Dreiecksdodekaedrische Heterotri‐ und ‐tetrametall‐Eisen–Ruthenium‐Cluster mit CpR‐ und Pn‐Liganden (n = 5, 4)

Triangulated Dodecahedral Heterotrimetallic‐ and ‐tetrametallic Iron–Ruthenium Clusters with Cp^R and P_n Ligands (n = 5, 4) The cothermolysis of [Cp*Fe(η⁵‐P₅)] ( 1 ) and [{Cp″(OC)₂Ru}₂](Ru–Ru) ( 2 ), Cp″ = C₅H₃But₂‐1,3, affords low yields of [Cp″Ru(η⁵‐P₅)] ( 3 ) and [{Cp″Ru}₂P₄] ( 4 ) as well as the triangulated dodecahedral hetero‐ and homotrimetallic clusters [{Cp″Ru}₂{Cp*Fe}P₅] ( 5 ), [{Cp″Ru}₃P₅] ( 6 ), [{Cp*Fe}₂{Cp″Ru}P₅] ( 7 ) and the tetranuclear compound [{Cp″Ru}₃{Cp*Fe}P₄] ( 8 ). X‐ray crystallographic studies show that the P₅ ligand in the distorted M₂M′P₅‐triangulated dodecahedra of 5 and 7 offers an unusual novel coordination mode derived from the educt 1 .     

Nitro‐substituted iron(II) tridentate bis(imino)pyridine complexes as high‐temperature catalysts for the production of α‐olefins

A new series of nitro‐substituted bis(imino)pyridine ligands {2,6‐bis[1‐(2‐methyl‐4‐nitrophenylimino)ethyl]pyridine, 2,6‐bis[1‐(4‐nitrophenylimino)ethyl]pyridine, (1‐{6‐[1‐(4‐nitro‐phenylimino)‐ethyl]‐pyridin‐2‐yl}‐ethylidene)‐(2,4,6‐trimethyl‐phenyl)‐amine, and 2,6‐bis[1‐(2‐methyl‐3‐nitrophenylimino)ethyl]pyridine} and their corresponding Fe(II) complexes [{p‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐ Me? p‐NO₂}FeCl₂ ( 10 ), L₂FeCl₂ ( 11 ), {m‐NO₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? m‐NO₂}FeCl₂ ( 12 ), and {p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Mes}FeCl₂ ( 14 )] were synthesized. According to X‐ray analysis, there were shortenings of the axial Fe? N bond lengths (up to 0.014 Å) in para‐nitro‐substituted complex 10 and (up to 0.015 Å) in meta‐nitro‐substituted complex 12 versus the Fe(II) complex without nitro groups [{o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me}FeCl₂ ( 1 )]. Complexes 10 , 12 , and 14 afforded very active catalysts for the production of α‐olefins and were more temperature‐stable and had longer lifetimes than parent non‐nitro‐substituted Fe(II) complex 1 . The reaction between FeCl₂ and a sterically less hindered ligand [p‐NO₂? Ph? N?C(Me)? Py? C(Me)?N? Ph? p‐NO₂] resulted in the formation of octahedral complex 11 . A para‐dialkylamino‐substituted bis(imino)pyridine ligand [p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂] and the corresponding Fe(II) complex [{p‐NEt₂? o‐Me? Ph? N?C(Me)? Py? C(Me)?N? Ph? o‐Me? p‐NEt₂}FeCl₂ ( 16 )] were synthesized to evaluate the effect of enhanced electron donation of the ligand on the catalytic performance. According to X‐ray analysis, there was a shortening (up to 0.043 Å) of the axial Fe? N bond lengths in para‐diethylamino‐substituted complex 16 in comparison with parent Fe(II) complex 1 . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2615–2635, 2006     

Three AgI,CuI and CdII coordination polymers based on the new asymmetrical ligand 2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole: syntheses,characterization and emission properties

