Design and fabrication of Fourier plane diffractive optical elements for high-power fibre-coupling applications

In industrial processes using fibre beam delivery of high peak power laser light, diffractive optical elements are a very useful and flexible tool in maximising the amount of light reaching the work surface. This is due to the ability of diffractive optical elements to accurately couple light into multiple fibres, while conditioning the light in order to maximise the throughput for each fibre. We discuss the design techniques for diffractive optical elements and the application of these techniques to fibre-coupling problems. The flexibility of diffractive optical elements is demonstrated by their application to several fibre-coupling geometries, including a fibre bundle, a linear array of fibres, and a rotationally symmetric fibre connector. The diffraction efficiencies for the elements approach 90% with uniformity errors of less than 5%.     

Linearly polarised three-colour lasing emission from an evanescent wave pumped and gain coupled fibre laser

A novel Whispering--Gallery--Mode (WGM) fibre laser, emitting linearly polarised three-colour light, is demonstrated by pumping and gain coupling with evanescent waves. The pump light is longitudinally coupled into a bare optical fibre immersed in a dye solution of lower refractive index. The dye molecules around the bare fibre are excited by the evanescent waves of pump light when they propagate along the fibre in a total internal reflection. When the pump beam within the fibre is a meridian beam, the WGM lasing emission from the fibre laser is a linearly polarised transverse electric wave, while it is a mixed wave of the linearly polarised transverse electric and magnetic waves if the pump beam is a skew beam within the fibre. Because the excited molecules are located within the evanescent field of WGM, a good spatial overlap between the dye gain and the evanescent field leads to a high pumping efficiency and a longer gain distance along the fibre. Once the bare fibre is inserted into three glass capillaries filled with Rhodamine 6G, 610 and 640 dye solutions, respectively, WGM laser oscillations at the wavelengths of 567--575, 605--614 and 656--666~nm occur simultaneously, and a linearly polarised three-colour lasing emission is achieved in a single optical fibre.     

Mechanical vibration measurements using a fibre optic laser-Doppler probe

The feasibility of using a fibre optic for transmitting laser light to a vibrating object and scattered light back to a laser-Doppler unit, has been demonstrated. A new mode of operation of laser-Doppler equipment has been devised with marked improvement over the usual Twyman-Green mode. With the aid of this fibre optic laser-Doppler system both frequency and amplitude information can be obtained from otherwise inaccessible machine components.     

High Power Photonic Crystal Fibre Raman Laser

A cw Raman laser based on a 100-m photonic crystal fibre is demonstrated with up to 3.8 W output power at the incident pump power of 12 W, corresponding to an optical-to-optical efficiency of about 31.6%.. The second order Stokes light, which is firstly reported in a cw photonic crystal fibre Raman laser, is obtained at 1183nm with an output power of 1.6 W and a slope efficiency of about 45.7%.     

Single Mode Er-Doped π-Phase-Shifted Distributed Feedback Fibre Grating Laser

A novel method incorporating the shielded method and the post-processing method has been proposed to fabricate the π-phase-shifted fibre grating. Then an Er-doped π-phase-shifted distributed feedback fibre grating laser has been fabricated using the grating. The laser threshold is 20mW. When pumped with 90mW light at 980nm, the laser gives an output of 1.1mW. Its signal-to-noise ratio is better than 60dB. It is demonstrated that the laser is single mode operation by means of a Fabry--Perot scanning interferometer.     

86-km optical link with a resolution of 2 × 10<Superscript>-18</Superscript> for RF frequency transfer

RF frequency transfer over an urban 86 km fibre has been demonstrated with a resolution of 2×10^-18 at one day measuring time using an optical compensator. This result is obtained with a reference carrier frequency of 1 GHz, and a rapid scrambling of the polarisation state of the input light in order to reduce the sensitivity to the polarisation mode dispersion in the fibre. The limitation due to the fibre chromatic dispersion associated with the laser frequency fluctuations is highlighted and analyzed. A preliminary test of an extended compensated link over 186 km using optical amplifiers gives a resolution below 10^-17 at 1 day.     

Long Optical Delay Lines Enhanced by Ring Configuration in Optical Fibres

A long optically controlled delay line enhanced by ring configuration is demonstrated by using the group-velocity control of signal pulses based on stimulated Brillouin scattering. In experiment, two optical fibre ring cavities are used： one is used as the Brillouin laser, providing single-mode Stokes wave as probe wave; the other is used as the Brillouin amplifier, working as slow light medium. We achieve a maximum time delay of 215ns using the ring Brillouin amplifier, five times larger than the input probe pulse width of 40ns. In the meantime, a considerable pulse broadening is observed, which agrees well with the theoretical prediction based on linear theory.     

