Organoboronium amphiphilic block copolymers

A new class of amphiphilic organometallic block copolymers with cationic organoboron pendant groups was developed. Selective replacement of one of the bromine substitutents on each boryl group of the block copolymer PSBBr₂‐b‐PS with an organometallic reagent ArM (ArM = 2,4,6‐trimethylphenyl copper, 4‐t‐butylphenyltrimethyl tin) followed by treatment with 2,2′‐bipyridine gave the novel block copolymers [ 3Ar ](Br)_n as light yellow solid materials that show good stability in air and moisture and high solubility in most organic solvents. Their structure and composition were confirmed by multinuclear NMR, GPC, and elemental analysis. Highly regular micellar aggregates form in block‐selective solvents (e.g., MeOH, toluene) as demonstrated by ¹H NMR, dynamic light scattering, and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6612–6618, 2009     

功能性两亲嵌段共聚物的研究进展

功能性两亲嵌段共聚物因自身独特的性质而在靶向输送、控制释放、分子识别等领域得到广泛的应用.本文对这类嵌段共聚物的合成方法、其胶束的形成机理、制备形式、表征手段以及一些常见的具有光学活性的两亲嵌段共聚物及其应用进行了综述.     

Porous polymer films and honeycomb structures based on amphiphilic dendronized block copolymers

Fabrication of honeycomb patterned films from our synthesized amphiphilic dendronized block copolymer by "on-solid surface spreading" method and "on-water spreading" method was reported for the first time in this paper. The comparison of the two methods indicated honeycomb-patterned films with smaller size, and larger surface density of micropores can be fabricated by spreading on water but with lower regular arrangement. Furthermore, several influencing factors on the formation of the honeycomb structure and the different morphologies, such as the concentration of the copolymer solution and the relative humidity in the atmosphere and the substrates, were investigated. The results showed that comparably high relative humidity from 80% to 95% was needed, and the mica plate as a spreading substrate was suitable to form orderly porous films for such a copolymer. The best ordered pattern could be formed from the copolymer with concentration of 1.00 mg/mL at the relative humidity of 85% using a mica plate. Besides, strong periodicity, regularity, and a large, defect-free area were notable, which made this structure extremely interesting for applications for templated molecular objects formed via intramolecular metal or metal oxide synthesis.     

Design of surface properties of PET films: effect of fluorinated block copolymers

This paper demonstrates that the addition of fluorinated block copolymers to PET solutions can be used to prepare PET films with controlled surface morphology, porosity and chemical composition, by exploiting the phenomenon known as breath figures (BF) formation during a spin-coating procedure. Surface features, such as number, depth and diameter of pores and chemical composition, can be tuned by varying the experimental conditions: relative humidity, solution composition and amount of the fluorinated block copolymer added to the PET solutions (in the range of 0.5-10 wt% with respect to PET). BF patterns are more evident at relatively high concentrations of PET (3 wt%) and content of fluorinated block copolymer (10 wt% with respect to PET) in the solution. According to the obtained results, the fluorinated block copolymer seems to play a role in different steps of the mechanism of BF formation. XPS measurements showed a surface composition much richer in fluorinated segments than expected from bulk composition. The combined surface roughness and surface segregation of fluorinated segments have only a limited effect on the macroscopic wettability of the surfaces.     

Julolidine-labelled fluorinated block copolymers for the development of two-layer films with highly sensitive vapochromic response