The new asymmetrical organic ligand 2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole ( L , C₁₇H₁₃N₅O), containing pyridine and imidazole terminal groups, as well as potential oxdiazole coordination sites, was designed and synthesized. The coordination chemistry of L with soft Ag^I, Cu^I and Cd^II metal ions was investigated and three new coordination polymers (CPs), namely, catena‐poly[[silver(I)‐μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole] hexafluoridophosphate], {[Ag( L )]PF₆}_n, catena‐poly[[copper(I)‐di‐μ‐iodido‐copper(I)‐bis(μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole)] 1,4‐dioxane monosolvate], {[Cu₂I₂( L )₂]·C₄H₈O₂}_n, and catena‐poly[[[dinitratocopper(II)]‐bis(μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole)]–methanol–water (1/1/0.65)], {[Cd( L )₂(NO₃)₂]·2CH₄O·0.65H₂O}_n, were obtained. The experimental results show that ligand L coordinates easily with linear Ag^I, tetrahedral Cu^I and octahedral Cd^II metal atoms to form one‐dimensional polymeric structures. The intermediate oxadiazole ring does not participate in the coordination interactions with the metal ions. In all three CPs, weak π–π interactions between the nearly coplanar pyridine, oxadiazole and benzene rings play an important role in the packing of the polymeric chains.     

Cyclopentadienyl Dicarbonyl Iron‐Bismuth Compounds – Synthesis,Structure, and Reactivity

Abstract. The cyclopentadienyl‐substituted iron‐bismuth complexes [{Cp(CO)₂Fe}BiCl₂] ( 1 ), [{Cp(CO)₂Fe}BiBr₂] ( 2 ), [{Cp′′(CO)₂Fe}BiBr₂] ( 3 ) and [{Cp*(CO)₂Fe}BiBr₂] ( 4 ) were prepared with high yields starting from [Cp^x(CO)₂Fe]₂ [Cp^x = C₅H₅ (Cp), C₅H₃‐1, 3‐tBu₂ (Cp′′), C₅Me₅ (Cp*)] and the corresponding bismuth halides. The single crystal X‐ray structure analyses of compounds 2 – 4 are reported. Comparison of their solubility demonstrates that the steric hindrance in this type of compounds is only slightly higher for compound 3 compared with compound 2 but significantly lower compared with the Cp* derivative 4 . Compounds 1 – 4 react with nucleophililic reagents such as KOtBu, NaOCH₂CH₂OCH₃, and NaOSiMe₃ as well as with water in the presence of an amine to give a mixture of [{Cp^x(CO)₂Fe}BiX] (X = Cl, Br) and [{Cp^x(CO)₂Fe}₃Bi]. In case of a reaction with nBu₄NCl and DMAP (dimethylaminopyridine) no such dismutation is observed. Instead the complexes [{Cp(CO)₂Fe}BiBr₂(DMAP)₂] ( 5 ), [NnBu₄]₂[{{Cp(CO)₂Fe}BiBr₃}₂] ( 6 ) and [NnBu₄]₂[{{Cp(CO)₂Fe}BiCl₃}₂] ( 7 ) were isolated and characterized by single‐crystal X‐ray diffraction.     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

Atom transfer radical polymerization of sodium2‐acrylamido‐2‐methylpropanesulfonate

The first example of well‐controlled atom transfer radical polymerization (ATRP) of a permanently charged anionic acrylamide monomer is reported. ATRP of sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) was achieved with ethyl 2‐chloropropionate (ECP) as an initiator and the CuCl/CuCl₂/tris(2‐dimethylaminoethyl)amine (Me₆TREN) catalytic system. The polymerizations were carried out in 50:50 (v/v) N,N‐dimethylformamide (DMF)/water mixtures at 20 °C. Linear first‐order kinetic plots up to a 92% conversion for a target degree of polymerization of 50 were obtained with [ECP]/[CuCl]/[CuCl₂]/[Me₆TREN] = 1:1:1:2 and [AMPS] = 1 M. The molecular weight increased linearly with the conversion in good agreement with the theoretical values, and the polydispersities decreased with increasing conversion, reaching a lower limit of 1.11. The living character of the polymerization was confirmed by chain‐extension experiments. Block copolymers with N,N‐dimethylacrylamide and N‐isopropylacrylamide were also prepared. The use of a DMF/water mixed solvent should make possible the synthesis of new amphiphilic ionic block copolymers without the use of protecting group chemistry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4446–4454, 2005     

Discrete Divalent Rare‐Earth Cationic ROP Catalysts: Ligand‐Dependent Redox Behavior and Discrepancies with Alkaline‐Earth Analogues in a Ligand‐Assisted Activated Monomer Mechanism

