NTO二聚体分子间相互作用的理论研究

在DFT-B3LYP/6-311＋＋G**水平上求得NTO二聚体势能面上六种优化构型和电子结构. 经基组叠加误差(BSSE)和零点能(ZPE)校正, 求得分子间最大相互作用能为－53.66 kJ/mol. 二子体系间的电荷转移很少. 由自然键轨道分析揭示了相互作用的本质. 对优化构型进行振动分析, 并基于统计热力学求得200.0～800.0 K温度范围从单体形成二聚体的热力学性质变化. 发现二聚主要由强氢键所贡献, 但结合能大小并不为氢键所完全决定. 二聚过程在较低温度或常温下能自发进行.     

1H-ANTA二聚体分子间相互作用的密度泛函理论研究

在DFT-B3LYP/6-311＋＋G**水平上求得1H-3-硝基-5-氨基-1,2,4-三唑(1H-ANTA)二聚体势能面上5种优化构型和电子结构. 经基组叠加误差(BSSE)和零点能(ZPE)校正, 求得分子间最大结合能为70.63 kJ/mol. 二聚体的形成使电荷向三唑环转移. 由氢键强弱推断二聚体稳定性的顺序与结合能顺序相一致, 氢键是二聚体的主要作用形式. 对优化构型进行振动分析, 并基于统计热力学求得200.0～800.0 K温度范围内单体形成二聚体的热力学性质变化. 发现在该温度范围所有二聚过程均能自发进行.     

3-硝基-1,2,4-三唑-5-酮与NH3及H2O分子间相互作用的理论研究

在DFT—B3LYP／6—311 G^**水平上,求得3-硝基-1,2,4-三唑-5-酮(NTO)／NH3和NTO／H2O两种超分子体系势能面上5种全优化构型．经基组叠加误差(BSSE)和零点能(ZPE)校正,求得NTO与NH3和H2O的分子间最大相互作用能依次为-37．58和-30．14kJ／mol,表明NTO与NH3的分子问相互作用强于与H2O的作用．超分子体系中电子均由NH3或H2O向NTO转移,相互作用能主要由强氢键所贡献,由自然键轨道分析揭示了相瓦作用的本质．对优化构型进行振动分析,并基于统计热力学求得200．0～800．0K温度范围从单体形成超分子的热力学性质变化．发现由NTO和NH3形成超分子Ⅱ和Ⅲ在常温下可自发进行;而NTO和H2O只在低温下才能自发形成Ⅳ,Ⅴ和Ⅵ超分子．     

3-硝基-1,2,4-三唑-5-酮与NH3及H2O分子间相互作用的理论研究

在DFT-B3LYP/6-311＋＋G**水平上, 求得3-硝基-1,2,4-三唑-5-酮(NTO)/NH₃和NTO/H₂O两种超分子体系势能面上5种全优化构型. 经基组叠加误差(BSSE)和零点能(ZPE)校正, 求得NTO与NH₃和H₂O的分子间最大相互作用能依次为－37.58和－30.14 kJ/mol, 表明NTO与NH₃的分子间相互作用强于与H₂O的作用. 超分子体系中电子均由NH₃或H₂O向NTO转移, 相互作用能主要由强氢键所贡献, 由自然键轨道分析揭示了相互作用的本质. 对优化构型进行振动分析, 并基于统计热力学求得200.0～800.0 K温度范围从单体形成超分子的热力学性质变化. 发现由NTO和NH₃形成超分子II和III在常温下可自发进行; 而NTO和H₂O只在低温下才能自发形成IV, V和VI超分子.     

硝酸乙酯分子间相互作用的ab initio研究

在abinitio-HF/6-31G水平上求得硝酸乙酯二聚体势能面上的四种优化构型和电子结构。经MP2电子相关校正和基组叠加误差(BSSE)以及零点能(ZPE)校正，求得二聚体的最大结合能为11.46kJ.mol^-^1，还进行HF/6-311G和HF/6-311++G水平的总能量比较计算，发现6-31G基组对计算结合能比较适合，二子体系间的电荷转移很少，对优化构型进行振动分析，并基于统计热力学求得从单体形成二聚体的热力学性质变化。     

硝酸甲酯分子间相互作用的DFT和ab initio比较

用密度泛函理论(DFT)和从头算(ab initio)方法,分别在B3LYP/6 31G和HF/6 31G水平上求得硝酸甲酯三种二聚体的全优化几何构型和电子结构,并用6 311G和6 311＋＋G基组进行总能量计算.对HF/6 31G计算结果进行MP4SDTQ电子相关校正.在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能.对6 31G优化构型作振动分析并基于统计热力学求得200～600 K温度下单体和二聚体的热力学性质.详细比较两种方法的相应计算结果,发现DFT求得的分子间距离较短,分子内键长较长,所得结合能均小于相应ab initio计算值.     