High power CW solid-state multilaser system

A laser system containing four CW Nd:YAG double-rod lasers, transforming optics and a fibre with input-output optics has been designed and investigated. It is shown that reduction of the beam parameter product of the non-Gaussian beams in the image space of the lens has made it possible to collect the emission of four lasers to the same fibre. Independent laser operation has provided the output power control in the range of 10–900 W with a stable light spot size on the input end of the fibre.     

可补偿偏置漂移的扭转光纤电流传感器

针对扭转光纤电流传感器由于环境因素（如温度,压力,振动）变化使光纤中传输光偏振态改变,从而导致传感器输出与漂移问题,提出了一种新的信号处理方法进行克服,这一方法适用于交变电流的检测,实验中通过旋转输入线偏振光偏振方向的方法检验了所提垢有效性,证明这种补偿方法对传感器置相位的任意偏移均适用。     

Fibre Optical Parametric Amplification in Defect Bragg Fibres with Zero Dispersion Slow Light Effect

Nonlinearity enhancement by slow light effect and strong light confinement in defect Bragg fibres is demonstrated and anMysed in applications of fibre optical parametric amplifiers. Broadband low group velocity and zero dispersion as well as the strong light confinement by band gap enhances the nonlinear coefficient up to more than one order than the conventional high nonlinear fibres. Moreover, the zero dispersion wavelength of coupled core mode can be designed arbitrarily, under which the phase-matching bandwidth of the nonlinear process can be extended.     

Non-intrusive refractometer sensor

An experimental realization of a simple non-intrusive refractometer sensor is demonstrated in this communication. The working principle of the sensor is based on intensity modulation of the back-reflected light when output light from an optical fibre end focusses onto air-medium interface. The change in the refractive index of the medium affects the reflectance of the incident light signal and thus modulates the back-reflected signal. Refractive index variation as small as 0.002 RIU can be measured using the present technique. The advantages of the technique are its simplicity, cost efficiency and usefulness in monitoring refractive indices of acidic solutions.     

Observation of the optoacoustic effect in an optical fibre

The rediationless absorption of light propagating in optical fibres induces both stress waves and thermal waves in the fibre medium. Detection of such waves is termed the optoacoustic effect. Successful detection in optical fibres is easily obscured by scattered light impinging on the detector. We have obtained a signal of 2 mV on a piezoceramic transducer attached to a commercial step-index optical fibre after passage of a 1 J ruby laser light pulse along the fibre axis. No signal was, however, produced when the transducer was not in contact with the fibre. Similar results were obtained using chopped cw laser radiation but then more care had to be taken since the transducers used had a measureable sensitivity to the low frequency chopped radiation emitted perpendicular to the optical fibre axis.     

Long-Range Surface Plasmon Polaritons Guided by a Thin Metal Stripe

A long-range surface plasmon polariton （LRSPP） waveguide consisting of a 15nm thick gold stripe embedded in a homogeneous polymer BCB is reported. LRSPPs are excited by TM-mode input light successfully using an end-fire method. By scanning the output coupling fibre, the near field of the LRSPP is measured. The propagation loss of as low as 2.34 dB/mm is demonstrated.     

Optical parametric chirped pulse amplification based on photonic crystal fibre

A compact two-stage optical parametric chirped pulse amplifier based on photonic crystal fibre is demonstrated.A 1064-nm soliton pulse is obtained in a home-made photonic crystal fibre (PCF) with femtosecond pulse pumping and then amplified to 2 mJ in an Nd:YAG regenerative amplifier.After the amplified pulses pass through the LBO crystal,the 532-nm double-frequency light with an energy of 0.8 mJ and a duration of over 100 ps at 10-Hz repetition rate is generated as a pump source in the following two-stage optical parametric amplification (OPA).The 850-nm chirped signal light gain from the stretcher is 1.5×10 4 in the first-stage OPA while it is 120 in the second-stage OPA.The total signal gain of optical parametric chirped pulse amplification (OPCPA) can reach 1.8×10 6.     