The first solvent‐free cationic complexes of the divalent rare‐earth metals, [{RO}RE^II]⁺[A]^? (RE^II=Yb^II, 1 ; Eu^II, 2 ) and [{LO}RE^II]⁺[A]^? ([A]^?=[H₂N{B(C₆F₅)₃}₂]^?; RE^II=Yb^II, 3 ; Eu^II, 4 ), have been prepared by using highly chelating monoanionic aminoether‐fluoroalkoxide ({RO}^?) and aminoether‐phenolate ({LO}^?) ligands. Complexes 1 and 2 are structurally related to their alkaline‐earth analogues [{RO}AE]⁺[A]^? (AE=Ca, 5 ; Sr, 6 ). Yet, the two families behave very differently during catalysis of the ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA) and trimethylene carbonate (TMC) performed under immortal conditions with excess BnOH as an exogenous chain‐transfer agent. The ligand was found to strongly influence the behavior of the RE^II complexes during ROP catalysis. The fluoroalkoxide RE^II catalysts 1 and 2 are not oxidized under ROP conditions, and compare very favorably with their Ca and Sr congeners 5 and 6 in terms of activity (turnover frequency (TOF) in the range 200–400 mol_L‐LA (mol_Eu h^?1)) and control over the parameters during the immortal ROP of L ‐LA (M_n,theor≈M_n,SEC, M_w/M_n<1.05). The Eu^II‐phenolate 4 provided one of the most effective ROP cationic systems known to date for L ‐LA polymerization, exhibiting high activity (TOF up to 1 880 mol_L‐LA?(mol_Eu h)^?1) and good control (M_w/M_n=1.05). By contrast, upon addition of L ‐LA the Yb^II‐phenolate 3 immediately oxidizes to inactive RE^III species. Yet, the cyclic carbonate TMC was rapidly polymerized by combinations of 3 (or even 1 ) and BnOH, revealing excellent activities (TOF=5000–7000 mol_TMC?(mol_Eu h)^?1) and unusually high control (M_n,theor≈M_n,SEC, M_w/M_n<1.09); under identical conditions, the calcium derivative 5 was entirely inert toward TMC. Based on experimental and kinetic data, a new ligand‐assisted activated monomer ROP mechanism is suggested, in which the so‐called ancillary ligand plays a crucial role in the catalytic cycle. A coherent reaction pathway computed by DFT, compatible with the experimental data, supports the proposed scenario.     

Mehrkernige Eisen/Tantal‐ und Tantal‐Komplexe mit Asn‐Liganden

Polynuclear Iron/Tantalum and Tantalum Complexes with As_n Ligands Starting with [Cp@Ta(CO)₄] ( 1 ) (Cp@ = C₅H₃^tBu₂‐1,3) and As₄ or (^tBuAs)₄ ( 2 ) its thermolysis at 190 °C in decalin gives [{Cp@Ta}₂(μ‐η⁴ : η⁴‐As₈)] ( 3 ), which is also formed according to equation (2) in addition to [{Cp@Ta}₃As₆] ( 5 ). The reaction of 1 or [{Cp*(OC)₂Fe}₂] ( 6 ) with 3 affords 5 or [{Cp*Fe}{Cp@Ta}As₅] ( 8 ) demonstrating the use of 3 as As_n source. 8 can also be synthesized from 1 and [Cp*Fe(η⁵‐As₅)] ( 7 ) for which the cothermolysis of 2 and 6 gives a better yield.     

Solvent‐ and Temperature‐Controlled In Situ Ligand Reactions Mediated by CuII and 3′‐[(E)‐{[(1S,2S)‐2‐Aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic Acid

Three new compounds, CuL, CuL′, and Cu₂O₂L′′₂ (H₂L=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic acid, H₂L′=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐5′‐nitro‐4‐biphenylcarboxlic acid, H₂L′′=3′‐(N,N‐dimethylamino methyl)‐4′‐hydroxy‐4‐biphenylcarboxlic acid), were selectively synthesized through a controlled in situ ligand reaction system mediated by copper(II) nitrate and H₂L. Selective nitration was achieved by using different solvent mixtures under relatively mild conditions, and an interesting and economical reductive amination system in DMF/EtOH/H₂O was also found. All crystal structures were determined by single‐crystal X‐ray diffraction analysis. Both CuL and CuL′ display chiral 1D chain structures, whereas Cu₂O₂L′′₂ possesses a structure with 13×16 Å channels and a free volume of 41.4 %. The possible mechanisms involved in this in situ ligand‐controlled reaction system are discussed in detail.     

