Living regioselective copolymerization of ethylene with nonconjugated bicyclic dienes using (salicylaldiminato)(β‐enaminoketonato) titanium catalysts

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐^tBu‐2‐OC₆H₃CH?N(C₆F₅)] [PhN?C(CF₃)CHCRO]TiCl₂ [ 3a : R = Ph, 3b : R = C₆H₄Cl(p), 3c : R = C₆H₄OMe(p), 3d : R = C₆H₄Me(p), 3e : R = C₆H₄Me(o)] were synthesized and characterized. Molecular structures of 3b and 3c were further confirmed by X‐ray crystallographic analyses. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts displayed favorable ability to incorporate 5‐vinyl‐2‐norbornene (VNB) and 5‐ethylidene‐2‐norbornene (ENB) into the polymer chains, affording high‐molecular weight copolymers with high‐comonomer incorporations and alternating sequence under the mild conditions. The comonomer concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resultant copolymer. At initial comonomer concentration of higher than 0.4 mol/L, the titanium complexes with electron‐donating groups in the β‐enaminoketonato moiety mediated room‐temperature living ethylene/VNB or ENB copolymerizations. Polymerization results coupled with density functional theory calculations suggested that the highly controlled living copolymerization is probably a consequence of the difficulty in chain transfer of VNB (or ENB)‐last‐inserted species and some characteristics of living ethylene polymerization under limited conditions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

1,1,1,1-Tetrakis(o-fluorophenylamino)silane tris[titanium(IV) chloride]. Evidence for a new titanium cation [Ti2Cl7]+

Si(NHC₆H₄F-o)₄ · 3TiCl₄ (1) has been obtained from the disproportionation of (CF₃CH₂O)₃SiNHC₆H₄F-o and TiCl₄ in petroleum ether (40–60 °C) at –10 °C. The analytical (elemental analysis, molar conductance) and spectral (i.r., ¹H- and ¹⁹F-n.m.r.) data suggested that (1) behaves as [Si(NHC₆H₄F-o)₄ · Ti₂Cl₇]⁺ [TiCl₅]^–. The presence of these ions has been confirmed by characterising the products of metathetical reactions of (1) with R₄NX (R = Bu and Et; X = I and Br) and with AgNO₃. The data suggest the presence of a new titanium cation [Ti₂Cl₇]⁺.     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Direct Synthesis of Titanium Complexes with Chelating cis‐9,10‐Dihydrophenanthrenediamide Ligands through Sequential C?C Bond‐Forming Reactions from o‐Metalated Arylimines

A series of new titanium(IV) complexes with o‐metalated arylimine and/or cis‐9,10‐dihydrophenanthrenediamide ligands, [o‐C₆H₄(CH?NR)TiCl₃] (R=2,6‐iPr₂C₆H₃ ( 3 a ), 2,6‐Me₂C₆H₃ ( 3 b ), tBu ( 3 c )), [cis‐9,10‐PhenH₂(NR)₂TiCl₂] (PhenH₂=9,10‐dihydrophenanthrene; R=2,6‐iPr₂C₆H₃ ( 4 a ), 2,6‐Me₂C₆H₃ ( 4 b ), tBu ( 4 c )), [{cis‐9,10‐PhenH₂(NR)₂}{o‐C₆H₄(HC?NR)}TiCl] (R=2,6‐iPr₂C₆H₃ ( 5 a ), 2,6‐Me₂C₆H₃ ( 5 b ), tBu ( 5 c )), have been synthesised from the reactions of TiCl₄ with o‐C₆H₄(CH?NR)Li (R=2,6‐iPr₂C₆H₃, 2,6‐Me₂C₆H₃, tBu). Complexes 4 and 5 were formed unexpectedly from the reactions of TiCl₄ with two or three equivalents of the corresponding o‐C₆H₄(CH?NR)Li followed by sequential intramolecular C? C bond‐forming reductive elimination and oxidative coupling reactions. Attempts to isolate the intermediates, [{o‐C₆H₄(CH?NR)}₂TiCl₂] ( 2 ), were unsuccessful. All complexes were characterised by ¹H and ¹³C NMR spectroscopy, and the molecular structures of 3 a , 4 a – c , 5 a , and 5 c were determined by X‐ray crystallography.     

