Colorimetric and Fluorescent Bimodal Ratiometric Probes for pH Sensing of Living Cells

pH measurement is widely used in many fields. Ratiometric pH sensing is an important way to improve the detection accuracy. Herein, five water‐soluble cationic porphyrin derivatives were synthesized and their optical property changes with pH value were investigated. Their pH‐dependent assembly/disassembly behaviors caused significant changes in both absorption and fluorescence spectra, thus making them promising bimodal ratiometric probes for both colorimetric and fluorescent pH sensing. Different substituent identity and position confer these probes with different sensitive pH‐sensing ranges, and the substituent position gives a larger effect. By selecting different porphyrins, different signal intensity ratios and different fluorescence excitation wavelengths, sensitive pH sensing can be achieved in the range of 2.1–8.0. Having demonstrated the excellent reversibility, good accuracy and low cytotoxicity of the probes, they were successfully applied in pH sensing inside living cells.     

氨基苯基类中氮茚化合物的合成及作为质子探针的研究

设计合成了3个氨基苯基类中氮茚化合物, 研究了其在不同pH值的缓冲溶液中的荧光强度变化. 结果表明, 在pH=2.1～4.2之间, 该类化合物具有荧光敏感性. 化合物3a和3b可以作为良好的质子控制的荧光开关器件信号分子.     

Dual‐fluorophore Raspberry‐like Nanohybrids for Ratiometric pH Sensing

We report on the development of raspberry‐like silica structures formed by the adsorption of 8‐hydroxypyrene‐1,3,6‐trisulfonate (HPTS)@silica nanoparticles (NPs) on rhodamine B isothiocyanate (RBTIC)@silica NPs for ratiometric fluorescence‐based pH sensing. To overcome the well‐known problem of dye leaching which occurs during encapsulation of anionic HPTS dye in silica NPs, we utilized a polyelectrolyte‐assisted incorporation of the anionic HPTS. The morphological and optical characterization of the as‐synthesized dye‐doped NPs and the resulting nanohybrids were carried out. The pH‐sensitive dye, HPTS, incorporated in the HPTS‐doped silica NPs provided a pH‐dependent fluorescence response while the RBITC‐doped silica provided the reference signal for ratiometric sensing. We evaluated the effectiveness of the nanohybrids for pH sensing; the ratio of the fluorescence emission intensity at 510 nm and 583 nm at excitation wavelengths of 454 nm and 555 nm, respectively. The results showed a dynamic response in the acidic pH range. With this approach, nanohybrids containing different dyes or receptors could be developed for multifunctioning and multiplexing applications.     

Fiber-optic pH detection in small volumes of biosamples

Determining the pH values of microscopic plant samples may help to explain complex processes in plants, so it is an area of interest to botanists. Fiber-optic probes with small dimensions can be used for this purpose. This paper deals with the fiber-optic detection of the pH values of droplets of plant xylem exudate based on ratiometric fluorescence intensity measurements with an internal reference. For this purpose, novel V-taper sensing probes with a minimum diameter of around 8 μm were prepared that enable the delivery of fluorescence signal from the detection site on the taper tip to the detector. The taper tips were coated with pH-sensitive transducer (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt; HPTS) and a reference [dichlorotris-(1,10-phenanthroline) ruthenium (II) hydrate (Ru-phen dichloride)] immobilized in a xerogel layer of propyltriethoxysilane and (3-glycidoxy)propyl trimethoxysilane. The prepared probes were sensitive to pH values mainly in the range from 6.0 to 9.0. In the pH range 6–9, the results were limited by measurement errors of about 0.2 pH units, and in the pH range 5–6 by measurement errors of about 0.5 pH units. Using the developed V-taper sensing probes, the pH values of in vivo and in vitro samples of small volumes (∼6 μl) of exudate were measured. The results were validated by comparison with conventional electrochemical pH measurements.     