Fluorinated block copolymers composed of a polystyrene (S_x) first block and a polyacrylate second block carrying hydrophobic/lipophobic perfluorohexyl side chains (AF) were prepared by atom transfer radical polymerization (ATRP). Fluorescence emission properties were imparted to the copolymers by incorporation in the second block of a julolidine-based fluorescent molecular rotor (JCBF). The synthesized block copolymers were used as the fluorescent low-surface energy thin top-layer onto a polystyrene bottom-layer to produce novel two-layer film vapochromic sensors. Contact angle and X-ray photoelectron spectroscopy (XPS) measurements revealed that the two-layer film surfaces were hydrophobic and lipophobic at the same time and highly enriched in fluorine content as a result of the effective segregation of the perfluorinated tails to the polymer-air interface. The fluorescence intensity of the two-layer films decreased significantly when they were exposed to vapours of organic solvents, including tetrahydrofurane, chloroform, and trifluorotoluene. However, an AF content-dependent sensing behaviour was also observed, with the two-layer films containing the copolymer with the shorter fluorinated block giving a more rapid and almost quantitative decrease in fluorescence variation. Fluorescence emission of the films was also proved to vary with temperature. Both the vapochromic and thermochromic responses were reversible after successive solicitation cycles. The fluorescence variation of the two-layer films was much more marked than that of the corresponding PS/JCBF blend, thus providing a system potentially applicable as highly sensitive volatile organic compound (VOC) sensor, thanks to the active role of the fluorinated block in promoting the migration of the fluorophore to the outermost surface layers.     

Foam and wetting films from amphiphilic block copolymers: Isoelectric state and stability

Foam and wetting films from PEO-PPO-PEO triblock copolymers Synperonic P85 and F108 are studied under the identical conditions, using microinterference method. The range of background electrolyte concentration, where DLVO (electrostatic and van der Waals) forces and non-DLVO (steric) forces act in the films, is determined. From the dependence of the film thickness on pH, it is unambiguously shown that electrostatic interactions (i.e., the potential and surface charge) in the foam and wetting films caused by the presence of nonionic polymer surfactants arise due to the preferential adsorption of OH⁻ ions at the solution-air interface. The films obtained below the critical pH values are sterically stabilized; i.e., a decrease in pH induces a transition from electrostatic to steric stabilization. Three-layer models are designed for both types of films that allow to calculate electrostatic disjoining pressure Π_el. The values of ϕ₀ potential of the foam film are used to calculate Π_el in wetting films. A relation between the isoelectric state of foam and wetting films and their stability is found to exist in the range of pH corresponding to electrostatic stabilization. Metastable films, film rupture, or the transition to sterically stabilized films were also found. The text was submitted by the authors in English.     

新型线状-树枝状两亲嵌段共聚物的合成

本文设计合成了一系列由不同链长的聚丙烯酸(PAA)为亲水嵌段和不同代数聚苄醚树枝体(Dendr.PBE)为疏水嵌段的杂化共聚物(PAA-Dendr.PBE)。     

Nanostructured carbon arrays from block copolymers of polyacrylonitrile

Arrays of graphitic carbon nanoclusters were obtained by pyrolysis of nanoscale phase-separated block copolymers of polyacrylonitrile and poly(n-butyl acrylate). Upon heating in an inert atmosphere to temperatures ranging from approximately 400 to 1200 degrees C, polyacrylonitrile domains were converted into carbon nanoclusters, maintaining the overall shape and spacing, whereas the poly(n-butyl acrylate) phase was sacrificed. Preservation of the original nanoscale morphology of a block copolymer was possible only if pyrolysis was preceded by oxidation at temperatures of approximately 230 degrees C, in analogy with thermal stabilization of polyacrylonitrile precursor in the process used in the manufacturing of carbon fibers. Preorganization of the carbon precursor through self-assembly in block copolymers of polyacrylonitrile appears to be an attractive and robust strategy for templated synthesis of well-defined nanostructured carbon materials.     

Langmuir monolayer and Langmuir–Blodgett films of amphiphilic triblock copolymers with water-soluble middle block

Langmuir monolayers and Langmuir–Blodgett (LB) film morphology of amphiphilic triblock copolymers are studied using surface pressure-area measurements and atomic force microscopy (AFM), respectively. The triblock copolymers are composed of long water-soluble poly(ethylene oxide) (PEO) chains as middle block with very short poly(perfluorohexylethyl methacrylate) (PFMA) end blocks. The surface pressure-area isotherms show phase transitions in the brush regime. This phase transition is due to a rearrangement of PFMA block at the air–water interface. It becomes more significant with increasing PFMA content in the copolymer. LB films transferred at low surface pressures from the air–water interface to hydrophilic silicon substrates show surface micelles in the size range of 50–100 nm. A typical crystalline morphology of the corresponding PEO homopolymer is observed in LB films of copolymers with very short PFMA blocks, transferred in the brush region at high surface pressure. This crystallization is hindered with increasing PFMA content in the copolymer.     