Highly active titanium(IV) dichloride FI catalysts bearing a diallylamino group for the synthesis of disentangled UHMWPE

A family of 16 salicylaldarylimine titanium(IV) dichloride complexes bearing diallylamino group, namely {2‐[3‐ or 4‐(CH₂?CH? CH₂)₂NC₆H₄N?CH]‐6‐R¹‐4‐R²‐C₆H₂O}₂TiCl₂ (R¹ = t‐Bu, CMe₂(Ph); R² = H, Me, OMe, t‐Bu) have been used for polymerization of ethylene in the presence of methylaluminoxane. The effects of reaction conditions on the polymerization were examined in detail. All the pre‐catalyst are highly active (up to 14.0 × 10⁶ g_(PE) mol_(Ti)^{?1 ?1} h^?1) for ethylene polymerization at 30°С to 60°С with the activities and MM correlating with the R¹‐substituent type and position of NAll₂‐group: CMe₂(Ph) > t‐Bu and meta‐NAll₂ > para‐NAll₂ for any R². Highly linear polyethylenes (T_m's as high as 141.0°С) can be obtained with high molecular weights in the range 0.70 to 4.10 × 10⁶ g mol^?1 with disentangled morphology, suitable for technologically more advanced and greeny way to produce high‐modulus high‐strength fibers of ultrahigh molecular weight polyethylene via solid‐state (solvent‐free) deformation processing.     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Synthesis and Reactivity of Boron‐, Silicon‐, and Tin‐Bridged ansa‐Cyclopentadienyl–Cycloheptatrienyl Titanium Complexes (Troticenophanes)

A novel one‐pot method was developed for the preparation of [Ti(η⁵‐C₅H₅)(η⁷‐C₇H₇)] (troticene, 1 ) by reaction of sodium cyclopentadienide (NaCp) with [TiCl₄(thf)₂], followed by reduction of the intermediate [(η⁵‐C₅H₅)₂TiCl₂] with magnesium in the presence of cycloheptatriene (C₇H₈). The [n]troticenophanes 3 (n=1), 4 , 8 , 10 (n=2), and 11 (n=3) were synthesized by salt elimination reactions between dilithiated troticene, [Ti(η⁵‐C₅H₄Li)(η⁷‐C₇H₆Li)] ? pmdta ( 2 ) (pmdta=N,N′,N′,N′′,N′′‐pentamethyldiethylenetriamine), and the appropriate organoelement dichlorides Cl₂Sn(Mes)₂ (Mes=2,4,6‐trimethylphenyl), Cl₂Sn₂(tBu)₄, Cl₂B₂(NMe₂)₂, Cl₂Si₂Me₄, and (ClSiMe₂)₂CH₂, respectively. Their structural characterization was carried out by single‐crystal X‐ray diffraction and multinuclear NMR spectroscopy. The stanna[1]‐ and stanna[2]troticenophanes 3 and 4 represent the first heteroleptic sandwich complexes bearing Sn atoms in the ansa bridge. The reaction of 3 with [Pt(PEt₃)₃] resulted in regioselective insertion of the [Pt(PEt₃)₂] fragment into the Sn? C_ipso bond between the tin atom and the seven‐membered ring, which afforded the platinastanna[2]troticenophane 5 . Oxidative addition was also observed upon treatment of 4 with elemental sulfur or selenium, to produce the [3]troticenophanes [Ti(η⁵‐C₅H₄SntBu₂)(η⁷‐C₇H₆SntBu₂)E] ( 6 : E=S; 7 : E=Se). The B? B bond of the bora[2]troticenophane 8 was readily cleaved by reaction with [Pt(PEt₃)₃] to form the corresponding oxidative addition product [Ti(η⁵‐C₅H₄BNMe₂)(η⁷‐C₇H₆BNMe₂)Pt(PEt₃)₂] ( 9 ). The solid‐state structures of compounds 5 , 6 , and 9 were also determined by single‐crystal X‐ray diffraction.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

The synthesis,structure, and ethylene polymerization of dimeric salicylaldiminato titanium complexes

A series of dimeric titanium complexes bearing salicylaldiminates, [4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OTiCl₂(µ-Cl)]₂ [R?=?H (1); R?=?^tBu (2); R?=?NO₂ (3)], have been synthesized in high yield (>90%) by the reaction of corresponding 4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OSiMe₃ with TiCl₄. The molecular structure of 2 has been confirmed by single-crystal X-ray diffraction analysis. When activated with methylaluminoxane, these complexes exhibit good catalytic activity for ethylene polymerization.     