Synthesis,Structural Characterization and Luminescence Studies of Di‐ and Trinuclear Gold(I) Alkynyl‐phosphine Complexes

Reactions of the polymer {Au^IC₂Ph}_n with polyphosphine ligands [1,4‐bis(2‐diphenylphosphino‐1H‐imidazol‐1‐yl)‐benzene (dpib), 1,3,5‐tris(4‐diphenylphosphinophenyl)benzene (tppb), 2,2′‐bis(diphenylphosphanyl)‐4,4′‐bipyridine (dpbp), and 3,6‐bis(diphenylphosphanyl)pyridazine (dppz)] afforded four gold(I) alkynyl‐polyphosphine complexes [{AuC₂Ph}₂(μ‐dpib)] ( 1 ), [{AuC₂Ph}₃(μ₃‐tppb)] ( 2 ), [{AuC₂Ph}₂(μ‐dpbp)] ( 3 ), and [{AuC₂Ph}₂(μ‐dppz)] ( 4 ) in nearly quantitative yield. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and polynuclear NMR spectroscopy. Intermolecular aurophilic interaction together with π–π and σ–π stacking build up the supramolecular 3D network of complex 3 , whereas none of these intermolecular bondings were found in the crystal structures of compounds 1 , 2 , and 4 . Complexes 1 – 4 are luminescent both in solution (CH₂Cl₂) and in solid state under laser irradiation (λ_ex = 308 nm). In solution, the diphosphine complexes 1 – 4 display dual emission corresponding to ligand centered transitions (λ_em = 360–375 nm) along with weaker contribution from MLCT excited states at ca. 490 nm. The long wavelength component of the emission plays a dominant role in the solid state luminescence spectra of complexes 1 , 3 , and 4 (460, 544, 520 nm, respectively) whereas the triphosphine complex 2 shows dual luminescence (372 and 520 nm) with considerable contribution from ligand centered excited state.     

Copper(II) Complexes of ω‐Hydroxy‐Functionalized N‐Salicylidenehydrazides show pH‐Controlled Switching between Dicationic Dimers and Neutral One‐Dimensional Coordination Polymers

New copper(II) complexes of the hydrazone ligands H₂salhyhb, H₂salhyhp, and H₂salhyhh, derived from salicylaldehyde and ω‐hydroxy carbonic acid hydrazides, have been synthesized and physically characterized. Two fundamental structures were found in solid state depending on the pH‐value of the reaction solution. Acidic conditions lead to the formation of the di‐μ‐phenoxo‐bridged dicationic complex dimers [{Cu(Hsalhyhb)}₂]²⁺ ( 1a ), [{Cu(Hsalhyhp)}₂]²⁺ ( 2a ), and [{Cu(Hsalhyhh)}₂]²⁺ ( 3a ), isolated as perchlorate salts. The dimeric complexes show strong antiferromagnetic coupling with J = ?399 ( 1a ), ?410 ( 2a ), and ?311 cm^?1 ( 3a ). Higher pH‐values resulted in the aggregation of neutral copper ligand fragments to the one‐dimensional coordination polymers [{Cu(salhyhb)}_n] ( 1b ), [{Cu(salhyhp)}_n] ( 2b ), and [{Cu(salhyhh)}_n] ( 3b ). 3b has been examined by means of X‐ray crystallography and represents the first example of a structurally characterized neutral copper(II) N‐salicylidenehydrazide complex without additional ligands. The magnetic interactions in the polymers are also antiferromagnetic with J = ?125 ( 1b ), ?136 ( 2b ), and ?148 cm^?1 ( 3b ), but strongly reduced compared to the corresponding dimeric complexes. The two basic structure types can be reversibly interconverted simply by pH‐control.     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

Synthesis of poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctyl‐fluorene) via direct arylation polycondensation

Poly(5,6‐difluoro‐2,1,3‐benzothiadiazole‐alt‐9,9‐dioctylfluorene) was successfully synthesized via direct arylation polycondensation of 5,6‐difluoro‐2,1,3‐benzothiadiazole and 2,7‐dibromo‐9,9‐dioctylfluorene. The reaction conditions were optimized, and a polymer with number‐average molecular weight (M_n) of 41,000 was obtained by using Pd(OAc)₂, P^tBu₂Me‐HBF₄, pivalic acid, K₂CO₃, and toluene as catalyst, ligand, additive, base, and solvent, respectively. The polycondensation was also performed with 5,6‐dioctyloxy‐2,1,3‐benzothiadiazole or 2,1,3‐benzothiadiazole as the comonomer, and the results indicate that the introduction of electron‐withdrawing fluorine atoms at the ortho‐positions to the C? H bonds is essential for the reactivity of the direct arylation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2367–2374     

