Efficient synthesis of high molar mass, first- to fourth-generation distributed dendronized polymers by the macromonomer approach

A homologous series of first- to fourth-generation (G1-G4) dendronized macromonomers, 5, 7, 10, and 12, was synthesized, and their polymerization behavior under radical conditions investigated. These conditions were thermally induced radical polymerization (TRP) and atom-transfer radical poymerization (ATRP). TRP was applied to all monomers and gave polymers PG1-PG4, whose molar masses range from several millions for PG1 to estimated several hundreds of thousands for PG2 and PG3, and to the oligomeric regime for PG4. ATRP was applied only to the G1 and G2 monomers 5 and 7. Kinetic studies on monomer 5 provide evidence that its polymerization proceeds in a controlled fashion. The highest monomer-to-initiator ratios which still gave monomodal molar mass distributions were 300:1 (for 5) and 100:1 (for 7), which correspond to achievable molar mass regime for PG1 and PG2 of approximately M(n)=100 000 (DP(calcd)(PG1)=200, DP(calcd)(PG2)=90). The polydispersities lie in the usual range (PDI=1.1-1.2). The molar masses were determined by GPC in DMF with calibration against absolute molar masses of PG1 determined by light scattering.     

Stimuli‐responsive brush‐shaped conjugated polymers with pendant well‐defined poly(vinyl ether)s

For the synthesis of brush‐shaped conjugated polymers consisting of a poly(phenylene butadiynylene) backbone and well‐defined poly(vinyl ether) (polyVE) side chains, we designed polyVE‐based macromonomers bearing a diethynyl benzene group at the terminus and applied them to the grafting through synthesis. The macromonomer (DE‐PIBVE) was synthesized by living cationic polymerization of isobutyl VE (IBVE) using a functionalized initiator (TMS‐DEVE‐TFA) having a TMS protected diethynyl benzene moiety, followed by deprotection of the TMS groups. As a result, we succeeded in the synthesis of the target brush‐shaped conjugated polymers [poly(DE‐PIBVE)] by oxidative coupling reaction of the diethynyl benzene groups. We found that the solution of poly(DE‐PIBVE) with a specific side chain length exhibited solvatochromism and thermochromism depending on the polarity of the media employed. This phenomenon was attributed to self‐assembly in polar media due to the intermolecular π–π interaction between neighboring conjugated polymer backbones, where the self‐assembly behavior would be closely related to the pendant polyVE structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3318–3325     

Doubly dendronized chiral polymers showing thermoresponsive properties

The dendronization of linear polymers by dendrons with different cores and peripheries provides a convenient strategy to fuse distinct properties in one matter. By combining thermoresponsive properties with chirality, a series of doubly dendronized polymers possessing interior chiral proline units and peripheral oligoethylene glycol (OEG)‐based dendrons are synthesized and characterized. The chirality of proline moieties are varied to check potential effects on thermoresponsiveness and chiroptical properties, and the terminal groups in the OEG periphery are changed to tune the hydrophilicity of the resulting polymers. The macromonomer route is applied to obtain polymers with well‐defined structures. Free radical polymerization in bulk results in polymers with surprisingly high molar masses. Their thermally induced phase transition processes are monitored by UV–vis spectroscopy, and chiroptical properties are monitored by optical rotation measurements and circular dichroism spectroscopy. These doubly dendronized polymers show characteristic thermoresponsive behavior, and their phase transition temperatures are dominated by the peripheral structures. Polymerization accompanies weak chiral amplification, but the chirality of the proline interior contributes significantly to the thermal stability of chiroptical properties of the resulting polymers. In vitro cytotoxicity measurements are carried out to check the biocompatibility of these thermoresponsive polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5143–5152     

From linear side-chain functionalized poly(vinyl ether)s to functional macrocycles

This paper deals with the synthesis of functional polymers of controlled chain dimensions and architecture from poly(chloroalky1 vinyl ether)s. The living polymerization of chloroalkyl vinyl ethers initiated by HX/ZnX₂ systems, and the chemical substitution of the pendant chlorines by various organic functions and groups, in order to generate specific polymer properties are first discussed. Also based on the living character of the polymerizations, the preparation of poly(chloroethyl vinyl ether) with monomacrocyclic and plurimacrocyclic architectures as well as their characterization are then reported. Some evidence for specific host–guest interactions between large organic molecules and polymacrocycles is also presented.     

