Novel amphiphilic graft copolymers bearing hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains

A novel amphiphilic graft copolymer consisting of hydrophilic poly(acrylic acid) backbones and hydrophobic poly(butyl methacrylate) side chains was synthesized by successive atom transfer radical polymerization followed by hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of graft copolymers with narrow molecular weight distributions (polydispersity index < 1.40). Hydrophobic side chains were connected to the backbone through stable C? C bonds instead of ester connections. Poly(methoxymethyl acrylate) backbone was easily hydrolyzed to poly(acrylic acid) backbone with HCl without affecting the hydrophobic side chains. The amphiphilic graft copolymer could form stable micelles in water. The critical micelle concentration in water was determined by a fluorescence probe technique. The morphology of the micelles was preliminarily explored with transmission electron microscopy and was found to be spheres. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6857–6868, 2006     

Vinylcarbonates and vinylcarbamates: Biocompatible monomers for radical photopolymerization

The last decade has seen a remarkable interest in the use of biocompatible and biodegradable polymers as scaffolds for tissue engineering. The fabrication of 3D scaffolds by lithography‐based additive manufacturing technology (AMT) represents an appealing approach. As poly(lactic acid), the state of the art biocompatible and biodegradable material, cannot be processed by these photopolymerization‐based techniques, it has so far been necessary to use selected (meth)acrylates. By developing new photopolymers based on vinyl carbonates and vinyl carbamates as a reactive group we have been able to avoid most of the disadvantages of classical (meth)acrylate‐based photopolymers. The new generation of biocompatible monomers show low cytotoxicity, have good storage stability, and are sufficiently photoreactive to be structured by lithography based AMT. The mechanical properties and rates of degradation of the polymers can be easily tuned over a broad range. Degradation results in the formation of nonacidic and nontoxic degradation products of low molecular weight that can be easily transported within the human body. Initial in vivo tests showed significant osseointegration of the 3D cellular scaffolds and no signs of implant rejection. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Role of vacuum ultraviolet irradiation in plasma‐induced graft polymerization in the pore‐filling polymerization of porous materials

The role of vacuum ultraviolet (VUV) rays contained in the plasma during plasma‐induced graft polymerization in the pores of a porous high‐density polyethylene (HDPE) substrate was investigated through the separation of the VUV rays from the plasma with LiF, CaF₂, and quartz filters. Two characteristic phenomena, the effect of the solvent on the grafting rate and the graft polymerization in the pores of the porous substrate, were observed in the VUV‐induced graft polymerization process. These results provided clear evidence that VUV rays in the plasma played an important role in the formation of grafted layers in the pores of the HDPE substrate. The relationship between the penetration depth of the VUV rays and the distribution of the grafted layer inside the substrate was examined. The calculated penetration depth of the VUV rays (and hence the distribution of radicals) and the distribution of the grafted layer were not consistent. However, this inconsistency could be explained by the fact that the effective density of the radicals that could react with the monomer to grow the grafting polymer was very low because of the steric hindrance of the grafted chains. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2068–2074, 2005     

Surface modification of polyamide-6: graft copolymerization of vinyl monomers onto polyamide-6 and thermal analysis of the graft copolymers

Graft copolymerization of vinyl monomers onto polyamide-6 using radical initiation has been investigated. Two monomers were used: methacrylic acid and acrylic acid. The initiators selected included hydrogen peroxide, benzoyl peroxide and azobisisobutyronitrile. The extent of graft copolymerization depends on the concentrations and identity of the initiator and monomer and the time and temperature of the reaction. The graft copolymers were not soluble in solvents that will dissolve the starting material; definitive proof for the formation of the graft copolymers was obtained from infrared spectroscopy. Thermogravimetric analysis was performed on the graft copolymers and it was found that the presence of the acid invariably accelerated the degradation of the polyamide. © 1998 John Wiley & Sons, Ltd.     

Vapor-phase graft copolymerization of binary solid monomers onto poly(ethylene-co-vinyl acetate) film by ultraviolet irradiation

Vapor-phase graft copolymerizations of acenaphthylene–maleimide or acenaphthylene–maleic anhydride binary solid monomers onto poly(ethylene-co-vinyl acetate) films were carried out under ultraviolet irradiation. The extent of sorption of single or binary monomers increased with the increasing vinyl acetate content in the backbone polymers. The sorbed binary monomers were mainly composed of acenaphthylene, but the maleimide or maleic anhydride fraction increased with the increasing vinyl acetate content of the films and the composition was little affected by surface hydrolysis. In all series of graft polymerization of single or binary monomers the overall extent of grafting increased with the vinyl acetate content and was suppressed by the surface hydrolysis of the backbone film. The composition of the grafted copolymer, however, differed markedly, depending on the combination of binary monomers. The grafted copolymer in the acenaphthylene–maleimide system was composed mainly of acenaphthylene units, whereas that in the acenaphthylene–maleic anhydride system was composed mainly of maleic anhydride units. The results were compared with those of γ-ray grafting, and it was suggested that the contribution of a direct supply of monomers from vapor phase and the existence of an acetoxy group on the surface of the film should play an important role in the grafting reaction.     

