Surface‐enhanced Raman scattering from gold‐coated germanium oxide nanowires

We utilized bulk‐synthesized nanowires (NWs) of germanium dioxide as nanoscale structures that can be coated with noble metals to allow the excitation of surface plasmons over a broad frequency range. The NWs were synthesized on substrates of silicon using gold‐catalyst‐assisted vapor–liquid–solid (VLS) growth mechanism in a simple quartz tube furnace setup. The resulting NWs have diameters of ∼100–200 nm, with lengths averaging ∼10–40 µm and randomly distributed on the substrate. The NWs are subsequently coated with thin films of gold, which provide a surface‐plasmon‐active surface. Surface‐enhanced Raman scattering (SERS) studies with near‐infrared (NIR) excitation at 785 nm show significant enhancement (average enhancement > 10⁶) with good uniformity to detect submonolayer concentrations of 4‐methylbenzenethiol (4‐MBT), trans‐1,2‐bis(4‐pyridyl)ethylene (BPE), and 1,2‐benzendithiol (1,2‐BDT) probe molecules. We also observed an intense, broad continuum in the Raman spectrum of NWs after metal coating, which tended to diminish with the analyte monolayer formation. Copyright © 2008 John Wiley & Sons, Ltd.     

Ion‐Beam Sculpting of Nanowires

Nanomaterials often undergo unusual mechanical deformations compared to their bulk counterparts when irradiated with ion‐beams. This study visualizes and investigates some of the unusual interactions that can occur in nanomaterials during irradiation with medium‐energy ion‐beams using a helium‐ion microscope (HIM). Ion‐beam sculpting of semiconductor nanowires (NWs) with sub‐10 nm features is demonstrated. Moreover, irradiation‐induced growth of NWs at room‐temperature is discovered. The new concept and possible mechanism of irradiation‐induced VLS (vapor–liquid–solid) growth of NWs is introduced. These results are the basis for further fundamental and technological developments toward manipulation and visualization of ion–matter interactions at the nanoscale.     

Template‐Free Fabrication of Mesoporous Hollow ZnMn2O4 Sub‐microspheres with Enhanced Lithium Storage Capability towards High‐Performance Li‐Ion Batteries

In this work, we rationally designed an efficient template‐free synthetic strategy to fabricate hierarchical mesoporous hollow ZnMn₂O₄ sub‐microspheres (HZSMs) constructed entirely from nanoparticle (NP) building blocks of size ≈15 nm. The well‐known inside‐out Ostwald ripening process was tentatively proposed to shed light on the formation mechanism of the mesoporous hollow nano‐/microarchitecture. In favor of the intrinsic structural advantages, these resulting HZSMs exhibited superior electrochemical lithium‐storage performance with high specific capacity, excellent cyclability, and good rate capability when evaluated as an anode material for advanced Li‐ion batteries (LIBs). The excellent electrochemical performance should be reasonably ascribed to the porous and hollow structure of the unique HZSMs with nanoscale subunits, which reduced the diffusion length for Li⁺ ions, improved the kinetic process and enhanced the structural integrity with sufficient void space for tolerating the volume variation during the Li⁺ insertion/extraction. These results further revealed that the as‐prepared mesoporous HZSMs would be a promising anode for high‐performance LIBs.     

Tip‐enhanced Raman spectroscopy using single‐crystalline Ag nanowire as tip

We report the surface‐enhanced Raman scattering (SERS) effect from the apex of single‐crystalline Ag nanowires (NWs). We also fabricated tip‐enhanced Raman spectroscopy (TERS) tips by attaching individual Ag NWs to W wires by using the alternating current dielectrophoresis (AC‐DEP) method. The single‐crystalline Ag NW tips could overcome many of the shortcomings of conventional TERS tips. Most importantly, the results obtained from TERS using single‐crystalline metal NWs are very reproducible, and the tips are also reusable. This development represents a significant progress in making TERS a reliable optical characterization technique with nanometer spatial resolution. Copyright © 2010 John Wiley & Sons, Ltd.     

