The influence of casting parameters on the surface morphology of PS‐b‐P4VP honeycomb films

The “breath figures” method provides an efficient and cost‐effective method to produce highly ordered honeycomb patterns in polymeric films at micrometer and sub‐micrometer dimensions. The size and regularity of the pores can be adjusted through a series of physical and chemical parameters. In this study, amphiphilic diblock copolymers, polystyrene‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) with different lengths of P4VP, were synthesized through Reversible Addition‐Fragmentation Chain Transfer polymerization. The honeycomb‐patterned films were prepared from these well‐defined polymers through the dynamic breath figures method. A series of physical parameters including solution concentration, flow rate, humidity of the flow, and the humidity of the casting environment, were delicately adjusted to systematically investigate their effects on the morphology of the films. These studies identified four key factors which were found to influence the formation of the pattern. No obvious effect was found on the pore size by changing the length of P4VP block. The result provides clear direction on the fabrication of PS‐b‐P4VP honeycomb‐patterned films and more broadly contributes a deeper understanding of the processes involved in the formation of honeycomb patterns. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3721–3732     

Composite ultrafiltration membranes with tunable properties based on a self‐assembling block copolymer/homopolymer system

Composite ultrafiltration membranes were fabricated by coating a thin film of self‐assembling polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers and poly(acrylic acid) homopolymers on top of a support membrane. Block copolymers self‐assembled into a nanostructure where the minority component forms cylinders, whereas homopolymers reside in the core of the cylinders. Selective removal of the homopolymers led to the formation of pores. The morphology of the polymer layer was controlled by varying the content of homopolymers or polymer concentration of the coating solution, which led to membranes with different molecular weight cutoffs (MWCOs) and permeabilities. Uniform pores were obtained using low homopolymer contents, whereas high homopolymer contents caused macrophase separation and resulted in large polydisperse pores or craters at the surface. The thickness of the block copolymer film also influenced the structure and performance of the membranes, where a thicker film results in a strong decrease in permeability but a lower MWCO. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1546–1558     

Synthesis via ATRP,kinetics study and characterization (molecular‐morphological) of 3‐Arm star diblock copolymers of the (PS‐b‐P2VP)3 type

The synthesis of five homopolymers (PS)₃ and the corresponding diblock copolymer 3‐arm stars of the (PS‐b‐P2VP)₃ type is reported through atom transfer radical polymerization. Such star homo‐ and copolymers are prepared without any addition of solvent (bulk polymerization). The kinetics study results lead to the ability of predicting the best polymerization time with high values of monomer to polymer conversion, sufficient polydispersity indices and average molecular weights. Molecular characterization through size exclusion chromatography, viscometry, low‐angle laser light scattering, proton and carbon nuclear magnetic resonance spectroscopy (¹H NMR and ¹³C NMR, respectively) verified the successful synthesis of both homopolymer and copolymer 3‐arm star‐like architectures. Furthermore, the morphological characterization of the final copolymers is reported through transmission electron microscopy studies verifying the self‐assembly without any indication of homopolymer or Cu(I) traces. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 23–32     

Selective swelling induced pore generation of amphiphilic block copolymers: The role of swelling agents

Swelling of block copolymers by selective solvents has emerged as an extremely simple and efficient process to produce nanoporous materials with well‐controlled porosities. However, the role of the swelling agents in this pore‐making process remains to be elucidated. Here we investigate the evolution of morphology, thickness, and surface chemistry of thin films of polystyrene‐block‐poly (2‐vinyl pyridine) (PS‐b‐P2VP) soaked in a series of alcohols with changing carbon atoms and hydroxyl groups in their molecules. It is found that, in addition to a strong affinity to the dispersed P2VP microdomains, the swelling agents should also have a moderate swelling effect to PS to allow appropriate plastic deformation of the PS matrix. Monohydric alcohols with longer aliphatic chains exhibit stronger ability to induce the pore formation and a remarkable increase in film thickness is associated with the pore formation. High‐carbon alcohols including n‐propanol, n‐butanol, and n‐hexanol produce cylindrical micelles upon prolonged exposure for their strong affinity toward the PS matrix. In contrast, methanol and polyhydric alcohols including glycol and glycerol show very limited effect to swell the copolymer films as their affinity to the PS matrix is low; however, they also evidently induce the surface segregation of P2VP blocks. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 926–933     

Synthesis and self‐assembly of thermosensitive double‐hydrophilic poly(N‐vinylcaprolactam)‐b‐poly(N‐vinyl‐2‐pyrrolidone) diblock copolymers