Synthesis,structural, and retrostructural analysis of helical dendronized poly(1‐naphthylacetylene)s

Structural and retrostructural analysis of chiral, nonracemic ( poly [(3,4,5)dm8G1‐1EN] ), and achiral ( poly[(3,4,5)12G1‐1EN] ) poly(1‐naphthylacetylene)s demonstrates new design principles for helical dendronized polyarylacetylenes. The oblate cylindrical dendronized polymers self‐organize in a c2mm centered rectangular columnar (Φ_r‐c) lattice. An all cis‐polyene backbone microstructure with very high cisoid character is introduced to rationalize features from small‐ and wide‐angle X‐ray diffraction experiments. More compact helical conformations are ideal for efficient communication or amplification of chirality over long distances. Peripheral chiral tails select a preferred helical screw sense of the polyene backbone. In solution, the preferred helical conformation persists over a wide temperature range. In bulk, the naphthyl moiety facilitates a longer correlation length for helical order compared to an analogous minidendritic poly(phenylacetylene). These attributes suggest that the naphthyl moiety may be better suited for expressing helical chirality in monolayer domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4974–4987, 2007     

Multiple morphologies from a novel diblock copolymer containing dendronized polymethacrylate and linear poly(ethylene oxide)

A novel amphiphilic diblock copolymer, consisting of dendronized polymethacrylate‐b‐poly(ethylene oxide), was synthesized via atom transfer radical polymerization; from it, micellelike aggregates of various morphologies, prepared under near‐equilibrium conditions, were studied with transmission electron microscopy and scanning electron microscopy. The effects of various factors on the aggregate morphologies of the amphiphilic copolymer, such as the water content, the copolymer concentration, and the type of common solvent, were investigated systematically. The unique architecture of the block copolymer led to morphological variety and peculiarities such as dendritic and shuttle‐shaped aggregates, which could be attributed to the effective packing of the bulky side chains, that is, another driving force for the aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2291–2297, 2005     

Synthesis and solution properties of poly(vinyl ether)s with long alkyl chain,biphenyl, and cholesteryl pendants

The judicious choice of reaction conditions permitted living cationic polymerization of vinyl ethers with bulky and strongly interacting pendant groups, such as crystalline long alkyl chains and liquid crystalline mesogenic structures, using appropriate combinations of Lewis acids with added bases. Thus, well‐defined random and block copolymers with various pendants were also synthesized. Highly sensitive UCST‐type phase separation in various organic solvents was achieved employing crystallization of octadecyl pendants of homopolymers and random copolymers. This phase separation behavior is unusual for a polymer‐organic solvent system. Furthermore, thermally induced reversible physical gelation was conducted using this thermosensitive behavior. These specific pendants were very effective not only in organic media but also in water, in obtaining hydrogels with relatively low polymer concentrations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4392–4406, 2008     

Synthesis of brush‐shaped polymers consisting of a poly(phenylacetylene) backbone and pendant poly(vinyl ether)s via selective reaction of 2‐Vinyloxyethyl 4‐Ethynylbenzoate

We have newly designed an original bifunctional monomer (PAVE) containing both a phenylacetylene (PA) group and a vinyl ether (VE) group, which is expected to be a key material for the synthesis of brush‐shaped polymers consisting of a poly(phenylacetylene) (polyPA) main chain and polyVE side chains. Actually, we have demonstrated the selective chemical transformation of the VE moiety of PAVE to an initiator site for the living cationic polymerization of isobutyl vinyl ether (IBVE), and then succeeded in the controlled synthesis of a novel PA‐end‐capped polyIBVE macromonomer. Moreover, using this macromonomer, the first synthesis of a brush‐shaped polyPA bearing polyVE side chains was achieved via Rh complex‐mediated homopolymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2800–2805     

The controlled homogeneous organic solution polymerization of new hydrophilic cationic exo-7-oxanorbornenes via ROMP with RuCl2(PCy3)2CHPh in a novel 2,2,2-trifluoroethanol/methylenechloride solvent mixture

