pH reversible micelle transition of a tertiary amine-based gemini surfactant in aqueous solution

In this work, we prepared a tertiary amide-based gemini surfactant (DSTAPA), which contained two pH-sensitive tertiary amide head groups. Then the molecule state distribution and self-assembly transition of the surfactant in aqueous solution were investigated under different pH conditions. The DSTAPA molecules were on the states of double cationic (DSTAPAH²⁺), single cationic (DSTAPAH⁺), and double tertiary amine groups (DSTAPA) under acidic, neutral, and basic conditions, respectively. With the variation of the molecule states, the sample was water-like below pH of 6.8 and immediately transformed to gel-like fluid between pH of 6.8 and 7.8, then changed to white precipitate with the further increase of pH value. Furthermore, the microstructure and regulation mechanism were investigated by rheological measurements, dynamic light scattering, and cryogenic transmission electron microscopy. The appearance and micelle transitions of the DSTAPA aqueous solution are actually owing to the spherical–worm-like micelle transition, leading to dramatic viscosity increase and hydrogel formation. This transition was completely reversible and repeated for at least three cycles. Finally, a reasonable mechanism of the transition was proposed based on the viewpoints of the molecular states and micelle structures. The DSTAPA aqueous system with pH-reversible property has a great potential application in oil and gas production.     

A pH‐responsive self‐fluorescent polymeric micelle as a potential optical imaging probe

A series of methoxypolyethylene glycol‐terminated self‐fluorescent polyurethane multi‐block copolymers with excellent pH‐responsivity, self‐fluorescence, and biocompatibility are designed and synthesized. In our design, 1, 4‐bis (hydroxyethyl) piperazine is chosen as a pH‐responsive segment which can donate or accept protons in response to the change of environmental pH, and fluorescein isothiocyanate is used as a fluorescent dye conjugated into the micelles to offer self‐fluorescence. The chemical structure of the polyurethane multi‐block copolymers is characterized by nuclear magnetic resonance and Fourier transform infrared spectroscopy. The results of the acid‐based titration, the fluorescence spectrometry, and the ultraviolet visible spectroscopy indicate that the polyurethane multi‐block copolymers own an excellent pH‐buffering capacity responded to the change of pH values and the favorable self‐fluorescence property in an aqueous solution. And the ultraviolet absorption peaks of samples are strengthened with increasing of pH values, indicating that methoxypolyethylene glycol‐terminated self‐fluorescent polyurethane multi‐block copolymer can be a pH‐dependent fluorescent probe in a broad pH range. In addition, the in vitro cytotoxicity test showed that the polyurethane multi‐block copolymer has low cytotoxicity and good biocompatibility, which make it a promising nanoplatform for molecular imaging, diagnosis, and treatment of disease.     

RAFT synthesis of amphiphilic (A‐ran‐B)‐b‐C diblock copolymers with tunable pH‐sensitivity

RAFT homopolymerization of 2‐(diisopropylamino)ethyl methacrylate (DPA) and 2‐(diethylamino)ethyl methacrylate (DEA) and their random copolymerization were investigated. The random copolymers of DPA‐ran‐DEA were synthesized and used as macro‐CTA to prepare poly(DPA‐ran‐DEA)‐b‐poly(N‐(2‐hydroxypropyl) methacrylamide) amphiphilic block copolymers. The ¹H NMR and GPC measurements confirmed the successful synthesis of these copolymers. The potentiometric titration results showed that the pK_b values of these copolymers were in the range of 6.7 ～ 7.7 and linearly varied with the DPA/DEA composition, regardless of the block length of HPMA. The pH‐induced micellization in PBS solution was verified by fluorescence spectroscopy. The dynamic light scattering evaluation showed that the hydrodynamic diameters of these micelles are between 37 ～ 43 nm © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3740–3748, 2008     

The pH and temperature dual-responsive micelle transition in the mixture of hydrotrope potassium phthalic acid and quaternary ammonium surfactants cetyltrimethylammonium bromide

A facile and effective route to prepare a pH and temperature dual-responsive surfactant micelle has been introduced based on hydrotrope potassium phthalic acid (PPA) and quaternary ammonium surfactants cetyltrimethylammonium bromide (CTAB). The system can be switched between viscoelastic solution and water-like fluid by adjusting pH values. In this paper, different binding abilities between the hydrotrope and surfactants have been demonstrated during the process of adjusting pH because the hydrotrope has different ionization degrees with the pH variation. And with the aid of rheological measurements and cryo-TEM observation, we discussed the different effects of the hydrotrope on surfactants at various pH values in detail and analyzed the possible aggregate transition mechanism of CTAB–PPA system induced by pH. Besides, this CTAB–PPA system has temperature-responsive property when pH?<?2.50. The temperature sensitivity and reversible control of rheological properties may greatly facilitate practical applications of such responsive viscoelastic solution.     