Controllable Formation of Niobium Nitride/Nitrogen‐Doped Graphene Nanocomposites as Anode Materials for Lithium‐Ion Capacitors

Niobium nitride/nitrogen‐doped graphene nanosheet hybrid materials are prepared by a simple hydrothermal method combined with ammonia annealing and their electrochemical performance is reported. It is found by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the as‐obtained niobium nitride nanoparticles are about 10–15 nm in size and homogeneously anchored on graphene. A non‐aqueous lithium‐ion capacitor is fabricated with an optimized mass loading of activated carbon cathode and the niobium nitride/nitrogen‐doped graphene nanosheet anode, which delivers high energy densities of 122.7–98.4 W h kg^?1 at power densities of 100–2000 W kg^?1, respectively. The capacity retention is 81.7% after 1000 cycles at a current density of 500 mA g^?1. The high energy and power of this hybrid capacitor bridges the gap between conventional high specific energy lithium‐ion batteries and high specific power electrochemical capacitors, which holds great potential applications in energy storage for hybrid electric vehicles.     

Plasmon‐enhanced Raman scattering of coaxial hybrid nanowires made with light‐emitting polymer and gold

We report on the plasmon‐enhanced Raman scattering of coaxial hybrid nanowires (NWs) made with light emitting poly(3‐methylthiophene) (P3MT) and gold (Au) core or coating. Absorption spectra of coaxial hybrid NWs showed the absorption peaks because of localized surface plasmon (SP) excitation at ~ 567 and ~ 610 nm, in addition to the π–π* transition peaks of P3MT. Raman spectra of a single strand of coaxial hybrid NW and plain P3MT NW was obtained by using three different wavelengths of laser excitation of 514, 633, and 785 nm. We found that Raman intensities of hybrid coaxial NWs were enhanced by 4 to 15 times over those of plain P3MT NWs with the Raman excitation wavelengths close to the observed SP energies of coaxial NWs. We attributed the observed enhancement of the Raman signal to the resonance of the incident laser with the matching SP energies, rather than the possible doping level change, in hybrid coaxial NWs. Copyright © 2012 John Wiley & Sons, Ltd.     

Critical diameters and temperature domains for MBE growth of III–V nanowires on lattice mismatched substrates

We report on the growth properties of InAs, InP and GaAs nanowires (NWs) on different lattice mismatched substrates, in particular, on Si(111), during Au‐assisted molecular beam epitaxy (MBE). We show that the critical diameter for the epitaxial growth of dislocation‐free III–V NWs decreases as the lattice mismatch increases and equals 24 nm for InAs NWs on Si(111), 39 nm for InP NWs on Si(111), 44 nm for InAs NWs on GaAs(111)B, and 110 nm for GaAs NWs on Si(111). When the diameters exceed these critical values, the NWs are dislocated or do not grow at all. The corresponding temperature domains for NW growth extend from 320 °C to 340 °C for InAs NWs on Si(111), 330 °C to 360 °C for InP NWs on Si(111), 370 °C to 420 °C for InAs NWs on GaAs(111)B and 380 °C to 540 °C for GaAs NWs on Si(111). Experimental values for critical diameters are compared to the previous findings and are discussed within the frame of a theoretical model. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Trapped charge‐induced pyroelectric‐like transient response in single high‐resistivity Sb2Se3 nanowires