Studies on the synthesis,spectra and structure of isomerized products of isopentadiene(dicarbonyl)-[ethoxy(aryl)carbene]iron complexes and the crystal structure of tetracarbonyl[ethoxy-(pentachlorophenyl)carbene]iron

Reaction of π-isopentadienetricarbonyliron (1) with aryl lithium ArLi (Ar?phenyl, p-tolyl, p-methoxyphenyl, p-trifluoromethylphenyl) in ether at low temperature, and subsequent alkylation of the acylmetallate formed with triethyloxonium tetrafluoroborate[(C₂H₅)₃OBF₄] in aqueous solution at 0°C, gave orange-red crystalline complexes (2-5), the isomerized products of isopentadiene (dicarbonyl) [ethoxy(aryl)carbene] iron with composition of C₅H₈ (CO)₂FeC(OC₂H₅)Ar When LiC₆Cl₅ was used as nucleophilic reagent in the reaction, on alkylation of the afforded acylmetallate intermediate under some reaction conditions, complex (CO)₄FeC(OC₂H₅)C₆Cl₅ (6) was obtained. The molecular structure of complexes 2 and 6 were determined by means of single crystal X-ray diffraction measurements. IR, ¹H NMR and mass spectra of these complexes were investigated.     

Sigma‐ versus Pi‐Koordination in Bis‐indenyl‐ und Bis‐2‐methallyl‐Imidokomplexen des sechswertigen Molybdäns und Wolframs: DF‐Rechnungen und Kristallstrukturanalyse

Sigma‐ versus Pi‐Coordination in Bis‐indenyl‐ and Bis‐2‐methallyl Imido Complexes of Hexavalent Molybdenum and Tungsten: DF‐Calculations and Crystal Structure Analysis Bis‐indenyl and bis‐2‐methallyl imido complexes [(C₉H₇)₂M(NR)₂] (M = Mo, W; R = tert‐butyl, mesityl) 1 — 4 and [(H₃C‐C₃H₄)₂M(NtBu)₂] (M = Mo, W) 6 , 7 have been prepared starting from [Mo(NtBu)₂Cl₂] or [M(NR)₂Cl₂L₂] (M = W, R = tBu, L = py; M = Mo, W, R = Mes, L₂ = dme) and indenyl lithium or 2‐methallyl magnesium bromide, respectively. According to spectroscopic data and the crystal structure of 4 there are two different coordination modes of the indenyl ligands, [(η³‐C₉H₇)M(NR)₂(η¹‐C₉H₇)], in solution as well as in the solid state. These compounds show fluxional rearrangements in solution, namely σ, π‐exchange of η¹‐ and η³‐coordinated ligands. Similar behavior has been observed for the 2‐methallyl complexes 6 and 7 in solution. In agreement with experimental observations, DF calculations on models of 6 strongly suggest a (σ+π)‐coordination mode of the η³‐coordinated ligand.     

Titanium complexes with sulfur‐linked bis(phenolate) ligands

High‐quality crystals of two bis(phenolate)titanium complexes, namely dichlorido{4,4′‐dimethyl‐2,2′‐[cyclohexane‐1,2‐diylbis(sulfanediyl)]diphenolato}titanium(IV), [Ti(C₂₀H₂₂O₂S₂)Cl₂], (I), and dichlorido{2,2′‐[cyclohexane‐1,2‐diylbis(sulfanediyl)]diphenolato}titanium(IV), [Ti(C₁₈H₁₈O₂S₂)Cl₂], (II), were obtained by reactive crystallization. Depending on the solvent, compound (II) was obtained as unsolvated (IIa) or as the toluene hemisolvate, [Ti(C₁₈H₁₈O₂S₂)Cl₂]·0.5C₇H₈, (IIb). These systems without bulky substituents on the aromatic phenolate rings serve as ideal model compounds for precatalysts. The excellent X‐ray diffraction data will help clarify the nature of the mismatched interactions between the soft S atoms within the ligand and the hard titanium center. Molecule (I) has crystallographic C₂ symmetry.     

