介孔气体吸附剂

介孔二氧化硅经过表面修饰,赋予介孔材料不同的特性,具有很多的潜在用途,是无机材料研究的热点之一。本文综述了近年来以介孔二氧化硅（M41S 和 SBA）为载体设计的气体吸附剂的研究进展。详细讨论了二氧化碳和可挥发性有机物(VOCs)在介孔吸附剂上的吸附过程;介绍了二氧化碳介孔吸附剂的不同制备方法和影响二氧化碳在介孔吸附剂上吸附的因素,以及介孔吸附剂的结构对可挥发性有机物吸附过程的影响。最后,对介孔气体吸附剂的发展进行了展望。     

Controlled release of volatile (?)-menthol in nanoporous silica materials

In this work, a series of nanoporous silica materials have been prepared as adsorbents for volatile (?)-menthol, a molecule widely used in food, pharmacy, and cosmetics. The isothermal release properties of (?)-menthol have been investigated and correlated with the structural parameters of nanoporous absorbents. A rotary evaporation method is used to effectively load (?)-menthol into the nanopores of adsorbents and to prevent the whisker growth during the adsorption. It is demonstrated that the pore size, structure, wall thickness and surface functionality of nanoporous adsorbents are four important parameters to influence the isothermal release of (?)-menthol. By tuning these parameters of nanoporous silica adsorbents, controlled release of (?)-menthol can be achieved. A vesicular silica material with thick wall and hydrophobic functional groups is shown to possess the slowest release performance. Our contribution provides important knowledge for the future applications of nanoporous silica materials in pharmacy and cosmetics.     

The influence of the structure of the surface of functional organosilicas on the adsorption of cholic acid

High-dispersity silica was modified by functional groups capable of protonating or carrying a constant positive charge. IR and UV spectroscopy, temperature-programmed thermogravimetry, pH metry, and quantitative analysis of grafted compounds were used to determine the structure of the surface of functional organosilicas. The adsorption of primary bile (cholic) acid on silica adsorbents and cholestiramine was studied. The adsorption of cholic acid from solutions with pH 2–8 was substantially higher on adsorbents with positively charged surfaces. The silica adsorbents synthesized were shown to have higher cholic acid adsorption parameters compared with adsorbents used in medicine.     

Effect of chemical modification on carbon dioxide adsorption property of mesoporous silica

Three adsorbents were prepared by different modification methods, which were grafting silica gel with (3-aminopropyl) trimethoxysilane, grafting silica gel with acrylamide polymer, and impregnating silica gel with acrylamide polymer, respectively. The characterization of materials was carried out by N(2) adsorption experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermo-gravimetric analysis, and elemental analyses. The results showed that the amine group was successfully loaded on all three modified adsorbents; among that, the polymer-modified silica adsorbents had higher amine content and larger surface area than the aminopropyl-grafted silica adsorbent and displayed higher thermal stability than the other polymer-modified silica materials previously reported. The CO(2) adsorption/desorption experiments performed at 25°C by TGA-DSC method showed that the highest CO(2) adsorption capacity (0.98 mmol/g) was observed for the polymer-impregnated silica adsorbent. CO(2) adsorbed on all samples was completely desorbed by purging with inert gas at 60°C except for the aminopropyl-grafted silica material, which showed the highest enthalpy of CO(2) adsorption.     

Metal-modified silica adsorbents for removal of humic substances in water

As novel adsorbents for humic substances, Fe-, Mg-, and Ca-modified silica gels SiO(2)Fe, SiO(2)Mg, and SiO(2)Ca were prepared, and their adsorbabilities to humic and fulvic acids were evaluated in water at 25 degrees C for 20 h. Among these adsorbents, SiO(2)Fe indicated the highest adsorbability, in which removing humic substances in water was accomplished to 80-97%. By calcination at 600 degrees C and washing with water, adsorbabilities of the silica adsorbents deteriorated except for the case of calcination of SiO(2)Ca. This is due to changing metal modification structures and losing chlorine, judging from elemental analysis, TG-DTA, and XPS. Especially, the modifier Fe was tightly fixed on the silica surface of SiO(2)Fe, since the metal content was almost constant even after the calcination and water washing unlike the other adsorbents. Therefore, we found that SiO(2)Fe is the most useful adsorbent among the silica adsorbents and that its modification structure is composed of SiOFe, FeCl, and FeOH. In addition, the adsorption mechanism is explained by an interaction between Fe and humic substance molecule having carboxylate and phenolate groups, accompanied with anion exchange of chloride ion Cl(-) for the humic substance molecule via the silica pores. SiO(2)Fe may be applied to an adsorbent alternative for charcoal in water purification plants, and the used SiO(2)Fe may be further reused as a fertilizer since humic substances have plant-glowing ability and silica strengthens plant parts.     