Effect of oligonucleotide conformation on its facilitation efficiency on negatively charged micelle‐to‐vesicle transition

In our previous article, we reported for the first time that the oligonucleotides composed of one nucleotide species, for example, oligo d(A)_n, oligo d(C)_n, and oligo d(T)_n, could facilitate negatively charged sodium dodecyl sulfate/dodecyl triethyl ammonium bromide mixed micelles to transform to vesicles. In this study, we will report the facilitation ability of self‐complementary hairpin‐structured oligonucleotides, oligo d(A_nCT_n) and oligo d(AT)_nACT(AT)_n (or oligo d(AT)_nC(AT)_n), on micelle‐to‐vesicle transition. It is found that the facilitation behavior of hairpin‐structured oligonucleotide is different from that of the oligonucleotide comprising one base species, and the facilitation efficiency of hairpin‐structured oligonucleotide is closely dependent on the sequence of bases A and T; oligo d(A_nCT_n) is more efficient than oligo d(AT)_nACT(AT)_n (or oligo d(AT)_nC(AT)_n). Moreover, oligo d(A_nCT_n) is more efficient than oligo d(A)_n, oligo d(C)_n, and oligo d(T)_n. Since so far, there is very limited report about the facilitation effect of oligonucleotide and DNA on vesicle formation as well as the role of their conformation in their interaction with surfactant, this study should be expected to provide some helpful information for the application of DNA/amphiphile system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 852–860, 2010     

Spiropyran‐Based Polymeric Vesicles: Preparation and Photochromic Properties

A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.

     

Microdomain morphology of lamella‐forming diblock copolymer confined in a thin film

We report the self‐consistent field theory (SCFT) of the morphology of lamella‐forming diblock copolymer thin films confined in two horizontal symmetrical/asymmetrical surfaces. The morphological dependences of thin films on the polymer‐surface interactions and confinement, such as film thickness and confinement spatial structure, have been systematically investigated. Mechanisms of the morphological transitions can be understood mainly through the polymer‐surface interactions and confinement entropy, in which the plat confinement surface provides a surface‐induced effect. The confinement is expressed in the form of the ratio D/L₀, here D is film thickness, and L₀ is the period of bulk lamellar‐structure. Much richer morphologies and multiple surface‐induced morphological transitions for the lamella‐forming diblock copolymer thin films are observed, which have not been reported before. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1–10, 2009     

Triple hydrogen‐bonding block copolymers via RAFT polymerization: Synthesis,vesicle formation,and molecule‐recognition behavior

Reversible addition fragmentation chain transfer polymerization afforded triple hydrogen‐bonding block copolymers (PBA‐b‐PDAD) with well‐controlled molecular weight and molecular weight distributions (1.2–1.4). The complexation via specific hydrogen bonding between these block copolymers in CHCl₃ provided an unprecedented approach for the formation of spherical vesicles. Atomic force microscopy and dynamic light‐scattering measurements revealed that the resultant polymeric vesicles were about 100 nm in radius. Triple hydrogen‐bonding interactions between maleimide and PBA‐b‐PDAD resulted in the dissociation of these spherical vesicles, facilitating the guest molecule recognition. The hydrogen‐bonding interaction between maleimide and the PBA‐b‐PDAD was further confirmed by ¹H NMR and FTIR spectra. These results indicated that these vesicles of triple hydrogen‐bonding block copolymer could be a potential new vehicle for molecular recognition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1633–1638     

A Facile Method to Form a Densely Grafted PEO‐b‐P4VP Brush on Gold Surface

Here we report a facile method for the preparation of a PEO₁₁₃‐b‐P4VP₉₃ brush on gold surface with a grafting density as high as 1.32 chains/nm²; the P4VP blocks were physically adsorbed on gold surface forming an inner layer while the PEO blocks stretched towards the solution forming PEO brush. PEO₁₁₃‐b‐P4VP₉₃ micelles with P4VP core and PEO shell formed in methanol/water mixed solvents were used as the precursor. By adsorbing PEO₁₁₃‐b‐P4VP₉₃ micelles from pure water, in which the density of the micelles is the largest, maximum amount of the micelles was adsorbed onto gold surface, and the adsorbed micelles existed as individual domains on the surface. To prepare the polymer brush with a density as high as possible, we annealed the adsorbed micelles by methanol/water mixed solvent at the volume fraction of methanol (VF) of 20%, which was the proper proportion at which the core‐forming P4VP chains began to be flexible but the integrity of the micelles was remained. At this volume fraction, almost all the adsorbed micelles originally existing as individual domains were transformed into a dense polymer brush.     