Synthesis and Structures of ansa‐Titanocene Complexes with Diatomic Bridging Units for Overall Water Splitting

The synthesis of a series of ansa‐titanocene dichlorides [Cp′₂TiCl₂] (Cp′=bridged η⁵‐tetramethylcyclopentadienyl) and the corresponding titanocene bis(trimethylsilyl)acetylene complexes [Cp′₂Ti(η²‐Me₃SiC₂SiMe₃)] is described. The ethanediyl‐bridged complexes [C₂H₄(C₅Me₄)₂TiCl₂] ( 2 ‐Cl₂) and [C₂H₄(C₅Me₄)₂Ti(η²‐Me₃SiC₂SiMe₃)] ( 2‐ btmsa; btmsa=η²‐Me₃SiC₂SiMe₃) can be obtained from the hitherto unknown calcocenophane complex [C₂H₄(C₅Me₄)₂Ca(THF)₂] ( 1 ). Furthermore, a heterodiatomic bridging unit containing both, a dimethylsilyl and a methylene group was introduced to yield the ansa‐titanocene dichloride [Me₂SiCH₂(C₅Me₄)₂TiCl₂] ( 3 ‐Cl₂) and the bis(trimethylsilyl)acetylene complex [Me₂SiCH₂(C₅Me₄)₂Ti(η²‐Me₃SiC₂SiMe₃)] ( 3 ‐btmsa). Besides, tetramethyldisilyl‐ and dimethylsilyl‐bridged metallocene complexes (structural motif 4 and 5 , respectively) were prepared. All ansa‐titanocene alkyne complexes were reacted with stoichiometric amounts of water; the hydrolysis products were isolated as model complexes for the investigation of the elemental steps of overall water splitting. Compounds 1 , 2 ‐btmsa, 2 ‐(OH)₂, 3 ‐Cl₂, 3 ‐btmsa, 4 ‐(OH)₂, 3 ‐alkenyl and 5 ‐alkenyl were characterised by X‐ray diffraction analysis.     

Copolymerization of 2‐butene and ethylene with catalysts based on titanium and zirconium complexes

The polymerization of 2‐butene and its copolymerization with ethylene have been investigated using four kinds of dichlorobis(β‐diketonato)titanium complexes, [ArN(CH₂)₃NAr]TiCl₂ (Ar = 2,6‐ⁱPr₂C₆H₃) and typical metallocene catalysts. The obtained copolymers display lower melting points than those produced of homopolyethylene under the same polymerization conditions. ¹³C NMR analysis indicates that 9.3 mol‐% of 2‐butene units were incorporated into the polymer chains with Ti(BFA)₂Cl₂‐MAO as the catalyst system. With the trans‐2‐butene a higher copolymerization rate was observed than with cis‐2‐butene. A highly regioselective catalyst system for propene polymerization, [ArN(CH₂)₃NAr]TiCl₂ complex using a mixture of triisobutylaluminium and Ph₃CB(C₆F₅)₄ as cocatalyst, was found to copolymerize a mixture of 1‐butene and trans‐2‐butene with ethylene up to 3.1 mol‐%. Monomer isomerization‐polymerization proceeds with typical metallocene catalysts to produce copolymers consisting of ethylene and 1‐butene.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Cation‐Mediated Conversion of the State of Charge in Uranium Arene Inverted‐Sandwich Complexes

Two new arene inverted‐sandwich complexes of uranium supported by siloxide ancillary ligands [K{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 3 ) and [K₂{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 4 ) were synthesized by the reduction of the parent arene‐bridged complex [{U(OSi(OtBu)₃)₃}₂(μ‐η⁶:η⁶‐C₇H₈)] ( 2 ) with stoichiometric amounts of KC₈ yielding a rare family of inverted‐sandwich complexes in three states of charge. The structural data and computational studies of the electronic structure are in agreement with the presence of high‐valent uranium centers bridged by a reduced tetra‐anionic toluene with the best formulation being U^V–(arene^4?)–U^V, KU^IV–(arene^4?)–U^V, and K₂U^IV–(arene^4?)–U^IV for complexes 2 , 3 , and 4 respectively. The potassium cations in complexes 3 and 4 are coordinated to the siloxide ligands both in the solid state and in solution. The addition of KOTf (OTf=triflate) to the neutral compound 2 promotes its disproportionation to yield complexes 3 and 4 (depending on the stoichiometry) and the U^IV mononuclear complex [U(OSi(OtBu)₃)₃(OTf)(thf)₂] ( 5 ). This unprecedented reactivity demonstrates the key role of potassium for the stability of these complexes.     