Ozone-induced graft polymerization onto polymer surface

Ozone-induced graft polymerization was carried out to improve polymer surfaces. The polymers were exposed to ozone and the surface density of peroxides formed was determined by three methods; iodide, DPPH, and peroxidase method. The peroxide production could be readily controlled by the ozone concentration and the ozone exposure time. In addition, it was dependent on the kind of polymer. Further, it seemed probable that the ozone oxidation introduced peroxides not only on the outermost surface but also into a layer deeper from the outermost surface. Such polymeric peroxides were capable of initiating graft polymerization onto PU. All the physical and biological measurements on the grafted surface indicated that ozone-induced graft polymerization has effectively made the PU surface covered with the grafted water-soluble chains, their location being restricted to the film surface region. The interaction of the PU surface with blood components could be greatly reduced by the surface graft polymerization. © 1993 John Wiley & Sons, Inc.     

A facile approach to surface graft vinyl acetate onto polyolefin articles

A facile and environment friendly approach was developed to graft vinyl acetate (VAc) onto plastic articles in an aqueous solution using tert‐butyl alcohol (TBA) as a compatiblizer and benzoyl peroxide (BPO) as an initiator. In a novel setup, excessive monomer suspended in a water phase, VAc could be conveniently grafted on the model substrate of low‐density polyethylene (LDPE) film and the graft percentage (GP) could be developed up to 7.3%. Reaction temperature could increase GP significantly, while adding monomer over a critical volume did not influence GP. By adding some paradioxybenzene, i.e. 0.06–0.08% in VAc phase, homopolymer PVAc could be avoided practically, while graft polymerization proceeded favorably in aqueous solutions. It was proved by attenuated total reflection‐infrared (ATR‐IR) spectroscopy that grafted VAc was located mainly at the surface of the LDPE film and hydrophilic nature of both grafted and alcoholyzed films were improved via contact angle measurements. Copyright © 2004 John Wiley & Sons, Ltd.     

Surface graft polymerization of acrylamide onto poly(ethylene terephthalate) film by UV irradiation

To improve the low water wettability of poly(ethylene terephthalate) (PET), graft polymerization of acrylamide (AAm) by UV irradiation was performed onto the surface of a PET film with the simultaneous irradiation method without using a photo sensitizer. The PET film immersed in a 10 wt % deaerated aqueous solution of AAm was found to become highly hydrophilic upon UV irradiation. Optical microscopy on cross sections of grafted films showed that localization of the graft polymerization was restricted to a thin surface region of the film. Both the low concentration of polymer radicals formed by UV irradiation and the monomer penetration limited to the film surface would be responsible for localization of the grafted layer to the film surface region. Pretreatment of the PET film with benzyl alcohol was effective for enhancement of the graft polymerization. Retention of high hydrophilicity of the surface even after rigorous extraction of homopolymer and a comparative study of polymerization without UV irradiation strongly suggested that UV irradiation of the PET film under immersion in the deaerated AAm aqueous solution would lead to formation of the true graft copolymer.     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Tethering hydrophilic polymer brushes onto PPESK membranes via surface-initiated atom transfer radical polymerization

Surface-initiated atom transfer radical polymerization (ATRP) was used to graft hydrophilic comb-like poly((poly(ethylene glycol) methyl ether methacrylate), or P(PEGMA), brushes from chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) membrane surfaces. Prior to ATRP, chloromethylation of PPESK was beforehand performed and the obtained CMPPESK was prepared into porous membranes by phase inversion process. It was demonstrated that the benzyl chloride groups on the CMPPESK membrane surface afforded effective macroinitiators to graft the well-defined polymer brushes. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the grafting of P(PEGMA) chains. Water contact angle measurements indicated that the introduction of P(PEGMA) graft chains promoted remarkably the surface hydrophilicity of PPESK membranes. The effects of P(PEGMA) immobilization on membrane morphology, permeability and fouling resistance were investigated. It was found that the comb-like P(PEGMA) grafts brought smaller pore diameters and higher solute rejections to PPESK membranes. The results of dynamic anti-fouling experiments showed the anti-fouling ability of the membranes was significantly improved after the grafting of P(PEGMA) brushes.     