Dynamic scanning photocurrent microscopy was applied to Sb₂Se₃ crystalline single nanowires (NWs) to analyze their transient photocurrent responses. These NWs exhibited switching behavior with rapid rise and decay times upon illumination by laser pulses. The estimated spectral responsivity and external quantum efficiency for a freshly‐prepared NW at a bias voltage of 0.3 V and excitation wavelength of 488 nm were ～16.9 mA/W and ～42.9%, respectively. A pyroelectric‐like current transient was observed with reduced spectral responsivity when nonpolar Sb₂Se₃ single‐crystalline NWs were excited by laser pulses. Because Sb₂Se₃ NWs were nonpyroelectric or ferroelectric, the pyroelectric‐like current could possibly be attributed to temperature dependent nonlinear space‐charge distributions. Defects produced by the external electrical bias generated and re‐distributed space charges in the NWs. As a result, the temperature dependent inhomogeneous electric field led to nonlinear expansions or contractions of the lattice (electrostriction) that can produce pyroelectric current. We obtained a lower bound of equivalent pyroelectric coefficient α ≥ 60.09 μC/m² K from these materials by fitting the electrical transients. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Electrochemical synthesis of polyaniline nanowires on Pt interdigitated microelectrode for room temperature NH3 gas sensor application

In this work, we have successfully developed a facile and effective electrochemical route for directly growing polyaniline (PANI) nanowires (NWs) on platinum interdigitated microelectrode. The as-prepared NWs were characterized by field-emission scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared spectroscopy. They revealed that the PANI NWs were obtained with diameters ranging from 50 to 200 nm and length up to hundreds of micro meters, depending on growth time. The as-obtained PANI NWs on the electrode exhibited a porous nature and the conducting emeraldine type structure. The gas sensing properties of PNAI NWs were explored by monitoring NH₃ in synthetic air in the concentration range of 25–500 ppm at room temperature. The results obtained demonstrated that PANI NWs have good potential as novel room temperature sensors for practical applications.     

Au/TiO2 nanorod‐based Schottky‐type UV photodetectors

TiO₂ nanorods (NRs) were synthesized on fluorine‐doped tin oxide (FTO) pre‐coated glass substrates using hydrothermal growth technique. Scanning electron microscopy studies have revealed the formation of vertically‐aligned TiO₂ NRs with length of ～2 µm and diameter of 110–128 nm, homogenously distributed over the substrate surface. 130 nm thick Au contacts using thermal evaporation were deposited on the n‐type TiO₂ NRs at room temperature for the fabrication of NR‐based Schottky‐type UV photodetectors. The fabricated Schottky devices functioned as highly sensitive UV photodetectors with a peak responsivity of 134.8 A/W (λ = 350 nm) measured under 3 V reverse bias. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Bandgap engineering of GaxZn1–xO nanowire arrays for wavelength‐tunable light‐emitting diodes

Wavelength‐tunable light‐emitting diodes (LEDs) of Ga_xZn_1–xO nanowire arrays are demonstrated by a simple modified chemical vapor deposition heteroepitaxial growth on p‐GaN substrate. As a gallium atom has similar electronegativity and ion radius to a zinc atom, high‐level Ga‐doped Ga_xZn_1–xO nanowire arrays have been fabricated. As the x value gradually increases from 0 to 0.66, the near‐band‐edge emission peak of Ga_xZn_1–xO nanowires shows a significant shift from 378 nm (3.28 eV) to 418 nm (2.96 eV) in room‐temperature photoluminescence (PL) measurement. Importantly, the electroluminescence (EL) emission of Ga_xZn_1–xO nanowire arrays LED continuously shifts with a wider range (∼100 nm), from the ultraviolet (382 nm) to the visible (480 nm) spectral region. The presented work demonstrates the possibility of bandgap engineering of low‐dimensional ZnO nanowires by gallium doping and the potential application for wavelength‐tunable LEDs.     