Uniform oscillations of supercontinua

Uniform oscillations of supercontinua, generated with microstructured fibre, have been observed and investigated. The oscillations are uniform in the sense that the optical power through the fibre changes with a regular and periodic waveform and the spectral bandwidth of the transmitted light changes correspondingly. The oscillations are continuous over periods of hours and the spectral width ranges from the octave-spanning condition (～310-THz wide at 20 dB below the maximum) to zero broadening of the input light. The corresponding contrast ratio of the fluctuating output light signal is as high as 0.75. Silica photonic crystal fibre with hexagonal air-hole structure and core diameter of 2.0 μm was used for the supercontinuum generation. The oscillations are produced when at least 15 mm of fibre is allowed to extend from the mount of the fibre launcher. Arguments in terms of thermal behaviour are used in an attempt to explain the fluctuations of light through the microstructured fibre. This appears to be the first occasion in which such behaviour has been reported.     

The measurement of sperm motility by the fibre optic Doppler anemometer as a prediction of bovine fertility

The fibre optic Doppler anemometer (FODA) has been used to develop an accurate quantitative method of routinely assessing bull fertility. This method is of importance to the artificial insemination industry because the present qualitative estimation, performed by viewing semen using a microscope, can only set broad limits of quality.Laser light from the FODA was directed into diluted semen samples and the back scattered light was measured. A digital correlator was used to calculate the signal correlation of the back scattered light. The resultant data curves were interpreted in terms of the collective motility and swimming speed of the spermatozoa using a microcomputer. These two parameters are accepted as being indicative of fertility. The accuracy of this method is demonstrated by examination of results obtained in an experiment where enzymes, thought to alter fertility, were added to semen. The effect of the enzymes on the swimming speed and motility was clearly demonstrated.     

Dynamics of erbium-doped fibre laser with optical delay feedback and chaotic synchronization

The dynamical behaviour of the erbium-doped fibre single-ring laser with an optical delay feedback is discussed. Simulation shows that as the delay rate increases, the lasing light displays period-doubling which leads to chaos and via reverse period-doubling route returns from chaos to periodic. At a particular delay rate the intermittently chaotic route to chaos is also observed. The identical synchronization based on chaos in this ring laser is demonstrated by numerical simulation.     

Fully automatic system for the coupling alignment of optical fibres

To realize the low-loss connection of two optical fibres intended as a transmission medium for optical signals, very tight tolerances have to be observed on account of the small geometrical dimensions involved. The present work describes a fully automatic system for the alignment of optical fibres in thex-y planes relative to a light source, which has only a single intensity peak, so that maximum optical power is launched into the fibre. The light source can be, for instance, the radiating end of a fibre, a semi-conductor laser or a light-emitting diode. The optical power coupled into the fibre serves as the control signal. Three precision displacement stages driven by stepping motors serve to align the fibres. Various sequential control algorithms for optimal coupling are investigated with reference to theory. Two algorithms are tested with the aid of a computer with reference to the alignment accuracy and speed requirements which have to be met and the one shown by theoretical simulation to be the more favourable is selected for technical realization. The resulting system was used for numerous alignment operations for the coupling of two graded-index fibres. The alignment time is below 1 s and the coupling efficiency compared with manual coupling alignment efficiency (= 100%) is above 99%, corresponding to an additional loss of <0.05 dB.     

Numerical simulation of a gradient-index fibre probe and its properties of light propagation

In order to verify the properties of the light propagating through a gradient-index (GRIN) fibre probe for optical coherence tomography (OCT), numerical simulation using the optical software GLAD is carried out. Firstly, the model of the GRIN fibre probe is presented, which is consisted of a single mode fibre (SMF), a no-core fibre (NCF), a GRIN fibre lens and an air path. Then, the software GLAD is adopted to numerically investigate how the lengths of the NCF and the GRIN fibre lens influence the performance of the Gaussian beam focusing through the GRIN fibre probe. The simulation results are well consistent with the experimental ones, showing that the GLAD based numerical simulation technique is an intuitive and effective tool for the verification of the properties of the light propagation. In this paper, we find that on the conditions of a constant GRIN fibre lens length of 0.1 mm and an NCF length of 0.36 mm, the working distance of the probe will be 0.75 mm and the focus spot size is 32 μm.     

Random distributed feedback fibre lasers

The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with “negative absorption” of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors–random distributed feedback fibre laser–was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100 km. Although an effective reflection due to the Rayleigh scattering is extremely small (∼0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the generation of a stationary near-Gaussian beam with a narrow spectrum. A random distributed feedback fibre laser has efficiency and performance that are comparable to and even exceed those of similar conventional fibre lasers. The key features of the generated radiation of random distributed feedback fibre lasers include: a stationary narrow-band continuous modeless spectrum that is free of mode competition, nonlinear power broadening, and an output beam with a Gaussian profile in the fundamental transverse mode (generated both in single mode and multi-mode fibres).