Chemistry of N,S‐Heterocyclic Carbene and Metallaboratrane Complexes: A New η3‐BCC‐Borataallyl Complex

A high‐yielding synthetic route for the preparation of group 9 metallaboratrane complexes [Cp*MBH(L)₂], 1 and 2 ( 1 , M=Rh, 2 , M=Ir; L=C₇H₄NS₂) has been developed using [{Cp*MCl₂}₂] as precursor. This method also permitted the synthesis of an Rh–N,S‐heterocyclic carbene complex, [(Cp*Rh)(L₂)(1‐benzothiazol‐2‐ylidene)] ( 3 ; L=C₇H₄NS₂) in good yield. The reaction of compound 3 with neutral borane reagents led to the isolation of a novel borataallyl complex [Cp*Rh(L)₂B{CH₂C(CO₂Me)}] ( 4 ; L=C₇H₄NS₂). Compound 4 features a rare η³‐interaction between rhodium and the B‐C‐C unit of a vinylborane moiety. Furthermore, with the objective of generating metallaboratranes of other early and late transition metals through a transmetallation approach, reactions of rhoda‐ and irida‐boratrane complexes with metal carbonyl compounds were carried out. Although the objective of isolating such complexes was not achieved, several interesting mixed‐metal complexes [{Cp*Rh}{Re(CO)₃}(C₇H₄NS₂)₃] ( 5 ), [Cp*Rh{Fe₂(CO)₆}(μ‐CO)S] ( 6 ), and [Cp*RhBH(L)₂W(CO)₅] ( 7 ; L=C₇H₄NS₂) have been isolated. All of the new compounds have been characterized in solution by mass spectrometry, IR spectroscopy, and ¹H, ¹¹B, and ¹³C NMR spectroscopies, and the structural types of 4 – 7 have been unequivocally established by crystallographic analysis.     

Construction of ZnII‐based rac‐Helical Chains Containing Semi‐rigid Dipolar Ligand 1,4‐Bis(benzimidazol‐1‐ylmethyl)benzene

A Zn^II compound based on the semi‐rigid dipolar ligand 1,4‐bis(benzimidazol‐1‐ylmethyl)benzene (L), {[Zn( L )₂Cl₂]·2DMF}_n ( 1 ) has been synthesized successfully under solvothermal conditions. X‐ray single crystal diffraction shows that the complex contains P‐helical and M‐helical chains with 2₁ screw axis but crystallizes as a racemate. Through π···π stacking interactions between two well‐overlapping benzimidazoleyl rings from two adjacent chains, the 3D racemic supramolecular network is assembled. Furthermore, the IR, TGA and luminescent properties are also investigated in this work.     

A Polymeric Arched Chain and a Chair‐like M2L2‐Metallamacrocycle Crystal Engineered of [M(phen)]2+ (M = Cu,Cd; phen = 1,10‐Phenanthroline) Corner Units and the Bent Ligand 4,4′‐Dithiodipyridine

Self‐assembly of Cd(phen)²⁺ and Cu(phen)²⁺ (phen = 1,10‐phenanthroline) building blocks with the bent ligand 4,4′‐dithiodipyridine (dtdp) has been investigated. Both building blocks serve as corner units with constrained cis‐geometry. The arched chain coordination polymer [{Cd(phen)(μ‐dtdp)(dtdp)(H₂O)}(ClO₄)₂·2CH₃OH·1.5H₂O]_n ( 1 ) crystallised from a mixture of Cd(ClO₄)₂·H₂O, phen and dtdp in methanol. The reaction of [Cu(phen)(H₂O)₂](CF₃SO₃)₂ ( 2 ) with dtdp in an ethanol/water mixture yielded a chair‐like metallamacrocycle, [{Cu(phen)(CF₃SO₃)₂}₂(μ‐dtpd)₂] ( 3 ). The crystal structure of the precursor complex 2 is also reported.     