We report on novel diblock copolymers of poly(N‐vinylcaprolactam) (PVCL) and poly(N‐vinyl‐2‐pyrrolidone) (PVPON) (PVCL‐b‐PVPON) with well‐defined block lengths synthesized by the MADIX/reversible addition‐fragmentation chain transfer (RAFT) process. We show that the lower critical solution temperatures (LCST) of the block copolymers are controllable over the length of PVCL and PVPON segments. All of the diblock copolymers dissolve molecularly in aqueous solutions when the temperature is below the LCST and form spherical micellar or vesicular morphologies when temperature is raised above the LCST. The size of the self‐assembled structures is controlled by the molar ratio of PVCL and PVPON segments. The synthesized homopolymers and diblock copolymers are demonstrated to be nontoxic at 0.1–1 mg mL^?1 concentrations when incubated with HeLa and HEK293 cancer cells for various incubation times and have potential as nanovehicles for drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2725–2737     

Highly ordered nanoporous thin films by blending of PSt‐b‐PMMA block copolymers and PEO additives as structure directing agents

Herein, we present a simple method for producing nanoporous templates with a high degree of lateral ordering by self‐assembly of block copolymers. A key feature of this approach is control of the orientation of polymeric microdomains through the use of hydrophilic additives as structure directing agents. Incorporation of hydrophilic poly(ethylene oxide) (PEO) moieties into poly(styrene‐b‐methyl methacrylate) (PSt‐b‐PMMA) diblock copolymers gives vertical alignment of PMMA cylinders on the substrate after solvent annealing. Because of the miscibility between PEO and PMMA, PEO additives were selectively positioned within PMMA microdomains and by controlling the processing conditions, it was found that ordering of PSt‐b‐PMMA diblock copolymers could be achieved. The perpendicular orientation of PMMA cylinders was achieved by increasing the molecular size of the PEO additives leading to an increased hydrophilicity of the PMMA domains and consequently to control the orientation of microdomains in PSt‐b‐PMMA block copolymer thin films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8041–8048, 2008     

Styrene‐vinyl pyridine diblock copolymers: Achieving high molecular weights by the combination of anionic and reversible addition–fragmentation chain transfer polymerizations

Anionic and reversible addition–fragmentation chain transfer (RAFT) polymerizations were combined for the preparation of high molecular weight (MW) amphiphilic diblock copolymers based on the hydrophobic styrene (Sty) and the more polar 2‐vinyl pyridine (2VPy) or 4‐vinyl pyridine (4VPy). In particular, four amphiphilic Sty‐VPy diblock copolymers with MWs up to 271,000 g mol^–1 were prepared. For the polymer synthesis, first, living anionic polymerization of Sty using sec‐butyl‐lithium as initiator in tetrahydrofuran at ?70 °C, followed by termination with ethylene oxide were employed for the preparation of OH‐functionalized homopolyStys. Subsequently, a modification of the OH‐terminal group was performed by the attachment of a 4‐cyanopentanoic acid dithiobenzoate chain transfer agent (CTA) group, giving a polySty macroRAFT CTA, which was extended with 2VPy or 4VPy units using RAFT polymerization. Thus, the prepared diblock copolymers comprised a first block which was near‐monodisperse in size, and a second more heterogeneous block. All diblock copolymers were characterized in terms of their MWs and compositions by gel permeation chromatography and ¹H NMR spectroscopy, respectively, giving results close to the theoretically expected values. Films cast from chloroform solutions of the diblock copolymers were investigated in terms of their bulk morphologies using transmission electron microscopy, which indicated that the minority block consistently formed the discontinuous microphase, spherical or cylindrical. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Control of self‐organized low‐dimensional morphology in poly(styrene‐b‐4vinylpyridine)/polystyrene blend thin films

The surface morphologies of poly(styrene‐b‐4vinylpyridine) (PS‐b‐P4VP) diblock copolymer and homopolystyrene (hPS) binary blend thin films were investigated by atomic force microscopy as a function of total volume fraction of PS (?_PS) in the mixture. It was found that when hPS was added into symmetric PS‐b‐P4VP diblock copolymers, the surface morphology of this diblock copolymer was changed to a certain degree. With ?_PS increasing at first, hPS was solubilized into the corresponding domains of block copolymer and formed cylinders. Moreover, the more solubilized the hPS, the more cylinders exist. However, when the limit was reached, excessive hPS tended to separate from the domains independently instead of solubilizing into the corresponding domains any longer, that is, a macrophase separation occurred. A model describing transitions of these morphologies with an increase in ?_PS is proposed. The effect of composition on the phase morphology of blend films when graphite is used as a substrate is also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3496–3504, 2004     

Competitive hydrogen bonding and self‐assembly in poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate)/poly(hydroxyether of bisphenol A) blends