陶瓷基钛掺杂硅胶块体吸附剂研究

以陶瓷纤维纸为基材, 顺次经水玻璃、酸性硫酸氧钛溶液浸渍共沉淀制得新型蜂窝状陶瓷基钛掺杂硅胶块体吸附剂. FTIR谱在波数954 cm^－1附近的特征吸收峰表明钛掺杂硅胶中存在Si-O-Ti键; XRD谱显示掺杂材料为无定型非晶相材料; SEM显示钛掺杂硅胶粒子较好地分散在陶瓷纤维表面及其空隙中; 用EDS及XPS揭示了材料的组成和钛原子含量, 根据钛掺杂前后XPS中Si2p, O1s, Ti2p 3/2电子结合能变化以及²⁹Si MAS NMR中硅原子化学位移差异, 进一步表明钛原子替代硅原子进入了四面体骨架; BET分析显示掺杂材料以中孔为主. 与硅胶相比, 由于钛掺杂, 其比表面积、孔容增大, 吸附性能、耐热性能增强.     

On the activation and deactivation of patch-like carbon-mineral adsorbents

Some possibilities of activation and deactivation of carbon-mineral (silica) adsorbents are discussed. These can be achieved either by hydrothermal treatment of the comples adsorbents at different temperatures or by chemical modification of their mineral part.     

DFT investigation of NH3 physisorption on CuSO4 impregnated SiO2

In this quantum chemical investigation, NH(3) physisorption onto a model of copper sulfate impregnated silica is compared with pure silica and copper sulfate adsorbents. The physisorption process is modeled as direct binding of the NH(3) molecule to the adsorption site of the dry adsorbents and as displacement of a H(2)O molecule by NH(3) in the hydrated complexes. The surface of silica is represented by a hydroxyl group attached to a silsesquioxane cage, H(7)Si(8)O(12)(OH) and silica impregnated with CuSO(4) by the most stable configuration of the cluster containing a CuSO(4) ion pair placed adjacent to the silica cage. H(2)O is systematically added to the dehydrated adsorbents to investigate the role of water in NH(3) adsorption. Modeling hydrated environments of each type of adsorbent is focused on H(2)O molecules that directly coordinate with the active sites. The results indicate that the binding energy of adsorbing NH(3) onto the mixed adsorbent is greater than in pure silica. This enhanced binding in the mixed adsorbent is consistent with improved Br?nsted acidity of the silanol in the presence of CuSO(4).     

Silica Adsorbents with Well-Defined Peracetylated Thiosaccharide Surfaces: Synthesis and Use for Stereoselective Separations in RP and NP HPLC

New chiral silica adsorbents with well-defined peracetylated thiosaccharide (a.k.a. thiosaccharide) surfaces containing 1, 3, 7, and 13 glucose units have been synthesized through the reaction of trimethoxysilyl-derivatives of thiosaccharides with bare silica gel. As determined by FTIR, nitrogen adsorption, thermo-gravimetric analysis, and chemical analysis, the adsorbents prepared contained closely packed uniform monolayer surfaces of thiosaccharide groups grafted to silica. The chromatographic behavior of the thiosaccharide-silicas prepared has been evaluated in the HPLC separations of stereoisomers in both normal and reversed phase modes. With the exception of low grafted thiomaltodecatriose-silica, there was no effect of the size of thiosaccharide on the selectivity of the separations.     

The structure and adsorption properties of colloidal silica used in toothpastes

The dispersity, specific surface area, porosity, and pore size distribution are determined for samples of colloidal silica and calcium o-phosphate, toothpaste constituents. The results obtained show that adsorbents have the developed mesoporous structure. It was found that the adsorption of sodium lauryl sulfate and a nonionic surfactant, glyceryl monocaprylate, at the aqueous surfactant solution-colloidal silica interface is small and has the unusual character. The reasons for a low adsorption of surfactants and their mixtures on the surface of the studied adsorbents are discussed.     

Silica Adsorbents with Well-Defined Peracetylated Thiosaccharide Surfaces: Synthesis and Use for Stereoselective Separations in RP and NP HPLC

New chiral silica adsorbents with well-defined peracetylated thiosaccharide (a.k.a. thiosaccharide) surfaces containing 1, 3, 7, and 13 glucose units have been synthesized through the reaction of trimethoxysilyl-derivatives of thiosaccharides with bare silica gel. As determined by FTIR, nitrogen adsorption, thermo-gravimetric analysis, and chemical analysis, the adsorbents prepared contained closely packed uniform monolayer surfaces of thiosaccharide groups grafted to silica. The chromatographic behavior of the thiosaccharide-silicas prepared has been evaluated in the HPLC separations of stereoisomers in both normal and reversed phase modes. With the exception of low grafted thiomaltodecatriose-silica, there was no effect of the size of thiosaccharide on the selectivity of the separations.

     

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

A one-pot template-free route was developed for the synthesis of novel tetraethylenepentamine modified porous silica as CO₂ adsorbents, the obtained materials were characterized by N₂ adsorption/desorption, thermogravimetry, elemental analysis, Fourier transform infrared spectrometry,scanning electron microscopy and transmission electron microscopy. It was found that the amine species were inserted into the silica skeleton, which considerably enhanced their dispersion. Compared with similar materials derived from impregnation, the porous structure of the silica can be better reserved, leading to a promising CO₂ adsorption capacity of 3.98 mmol CO₂/g-adsorbent and a fast adsorption kinetic in simulated flue gas at 348 K. The resulted adsorbents could also be easily regenerated and showed a good durability in multiple adsorption–desorption cycles. All these features make this method a promising option for the preparation of CO₂ adsorbents.     