Synthesis,Characterization of a Novel 1,2,4‐Thiotriazine Derivative (CAMTTO), and Copper(I) and Silver(I) Complexes thereof (CAMTTO = {(4‐[(4‐Chlorobenzylidene)‐amino]‐6‐methyl‐3‐thioxo‐[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one)}

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazin‐thione‐5‐one (H₂AMTTO, 1 ) with 4‐chlorobenzaldhyde led to the corresponding iminic compound {(4‐[(4‐chloro‐benzylidene)‐amino]‐6‐methyl‐3‐thioxo[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one), CAMTTO ( 2 ). Treatment of 2 with copper(I) chloride in chloroform gave the dimeric complex [{(CAMTTO)₂CuCl}₂]·2CHCl₃ ( 3 ). Treatment of 2 with copper(I) chloride and silver(I) nitrate in the presence of the co‐ligand triphenylphophane gave the complexes [(CAMTTO)CuCl(PPh₃)₂] ( 4 ) and [(CAMTTO)Ag(PPh₃)₂]NO₃·2CHCl₃ ( 5 ). All compounds have been characterized by elemental analyses, ¹H NMR spectroscopy, IR spectroscopy, and partly by mass spectrometry and X‐ray diffraction studies. In addition 4 and 5 have been characterized by ³¹P{¹H} NMR spectroscopy. Crystal data for 2 at ?80 °C: monoclinic, space group P2₁/c, a = 1370.3(1), b = 767.8(1), c = 1268.7(1) pm, β = 107.12(1)°, Z = 4, R₁ = 0.0379; for 3 at ?80 °C: monoclinic, space group P2₁/c, a = 1442.6(2), b = 878.8(1), c = 2558.7(3) pm, β = 95.31(1)°, Z = 2, R₁ = 0.0746; for 4 at ?80 °C: triclinic, space group , a = 1287.9(1), b = 1291.7(1), c = 1359.5(1) pm, α = 90.44(1)°, β = 94.81(1)°, γ = 107.54(1)°, Z = 2, R₁ = 0.0359 and for 5 at ?80 °C: triclinic, space group , a = 1060.5(1), b = 1578.2(2), c = 1689.6(2) pm, α = 87.70(1)°, β = 86.66(1)°, γ = 76.84(1)°, Z = 2, R₁ = 0.0487.     

Discrete Cationic Zinc and Magnesium Complexes for Dual Organic/Organometallic‐Catalyzed Ring‐Opening Polymerization of Trimethylene Carbonate

We describe herein an original approach for the efficient immortal ring‐opening polymerization (iROP) of trimethylene carbonate (TMC) under mild conditions using dual‐catalyst systems combining a discrete cationic metal complex with a tertiary amine. A series of new zinc and magnesium cationic complexes of the type [{NNO}M]⁺[anion]^? ({NNO}^?=2,4‐di‐tert‐butyl‐6‐{[(2′‐dimethylaminoethyl)methylamino]methyl}phenolate; M=Zn, [anion]^?=[B(C₆F₅)₄]^? ( 2 ), [H₂N‐ {B(C₆F₅)₃}₂]^? ( 3 ), and [EtB(C₆F₅)₃]^? ( 4 ); M=Mg, [anion]^?=[H₂N{B(C₆F₅)₃}₂]^? ( 7 )) have been prepared from the corresponding neutral compounds [{NNO}ZnEt] ( 1 ) and [{NNO}‐ Mg(nBu)] ( 6 ). Compounds 2 – 4 and 7 exist as free ion pairs, as revealed by ¹H, ¹³C, ¹⁹F, and ¹¹B NMR spectroscopy in THF solution, and an X‐ray crystallographic analysis of the bis(THF) adduct of compound 7 , 7? (THF)₂. The neutral complexes 1 and 6 , in combination with one equivalent or an excess of benzyl alcohol (BnOH), initiate the rapid iROP of TMC, in bulk or in toluene solution, at 45–60 °C (turnover frequency, TOF, up to 25–30 000 mol(TMC)?mol(Zn)?h^?1 for 1 and 220–240 000 mol(TMC)?mol(Mg)?h^?1 for 6 ), to afford H‐PTMC‐OBn with controlled macromolecular features. ROP reactions mediated by the cationic systems 2 /BnOH and 7 /BnOH proceeded much more slowly (TOF up to 500 and 3 000 mol(TMC)?mol(Zn or Mg)?h^?1 at 110 °C) than those based on the parent neutral compounds 1 /BnOH and 6 /BnOH, respectively. Use of original dual organic/organometallic catalyst systems, obtained by adding 0.2–5 equiv of a tertiary amine such as NEt₃ to zinc cationic complexes [{NNO}Zn]⁺[anion]^? ( 2 – 4 ), promoted high activities (TOF up to 18 300 mol(TMC)?mol(Zn)?h^?1 at 45 °C) giving H‐PTMC‐OBn with good control over the M_n and M_w/M_n values. Variation of the nature of the anion in 2 – 4 did not significantly affect the performance of these catalyst systems. On the other hand, the dual magnesium‐based catalyst system 7 /NEt₃ proved to be poorly effective.     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006