Self‐Assembly of Drug–Drug Conjugates as Drug Self‐Delivery System for Tumor‐Specific pH‐Triggered Release

An acid‐labile doxorubicin dimer (D‐DOX) is designed as drug–drug conjugate for tumor intracellular pH‐triggered release, by conjugating doxorubicin (DOX) with adipic acid dihydrazide (ADH). The dimer‐based surfactants modified with polyethylene glycol (PEG), DOX‐ADH‐DOX‐PEG or are synthesized by mono‐PEGylation and bi‐PEGylation, respectively. Then the prodrug nanoparticles are fabricated with different drug contents via dialyzing the mixture solution of D‐DOX and the PEGylated surfactants in dimethyl sulfoxide (DMSO) with different mass ratios against water. It is found that the smaller prodrug nanoparticles (142–163 nm) could be obtained with the mono‐PEGylated surfactant, than those of 157–225 nm with the bi‐PEGylated surfactant. Furthermore, the mono‐PEGylated surfactant results in a higher drug content of 51% due to their lower PEG contents. All prodrug nanoparticles could release DOX completely within 36 h at pH 5.0, with the premature drug leakage of less than 10% at pH 7.4. The 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assays demonstrate the proposed drug self‐delivery system possessed an enhanced anticancer efficacy against HepG2 cells than the free DOX.     

Single and networked CuO nanowires for highly sensitive p‐type semiconductor gas sensor applications

Development of high‐performance p‐type semiconductor based gas sensors exhibiting fast‐response/recovery times with ultra‐high response are of major importance for gas sensing applications. Recent reports demonstrated the excellent properties of p‐type semiconducting oxide for various practical applications, especially for selective oxidation of volatile organic compounds (VOCs). In this work, sensors based on CuO nanowire (NW) networks have been successfully fabricated via a simple thermal oxidation process on pre‐patterned Au/Cr pads. Our investigation demonstrates high impact of the process temperature on aspect ratio and density of copper oxide NWs. An optimal temperature for growth of thin and densely packed NWs was found to be at 425 °C. The fabricated sensors demonstrated ultra‐high gas response by a factor of 313 to ethanol vapour (100 ppm) at an operating temperature of 250 °C. High stability and repeatability of these sensors indicate the efficiency of p‐type oxide based gas sensors for selective detection of VOCs. A high‐performance nanodevice was fabricated in a FIB‐SEM system using a single CuO NW, demonstrating an ethanol response of 202 and rapid response and recovery of ～198 ms at room temperature. The involved gas sensing mechanism of CuO NW networks has been described. We consider that the presented results will be of a great interest for the development of higher‐performance p‐type semiconductor based sensors and bottom‐up nanotechnologies. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Light Harvesting and Enhanced Performance of Si Quantum Dot/Si Nanowire Heterojunction Solar Cells

Si nanowires (Si NWs) structures with good antireflection and enhanced optical‐absorption properties are used to fabricate Si quantum dots/Si NWs heterojunction solar cells. The Si NWs prepared by the metal‐assisted chemical‐etching technique exhibit a very low reflection in a wide spectral range (300–1200 nm). Correspondingly, the optical absorption reaches as high as 88.9% by weighting AM1.5G solar spectrum. Both the short current density and open current voltage are improved compared to the reference flat cell. However, the photovoltaic properties are degraded by varying the Si NWs with long etching time, possibly due to the increased etching‐induced surface states. The optimal Si NWs lead to the best cell with the power conversion efficiency of 11.3%.     

Near‐Infrared‐Light‐Induced Fast Drug Release Platform: Mesoporous Silica‐Coated Gold Nanoframes for Thermochemotherapy

Development of advanced theranostics for personalized medicine is of great interest. Herein, a multifunctional mesoporous silica‐based drug delivery carrier has been developed for efficient chemo/photothermal therapy. The unique Au nanoframes@mSiO₂ spheres are elaborately prepared by utilizing Ag@mSiO₂ yolk–shell spheres as the template through spatially confined galvanic replacement method. Compared with the Ag@mSiO₂ yolk–shell spheres, the resultant Au nanoframes@mSiO₂ spheres show a strong and broad near‐infrared (NIR) absorbance in the 550–1100 nm region, high surface areas, and good biocompatibility. When irradiated with a NIR laser with a power intensity of 1 W cm^?2 at 808 nm, they can become highly localized heat sources through the photothermal effect. Moreover, the photothermal effect of the Au nanoframes can significantly promote the fast release of doxorubicin. The in vitro studies show obvious synergistic effects combining photothermal therapy and chemotherapy in the Au nanoframes@mSiO₂ spheres against Hela cells. It is believed that the as‐obtained multifunctional vehicles provide a promising platform for the combination of hyperthermia and chemotherapy for cancer treatment application.     