Synthesizing amphiphilic block copolymers through macromolecular azo-coupling reaction

This communication reports a new approach to synthesize amphiphilic block copolymers. The copolymers with well-defined structures were synthesized by macromolecular azo-coupling reaction between the diazonium salt of aniline-functionalized PEG and the polymeric blocks with a terminal suitable for the azo-coupling reaction.     

Synthesis and surface properties of amphiphilic block copolymers polyvinylpyrrolidone-block-polystyrene

Amphiphilic block copolymers of N-pyrrolidone and styrene were prepared by chain transfer to organogermanium compounds bis(pentafluorophenyl)germane and tris(pentafluorophenyl)germane. The relative chain-transfer constants were determined. The surface properties of the isolated block copolymers with various numbers of units in the hydrophilic block were studied. The polar and dispersive components of the surface tension of films of the amphiphilic block copolymers were calculated by the Zisman method.     

Synthesis of amphiphilic block copolymers polystyrene-block-polyvinylpyrrolidone from active polystyrene

A new method was developed for preparing amphiphilic block copolymers polystyrene-block-polyvinylpyrrolidone. The colloid-chemical properties of the copolymers were studied by probe microscopy and wetting. The possibility of modifying the properties of surfaces by the block copolymers synthesized and of preparing inverse emulsions based on them was demonstrated.     

Interactions of amphiphilic block copolymers with lipid model membranes

Studies on interactions between amphiphilic block copolymers and lipid membranes have been focused traditionally on ABA triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), widely due to their commercial availability. However, new architectures of amphiphilic block copolymer have been synthesized in recent years partially taking advantage of new polymerization techniques. This review focuses on amphiphilic block copolymers with potential biological activity and on model membrane systems used for studying interactions with such block copolymers. Experimental methods to study block copolymer–phospholipid interactions in Langmuir monolayers, liposomes, and planar bilayers are summarized. This work is intended to convey a better understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy. Recent developments and open questions are addressed.     

Synthesis of amphiphilic block copolymers bearing stable nitroxyl radicals

We present here the synthesis of two kinds of amphiphilic block copolymers, a diblock copolymer MPEG‐b‐PTAm and a triblock copolymer MPEG‐b‐PLA‐b‐PTAm, which can self‐assemble into micelles with nitroxyl radicals‐containing PTAm segment in the core. The structure of the block copolymers was characterized by ¹H NMR and GPC. Dynamic laser light scattering and transmission electron microscopy were used to study the micellar behavior of the two block copolymers in aqueous solution. The micelles carrying nitroxyl radicals in the core can generate electron paramagnetic resonance, which is stable for a period of time up to 8 min even in the presence of reducing reagent such as ascorbic acid. The enhanced stability against the reducing agent was ascribed to the inaccessibility of the nitroxyl radical core placed in the interior of the micelles. Combined with the biocompatibility, these micelles were promising to be used as the EPR probes for bioimaging in vivo. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and aggregation behaviour of amphiphilic block copolymers with random middle block

The effect of microstructure on the aggregation behaviour of symmetrical di- and triblock copolymers P(BMA)-b-P(MAA) and P(BMA)-b-P(BMA-co-MAA)-b-P(MAA) with a molecular weight of 40,000 g/mol was studied. The critical micelle concentration, hydrodynamic radius and morphology of the micelles were determined by fluorescence spectroscopy, dynamic light scattering and scanning force microscopy (SFM). Whereas no effect of the microstructure on the critical micelle concentration could be detected, the hydrodynamic radius decreased from di- to triblock copolymer from 53 to 36 nm. The decrease of about 32% corresponds to the length of the random middle block within the triblock copolymer so that the reduction in hydrodynamic radius was caused by a complete orientation of the random middle block at the core corona interface. Finally, the SFM investigation showed that dehydration of micelles on a substrate is accompanied by formation of a physisorbed monolayer with a thickness of 2 nm on which the micelles are deposited.     