Blends of poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate) (P2VP‐b‐PMMA) and poly(hydroxyether of bisphenol A) (phenoxy) were prepared by solvent casting from chloroform solution. The specific interactions, phase behavior and nanostructure morphologies of these blends were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this block copolymer/homopolymer blend system, it is established that competitive hydrogen bonding exists as both blocks of the P2VP‐b‐PMMA are capable of forming intermolecular hydrogen bonds with phenoxy. It was observed that the interaction between phenoxy and P2VP is stronger than that between phenoxy and PMMA. This imbalance in the intermolecular interactions and the repulsions between the two blocks of the diblock copolymer lead to a variety of phase morphologies. At low phenoxy concentration, spherical micelles are observed. As the concentration increases, PMMA begins to interact with phenoxy, leading to the changes of morphology from spherical to wormlike micelles and finally forms a homogenous system. A model is proposed to describe the self‐assembled nanostructures of the P2VP‐b‐PMMA/phenoxy blends, and the competitive hydrogen bonding is responsible for the morphological changes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1894–1905, 2009     

Poly[(sodium sulfamate/carboxylate)isoprene‐b‐2‐vinyl pyridine] block polyampholytes: Synthesis and self‐assembly in aqueous media

We report on the synthesis of poly[(sodium sulfamate/carboxylate) isoprene‐b‐2‐vinyl pyridine] block polyampholytes (SCPI‐P2VP), utilizing anionic polymerization and post polymerization functionalization reactions. The precursor poly(isoprene‐b‐(2‐vinylpyridine)) diblock copolymers (PI‐P2VP), containing a polyisoprene (PI) block with high 1,4 microstructure, were prepared by anionic polymerization high vacuum techniques, in two steps, involving change of the polymerization solvent. Subsequent functionalization of the PI block with chlorosulfonyl isocyanate, introduced sulfamate and carboxylate groups in the polymer chains and produced the desired block polyampholytes. The successful synthesis of the polyampolytes was corroborated by elemental analysis and IR spectroscopy measurements. The self‐assembly behaviour of the aforementioned polyampholytes was studied in aqueous solutions as a function of pH, by aid of dynamic and static light scattering, zeta potential, fluorescence spectroscopy and atomic force microscopy. Experimental results indicate that the block polyampholytes form micellar structures with P2VP cores and SCPI coronas at pH > 6, whereas more compact nanoparticles are formed at pH < 4 from the complexation of positively charged P2VP and SCPI, stabilized by excess negative charges of uncomplexed SCI segments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Graphoepitaxial assembly of cylinder forming block copolymers in cylindrical holes

The graphoepitaxial assembly of cylinder‐forming block copolymers assembled into holes is investigated through theoretically informed coarse grained Monte Carlo simulations (TICG MC). The aim is to identify conditions leading to assembly of cylinders that span the entire thickness of the holes, thereby enabling applications in lithography. Three hole geometries are considered, including cylinders, elliptical cylinders, and capsule‐shaped holes. Four distinct morphologies of cylinder forming poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) block copolymers are observed in cylinders and elliptical holes, including cylinders, spheres, partial cylinders, and wall‐bound cylinders. Additional morphologies are observed in capsule‐shaped holes. PMMA cylinders that extend through the entire hole are found with PMMA‐wetting surfaces; a weak wetting condition is needed on the bottom of the hole and a strong wetting condition is necessary on the sides of the hole. Simulated are also used to explore the morphologies that arise when holes are overfilled, or when PMMA homopolymers are added in blends with copolymers. We find that overfilling can alter considerably the morphological behavior of copolymers in cylinders and, for blends; we find that when the homopolymer concentration is >10%, the range of conditions for formation of PMMA cylinders that extend through the entire hole is increased. In general, results from simulations (TICG) are shown to be comparable to those of self‐consistent (SCFT) calculations, except for conditions where fluctuations become important. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 430–441     

Light‐driven and aggregation‐induced emission from side‐chain azoindazole polymers

The well‐defined azoindazole‐containing homopolymer, poly(6‐{6‐[(4‐dimethylamino) phenylazo]‐indazole}‐hexyl methacrylate) (PDHMA), and amphiphilic diblock copolymer, poly({6‐[6‐(4‐dimethylamino)phenylazo]‐indazole}‐hexyl methacrylate)‐b‐poly(2‐(dimethylamino)ethylmethacrylate) (PDHMA_m‐b‐PDMAEMA_n), were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The homopolymer and amphiphilic diblock copolymer in CH₂Cl₂ exhibited intense fluorescence emission accompanied by trans–cis photoisomerization of azoindazole group under UV irradiation. The experiment results indicated that the intense fluorescence emission may be attributed to an inhibition of photoinduced electron transfer of the cis form of azoindazole. On the other hand, the intense fluorescence emission of amphiphilic diblock copolymers in water‐tetrahydrofuran mixture was observed, which increased with the volume ratio of water in the mixed solvent. The self‐aggregation behaviors of three amphiphilic diblock copolymers were examined by transmission electron microscopy, laser light scattering, and UV–vis spectra. The restriction of intramolecular rotation of the azoindazole groups in aggregates was considered as the main cause of aggregation‐induced fluorescence emission. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Complex micelles formed from two diblock copolymers for applications in controlled drug release

