monomers to hexamethylene diisocyanate ( HMDI ) and 4,4′‐methylene‐bis(phenyl isocyanate) ( MDI ). The new polyurethanes seem to be amorphous materials, except that obtained from 2,3:4,5‐di‐O‐methylene‐galactitol and HMDI. Weight‐average molecular weights, determined by GPC, were in the range 16,000–115,200. TGA analyses indicated that the thermal stability of these bicyclic polyurethanes is comparable to those based on the isosorbide; both the onset and the maximum rate decomposition temperatures increased significantly with respect to the polyurethanes based on acyclic sugar monomers. The presence of the acetalized alditol units in the polyurethanes also increased the T_gs as compared with their acyclic analogs. Deacetalization of the polyurethanes containing di‐O‐isopropylidene‐D ‐mannitol units yielded the polyhydroxylated polymers in good yields, without apparent degradation of the polymer chain. These hydroxylated polymers showed an enhanced hydrophilicity and degradability and lower T_gs and thermal stability than their parent acetalized polyurethanes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of new hydroxyl‐pendant aromatic polyimides derived from trimethylsilylated 4,4′‐diamino‐3,3′‐dihydroxybiphenyl and aromatic tetracarboxylic dianhydrides

New phenolic hydroxyl‐pendant aromatic polyimides were synthesized with the N‐silylated diamine method in two steps: the ring‐opening polyaddition of tetrakis(trimethylsilyl)‐substituted 4,4′‐diamino‐3,3′‐dihydroxybiphenyl to various aromatic tetracarboxylic dianhydrides, giving trimethylsiloxy‐pendant poly(amic acid) trimethylsilyl esters, and thermal imidization. The hydroxyl‐bearing polyimides were amorphous but insoluble in organic solvents. They had glass‐transition temperatures greater than 370 °C and temperatures of 10% weight loss greater than 415 °C in nitrogen. The hydroxyl‐pendant polypyromellitimide film had a high tensile strength and a high modulus of 310 MPa and 10 GPa, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1790–1795, 2002     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

Thiourethane‐based thiol‐ene high Tg networks: Preparation,thermal, mechanical,and physical properties

Thiourethane‐based thiol‐ene (TUTE) films were prepared from diisocyanates, tetrafunctional thiols and trienes. The incorporation of thiourethane linkages into the thiol‐ene networks results in TUTE films with high glass transition temperatures. Increases of T_g were achieved by aging at room temperature and annealing the UV cured films at 85 °C. The aged/annealed film with thiol prepared from isophorone diisocyanate and cured with a 10,080‐mJ/cm² radiant exposure had the highest DMA‐based glass transition temperature (108 °C) and a tan δ peak with a full width at half maximum (FWHM) of 22 °C, indicating a very uniform matrix structure. All of the initially prepared TUTE films exhibited good physical and mechanical properties based on pencil hardness, pendulum hardness, impact, and bending tests. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5103–5111, 2007     

Polymerization of an epoxy‐containing silacyclobutane and its application to networked polymer synthesis

Polymerization of a silacyclobutane having an epoxy moiety and its application to networked polymer synthesis were examined. Four‐membered ring‐opening polymerization of silacyclobutane having a 3,4‐epoxybutyl group on the silicon atom (OBMSB) was achieved by using a platinum vinyldisiloxane complex with keeping the epoxy ring unchanged. Copolymerization of 1,1‐diethylsilacyclobutane (DESB) with OBMSB by using the same catalyst effectively gave the corresponding copolymers [poly(DESB‐co‐OBMSB)]. Thermal properties of the polyOBMSB, polyDESB, and poly(DESB‐co‐OBMSB) were investigated by DSC and TGA. Cast films of the obtained polymers with 1‐naphthylmethylmethyl‐p‐hydroxyphenylsulfonium hexafluoroantimonate, a small amount of thermally latent acid generator were prepared. Heating the films at 80 °C for 2 h gave crosslinked networked polycarbosilanes through cationic ring‐opening of the epoxy moieties. Thermal and mechanical properties of the networked polymers were investigated by TGA, DSC, and tensile strength measurements. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3400–3405