Direct observation of elemental segregation in InGaN nanowires by X‐ray nanoprobe

Using synchrotron radiation nanoprobe, this work reports on the elemental distribution in single In_x Ga_1–xN nanowires (NWs) grown by molecular beam epitaxy directly on Si(111) substrates. Single NWs dispersed on Al covered sapphire were characterized by nano‐X‐ray fluorescence, Raman scattering and photoluminescence spectroscopy. Both Ga and In maps reveal an inhomogeneous axial distribution inside sin‐ gle NWs. The analysis of NWs from the same sample but with different dimensions suggests a decrease of In segregation with the reduction of NW diameter, while Ga distribution seems to remain unaltered. Photoluminescence and Raman scattering measurements carried out on ensembles of NWs exhibit relevant signatures of the compositional disorder. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology of Si nanowires fabricated by laser ablation using gold catalysts

Si nanowires (NWs) were fabricated successfully by laser ablation using Au as catalyst. Si wafers were used as the collector. The diameters of Si NWs ranged from 20 to 150 nm. Different forms of Si NWs were observed at different local sites inside a furnace: Si NWs with a high aspect ratio of length to diameter, Si NWs with defects and Si NWs with Au-containing nanoparticles being embedded. Especially, a nano-particle embedded Si NW is a new nanostructure that is observed for the first time. PACS 81.07.-b; 81.07.Bc; 81.16.-c; 81.20.-n     

Wide band gap and p‐type conductive Cu–Nb–O films

Cu–Nb–O films with a thickness of ca. 150 nm were prepared on borosilicate glass substrates using CuNbO₃ ceramic target at substrate temperature of 500 °C by pulsed laser deposition. The X‐ray diffraction patterns showed that the Cu–Nb–O films were amorphous or an aggregation of fine crystals. The post‐annealed film at 300 °C in N₂ gas showed 80% transmission in visible light (band gap = 2.6 eV) and high p‐type conductivity of 21 S cm^–1. The Cu–Nb–O film with a thickness of 100 nm, fabricated from the target with a composition of Cu/Nb = 0.9, showed the highest p‐type conductivity of 116 S cm^–1. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Functionalized Pd/ZnO Nanowires for Nanosensors

A method for surface doping and functionalization of ZnO nanowires (NWs) with Pd (Pd/ZnO) in a one‐step process is presented. The main advantage of this method is to combine the simultaneous growth, surface doping, and functionalization of NWs by using electrochemical deposition (ECD) at relatively low temperatures (90 °C). Our approach essentially reduces the number of technological steps of nanomaterial synthesis and final nanodevices fabrication with enhanced performances. A series of nanosensor devices is fabricated based on single Pd/ZnO NWs with a radius of about 80 nm using a FIB/SEM system. The influence of Pd nominal composition in Pd/ZnO NW on the H₂ sensing response is studied in detail and a corresponding mechanism is proposed. The results demonstrate an ultra‐high response and selectivity of the synthesized nanosensors to hydrogen gas at room temperature. The optimal concentration of PdCl₂ in the electrolyte to achieve extremely sensitive nanodevices with a gas response (S_H2) ≈ 1.3 × 10⁴ (at 100 ppm H₂ concentration) and relatively high rapidity is 0.75 µM. Theoretical calculations on Pd/ZnO bulk and functionalized surface further validated the experimental hypothesis. Our results demonstrate the importance of noble metal presence on the surface due to doping and functionalization of nanostructures in the fabrication of highly‐sensitive and selective gas nanosensors operating at room temperature with reduced power consumption.