Double‐responsive core‐shell‐corona complex micelles for applications in drug release were formed from self‐assembly of two diblock copolymers PtBA‐b‐ PNIPAM and PtBA‐b‐P4VP. The two diblock copolymers coaggregated into core‐shell complex micelles in acidic water with the hydrophobic PtBA blocks as the common core and soluble PNIPAM/P4VP blocks as the mixed shell. Increasing temperature or pH value, the micelles converted into core‐shell‐corona micelles because of the collapse of PNIPAM or P4VP blocks as the inner shell and soluble P4VP or PNIPAM chains stretching outside as the outer corona. The anti‐inflammation drug naproxen (NAP) was loaded as the model drug in micelles in acidic water and released because of the ionization of NAP in alkaline solutions. Compared with pure core‐shell micelles, release of NAP from core‐shell‐corona complex micelles avoided the burst diffusion and the release rate is more easily controlled by tuning the composition of the mixtures or by adjusting the pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1804–1810, 2009     

Reversible addition–fragmentation chain transfer synthesis of amidine‐based,CO2‐responsive homo and AB diblock (Co)polymers comprised of histamine and their gas‐triggered self‐assembly in water

Well‐defined homopolymers of pentafluorophenyl acrylate (PFPA) and AB diblock copolymers of N,N‐dimethylacrylamide (DMA) and poly(ethylene glycol) methyl ether acrylate (PEGA) with PFPA were prepared by reversible addition–fragmentation chain transfer (RAFT) radical polymerization. Three PFPA homopolymers of different molecular weights were reacted with the commercially available amidine and guanidine species histamine (HIS) dihydrochloride and L ‐arginine methyl ester (ARG) dihydrochloride in the presence of S‐methyl methanethiosulfonate to yield, quantitatively, the corresponding amidine and guanidine‐based acrylamido homopolymers. Both the HIS and ARG homopolymers are known to reversibly bind CO₂ with, in the case of the former, CO₂ fixation being accompanied with a switch from a hydrophobic to hydrophilic state. The RAFT synthesis of PFPA‐DMA and PEGA‐PFPA diblock copolymers yielded well‐defined materials with a range of molar compositions. These precursor materials were converted to the corresponding HIS and ARG block copolymers whose structure was confirmed using ¹H NMR spectroscopy. Employing a combination of dynamic light scattering and transmission electron microscopy, we demonstrate that the DMA‐HIS and PEGA‐HIS diblock copolymers are able to undergo reversible and cyclable self‐directed assembly in aqueous media using CO₂ and N₂ as the triggers between fully hydrophilic and amphiphilic (assembled) states. For example, in the case of the 54:46 DMA‐HIS diblock, aggregates with hydrodynamic diameters of about 40.0 nm are readily formed from the molecularly dissolved state. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Formylated polystyrene for the fabrication of pore selective aldehyde group functionalized honeycomb patterned porous polystyrene films

Formylated polystyrene (PS‐CHO) was synthesized by chemical modification of polystyrene (PS) for the fabrication of honeycomb patterned (HCP) porous PS films with aldehyde group functionalized pores via breath figure method under humid conditions. The incorporation of hydrophilic aldehyde group affected the hydrophobicity of PS solution and assisted the self‐assembly of PS‐CHO toward pore. The presence of aldehyde groups in the films were proved by the post treatment with Tollens's reagent, which results in silver decoration at pores. The morphology of the films before and after silver decoration was studied by scanning electron microscopy analysis. The pore selectively self‐assembled aldehyde groups in the patterned porous films can have many applications as a reactive substrate in biomaterials and chemical moieties adhesion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1181–1192     

Synthesis of poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) amphiphilic coil‐rod block copolymer by anionic polymerization

A well‐defined amphiphilic coil‐rod block copolymer, poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) (P2VP‐b‐PHIC), was synthesized with quantitative yields by anionic polymerization. A low reactive one‐directional initiator, potassium diphenyl methane (DPM‐K), was very effective in polymerizing 2‐vinyl pyridine (2VP) without side reactions, leading to perfect control over molecular weight and molecular weight distribution over a broad range of initiator and monomer concentration. Copolymerization of 2VP with n‐hexyl isocyanate (HIC) was carried out in the presence of sodium tetraphenyl borate (NaBPh₄) to prevent backbiting reactions during isocyanate polymerization. Terminating the living end with a suitable end‐capping agent resulted in a P2VP‐b‐PHIC coil‐rod block copolymer with controlled molecular weight and narrow molecular weight distribution. Cast film from a chloroform solution of P2VP‐b‐PHIC displayed microphase separation, characteristic of coil‐rod block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 607–615, 2005     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006