The authors detail herein the synthesis and controlled polymerization of a series of new permanently cationic ammonium exo-7-oxanorbornene derivatives via ROMP, with the first generation Grubbs' catalyst RuCl₂(PCy₃)₂CHPh, in a novel solvent mixture composed of 1:1 vol/vol 2,2,2-trifluoroethanol (TFE)/methylene chloride. It is demonstrated that this cosolvent mixture is a convenient reaction medium facilitating the polymerization of hydrophilic substrates by hydrophobic initiators under homogeneous conditions. Homopolymerizations and copolymerizations proceed yielding materials with controlled molecular masses, and narrow molecular mass distributions. It is also demonstrated that this protocol is not limited to the use of TFE as a cosolvent and that additional halogenated alcohols, such as 2,2,2-trichloroethanol and 1,1,1,3,3,3-hexafluoroisopropanol are also effective cosolvents for the controlled polymerization of such cationic substrates. Finally, it is demonstrated that the TFE/methylene chloride mixture has no apparent detrimental effect on Grubbs' catalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2113–2128, 2007     

Precise synthesis of end‐functionalized thermosensitive poly(vinyl ether)s by living cationic polymerization

A series of poly(2‐methoxyethyl vinyl ether)s with narrow molecular weight distributions and with perfectly defined end groups of varying hydrophobicities was successfully synthesized by base‐assisting living cationic polymerization. The end group was shown to greatly affect the temperature‐induced phase separation behavior of aqueous solutions (lower critical solution temperature‐type phase separation) or organic solutions (upper critical solution temperature‐type phase separation) of the polymers. The cloud points were also influenced largely by the molecular weight and concentration of the polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of an oligo(ethylene glycol)‐based third‐generation thermoresponsive dendronized polymer

An improved strategy to synthesize oligo(ethylene glycol)‐based secondary generation (G2) dendron is presented. The overall synthesis efficiency increased by 50% when comparing to the previous method, and the product purification by column chromatography becomes much easier. Based on this approach, the synthesis of the third‐generation (G3) dendrons and the corresponding methacrylate‐based G3 macromonomer becomes feasible. Because of the oil characteristics of this macromonomer, its polymerization was able to be conducted in bulk with AIBN as the initiator. The polymerization degree of the third‐generation dendronized polymer ( PG3 ) was found to be around 16 based on GPC measurement. The thermally induced dehydration processes of this polymer were monitored by temperature‐varied proton NMR spectroscopy, and its thermoresponsive behaviors were investigated with turbidity measurements using UV–vis spectroscopy. Similar to the lower generation counterparts, this threefold branched dendronized polymer also shows characteristic fast and sharp phase transitions around its apparent lower critical solution temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6630–6640, 2009     

Water soluble poly(ethylene oxide) functionalized norbornene polymers

The synthesis of three different poly(ethylene oxide) macromonomers with a norbornene and oxanorbornene end group is presented. The macromonomers were polymerized to comb‐polymers by ring‐opening metathesis polymerization (ROMP) using Grubbs' Catalyst G3 to produce water soluble polymers with polydispersities between 1.04 and 1.30 and molecular weights between 14,000 and 50,000 g/mol. Characterization by static and dynamic light scattering reveals that the comb‐polymers with norbornene backbone are molecularly disperse in aqueous solution, while the oxanorbornene‐backbone polymers form small water‐soluble aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2640–2648, 2008     

Gelation properties of poly(aryl ether)dendrons bearing long alkyl chains

Poly(aryl ether) dendrons (2) bearing long alkyl chains can undergo physical gelation in various organic solvents, especially alkanes and alcoholic solvents. In contrast, 3,4,5-trialkoxyphenyl derivatives (1), which are the building blocks of the dendrons (2), do not exhibit any gelation properties; thus, revealing the key role of the dendron structure in the aggregation/gelation process. Hansen solubility parameters allow us to gain a detailed understanding of the role of solvent in gelation. Critical gel concentrations, FT-IR spectroscopy, NMR spectroscopy, T _gel measurements, and scanning electron microscopy are used to characterize the gel structures.     