B炸药主要组分TNT和RDX分子间相互作用的理论研究

在B3LYP/6-31G(d)水平上研究了B炸药的主要成分--2,4,6-三硝基甲苯(TNT)与环三亚甲基三硝胺(RDX)分子间的相互作用, 得到了10种TNT＋RDX的全优化构型. 讨论了稳定构型在几何参数、稳定性、红外光谱和电荷分布上的差异. 借助自然键轨道(NBO)理论揭示了TNT与RDX分子间相互作用的本质, 主要由氢键所贡献. 分子间相互作用能在－3.930～－14.652 kJ•mol^－1之间, 经基组叠加误差(BSSE)校正, 相互作用能顺序为VI＞III＞V＞IV＞X＞I＞IX＞II＞VII＞VIII. 对全优化构型进行了热力学性质的分析, 探讨了由单体分子形成混合体系的热力学性质的变化, 结果发现, 形成分子间氢键是个放热过程. 运用Kamlet-Jacobs方程基于理论密度(ρ)估算了混合体系TNT＋RDX的爆轰性质爆速(D)和爆压(p), 与文献值进行比较表明理论计算方法和结果是可靠的.     

TATB二聚体分子间作用力及其气相几何构型研究

采用对称性匹配微扰理论(SAPT)定量地求得TATB分子间的静电、交换排斥、诱导和色散等分子间作用能项, 从理论上揭示了TATB分子间作用本质; 在此基础上, 阐明了密度泛函在研究TATB二聚体时的适合性问题. 结果表明: (1)在有分子间氢键的TATB二聚体中, 库仑力足以与交换排斥力相抗衡, 起主导作用. (2)含分子间氢键的气相TATB二聚体的合理几何构型为平面型结构, 此结构的产生与色散力无关, 因此不管泛函是否含有近程色散作用, 均应预测到这种强极性的平面型结构. (3)在无分子间氢键的TATB二聚体中, 库仑力难以与交换排斥力相抗衡, 色散作用起到了关键作用; (4)在这种情况下, 未含有近程色散作用的密度泛函不可能给出合理构型. 恰好相反, 含有近程色散作用的密度泛函PBE0却能正确地预测到具有“平行重叠”结构且呈微弱极性的TATB二聚体, 色散力是导致这种构型产生的根本原因. “平行重叠”TATB二聚体是典型的色散体系, 其色散力占绝对主导地位并极有可能起源于两个TATB分子上π电子的相互作用. (5)对于所有TATB二聚体, 色散力或很显著或起主导作用. 由于密度泛函或未含有近程色散, 或只能部分地把近程色散表达出来, 这样使得当前所有密度泛函不可能精确求得这些二聚体的作用能.     

α-双环-HMX晶体中二聚作用的理论研究

在四种(分别为HF/6-31G*,MP2/6-31G*,B3LYP/6-31G*和PBE1PBE/6-31G*)水平下,用超分子方法(SM)求得α-双环-HMX(四硝基四氮杂双环辛烷)三种二聚体(I,II和III)中的分子间相互作用能.用对称性匹配微扰理论(SAPT)与密度泛函理论(DFT)相结合的方法[SAPT(DFT)方法]求得该三种二聚体的分子间相互作用能及其分量.在四种SM方法中,以MP2求得的相互作用最强,但均弱于SAPT(DFT)的计算结果.SM和SAPT(DFT)两种方法求得的相互作用,均为IIIIII,归因于三者的分子质心平衡间距(Re)6.58(I)6.95(III)8.60(II).考察SAPT(DFT)方法求得的各作用能分量是IIIIII.密度泛函方法对色散能计算的丢失使其求得的相互作用偏小.     

N-甲硝胺二聚体分子间相互作用的理论研究

用ab initio方法，在HF／6－31G水平下求得N－甲硝胺二聚体势能面上3种优化构型，经MP4和MP2校正电子相关能及校正基组叠加误差（BSSE），求得分子间最大相互作用能为－18．81kJ.mol^-1，甲基内旋转对相互作用能影响较大，在标准状态下，由单体形成最稳定二聚体的自由能变化为10．02kJ.mol^-1，同时还讨论了温度对过程的影响。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.