Low glass transition temperature polymer electrolyte prepared from ionic liquid grafted polyethylene oxide

In this contribution, we report a new type of poly (ionic liquids) prepared by imidazolium ionic liquids directly grafting onto polyethylene oxide backbone. Different molecular weights of poly (ionic liquids) are obtained with a low glass transition temperature up to ?14 °C. The materials as polymer electrolyte achieve a high conductivity around 10^?5 S cm^?1 at 30 °C and close to 10^?3 S cm^?1 at 90 °C. High viscosity up to 4000 Pa s at room temperature would minimize the electrolytes leaking in electrochemical devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2104–2110     

A novel polymer gel electrolyte: Direct polymerization of ionic liquid from surface of silica nanoparticles

A novel polymer electrolyte is synthesized by directly grafting poly ionic liquids onto silica nanoparticles. The kinetic study of this surface‐initiated polymerization has also been included. A gel‐state electrolyte is formed by mixing this type of polymer/silica nanocomposite with ionic liquids under 60 °C, which exhibits an excellent conductivity of 0.8 mS/cm at room temperature and 14.7 mS/cm at 90 °C. In addition, the mechanism of gel formation has also been discussed in this article. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 121–127     

Influence of different alkyl‐methylimidazolium tetrafluoroborate ionic liquids on the structure of pebax® films. Consequences on thermal,mechanical, and water sorption and diffusion properties

In this work, three ionic liquids (ILs) differing by the length of the alkyl chain linked to their cation were incorporated in a Pebax^® copolymer matrix through a solvent cast process for composition from 0 to 70 wt % IL. The copolymer/IL miscibility was investigated via IR Spectroscopy, Differential Scanning Calorimetry and Scanning Electron Microscopy. The three ILs dissolved in the copolymer soft phase for ILs content below 30 wt % whereas they formed segregated dispersed domains at higher loadings. The plasticizing effect of the ILs was examined through DSC and thermomechanical analyses. In the range of IL amount from 0 to 30 wt %, no significant differences were observed in the thermomechanical properties as a function of the IL structure. At higher IL content, the films based on 1‐ethyl‐methylimidazolium tetrafluoroborate sustained better properties. All films exhibited a good thermal stability up to 300 °C. The water sorption isotherms were modeled with GAB equation and both the kinetic and thermodynamic parameters of the sorption mechanism were investigated. A non‐monotonic evolution of the GAB parameters and diffusion coefficient as a function of the IL content was evidenced. Moreover, different behaviors were observed as a function of the IL nature and structuration within the copolymer matrix. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 811–824     

Kinetics and mechanistic investigation of epoxy–anhydride compositions cured with quaternary phosphonium salts as accelerators

Mechanism and curing kinetics of bisphenol A epoxy resin–iso‐methyltetrahydrophthalic anhydride compositions using quaternary phosphonium salts as accelerators were investigated by differential scanning calorimetry (DSC) and electrospray mass‐spectrometry (ESI‐MS). The DSC method was applied to investigate curing kinetics and apparent activation energy values for the overall curing process. The DSC results showed that some of the phosphonium salts lead to a lower activation energy, that means they are more effective accelerators for the curing of epoxy–anhydride systems. The mechanism of curing was studied by ESI‐MS using the model reaction of epichlorohydrin (E) with phthalic anhydride (PA) in the presence of phosphonium salts or 2‐methylimidazole. Products containing the alkyl moiety of the phosphonium salt in form of alkyl esters could be identified. This suggests that the phosphonium salts activate the anhydride by electrophilic attack. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1088–1097     

Imidazolium ionic liquids with short polyoxyethylene chains

It has been observed by us earlier that imidazolium ionic liquids ([bmim][BF₄] react with paraformaldehyde giving in nearly quantitative yield imidazolium ionic liquids substituted at 2‐position with hydroxymethyl group ([bhmim][BF₄]). In this article, we describe the application of those ionic liquids (after converting hydroxyl group into alkoxide anion by reaction with sodium hydride) as initiators for anionic polymerization of ethylene oxide (EO). Up to DP_n ～ 30 polymerization proceeds without side reactions, and the product is exclusively low‐molecular‐weight polyoxyethylene containing imidazolium head group (POE‐IL) with DP_n equal to [EO]/[bhmim] ratio. By increasing [EO]/[bhmim] ratio further, side reaction start to interfere, and macromolecules that does not contain imidazolium head groups are also formed, as evidenced by analysis of MALDI TOF spectra. Blending of POE‐IL with high‐molecular‐weight POE leads to significant reduction of crystallinity of POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6961–6968, 2008     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Ionic aggregation in random copolymers containing phosphonium ionic liquid monomers

