核-壳式纳米SnO2/TiO2光催化剂的制备和性能

 以纳米SnO2·nH2O胶体粒子为基质,采用活性层包覆法制备了纳米SnO2/TiO2复合光催化剂,并用R,TEM,XPS和XRD等手段进行了表征. 采用敌敌畏的光催化降解反应对所制催化剂的活性进行了评价. 结果表明,SnO2/TiO2为核-壳结构,粒径约为12 nm. SnO2/TiO2的光催化活性受TiO2含量及SnO2·nH2O乙醇溶液含水量的影响. 最佳条件为SnO2/TiO2中TiO2含量为56.45%,SnO2·nH2O乙醇溶液含水量为20%. 所制SnO2/TiO2光催化活性比纯TiO2显著提高,且光催化活性稳定,可重复使用.     

纳米SnO2@TiO2的制备及其光催化性能

以SnCl4和Ti(OBu)4为原料,采用活性层包覆法制备了SnO2@TiO2包覆型复合光催化剂,并用XPS、IR、XRD、TEM和BET等手段进行了表征,以二甲基二氯乙烯基磷酸酯（简称DDVP）稀释液为模拟废水,考察了SnO2@TiO2的光催化活性及降解液初始浓度对反应动力学的影响.结果表明：包覆粒子由锐钛矿型TiO2和金红石型SnO2组成;与纯SnO2、TiO2相比,SnO2@TiO2包覆粒子的光催化活性明显提高,DDVP稀释液被光催化降解属于零级反应,但反应表观速率常数与降解液初始浓度成正比.     

SnO2-TiO2复合颗粒的形态结构及其光催化活性

在气溶胶反应器中,利用TiCl4高温氧化反应制备超细TiO2,采用均匀沉淀法在TiO2表面沉积SnO2,制备SnO2-TiO2复合颗粒,应用TEM、EDS、XRD、BET比表面积测试等手段对粒子进行表征。以活性艳红X-3B溶液为处理对象,考察复合颗粒的光催化活性。结果表明SnO2-TiO2复合颗粒的光催化活性较纯气相合成超细TiO2有较大提高,SnO2最佳含量为15.3%,SnO2-TiO2复合颗粒光催化活性的提高归因于不同能级半导体之间光生载流子的输运和分离。     

超临界流体干燥法制备纳米TiO2－ZnO复合催化剂及其对苯酚降解的光催化性能

 以TiCl4和Zn（NO3）2·6H2O为原料，采用溶胶－凝胶法结合超临界流体干燥法制备了纳米级TiO2－ZnO（7～10nm）复合催化剂，并用XRD和TEM等手段进行了表征．以苯酚光催化降解为模型反应对所制备催化剂的催化性能进行了评价．结果表明，与单组分TiO2及普通干燥法制备的TiO2－ZnO催化剂相比较，纳米TiO2－ZnO复合粒子的光催化活性有较大提高．用超临界干燥法制备的催化剂具有粒径小、分布窄、比表面积大、分散性好和光催化活性高等特点．采用超临界流体干燥法可直接制得纳米TiO2（锐钛矿型）－ZnO（非晶态）复合催化剂，可实现干燥、晶化一步完成．复合催化剂中ZnO的最佳掺入量为x（ZnO）＝0．8％．超临界流体干燥法是制备纳米材料的一种新技术，具有产物容易收集和溶剂可回收利用等优点．     

纳米SnO_2@TiO_2的制备及其光催化性能

SnCl4和 Ti(OBu)4为原料,采用活性层包覆法制备了 SnO2@TiO2包覆型复合光催化剂,并用 XPS、 IR、 XRD、 TEM和 BET等手段进行了表征,以二甲基二氯乙烯基磷酸酯（简称 DDVP）稀释液为模拟废水,考察了 SnO2@TiO2的光催化活性及降解液初始浓度对反应动力学的影响 .结果表明：包覆粒子由锐钛矿型 TiO2和金红石型 SnO2组成;与纯 SnO2、 TiO2相比, SnO2@TiO2包覆粒子的光催化活性明显提高, DDVP稀释液被光催化降解属于零级反应,但反应表观速率常数与降解液初始浓度成正比 .     

SnO2-TiO2复合光催化剂的制备和性能

采用均匀沉淀法在超细TiO2表面包覆SnO2,制备出SnO2-TiO2复合光催化剂,并用EDS,XRD,TEM和BET比表面积测定等手段进行了表征.以活性艳红X-3B溶液为模拟废水,考察了SnO2-TiO2的光催化活性.结果表明,复合粒子由锐钛矿型TiO2和金红石型SnO2组成;与纯TiO2相比,SnO2-TiO2的光催化活性有较大提高,SnO2最佳包覆量为18.4%.复合光催化剂活性的提高归因于不同能级半导体之间光生载流子的输运和分离.     

ZnO掺杂的SnO_2纳米纤维的制备、表征及气敏机理(英文)

以二水氯化亚锡(SnCl2·2H2O)为盐原料,采用静电纺丝的方法制备了SnO2纳米纤维.为了研究ZnO掺杂对SnO2形貌、结构及化学成分的影响,分别制备了不同含量ZnO掺杂的SnO2/ZnO复合材料.利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱仪、扫描电镜(SEM)及能量色散X射线(EDX)光谱对材料的结晶学特性及微结构进行了表征.制备的SnO2/ZnO复合材料是由纳米量级的小颗粒构成的分级结构材料.ZnO含量不同,对应的SnO2/ZnO复合材料结构不同.表征结果表明ZnO的掺杂量对SnO2材料的形貌及结构均起着重要作用.将制备的不同ZnO含量的SnO2/ZnO复合材料进行气敏测试,测试结果表明,Sn:Zn摩尔比为1:1制作的气敏元件对甲醇的灵敏度优于其它摩尔比的气敏元件.讨论了SnO2/ZnO复合材料气敏元件的敏感机理.同时针对Sn:Zn摩尔比为1:1时表现出最好的气敏响应,分析了其原因,包括Zn的替位式掺杂行为、ZnO的催化作用、过量ZnO对SnO2生长的抑制作用以及SnO2与ZnO晶粒界面处的异质结.     

纳米SnO2@TiO2包覆催化剂的制备及表征

采用活性层包覆法在自制细SnO2胶体粒子表面包覆TiO2,制备出SnO2@TiO2包覆型复合催化剂,以其对有机磷农药DDVP的降解效果作为评价光催化活性的标准,对制备条件进行了优化,并用XRD、TEM和BET等手段对样品进行了表征,结果表明,SnO2胶体乙醇溶液含水量20％,钛酸丁酯质量分数为34.5％。灼烧温度680℃时制得TiO2含量56.45％的包覆样品SnO2@TiO2为纳米级粒子,且其光催化活性最佳。     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

H2O2络合凝胶法制备纳米TiO2/SiO2复合催化剂及其光催化性能

采用H2O2络合凝胶法获得钛的络合物[TiO(H2O2)]2 水溶胶,并与SiO2水溶胶包覆复合,制备了纳米TiO2/SiO2复合半导体催化剂,其结构经XRD和BET表征。以含阳离子艳红染料模拟废水降解为模型反应,考察了复合催化剂的光催化性能。实验结果表明:经650℃焙烧后的复合催化剂中TiO2粒径为9.8 nm,光催化活性最好,SiO2的最佳掺杂量为25%。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。