Preparation of a copolymer of methyl methacrylate with a new monomer, 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate,and its initiation of the graft copolymerization of styrene with a controlled radical mechanism

A copolymer [P(MMA‐co‐TBPM)] was prepared by the radical polymerization of methyl methacrylate (MMA) and 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate (TBPM) with azobisisobutyronitrile as an initiator. TBPM was a new monomer containing an activated ester. Both the copolymer and TBPM were characterized with NMR, IR, and gel permeation chromatography in detail. It was confirmed that P(MMA‐co‐TBPM) could initiate the graft polymerization of styrene by the cleavage of the activated ester of the TBPM segment. This process was controllable, and the molecular weight of the graft chain of polystyrene increased with the increment of conversion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4398–4403, 2002     

电火花引发丙烯酰胺接枝BOPP薄膜的研究

采用FT-IR,ESCA,试样与水接触角和接枝率的测定探索了电火花用于引发丙烯酰胺(AAM)在BOPP薄膜表面接枝聚合反应的方法,研究了接枝BOPP薄膜的表面结构和亲水性能。结果表明,电火花能有效地引发AAM在BOPP薄膜表面的接枝聚合反应,随着电火花处理时间和接枝反应时间的延长,AAM在BOPP薄膜表面的接枝率增大。电火花处理10min,BOPP薄膜在70℃,20%(质量分数)的AAM水溶液中反应1h,接枝率高达2.06%。接枝后BOPP薄膜与水的接触角显著下降,亲水性能得到明显改善。     

Photochemical behavior of p-dimethylaminobenzoylated polystyrene as polymerization photoinitiator: Synthesis of graft copolymers

The photochemical behavior of p-dimethylaminobenzoylated polystyrene (PS-MI) in benzene solution has been investigated, both in the presence and absence of methyl methacrylate (MMA). This behavior has been compared with that of the model compound, 4-isopropyl-4′-N,N-dimethylaminobenzophenone (CU-MI). PS-MI photoreduction takes place only through excimer formation due to the high local chromophore concentration, and therefore, PS-MI disappearance quantum yield is close to the previously calculated limiting value (0.02) and independent of chromophore concentration. Several parameters that characterize the polymerization process have been determined; it has been found that the obtained PMMA is photografted onto PS-MI backbone. This is in agreement with the proposed mechanism for radical generation. No homo-PMMA formation has been detected. © 1993 John Wiley & Sons, Inc.     

Generation of radical species on polypropylene by alkylborane‐oxygen system and its application to graft polymerization

Graft polymerization of ethyl acrylate and n‐butyl acrylate onto surface of polypropylene (PP) beads (diameter: 3.2 mm) were carried out by using a redox system composed of triethylborane (Et₃B) and molecular oxygen in air. The amounts of the grafted polymers increased by prolonging a period of soaking PP beads in a solution of Et₃B in hexane, a less polar solvent of which affinity with PP would be higher than that of tetrahydrofuran, a highly polar solvent. These results implied that the present graft polymerization involved: (1) interpenetration of Et₃B into the surface area with the aid of hexane as a solvent, (2) its aerobic oxidation to generate a radical species, (3) abstraction of proton from PP by the radical species, and (4) initiation of polymerization from the resulting radical on the PP surface. Besides the acrylates, acrylic acid, and glycidyl methacrylate were also grafted onto the surface of PP to endow it with carboxyl and epoxy moieties, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6163–6167, 2009     

Photoinitiation mechanism of free radical photopolymerization in the presence of cyclic acetals and related compounds

The behavior of six cyclic acetals and related compounds in the photoinitiation step of a radical photopolymerization was investigated. As shown by the photopolymerization kinetic data obtained from FTIR spectroscopy, most of them are efficient coinitiators in the presence of benzophenone (BP) with efficiencies close to a reference amine coinitiator (ethyl dimethylaminobenzoate, EDB). Laser flash photolysis and ESR spin trapping technique were used to study the photochemical mechanisms of the production of initiating radicals and explain the differences in reactivity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A starlike amphiphilic graft copolymer with hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains

A well‐defined starlike amphiphilic graft copolymer bearing hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains was synthesized by successive atom transfer radical polymerization followed by the hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of a graft copolymer with narrow molecular weight distribution. Hydrophobic polystyrene side chains were connected to the backbones through stable C? C bonds. The poly(methoxymethyl acrylate) backbones can be easily hydrolyzed with HCl without affecting the hydrophobic polystyrene side chains. This kind of amphiphilic graft copolymer can form stable sphere micelles in water. The sizes of the micelles were dependent on the ionic strength and pH value. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3687–3697, 2007     