Ratiometric fluorescent detection of acidic pH in lysosome with carbon nanodots

It is significant for cell physiology to keep the homeostasis of p H, and it is highly demanded to develop ratiometric fluorescent sensors toward p H. In this work, under mild condition, through the electrostatic interaction between carbon nanodots(CDs) and organic molecules, two novel ratiometric fluorescence hybrid nanosensors were fabricated for sensing acidic p H. These nanohybrid systems possess dual emission peaks at 455 and 527 nm under a single excitation wavelength of 380 nm in acidic p H condition.With the increasing of p H, the fluorescence of the 1,8-naphthalimide derivative completely quenches,while the blue fluorescence of CDs keeps constant. Furthermore, the CDsàorganic molecular nanohybrids exhibit excellent anti-disturbance ability, reversible p H sensing ability, and a linear response range in wide p H range respectively. Besides the ability to target lysosome, with one of the nanosensor, stimulated p H change has been successfully tracked in a ratiometric manner via fluorescence imaging.     

罗丹明6G衍生物基偏酸性“关开型”pH荧光探针

以罗丹明6G和水合肼为原料,先制备罗丹明6G酰肼,接着在乙醇中滴加少量冰醋酸做催化剂后与2,5-二甲氧基苯甲醛反应,合成了一种新型的pH荧光分子探针(RGSBD),进行了结构表征及荧光性能研究。结果表明,原本在氢离子浓度较低,即体系pH较高时(pH≥4.0),探针RGSBD内酰胺螺环闭环导致不显示荧光并且无色,然而在氢离子浓度较大即体系pH较低时(pH<4.0)时,其内酰胺螺环闭环产生了明显的颜色变化,发出强烈的荧光。pH 1.9时,探针的荧光强度达到最大,最大荧光峰发生显著的红移。进一步研究表明,探针RGSBD的荧光峰强度差值与pH在1.9~3.2范围内呈良好的线性关系,探针RGSBD识别H^+的选择性高,稳定性与可逆性强,可发展用作生物体内pH荧光传感材料。     

Development of FRET-based dual-excitation ratiometric fluorescent pH probes and their photocaged derivatives

Dual-excitation ratiometric fluorescent probes allow the measurement of fluorescence intensities at two excitation wavelengths, which should provide a built-in correction for environmental effects. However, most of the small-molecule dual-excitation ratiometric probes that have been reported thus far have shown rather limited separation between the excitation wavelengths (20-70 nm) and/or a very small molar absorption coefficient at one of the excitation wavelengths. These shortcomings can lead to cross-excitation and thus to errors in the measurement of fluorescence intensities and ratios. Herein, we report a FRET-based molecular strategy for the construction of small-molecule dual-excitation ratiometric probes in which the donor and acceptor excitation bands exhibit large separations between the excitation wavelengths and comparable excitation intensities, which is highly desirable for determining the fluorescence intensities and signal ratios with high accuracy. Based on this strategy, we created a coumarin-rhodamine FRET platform that was then employed to develop the first class of FRET-based dual-excitation ratiometric pH probes that have two well-resolved excitation bands (excitation separations>160 nm) and comparable excitation intensities. In addition, these pH probes may be considered as in a kind of "secured ratioing mode". As a further application of these pH probes, the dual-excitation ratiometric pH probes were transformed into the first examples of photocaged dual-excitation ratiometric pH probes to improve the spatiotemporal resolution. It is expected that the modular nature of our FRET-based molecular strategy should render it applicable to other small-molecule dual-dye energy-transfer systems based on diverse fluorescent dyes for the development of a wide range of dual-excitation ratiometric probes with outstanding spectral features, including large separations between the excitation wavelengths and comparable excitation intensities.     

Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163 μM with a detection limit of 2.86 μM (S/N = 3).     