Aggregates of amphiphilic fluorinated copolymers and their encapsulating and unloading homopolymer behaviors

Amphiphilic fluorinated block copolymers synthesized via reversible addition‐fragmentation chain transfer polymerization were used for the preparation of aggregates of various morphologies. First, dissolve the copolymer in 2‐butanone; second, add a precipitant solvent, which was the mixture of water and methanol, to induce the aggregation of the hydrophobic fluorinated block. With a hydrophilic tail and a very hydrophobic segment, these copolymers are likely to self‐assemble in solution and form aggregates. Observed by TEM, spheres, rods, and vesicles can be formed by changing the precipitant mixture contents. Besides, these aggregates were found to be able to carry hydrophobic fluorinated homopolymers, and two suggested processes have been proposed to explain their morphology changes from original spheres, rods and vesicles into larger size spheres. Finally, hollow bilayer spheres and tubules can be achieved after extracting homopolymers in the center of the newly formed spheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1000–1006, 2008     

Self-assembled micelles of novel graft amphiphilic copolymers for drug controlled release

In this study, with the aim of designing an ideal anticancer drug carrier, we synthesized novel amphiphilic graft copolymers, P(Glu-alt-PEG)-graft-PCLA, based on poly(ethylene glycol) (PEG) segments and glutamic acid (Glu) units as the hydrophilic main chain, and poly(?-caprolactone-co-lactide) (PCLA) as hydrophobic branches. The chemical structure of the copolymers was characterized by (1)H MNR and FT-IR. The self-assembly of the copolymers to form micelles was studied by TEM, DLS and fluorescence spectroscopy. In vitro doxorubicin controlled release studies demonstrated that these graft copolymer micelles had high drug loading capacity and good controlled released properties, demonstrating their potential as a novel anticancer drug carrier. The drug loaded graft copolymer micelles exhibited efficient inhibition of HeLa cells in in vitro studies.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Formation of polymer vesicles by liquid crystal amphiphilic block copolymers

We report the formation of polymer vesicles (or polymersomes) by a new class of amphiphilic block copolymers in which the hydrophobic block is a side-on nematic liquid crystal polymer. Two series of these block copolymers, named PEG-b-PA444 and PEG-b-PMAazo444, with different hydrophilic/hydrophobic ratios were synthesized and characterized in detail. Polymersomes and nanotubes were formed by adding water into a solution of copolymers in dioxane. Polymersomes in water were finally obtained by dialyzing the resulting mixture against water. These self-assemblies have been studied by classical TEM and cryo-TEM. For the PEG-b-PA444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 40/60 to 19/81. For PEG-b-PMAazo444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 26/74 to 18/82. For a PEG-b-PA444 sample with hydrophilic/hydrophobic ratio equal to 25/75, a tubular morphology with tube diameter of typically 100 nm and tube length of up to 10 mum was also observed together with polymersomes during addition of water into the polymer solution in dioxane.     

Wetting of heterogeneous surfaces of block copolymers containing fluorinated segments

 The wetting of well-characterized heterogeneous surfaces of block copolymers has been studied by low-rate dynamic contact angle measurements using axisymmetric drop-shape analysis. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the roughness, the heterogeneity and the chemical composition of the surfaces. By changing the block length of polysulfone and semifluorinated polyester segments in the block copolymers, the surface heterogeneity of thin films prepared on silicon wafers could be controlled. Tapping-mode AFM measurements showed that soft, hydrophobic domains of varying size on the submicrometer length scale were obtained on these surfaces (60–250 nm). The mean roughness was of the order of several nanometers. The results of the contact angle measurements showed that neither roughness nor heterogeneity had a significant effect on the advancing contact angle of water, at the scale of the features present; however, the contact angle hysteresis increased with increasing percentage of the soft domains. We assume that liquid retention by the solid upon retraction of the three-phase line is the main cause for the observed increase in contact angle hysteresis. Concerning the molecular composition of these block copolymer surfaces, angle-resolved XPS analysis showed a surface segregation of fluorine within the surface region. A direct correlation was found between the fluorine content of the block copolymer surfaces and the advancing contact angle of water. Received: 26 May 2000 Accepted: 3 January 2001