Poly(dimethylaminoethyl methacrylate)‐b‐poly(hydroxypropyl methacrylate) copolymers: Synthesis and pH/thermo‐responsive behavior in aqueous solutions

The synthesis and self‐assembly properties in aqueous solutions of novel amphiphilic block copolymers composed of one hydrophilic, pH and temperature responsive poly(dimethyl amino ethyl methacrylate) (PDMAEMA) block and one weakly hydrophobic, water insoluble, potentially thermoresponsive poly(hydroxy propyl methacrylate) (PHPMA) block, are reported. The block copolymers were prepared by RAFT polymerization and were molecularly characterized by size exclusion chromatography, NMR, and FTIR spectroscopies. The PDMAEMA‐b‐PHPMA amphiphilic block copolymers self‐assemble in different nanostructured aggregates when inserted in aqueous media. The effects of different solubilization protocols, as well as the effects of solution temperature and pH on the structure of the aggregates, are studied by light scattering and fluorescence spectroscopy measurements. Experimental results indicate that there is a number of solution preparation and physicochemical parameters that allow the control and manipulation of the structure and thermoresponsive properties of PDMAEMA‐b‐PHPMA aggregates in aqueous media. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1962–1977     

Facile synthesis and responsive behavior of PDMS‐b‐PEG diblock copolymer brushes via photoinitiated “thiol‐ene” click reaction

We present herein a mild and rapid method to create diblock copolymer brushes on a silicon surface via photoinitiated “thiol‐ene” click reaction. The silicon surface was modified with 3‐mercaptopropyltrimethoxysilane (MPTMS) self‐assembled monolayer. Then, a mixture of divinyl‐terminated polydimethylsiloxane (PDMS) and photoinitiator was spin‐coated on the MPTMS surface and exposed to UV‐light. Thereafter, a mixture of thiol‐terminated polyethylene glycol (PEG) and photoinitiator were spin‐coated on the vinyl‐terminated PDMS‐treated surface, and the sequent photopolymerization was carried out under UV‐irradiation. The MPTMS, PDMS, and PEG layers were carefully identified by X‐ray photoelectron spectroscopy, atomic force microscopy, ellipsometry, and water contact angle measurements. The thickness of the polydimethylsiloxane‐block‐poly(ethylene glycol) (PDMS‐b‐PEG) diblock copolymer brush could be controlled by the irradiation time. The responsive behavior of diblock copolymer brushes treated in different solvents was also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Cross‐Linked Polymeric Micelle pH Nanosensors: An Investigation of Design Flexibility

The design flexibility that polymeric micelles offer in the fabrication of optical nanosensors for ratiometric pH measurements is investigated. pH nanosensors based on polymeric micelles are synthesized either by a mixed‐micellization approach or by a postmicelle modification strategy. In the mixed‐micellization approach, self‐assembly of functionalized unimers followed by shell cross‐linking by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) results in stabilized cRGD‐functionalized micelle pH nanosensors. In the postmicelle modification strategy, simultaneous cross‐linking and fluorophore conjugation at the micelle shell using CuAAC results in a stabilized micelle pH nanosensor. Compared to the postmicelle modification strategy, the mixed‐micellization approach increases the control of the overall composition of the nanosensors. Both approaches provide stable nanosensors with similar pK_a profiles and thereby nanosensors with similar pH sensitivity.

     

Micelle‐to‐vesicle transition induced by oligonucleotide in SDS/DEAB mixed system with a net negative charge

Sodium dodecyl sulfate (SDS)/dodecyl triethyl ammonium bromide (DEAB) mixed micelles (with SDS in excess) can transform to vesicles only when the temperature is higher than a critical value. In this study, we report for the first time that oligonucleotide can decrease the critical temperature to a much lower value and, hence, induce micelle‐to‐vesicle transition. The facilitation efficiency of oligonucleotide on vesicle formation is closely dependent on its size and base composition. Moreover, the SDS/DEAB/oligonucleotide vesicles are negatively charged and the hydrophobic interaction between oligonucleotide and SDS/DEAB mixed micelles is the driving force. As, so far, the report about the facilitation effect of oligonucleotide and DNA on vesicle formation is very limited, this study may provide some helpful information for the application of DNA/amphiphile system. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7491–7504, 2008     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