Copolymers of n‐butyl acrylate and phosphonium ionic liquid monomers possessing various alkyl substituents and counterions were synthesized through a combination of conventional free radical copolymerization and anion exchange. Differential scanning calorimetry and dynamic mechanical analysis provided the thermal and mechanical properties of these phosphonium cation‐containing random copolymers. Factors including alkyl chain length of phosphonium substituents, counterion type, as well as ionic concentration significantly influenced the association of phosphonium cations. Phosphonium ionomers with trialkyl substituents on phosphonium cations did not display the characteristic small‐angle X‐ray scattering peak, suggesting the absence of ionic clusters. However, low q peaks in wide‐angle X‐ray diffraction was indicative of significant concentration fluctuations wherein the ionic monomeric units associated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyaddition of bifunctional cyclic carbonate with diamine in ionic liquids: In situ ion composite formation and simple separation of ionic liquid

Polyaddition of bifunctional cyclic carbonates and diamines in ionic liquids proceeded smoothly to afford polyurethanes having hydroxyl groups in the side chain (i.e., poly(hydroxyurethane)). The reaction mixtures separated into ionic liquids and ionic composites consisting of poly(hydroxyurethane) and ionic liquids. The ionic composites originated from the interactions between hydroxyl groups in the side chains and the ionic liquids, confirmed by IR spectroscopic analysis. When the polyaddition was conducted in the mixed solvent consists of water and N‐n‐butylimidazolium hexafluorophosphate. After the reaction, the polymer and the ionic liquid could be separated easily. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4629–4635, 2009     

Propagation kinetics of free‐radical polymerizations in ionic liquids

Propagation rate coefficients, k_p, of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) homopolymerizations were measured at ambient pressure in four ionic liquids (ILs): 1‐ethyl‐3‐methylimidazolium ([emim]) ethyl sulfate and [emim] hexyl sulfate as well as butyl‐3‐methylimidazolium ([bmim]) hexafluorophosphate and [bmim] tetrafluoroborate via the pulsed‐laser polymerization size‐exclusion chromatography technique. In passing from bulk polymerization at 40 °C polymerization in IL solution containing 20 vol % monomer, k_p is enhanced by up to a factor of 4 with MMA and by a factor of 2 with GMA. This enhancement of k_p primarily results from a lowering of activation energy upon partial replacement of monomer by ionic liquid species. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1460–1469, 2008     

Cationic polymerization of a novel oxetane‐bearing ionic liquid structure and properties of the obtained poly(ionic liquid)

An ionic liquid, 1‐ethyl‐3‐(3‐ethyl‐3‐oxetanylmethyl)imidazolium bis(trifluoromethanesulfonyl)imide (OXImTFSI), was synthesized, and its cationic polymerization was examined. The heating of a mixture of 1‐ethylimidazole and 3‐chloromethyl‐3‐ethyloxetane at 90 °C for 48 h yielded 1‐ethyl‐3‐(3‐ethyl‐3‐oxetanylmethyl)imidazolium chloride, which was transformed to a room‐temperature ionic liquid, OXImTFSI, by ion exchange with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). This ionic liquid was polymerized using boron trifluoride ethyl ether complex as a catalyst to give polyOXImTFSI. Five percent weight loss temperature (T_d5) of polyOXImTFSI evaluated by thermal gravimetric analysis was 409 °C, indicating the high thermal stability. Glass transition temperature (T_g) of the polymer evaluated by differential scanning calorimetry was ?19 °C, indicating the high flexibility of the material. Ionic conductivity of polyOXImTFSI was determined to be 1.86 × 10^?8 S/cm at 23 °C, which was far lower than that of the OXImTFSI monomer (5.05 × 10^?4 S/cm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2986–2990     

Living/controlled radical copolymerization of N‐substituted maleimides with styrene in 1‐butyl‐3‐methylimidazolium hexafluorophosphate and anisole

The atom transfer radical copolymerization of N‐substituted maleimides such as N‐phenylmaleimide (PhMI), N‐cyclohexylmaleimide (ChMI), and N‐butylmaleimide (NBMI) with styrene initiated with dendritic polyarylether 2‐bromoisobutyrates in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), at room temperature and anisole at 110 °C was investigated. The dendritic‐linear block copolymers obtained in ionic liquid possessed well‐defined molecular weight and low polydispersity (1.05 < M_w/M_n < 1.32) and could be used as a macroinitiator for chain‐extension polymerization, suggesting the living nature of the reaction system. The ionic liquids containing catalyst could be recycled in the atom transfer radical polymerization systems without further treatment. Compared with polymerization conducted in anisole, the polymerization in ionic liquid had a stronger tendency for alternation. The tendency for alternation decreased in the order PhMI > NBMI > ChMI in [bmim][PF₆] and PhMI > ChMI > NBMI in anisole. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2156–2165, 2003     