A new method for microcapsule characterization: use of fluorogenic genipin to characterize polymeric microcapsule membranes

Numerous microcapsule systems have been developed for a wide range of applications, including the sustained release of drugs, cell transplantation for therapy, cell immobilization, and other biotechnological applications. Despite the fact that microcapsule membrane is a dominant factor governing overall microcapsule performance, its characterization is challenging. We report a new method for characterizing microcapsule membranes, using the most common alginate-poly-L-lysine-alginate (APA) microcapsule as an example. Our data demonstrate that genipin, a naturally derived reagent extracted from gardenia fruits, interacts with poly-L-lysine (PLL) and generates fluorescence. This fluorescence allows clear visualization and easy analysis of the PLL membrane in the APA microcapsules using confocal laser scanning microscopy. The results also show that PLL binding correlates to the reaction variables during PLL coating such as PLL concentration and coating time. In addition, five other different microcapsule formulations consisting of PLL and/or chitosan membranes were examined, and the results imply that this method can be extended to characterize a variety of microcapsule membranes. These findings suggest that genipin can serve as a fluorogenic marker for rapid characterization of microcapsule membranes, a superior method that would have important implications for microcapsule research and potential in many other applications.     

Poly(L-Lysine)-pyranine-3 coacervate mediated nanoparticle-assembly: fabrication of dynamic pH-responsive containers

Counter-ion condensation of Poly(L-Lysine) in the presence of pyranine-3 generates spherical coacervates, which then template the assembly of silica nanoparticles to form microcapsule structures that dynamically control the optical ratiometric sensing of both the change in pH and release of the probe molecule.     

Proton "off-on" behaviour of methylpiperazinyl derivative of naphthalimide: a pH sensor based on fluorescence enhancement

In a search for new type pH sensing fluorophores, the possibility of using the proton "off-on" switch behaviour of naphthalimide derivatives for optical pH sensor preparation has been explored. A new compound, N-allyl-4-(4[prime or minute]-methyl-piperazinyl)-1,8-naphthalimide (AMPN), was synthesized. The enhancement of fluorescence of AMPN with the increase of hydrogen ion concentration is based on arresting photo-induced electron transfer to the naphthalimide fluorophore from aliphatic amine group after its protonation. The Stokes Shift of the proposed type of pH sensing fluorophore is significantly larger than that of the fluorescein counterparts. To avoid the leakage of the fluorophore, AMPN was photo-copolymerized with 2-hydroxyethyl methacrylate and acrylamide on the glass surface. The fluorescence intensity of membrane contacted with a pH 3.50 buffer is 4.7 times of that for pH 12.00 buffer solutions. The proposed pH sensor is not susceptible to ionic strength and shows good selectivity, repeatability and short response time. The membrane shows a good stability with a lifetime over two months. The sensor can be used for the determination of pH in the range of pH 4.5-9.0, without interference of most commonly co-existing inorganic ions and some organic species. The sensor has been applied to the analysis of urine samples.     

A new method for microcapsule characterization

Numerous microcapsule systems have been developed for a wide range of applications, including the sustained release of drugs, cell transplantation for therapy, cell immobilization, and other biotechnological applications. Despite the fact that microcapsule membrane is a dominant factor governing overall microcapsule performance, its characterization is challenging. We report a new method for characterizing microcapsule membranes, using the most common alginate-poly-l-lysine-alginate (APA) microcapsule as an example. Our data demonstrate that genipin, a naturally derived reagent extracted from gardenia fruits, interacts with poly-l-lysine (PLL) and generates fluorescence. This fluorescence allows clear visualization and easy analysis of the PLL membrane in the APA microcapsules using confocal laser scanning microscopy. The results also show that PLL binding correlates to the reaction variables during PLL coating such as PLL concentration and coating time. In addition, five other different microcapsule formulations consisting of PLL and/or chitosan membranes were examined, and the results imply that this method can be extended to characterize a variety of microcapsule membranes. These findings suggest that genipin can serve as a fluorogenic marker for rapid characterization of microcapsule membranes, a superior method that would have important implications for microcapsule research and potential in many other applications.     

A series of simple curcumin-derived colorimetric and fluorescent probes for ratiometric-pH sensing and cell imaging

Colorimetric and fluorescent probes have emerged as a potent tool for pH sensing due to easy operation and high sensitivity. However, most of the existing bimodal probes require complicated synthesis,which greatly limits their wide applications. Herein, a simple fluorescent dye（called BFCUR） featuring a D-π-A-π-D conjugated system was developed from the natural polyphenol curcumin（CUR）. BFCUR exhibited significant red-shift in UV absorption and fluorescence emission as pH increased because of th...     