RAFT synthesis of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) for zinc phthalocyanine‐loaded polymeric micelles as photodynamic therapy photosensitizers

A series of polystyrene‐block‐poly(polyethylene glycol monomethyl ether acrylate) (PSt_m‐b‐PPEGA_n) polymers were systematically synthesized as carriers for zinc phthalocyanine (ZnPc) for photodynamic therapy via reversible addition and fragmentation chain transfer polymerization. The degree of polymerization of the styrene (m) and PEGA units (n) of the resulting block copolymers were characterized to be n = 174, 40, and 18 for m = 52; and n = 200, 84, and 31 for m = 30. All the block copolymers formed micelles in water. The critical micelle concentration (CMC) of the PSt_m‐b‐PPEGA_n was determined by fluorometry using pyrene as a hydrophobic probe. The CMC value increased from 4.5 to 20 mg·L⁻¹ with an increase in the mole fraction of PEGA units. The median diameters of the micelles increased from 19 to 31 nm for PSt₅₂‐b‐PPEGA_n and from 15 to 23 nm for PSt₃₀‐b‐PPEGA_n with increasing n value. ZnPc‐loaded micelles were prepared by dialysis of the block copolymer in the presence of ZnPc followed by removal of large aggregates by filtration. The encapsulation efficiency was dramatically changed in the range of 0–68%. The light‐dose‐dependent cytotoxicity of the ZnPc‐loaded PSt₃₀‐b‐PPEGA₂₀₀ was clearly established in HeLa cell lines; while no cytotoxicity was confirmed under the dark. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 560–570     

Triple responsive block copolymers combining pH‐responsive,thermoresponsive, and glucose‐responsive behaviors

Polymers with multiple tunable responses were achieved by incorporating boronic acid functionality along the backbone of a thermoresponsive polymer. The inherent Lewis acidity and diol‐sensitivity of boronic acid moieties allowed these polymers to respond to changes in pH and glucose concentration. Through reversible addition‐fragmentation chain transfer copolymerization of boronic acid‐containing monomers with N‐isopropylacrylamide, well‐defined block copolymers were synthesized containing a hydrophilic N,N‐dimethylacrylamide block and a second, responsive block with temperature‐dependent water solubility, making the resulting polymers capable of self‐assembly into nanostructures upon heating. By incorporating boronic acids within the thermoresponsive block, the cloud point of the polymer depended on the solution conditions, including pH and diol concentration, allowing tunable cloud point ranges. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2309–2317     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

The improvement of electro‐optical properties of polymer‐dispersed liquid crystals using copolymer macroinitiator with different glass transition temperature

In this article, copolymer macroinitiators prepared with styrene and iso‐octyl acrylate by reversible additional‐fragmental chain transfer polymerization were used to prepare polymer‐dispersed liquid crystals (PDLCs) with methyl acrylate. The electro‐optical properties of the PDLCs were investigated. The results showed that the glass transition temperature (T_g) of the macroinitiator has a great influence on the memory effect of the resulting PDLCs. Low driving voltage and low memory effect PDLCs could easily be obtained with copolymer macroinitiators. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Crew‐cut aggregates from self‐assembly of blends of polystyrene‐b‐poly(acrylic acid) block copolymers and homopolystyrene in solution

The formation and morphological characteristics of crew‐cut aggregates from blends of polystyrene‐b‐poly(acrylic acid) diblock copolymer and polystyrene homopolymer in solution were studied by static light scattering, transmission electron microscopy and size exclusion chromatography. The crew‐cut aggregates, consisting of a polystyrene core and a poly(acrylic acid) corona, were prepared by direct dissolution of the polymer blends in a selective solvent mixture consisting of 93 wt % dimethylformamide and 7 wt % water. It is found that the aggregation behavior depends strongly on the relative volume fractions of the block copolymer and homopolymer in the blends. This is a result of the difference in solubility between the copolymer and the homopolymer in solution which, in turn, influences their miscibility and mutual solubility and consequently the morphology of the formed crew‐cut aggregates. Specifically, when the homopolymer fraction is low, it is mainly dissolved in the cores of the crew‐cut aggregates formed by the block copolymer. When the homopolymer fraction exceeds its solubility limit in the copolymer micelles, aggregates of another type are formed which contain a major fraction of the homopolymer. These aggregates are usually much larger than the primary micelles and have an internal structure due to the formation of reverse micelles from the dissolved block copolymer chains. The importance of thermodynamic vs. kinetic aspects during the formation of the crew‐cut aggregates is also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1469–1484, 1999