The Reactivity of Isomeric Nitrenium Lewis Acids with Phosphines,Carbenes, and Phosphide

Alkylation of spiro[fluorene-9,3’-indazole] at N(1) and N(2) with tBuCl affords the nitrenium cations [C₆H₄N₂(tBu)C(C₁₂H₈)][BF₄], 1 and 2 , respectively. Compound 1 converts to 2 over the temperature range 303–323 K with a free energy barrier of 28±5 kcal mol⁻¹. Reaction of 1 with PMe₃ afforded the N-bound phosphine adduct [C₆H₄N(tBu)N(PMe₃)C(C₁₂H₈)]BF₄] 3 . However, phosphines attack 2 at the para-carbon atom of the aryl group with concurrent cleavage of N(2)−C(1) bond and proton migration to C(1) affording [(R₃P)C₆H₃NN(tBu)CH(C₁₂H₈)][BF₄] (R=Me 4 , nBu 5 ). Analogous reactions of 1 and 2 with the carbene SIMes prompt attack at the para-carbon with concurrent loss of H^. affording the radical cation salts [(SIMes)C₆H₃N(tBu)NC(C₁₂H₈)^.][BF₄] 6 and [(SIMes)C₆H₃NN(tBu)C(C₁₂H₈)^.][BF₄] 7 , whereas reaction of 2 with BAC gives the Lewis acid-base adduct, [C₆H₄N(BAC)N(tBu)C(C₁₂H₈)][BF₄] 8 . Finally, reactions of 1 and 2 with KPPh₂ result in electron transfer affording (PPh₂)₂ and the persistent radicals C₆H₄N(tBu)NC(C₁₂H₈)^. and C₆H₄NN(tBu)C(C₁₂H₈)^.. The detailed reaction mechanisms are also explored by extensive DFT calculations.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Dinuclear and Mononuclear Platinum(II) and Palladium(II) Complexes with Modified 2,2′‐Dipyridylamine Ligands Featuring a Cisplatin Analogous Structure Motif

In modern cancer therapy the clinical application of platinum‐based drugs is more and more limited by the occurrence of intrinsic or acquired resistances. In this context the potential use of dinuclear platinum complexes in chemotherapy is increasingly relevant. The novel complexes Pd(Bzdpa)Cl₂, Pd₂(C₄H₈(dpa)₂)Cl₄, and Pt₂(C₄H₈(dpa)₂)Cl₄ allow a direct comparison of mono‐ and dinuclear palladium and platinum complexes respectively deriving from a 2,2′‐dipyridylamine (Hdpa) ligand system. They were characterized by single crystal X‐ray analysis as well as infrared spectroscopy and elemental analysis. The cisplatin analogous mononuclear palladium complex Pd(Bzdpa)Cl₂ ( 1 ) (Bzdpa: (2,2′‐dipyridylbenzyl)amine) belongs to a range of 2,2′‐dipyridylamine‐based compounds which were extensively studied in our laboratories. 1 crystallizes in the orthorhombic space group Pna2₁ with a = 13.722(3), b = 13.457(3), c = 9.483(2), V = 1751.1(6) ų, and Z = 4. The metal binding motif of 1 was expanded by a flexible butyl‐linker to form the tetradentate C₄H₈(dpa)₂ ligand. The resulting isotypic dinuclear complexes Pd₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 2 ) and Pt₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 3 ) crystallize in the triclinic space group with a = 7.8427(2), b = 8.7940(2), c = 11.7645 (3), α = 79.219(2)°, β = 84.033(2)°, γ = 87.744(2)°, V = 792.58(3) ų ( 2 ) and a = 7.831(5), b = 8.814(5), c = 11.817(5), α = 79.271(5)°, β = 83.571(5)°, γ = 88.063(5)°, V = 796.3(8) ų ( 3 ), both with one centrosymmetrical molecule in the unit cell.