Synthesis of amphiphilic graft copolymer brush and its use as template film for the preparation of silver nanoparticles

A microphase‐separated, amphiphilic graft copolymer consisting of a poly (vinyl chloride) (PVC) backbone and poly(oxyethylene methacrylate) (POEM) side chains, (PVC‐g‐POEM at 62:38 wt %) was synthesized via atom transfer radical polymerization (ATRP). Nuclear magnetic resonance (¹H NMR), FTIR spectroscopy, and transmission electron microscopy (TEM) clearly revealed that the “grafting from” method using ATRP was successful and that the graft copolymer molecularly self‐assembled into discrete nanophase domains of continuous PVC and isolated POEM regions. The self‐assembled graft copolymer film was used to template the growth of silver nanoparticles in solid state by introducing a AgCF₃SO₃ precursor and a UV irradiation process. The in situ formation of silver nanoparticles in the graft copolymer template film was confirmed by TEM, UV–visible spectroscopy, and wide angle X‐ray scattering. FTIR spectroscopy and X‐ray photoelectron spectroscopy also demonstrated the selective incorporation and in situ formation of silver nanoparticles within the hydrophilic POEM domains, presumably due to strong interactions between the silver and the ether oxygen in POEM. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3911–3918, 2008     

Syntheses of graft and star copolymers possessing polyolefin branches by using polyolefin macromonomer

Graft and star copolymers having poly(methacrylate) backbone and ethylene–propylene random copolymer (EPR) branches were successfully synthesized by radical copolymerization of an EPR macromonomer with methyl methacrylate (MMA). EPR macromonomers were prepared by sequential functionalization of vinylidene chain‐end group in EPR via hydroalumination, oxidation, and esterification reactions. Their copolymerizations with MMA were carried out with monofunctional and tetrafunctional initiators by atom transfer radical polymerization (ATRP). Gel‐permeation chromatography and NMR analyses confirmed that poly(methyl methacrylate) (PMMA)‐g‐EPR graft copolymers and four‐arm (PMMA‐g‐EPR) star copolymers could be synthesized by controlling EPR contents in a range of 8.6–38.1 wt % and EPR branch numbers in a range of 1–14 branches. Transmission electron microscopy of these copolymers demonstrated well‐dispersed morphologies between PMMA and EPR, which could be controlled by the dispersion of both segments in the range between 10 nm and less than 1 nm. Moreover, the differentiated thermal properties of these copolymers were demonstrated by differential scanning calorimetry analysis. On the other hand, the copolymerization of EPR macromonomer with MMA by conventional free radical polymerization with 2,2′‐azobis(isobutyronitrile) also gave PMMA‐g‐EPR graft copolymers. However, their morphology and thermal property remarkably differed from those of the graft copolymers obtained by ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5103–5118, 2005     

Properties of double‐hydrophilic graft copolymers with a polyacetal backbone

Graft copolymers consisting of the polyacetal backbone substituted with ? COO^? groups and poly(oxyethylene) (POE) side chains in different proportions were synthesized, and their efficiency as modifiers of the processes occurring at the interphase between inorganic particles and the surrounding aqueous phase was studied. The series of double hydrophilic graft copolymers (DHGC) was obtained differing in the length of the main chain, the number of carboxylate groups, and the number of POE side chains in the macromolecule. Studies of the effect of DHGC on the stability of aqueous calcium carbonate (CaCO₃) suspensions and on the shape and size of the CaCO₃ crystals formed in the presence of DHGC allowed us to draw some conclusions concerning the effect of the structure of DHGC on their efficiency as modifiers of the processes occurring at the interphase between inorganic particles and the surrounding aqueous phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1189–1197, 2004     

Radical copolymerization of cyclic diarsine with vinyl monomers

1,2,4,5‐Tetramethyltetrahydrodiarsenine ( 1 ), a cyclic diarsine compound, was stirred with styrene and a catalytic amount of 2,2′‐azobisisobutyronitrile (AIBN) as a radical initiator at 80 °C for 8 h in toluene to give a copolymer containing arsenic atoms in the backbone. The gel permeation chromatography (GPC) chromatogram of the copolymer showed a single peak. The number‐average molecular weight of the copolymer was estimated to be more than 10,000 by GPC analysis (CHCl₃, polystyrene standards). The structure of the copolymer was confirmed by the ¹H NMR and ¹³C NMR spectra. According to the integral ratio of peaks in the ¹H‐NMR spectrum, the content of 1 in the copolymer was smaller compared to the monomer feed ratio of 1 . Radical copolymerization of 1 with methyl methacrylate also provided the corresponding copolymer in the presence of AIBN, whereas copolymerization with vinyl acetate yielded no polymeric material. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3023–3028, 2004