Adding magnetic ionic liquid monomers to the emulsion polymerization tool‐box: Towards polymer latexes and coatings with new properties

Magnetic ionic liquid monomers were synthesized and then polymerized to get magnetic polymer latexes and films. First, a series of 1‐vinyl‐3‐dodecyl‐imidazolium monomers having metal halides counter‐anions such as FeCl₃Br^?, CoCl₂Br^?, and MnCl₂Br^? were synthesized. These ionic liquid monomers were first homopolymerized to lead to magnetic poly(ionic liquids) and characterized. Secondly, magnetic latexes were synthesized by using the magnetic ionic liquids as surfmers (surfactant + monomer) in the emulsion polymerization of methyl methacrylate/n‐butyl acrylate. It was found that the powders obtained by freeze‐drying the latexes presented a paramagnetic behavior with weak antiferromagnetic interactions between the adjacent metal ions. Although the ratio of magnetic ionic liquid/monomer was only 2% these poly(methyl methacrylate‐co‐butyl acrylate) powders and latexes responded to a magnetic field due to the surfmer paramagnetic nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1145–1152     

Flame‐retardant epoxy resins from o‐cresol novolac epoxy cured with a phosphorus‐containing aralkyl novolac

A novel phosphorus‐containing aralkyl novolac (Ar‐DOPO‐N) was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) first with terephthaldicarboxaldehyde and subsequently with phenol. The chemical structures of the synthesized compounds were characterized with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. Ar‐DOPO‐N blended with phenol formaldehyde novolac was used as a curing agent for o‐cresol formaldehyde novolac epoxy, resulting in cured epoxy resins with various phosphorus contents. The epoxy resins exhibited high glass‐transition temperatures (159–177 °C), good thermal stability (>320 °C), and retardation on thermal degradation rates. High char yields and high limited oxygen indices (26–32.5) were observed, indicating the resins' good flame retardance. Using a melamine‐modified phenol formaldehyde novolac to replace phenol formaldehyde novolac in the curing composition further enhanced the cured epoxy resins' glass‐transition temperatures (160–186 °C) and limited oxygen index values (28–33.5). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2329–2339, 2002     

Photopolymerization of coordinated ionic liquid monomers: Realizing the benefits of structured media using only common reagents

Here, we provide a detailed report on a new type of structured media for improving photopolymerizations: coordinated ionic liquids (ILs). Coordinated ILs are readily formed from the bistriflimide ([Tf₂N]^?) anion and coordination complexes composed of Li⁺ cations with polar organic monomers without an additional cosolvent. Photopolymerization kinetics and monomer conversion were monitored in real time using attenuated total reflectance Fourier transform infrared spectroscopy and the material properties of the products were examined using gel permeation chromatography and differential scanning calorimetry. Generally, coordinated IL monomers displayed improved reaction kinetics at both high and low salt concentrations as well as distinct product properties. The noncovalent (and reversible) interactions between monomer and salt in coordinated ILs hold promise as an efficient and versatile form of structured media for photopolymerizations. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2004–2014     

Ionic IPNs as novel candidates for highly conductive solid polymer electrolytes

Five ionic imidazolium based monomers, namely 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethylsulfonyl)imide (ILM1), 1‐vinyl‐3‐(diethoxyphosphinyl)‐propylimidazolium bis(trifluoromethylsulfonyl)imide (ILM2), 1‐[2‐(2‐methyl‐acryloyloxy)‐propyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM3), 1‐[2‐(2‐methyl‐acryloyloxy)‐undecyl]‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (ILM4), 1‐vinyl‐3‐ethylimidazolium dicyanamide (ILM5) were prepared and used for the synthesis of linear polymeric ionic liquids (PILs), crosslinked networks with polyethyleneglycol dimethacrylate (PEGDM) and interpenetrating polymer networks (IPNs) based on polybutadiene (PB). The ionic conductivities of IPNs prepared using an in situ strategy were found to depend on the ILM nature, T_g and the ratio of the other components. Novel ionic IPNs are characterized by increased flexibility, small swelling ability in ionic liquids (ILs) along with high conductivity and preservation of mechanical stability even in a swollen state. The maximum conductivity for a pure IPN was equal to 3.6 × 10^?5 S/cm at 20 °C while for IPN swollen in [1‐Me‐3‐Etim] (CN)₂N σ reached 8.5 × 10^?3 S/cm at 20 °C or 1.4 × 10^?2 S/cm at 50 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4245–4266, 2009     