Graphene‐encapsulated silica as matrix solid‐phase dispersion extraction sorbents for the analysis of poly‐methoxylated flavonoids in the leaves of Murraya panaculata (L.) Jack

In this study, graphene‐encapsulated silica was synthesized by a hydrothermal reduction strategy. The presence of silica in graphene was identified by Fourier‐transform infrared spectrometry, X‐ray diffraction and scanning electron microscopy. The graphene‐encapsulated silica subsequently was used as adsorbent for matrix solid‐phase dispersion extraction of poly‐methoxylated flavonoids from the dried leaves of Murraya panaculata (L.) Jack. Compared with the other adsorbents (graphene, silica gel, C₁₈ silica, neutral alumina, diatomaceous earth) and without any adsorbents, better results were obtained. Then a method for analysis of poly‐methoxylated flavonoids was established by coupling matrix solid‐phase dispersion extraction with ultra high performance liquid chromatography and UV detection. Compared with reflux extraction and ultrasonic extraction, the proposed method is quicker, more efficient and more environmental protection. Less than 10 min is needed from extraction to detection.     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.     

Controlled-porosity glasses as alternative adsorbents to silica gel for HPLC

Summary The paper deals with the use of controlled-porosity glasses (CPGs) as adsorbents for HPLC. The physicochemical and chromatographic properties of small-pore CPGs are compared to the analogous properties of silica gels. The results show good correlation between them and suggest the possibility of application of CPGs as adsorbents for liquid chromatography.     

从介孔分子筛原粉研制高效吸附二氧化碳的有机胺-介孔复合材料

固态有机胺二氧化碳吸附剂具有高选择性、低腐蚀性、易再生等特点,有着减少二氧化碳排放的潜在应用前景.但是,如何在大量引入氨基的同时,保持氨基在载体上具有高分散度是制备固态胺吸附剂的难题.本文综述了近年来固体胺二氧化碳吸附剂的研究进展,重点介绍开拓利用介孔分子筛原粉的分级结构,将有机胺涂布到介孔分子筛孔道中的丝状胶束以及胶束和硅壁之间的间隙中,可以显著地提高二氧化碳的吸附量.     

Preparation and modification of complex pyrolytic carbon-silica adsorbents

Summary The surface properties of complex adsorbents prepared through the pyrolysis of dichloromethane on the surface of silica gel were investigated. The reaction was carried out in a specially constructed reactor at 400–500°C. The construction and performance of the reactor are described. The modification of the silica gel surface by pyrogenic carbon results in its chemical but not energetical homogeneity. Such adsorbents usually show strong adsorptive properties which limits their use in chromatography. A simple method of homogenizing the porous structure and energetic properties of the adsorptive centers of such adsorbents is presented. The method consists of an additional pyrolysis of an alcohol or other substances on the surface of the carbon-silica adsorbent. Such reactions were carried out under both static and dynamic conditions. The properties of the modified adsorbent depend on the reaction conditions and on the type of the additionally pyrolysed substance.     

Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

Effect of pore size on the performance of composite adsorbent

Three kinds of commercial silica gels with pore size of 2–3, 4–7 and 8–10 nm respectively are used for preparing composite adsorbents by soaking them into the aqueous solution of calcium chloride. The test result indicates that both the water uptake and adsorption rate of composite adsorbents prepared from 4–7 and 8–10 nm silica gels improve greatly compared to pure silica gels, but they do not for 2–3 nm silica gels. The silica gel with pore size of 2–3 nm is not suitable for preparing the composite adsorbent by impregnation method due to the pore blockage because of the small pore size. The SCP and COP of the adsorption chiller with sample SA50 are 128.3 Wkg^?1 and 0.27 respectively at the hot source temperature of 90 °C, which are largely superior to that of SA0. Hence using the composite adsorbent instead of the pure silica gel can reduce the size of the adsorption chiller.     

Comparison of log k′ — solvent composition relationships in thinlayer and column chromatography for systems of the type: Silanized silica — water + methanol

Relationships between log k' values of polynuclear hydrocarbons and composition of water/methanol mixtures were determined for HPTLC on RP-18 silica and for HPLC using RP-2 silica. In spite of differences in the adsorbents used, a good correlation between HPLC and TLC parameters was found. In the TLC experiments, a sandwich tank with a modified solvent distributor was used. It has been reported that thin-layer chromatography is a good technique for the preliminary optimization of column chromatographic separations [1–5]. So far, the comparison of TLC and HPLC has been mainly restricted to silica as the adsorbent. Since TLC plates precoated with silanized adsorbents recently became commercially available, it seemed interesting to compare the chromatographic parameters obtained for the “reversed phase” systems with the two techniques (see also ref. 6).