The interaction of boronic acid-substituted viologens with pyranine: the effects of quencher charge on fluorescence quenching and glucose response

The fluorescence sensing of several monosaccharides using boronic acid-substituted viologen quenchers in combination with the fluorescent dye pyranine (HPTS) is reported. In this two-component sensing system, fluorescence quenching by the viologen is modulated by monosaccharides to provide a fluorescence signal. A series of viologen quenchers with different charges were prepared and tested for their ability both to quench the fluorescence of HPTS and to sense changes in glucose concentration in aqueous solution at pH 7.4. Both quenching efficiency and sugar sensing were found to be strongly dependent upon viologen charge. The molar ratio between HPTS and each of the viologen quenchers was varied in order to obtain an optimal ratio that provided a fairly linear fluorescence signal across a physiological glucose concentration range. Both the quenching and sugar sensing results are explained by electrostatic interaction between dye and quencher.     

Vertically Oriented Silica Mesochannels as the Template for Electrodeposition of Polyaniline Nanostructures and Their Electrocatalytic and Electroanalytical Applications

A mesoporous silica film (MSF) with vertically oriented mesochannels on a conductive substrate serves as a hard‐template for electrodeposition of polyaniline (PANI). The PANI nanostructures thus prepared are orderly confined in silica mesochannels, eventually producing a robust hybrid film. The film displays a good electrocatalytic activity toward oxidation of ascorbic acid, and can be used for potentiometric pH sensing with a Nernstian response.     

A new class of silica cross-linked micellar core-shell nanoparticles

Micellar nanoparticles made of surfactants and polymers have attracted wide attention in the materials and biomedical community for controlled drug delivery, molecular imaging, and sensing; however, their long-term stability remains a topic of intense study. Here we report a new class of robust, ultrafine silica core-shell nanoparticles formed from silica cross-linked, individual block copolymer micelles. Compared with pure polymeric micelles, the main advantage of the new core-shell nanoparticles is that they have significantly improved stability and do not break down during dilution. We also studied the drug loading and release properties of the silica cross-linked micellar particles, and we found that the new core-shell nanoparticles have a slower release rate which allows the entrapped molecules to be slowly released over a much longer period of time under the same experimental conditions. A range of functional groups can be easily incorporated through co-condensation with the silica matrix. The potential to deliver hydrophobic agents into cancer cells has been demonstrated. Because of their unique structures and properties, these novel core-shell nanoparticles could potentially provide a new nanomedicine platform for imaging, detection, and treatment, as well as novel colloidal particles and building blocks for mutlifunctional materials.     

Novel fluorescent pH sensor based on 5-(4-carboxy-phenyl)-10,15,20-tris(phenyl)-porphyrin

A novel fluorescent pH sensor based on 5-(4-carboxy-phenyl)-10,15,20-tris(phenyl)-porphyrin, as sensing agent, has been developed. The carboxyl functionalized asymmetric porphyrin has been synthesized and characterized by high performance liquid chromatography (HPLC), thin layer chromatography (TLC), proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FT-IR), ultraviolet–visible (UV–vis), emission, excitation and mass spectrometry (MS) spectra. Optical and fluorescence behaviors were investigated in relationship with variation of acid concentration in the range of acid pH from 1.5 to 5.5. Upon increasing the acidity of the solution, the decrease of the fluorescence intensity was noticed, as a linear function of pH. Different metal ions were tested to put into evidence the changes regarding the fluorescence intensity, but the fluorescence obtained results revealed no significant interference on pH determination. The conclusion is that the proposed fluorescent sensor can measure pH in acid range in the presence of different metal ions making this sensor a proper one for pH determinations in leaching solutions of the recyclable processes of valuable metals.     