Synthesis of well-defined norbornenyl-terminated poly(alkyl methacrylate)s by group transfer polymerization and their grafting-through ring-opening metathesis polymerization

Highly efficient syntheses of poly(alkyl methacrylate)-based brush polymers were accomplished via a facile group transfer polymerization (GTP) and a consecutive grafting-through ring-opening metathesis polymerization. The GTP system, composed of the norbornenyl-methyl trimethylsilyl ketene acetal initiator and the N-(trimethylsilyl) bis(trifluoromethanesulfonyl)imide catalyst, rapidly and quantitatively generates norbornenyl-terminated poly(alkyl methacrylate) macromonomers with very narrow polydispersities (M_w/M_n < 1.10). The ring-opening metathesis polymerization of methacrylate macromonomers using Grubbs third generation catalyst successfully generated a group of methacrylate-based brush polymers, which assured the high quality of the macromonomers obtained from GTP.     

Poly(ether sulfone)s using a rigid dibenzothiophene dioxide heterocycle

Poly(aryl ether)s were prepared by nucleophilic aromatic substitution using conformationally restricted dichloro‐ and difluorodibenzothiophene dioxide heterocyclic monomers with bisphenol A or bisphenol AF. The heterocyclic monomers were prepared from the bis(4‐halophenyl) sulfones in two steps via lithiation followed by copper catalyzed intramolecular coupling and characterized by ¹H, ¹³C, ¹⁹F NMR spectroscopy and GC/MS. Reactivity of the fluorine containing monomer was examined using semi‐empirical methods and NMR spectroscopy measurements and found to be potentially more reactive than bis(4‐fluorophenyl) sulfone, even with a conformationally locked sulfone as the electron withdrawing group. Successful polymerizations of both the fluorine and chlorine containing monomers with bisphenol A and bisphenol AF nucleophiles were accomplished, providing polymers with number average molecular weights of approximately 45 kg/mol (difluoro monomer) and 10–20 kg/mol (dichloro monomer). The polymers exhibited high T_gs ranging from 238 to 256 °C and displayed good thermal stability with 5% degradation temperatures in air from 453–510 °C, depending on molecular weight and bisphenol composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3127–3131     

Divergent synthesis and self‐assembly of amphiphilic polymeric dendrons with selective degradable linkages

Enhancing the structural complexity and functionality of the building blocks allows the construction of supramolecular assemblies. In this work, we demonstrate a strategy for the design and synthesis of complex macromolecular architectures. We use atom transfer radical polymerization to produce well‐defined polymers with telechelic end‐group functionality, and “click” them together to form functional 3rd generation dendrons, and incorporated degradable linkages and certain functionality at the polymer chain‐ends of each generation. The 3rd generation polymeric dendrons consisted of homopolymer polystyrene (PSTY) with either four solketals or eight alcohols, diblock PSTY and poly(t‐butyl acrylate), and amphiphilic diblock. The peripheral ends consisting of alcohols create functionalization points for further chemical modification or chemical coupling and the cleavable linkages between the 2nd and 3rd generations all provide the first steps toward smart nanostructures. Importantly, we can synthesize these dendrons in pure form. The self‐assembly of the amphiphilic dendrons (the inner and outer generations consisting of PSTY and polyacrylic acid, respectively) in water produced micelles of uniform size with an aggregation number of 43 dendrons per micelle. The size of the micelles was small (D_H =20.7 nm) and comparable to the size found by transmission electron microscopy (14–18 nm). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1533–1547, 2008     

Synthesis and properties of poly(arylene ether phenyl-s-triazine)s

A series of new poly(arylene ether phenyl-s-triazine)s was prepared by the nucleophilic aromatic substitution polymerization of the potassium salt of bisphenols with 2,4-bis (halophenyl)-6-phenyl-s-triazine in N-methyl-2-pyrrolidone at elevated temperature. The polymers with inherent viscosities exceeding 0.5 were obtained after polymerization for 1 h using 2,4-bis(fluorophenyl)-6-phenyl-s-triazine as a monomer. The glass transition temperatures of the resulting polymers ranged from 200 to 260°C depending on the bisphenol used in the polymer synthesis. The poly(arylene ether phenyl-s-triazine)s demonstrated excellent thermal stabilities in excess of 490°C (5% weight loss in air). The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether phenyl-s-triazine)s belong to the most superior class of heat resistant polymers, such as polyimide Kapton?. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008