Preparation of a solution‐processable,nanostructured ionic polyacetylene

Polymerization of a self‐assembled 1‐dodecyl‐3‐propargylimidazolium bromide ionic liquid (IL) yields a nanostructured ionic polyacetylene. A 1:1 aqueous mixture of the amphiphilic IL produces an ordered lyotropic mesophase that adopts a hexagonal perforated lamellar structure. Rh (I)‐mediated polymerization of the assembled mixture yields a hexagonal modulated lamellar structured polymer. FTIR spectroscopy reveals that the polymer was self n‐doped. The polymer was fractioned into three components with the majority product, possessing an intermediate molecular weight that is soluble in polar organic solvents. In methanol, the optical band gap of the main fraction was determined to be 2.38 eV and was nonemissive. The solution‐processable polymer was airbrush sprayed onto glass substrates to give a liquid‐crystalline, lamellar structured semiconductive film (7.02 × 10^?5 S cm^?1). The polymer resisted oxidation (degradation) upon storage in air as monitored by vibrational spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1215–1227     

Chemical and thermal stability of N‐heterocyclic ionic liquids in catalytic C–H activation reactions

¹H‐NMR spectrum analyses are applied to study the chemical and thermal stability of selected N‐heterocyclic ionic liquids within the reaction system that can highly efficiently activate a C–H bond of methane and convert it into the C–O bond in methanol. Our results indicate that under such reaction conditions involving using a powerful Pt‐based catalyst and strong acidic solvent, the aromatic ring of an imidazolium cation becomes unstable generating an ammonium ion (NH₄⁺). Our results also suggest that the instability of the imidazolium ring is more chemically (participation in reactions) than thermally based. Modifications of the aromatic ring structure such as pyrazolium and triazolium cations can increase the chemical/thermal stability of ionic liquids under these reaction conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐Tg and low‐dielectric epoxy thermosets based on a propargyl ether‐containing phosphinated benzoxazine

A propargyl ether‐containing benzoxazine (4) was prepared from a potassium carbonate‐catalyzed nucleophilic substitution of propargyl bromide and a phenolic OH‐containing benzoxazine (3) , which was prepared from 1‐(4‐hydroxyphenyl)‐1‐(4‐aminophenyl)‐1‐(6‐oxido‐6H ‐dibenz <c,e><1,2> oxaphosphorin‐6‐yl)ethane (1) by a three‐step procedure. The curing reactions of (4) were monitored by IR and DSC. A reaction mechanism was proposed based on the observation. Benzoxazines (3) and (4) were applied as epoxy curing agents. The microstructure and the structure‐property relationship of the resulting thermosets are discussed. The double‐strand structure in (4) ‐cured epoxy thermosets afforded higher crosslinking density, and led to higher thermal properties. In addition, the (4) ‐cured epoxy thermosets possess half the amount of highly polar hydroxyl groups than those of the (3) ‐cured epoxy thermosets, resulting in a lower dielectric constant, dissipation factor, and water absorption. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1359–1367     

Influence of the film‐forming process on the nanostructuration of Pebax®/1‐ethyl‐3‐methylimidazolium triflate ionic liquid: Consequences on the thermal,mechanical, gas,and water transport properties

1‐Ethyl‐3‐methylimidazolium triflate ionic liquid (IL) was incorporated in Pebax® MV 3000 copolymer through solvent cast (SC) or melt blending (MB) for composition from 0 to 30 wt % IL. The morphology was investigated by small angle neutron scattering, transmission electron microscopy, and differential scanning calorimetry. The SC copolymer film exhibited a lower mean correlation distance (D = 87 Å) and smoother transition between the rigid and soft phases in comparison with the MB film (D = 103 Å). By dissolving in the copolymer soft phase, IL acted as a plasticizer, impeded soft segments crystallization and led to linear increase of D. The differences observed in morphology as a function of the film process impacted the mechanical and gas transport properties: below 20 wt % IL, all SC films sustained thermomechanical properties up to 120 °C and exhibited lower permeability than MB films. IL adding made permeability decrease up to 60%, depending on the gas nature and IL amount. Hydration of the films was investigated by sorption and SANS analyses. The impact of water uptake on swelling was similar for all membranes whereas water diffusion depended on the film morphologies and IL amount. Interesting mechanical and transport properties were obtained for IL content up to 20 wt %. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 778–788     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003