Enhanced fluorescence cyanide detection at physiologically lethal levels: reduced ICT-based signal transduction

Three water-soluble fluorescent probes have been specifically designed to determine free cyanide concentrations up to physiologically lethal levels, >20 microM. The probes have been designed in such a way as to afford many notable sensing features, which render them unique with regard to signal transduction, photophysical characteristics, and their application to physiological cyanide determination and safeguard. The probes are readily able to reversibly bind free aqueous cyanide with dissociation constants around 4 microM3. Subsequent cyanide binding modulates the intramolecular charge transfer within the probes, a change in the electronic properties within the probes, resulting in enhanced fluorescence optical signals as a function of increased solution cyanide concentration. The ground-state chelation with cyanide produces wavelength shifts, which also enable the probes to sense cyanide in both an excitation and emission ratiometric manner, in addition to enhanced fluorescence signaling. This has enabled a generic cyanide sensing platform to be realized that is not dependent on fluorescent probe concentration, probe photodegradation, or fluctuations in the intensity of any employed excitation sources, ideal for remote cyanide sensing applications. Further, the >600 nm fluorescence emission of the probes potentially allows for enhanced fluorescence ratiometric cyanide sensing in the optical window of tissues and blood, facilitating their use for the transdermal monitoring of cyanide for mammalian safeguard or postmortem in fire victims, both areas of active research.     

Dual fluorescence of graphene oxide: a time-resolved study

The fluorescence properties of graphene oxide (GO) was studied by recording the fluorescence lifetime, fluorescence emission, and excitation spectra, as well as UV-visible and near-IR absorption spectra. For the first time, we showed that a blue band (ca. 440 nm) and a long wavelength (LW) band (ca. 700 nm) are coexistent, which can be recorded simultaneously by controlling concentration, excitation wavelength, and pH values. Two bands are closely related by the protonation or deprotonation of GO. The blue band is favored by low GO concentration, short excitation wavelength, and high pH value, while the LW band is favored by low pH and long excitation wavelength. To reveal the nature of the dual emission of GO, the fluorescence lifetimes under various conditions were also measured. The blue band contains three emitting components; one of them has a lifetime as long as 10 ns, and its emitting intensity is fairly sensitive to pH, showing the potential for applications in sensing H(+) and fluorescence lifetime imaging. Combining the results under various conditions, we conclude that the electronic transition for this component is very likely due to n-π* transition. The LW band contains two main emitting components (0.2 and 2.1 ns) that also appear in the blue band as minor contributors; the related emission is assigned to π-π* transition. In summary, GO emission is of broadband (300-1250 nm), long-lived, pH sensitive, and excitation wavelength dependent. This makes it easily tailored for versatile applications.     

Experimental design for the estimation of photophysical parameters of the two-state excited-state proton-exchange reaction in the presence of pH buffer

The excited-state proton-exchange reaction of commonly used fluorescent pH probes at physiological pH becomes reversible upon addition of pH buffer. Using computer-generated fluorescence decay surfaces, we investigated under which experimental conditions (pH, buffer concentration, and excitation and emission wavelengths) the rate constants describing the excited-state processes (k(ij)) and the spectral parameters related to excitation ((~)b(1)) and emission ((~)c(1)) can be accurately and precisely estimated by global compartmental curve fitting. It was found that a minimum of three fluorescence decay traces should be collected for the pH probe in the presence of buffer. These three decays should be characterized by at least two different pH values and at least two different buffer concentrations. In addition to these three traces, a minimum of one trace corresponding to the pH probe without buffer has to be recorded. Furthermore, for the accurate estimation of k(ij), (~)b(1), and (~)c(1), at least two of these traces should be collected at the same pH and excitation and emission wavelengths. The experimental conditions should be chosen in such a way that decays with unambiguous biexponential character are obtained. For fluorescent pH probes with pK(a) approximately equal to 7 that are responsive in the near-neutral pH range, it is advisable to use buffers with pK(B)(a) values comparable to or higher than the pK(a) of the probe. Because the changes in the decay times are already apparent with a small quantity of buffer, there is no need to use excessively high buffer concentrations. From a practical point of view, the best experimental design is attained when one combines in a single fluorescence decay surface traces originating from samples characterized by different pH values at the same buffer concentration with traces characterized by different buffer concentrations at the same pH and decays of samples without buffer measured at several pH values.